diff options
Diffstat (limited to 'drivers/staging/irda/drivers/smsc-ircc2.c')
| -rw-r--r-- | drivers/staging/irda/drivers/smsc-ircc2.c | 3026 |
1 files changed, 0 insertions, 3026 deletions
diff --git a/drivers/staging/irda/drivers/smsc-ircc2.c b/drivers/staging/irda/drivers/smsc-ircc2.c deleted file mode 100644 index 19a55cba6beb..000000000000 --- a/drivers/staging/irda/drivers/smsc-ircc2.c +++ /dev/null @@ -1,3026 +0,0 @@ -/********************************************************************* - * - * Description: Driver for the SMC Infrared Communications Controller - * Author: Daniele Peri (peri@csai.unipa.it) - * Created at: - * Modified at: - * Modified by: - * - * Copyright (c) 2002 Daniele Peri - * All Rights Reserved. - * Copyright (c) 2002 Jean Tourrilhes - * Copyright (c) 2006 Linus Walleij - * - * - * Based on smc-ircc.c: - * - * Copyright (c) 2001 Stefani Seibold - * Copyright (c) 1999-2001 Dag Brattli - * Copyright (c) 1998-1999 Thomas Davis, - * - * and irport.c: - * - * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/rtnetlink.h> -#include <linux/serial_reg.h> -#include <linux/dma-mapping.h> -#include <linux/pnp.h> -#include <linux/platform_device.h> -#include <linux/gfp.h> - -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/byteorder.h> - -#include <linux/spinlock.h> -#include <linux/pm.h> -#ifdef CONFIG_PCI -#include <linux/pci.h> -#endif - -#include <net/irda/wrapper.h> -#include <net/irda/irda.h> -#include <net/irda/irda_device.h> - -#include "smsc-ircc2.h" -#include "smsc-sio.h" - - -MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>"); -MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver"); -MODULE_LICENSE("GPL"); - -static bool smsc_nopnp = true; -module_param_named(nopnp, smsc_nopnp, bool, 0); -MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults to true"); - -#define DMA_INVAL 255 -static int ircc_dma = DMA_INVAL; -module_param_hw(ircc_dma, int, dma, 0); -MODULE_PARM_DESC(ircc_dma, "DMA channel"); - -#define IRQ_INVAL 255 -static int ircc_irq = IRQ_INVAL; -module_param_hw(ircc_irq, int, irq, 0); -MODULE_PARM_DESC(ircc_irq, "IRQ line"); - -static int ircc_fir; -module_param_hw(ircc_fir, int, ioport, 0); -MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); - -static int ircc_sir; -module_param_hw(ircc_sir, int, ioport, 0); -MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); - -static int ircc_cfg; -module_param_hw(ircc_cfg, int, ioport, 0); -MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); - -static int ircc_transceiver; -module_param(ircc_transceiver, int, 0); -MODULE_PARM_DESC(ircc_transceiver, "Transceiver type"); - -/* Types */ - -#ifdef CONFIG_PCI -struct smsc_ircc_subsystem_configuration { - unsigned short vendor; /* PCI vendor ID */ - unsigned short device; /* PCI vendor ID */ - unsigned short subvendor; /* PCI subsystem vendor ID */ - unsigned short subdevice; /* PCI subsystem device ID */ - unsigned short sir_io; /* I/O port for SIR */ - unsigned short fir_io; /* I/O port for FIR */ - unsigned char fir_irq; /* FIR IRQ */ - unsigned char fir_dma; /* FIR DMA */ - unsigned short cfg_base; /* I/O port for chip configuration */ - int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */ - const char *name; /* name shown as info */ -}; -#endif - -struct smsc_transceiver { - char *name; - void (*set_for_speed)(int fir_base, u32 speed); - int (*probe)(int fir_base); -}; - -struct smsc_chip { - char *name; - #if 0 - u8 type; - #endif - u16 flags; - u8 devid; - u8 rev; -}; - -struct smsc_chip_address { - unsigned int cfg_base; - unsigned int type; -}; - -/* Private data for each instance */ -struct smsc_ircc_cb { - struct net_device *netdev; /* Yes! we are some kind of netdevice */ - struct irlap_cb *irlap; /* The link layer we are binded to */ - - chipio_t io; /* IrDA controller information */ - iobuff_t tx_buff; /* Transmit buffer */ - iobuff_t rx_buff; /* Receive buffer */ - dma_addr_t tx_buff_dma; - dma_addr_t rx_buff_dma; - - struct qos_info qos; /* QoS capabilities for this device */ - - spinlock_t lock; /* For serializing operations */ - - __u32 new_speed; - __u32 flags; /* Interface flags */ - - int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */ - int tx_len; /* Number of frames in tx_buff */ - - int transceiver; - struct platform_device *pldev; -}; - -/* Constants */ - -#define SMSC_IRCC2_DRIVER_NAME "smsc-ircc2" - -#define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600 -#define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1 -#define SMSC_IRCC2_C_NET_TIMEOUT 0 -#define SMSC_IRCC2_C_SIR_STOP 0 - -static const char *driver_name = SMSC_IRCC2_DRIVER_NAME; - -/* Prototypes */ - -static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq); -static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base); -static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq); -static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self); -static void smsc_ircc_init_chip(struct smsc_ircc_cb *self); -static int __exit smsc_ircc_close(struct smsc_ircc_cb *self); -static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self); -static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self); -static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self); -static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb, - struct net_device *dev); -static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb, - struct net_device *dev); -static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs); -static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self); -static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed); -static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed); -static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id); -static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev); -static void smsc_ircc_sir_start(struct smsc_ircc_cb *self); -#if SMSC_IRCC2_C_SIR_STOP -static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self); -#endif -static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self); -static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len); -static int smsc_ircc_net_open(struct net_device *dev); -static int smsc_ircc_net_close(struct net_device *dev); -static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -#if SMSC_IRCC2_C_NET_TIMEOUT -static void smsc_ircc_timeout(struct net_device *dev); -#endif -static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self); -static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self); -static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed); -static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self); - -/* Probing */ -static int __init smsc_ircc_look_for_chips(void); -static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); -static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); -static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); -static int __init smsc_superio_fdc(unsigned short cfg_base); -static int __init smsc_superio_lpc(unsigned short cfg_base); -#ifdef CONFIG_PCI -static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); -static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); -static void __init preconfigure_ali_port(struct pci_dev *dev, - unsigned short port); -static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); -static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, - unsigned short ircc_fir, - unsigned short ircc_sir, - unsigned char ircc_dma, - unsigned char ircc_irq); -#endif - -/* Transceivers specific functions */ - -static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed); -static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base); -static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed); -static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base); -static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed); -static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); - -/* Power Management */ - -static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state); -static int smsc_ircc_resume(struct platform_device *dev); - -static struct platform_driver smsc_ircc_driver = { - .suspend = smsc_ircc_suspend, - .resume = smsc_ircc_resume, - .driver = { - .name = SMSC_IRCC2_DRIVER_NAME, - }, -}; - -/* Transceivers for SMSC-ircc */ - -static struct smsc_transceiver smsc_transceivers[] = -{ - { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 }, - { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select }, - { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc }, - { NULL, NULL } -}; -#define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1) - -/* SMC SuperIO chipsets definitions */ - -#define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */ -#define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */ -#define NoIRDA 2 /* SuperIO Chip has no IRDA Port */ -#define SIR 0 /* SuperIO Chip has only slow IRDA */ -#define FIR 4 /* SuperIO Chip has fast IRDA */ -#define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */ - -static struct smsc_chip __initdata fdc_chips_flat[] = -{ - /* Base address 0x3f0 or 0x370 */ - { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */ - { "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 }, - { "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 }, - { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 }, - { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */ - { "37C78", KEY55_2|NoIRDA, 0x78, 0x00 }, - { "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 }, - { "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 }, - { NULL } -}; - -static struct smsc_chip __initdata fdc_chips_paged[] = -{ - /* Base address 0x3f0 or 0x370 */ - { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 }, - { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 }, - { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 }, - { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 }, - { "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 }, - { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 }, - { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 }, - { "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 }, - { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 }, - { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 }, - { "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 }, - { "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 }, - { "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 }, - { NULL } -}; - -static struct smsc_chip __initdata lpc_chips_flat[] = -{ - /* Base address 0x2E or 0x4E */ - { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 }, - { "47N227", KEY55_1|FIR|SERx4, 0x7a, 0x00 }, - { "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 }, - { NULL } -}; - -static struct smsc_chip __initdata lpc_chips_paged[] = -{ - /* Base address 0x2E or 0x4E */ - { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 }, - { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 }, - { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 }, - { "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 }, - { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 }, - { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 }, - { "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 }, - { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 }, - { NULL } -}; - -#define SMSCSIO_TYPE_FDC 1 -#define SMSCSIO_TYPE_LPC 2 -#define SMSCSIO_TYPE_FLAT 4 -#define SMSCSIO_TYPE_PAGED 8 - -static struct smsc_chip_address __initdata possible_addresses[] = -{ - { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, - { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, - { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, - { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, - { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, - { 0, 0 } -}; - -/* Globals */ - -static struct smsc_ircc_cb *dev_self[] = { NULL, NULL }; -static unsigned short dev_count; - -static inline void register_bank(int iobase, int bank) -{ - outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)), - iobase + IRCC_MASTER); -} - -/* PNP hotplug support */ -static const struct pnp_device_id smsc_ircc_pnp_table[] = { - { .id = "SMCf010", .driver_data = 0 }, - /* and presumably others */ - { } -}; -MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table); - -static int pnp_driver_registered; - -#ifdef CONFIG_PNP -static int smsc_ircc_pnp_probe(struct pnp_dev *dev, - const struct pnp_device_id *dev_id) -{ - unsigned int firbase, sirbase; - u8 dma, irq; - - if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && - pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0))) - return -EINVAL; - - sirbase = pnp_port_start(dev, 0); - firbase = pnp_port_start(dev, 1); - dma = pnp_dma(dev, 0); - irq = pnp_irq(dev, 0); - - if (smsc_ircc_open(firbase, sirbase, dma, irq)) - return -ENODEV; - - return 0; -} - -static struct pnp_driver smsc_ircc_pnp_driver = { - .name = "smsc-ircc2", - .id_table = smsc_ircc_pnp_table, - .probe = smsc_ircc_pnp_probe, -}; -#else /* CONFIG_PNP */ -static struct pnp_driver smsc_ircc_pnp_driver; -#endif - -/******************************************************************************* - * - * - * SMSC-ircc stuff - * - * - *******************************************************************************/ - -static int __init smsc_ircc_legacy_probe(void) -{ - int ret = 0; - -#ifdef CONFIG_PCI - if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) { - /* Ignore errors from preconfiguration */ - net_err_ratelimited("%s, Preconfiguration failed !\n", - driver_name); - } -#endif - - if (ircc_fir > 0 && ircc_sir > 0) { - net_info_ratelimited(" Overriding FIR address 0x%04x\n", - ircc_fir); - net_info_ratelimited(" Overriding SIR address 0x%04x\n", - ircc_sir); - - if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq)) - ret = -ENODEV; - } else { - ret = -ENODEV; - - /* try user provided configuration register base address */ - if (ircc_cfg > 0) { - net_info_ratelimited(" Overriding configuration address 0x%04x\n", - ircc_cfg); - if (!smsc_superio_fdc(ircc_cfg)) - ret = 0; - if (!smsc_superio_lpc(ircc_cfg)) - ret = 0; - } - - if (smsc_ircc_look_for_chips() > 0) - ret = 0; - } - return ret; -} - -/* - * Function smsc_ircc_init () - * - * Initialize chip. Just try to find out how many chips we are dealing with - * and where they are - */ -static int __init smsc_ircc_init(void) -{ - int ret; - - pr_debug("%s\n", __func__); - - ret = platform_driver_register(&smsc_ircc_driver); - if (ret) { - net_err_ratelimited("%s, Can't register driver!\n", - driver_name); - return ret; - } - - dev_count = 0; - - if (smsc_nopnp || !pnp_platform_devices || - ircc_cfg || ircc_fir || ircc_sir || - ircc_dma != DMA_INVAL || ircc_irq != IRQ_INVAL) { - ret = smsc_ircc_legacy_probe(); - } else { - if (pnp_register_driver(&smsc_ircc_pnp_driver) == 0) - pnp_driver_registered = 1; - } - - if (ret) { - if (pnp_driver_registered) - pnp_unregister_driver(&smsc_ircc_pnp_driver); - platform_driver_unregister(&smsc_ircc_driver); - } - - return ret; -} - -static netdev_tx_t smsc_ircc_net_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct smsc_ircc_cb *self = netdev_priv(dev); - - if (self->io.speed > 115200) - return smsc_ircc_hard_xmit_fir(skb, dev); - else - return smsc_ircc_hard_xmit_sir(skb, dev); -} - -static const struct net_device_ops smsc_ircc_netdev_ops = { - .ndo_open = smsc_ircc_net_open, - .ndo_stop = smsc_ircc_net_close, - .ndo_do_ioctl = smsc_ircc_net_ioctl, - .ndo_start_xmit = smsc_ircc_net_xmit, -#if SMSC_IRCC2_C_NET_TIMEOUT - .ndo_tx_timeout = smsc_ircc_timeout, -#endif -}; - -/* - * Function smsc_ircc_open (firbase, sirbase, dma, irq) - * - * Try to open driver instance - * - */ -static int smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) -{ - struct smsc_ircc_cb *self; - struct net_device *dev; - int err; - - pr_debug("%s\n", __func__); - - err = smsc_ircc_present(fir_base, sir_base); - if (err) - goto err_out; - - err = -ENOMEM; - if (dev_count >= ARRAY_SIZE(dev_self)) { - net_warn_ratelimited("%s(), too many devices!\n", __func__); - goto err_out1; - } - - /* - * Allocate new instance of the driver - */ - dev = alloc_irdadev(sizeof(struct smsc_ircc_cb)); - if (!dev) { - net_warn_ratelimited("%s() can't allocate net device\n", - __func__); - goto err_out1; - } - -#if SMSC_IRCC2_C_NET_TIMEOUT - dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */ -#endif - dev->netdev_ops = &smsc_ircc_netdev_ops; - - self = netdev_priv(dev); - self->netdev = dev; - - /* Make ifconfig display some details */ - dev->base_addr = self->io.fir_base = fir_base; - dev->irq = self->io.irq = irq; - - /* Need to store self somewhere */ - dev_self[dev_count] = self; - spin_lock_init(&self->lock); - - self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE; - self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE; - - self->rx_buff.head = - dma_zalloc_coherent(NULL, self->rx_buff.truesize, - &self->rx_buff_dma, GFP_KERNEL); - if (self->rx_buff.head == NULL) - goto err_out2; - - self->tx_buff.head = - dma_zalloc_coherent(NULL, self->tx_buff.truesize, - &self->tx_buff_dma, GFP_KERNEL); - if (self->tx_buff.head == NULL) - goto err_out3; - - self->rx_buff.in_frame = FALSE; - self->rx_buff.state = OUTSIDE_FRAME; - self->tx_buff.data = self->tx_buff.head; - self->rx_buff.data = self->rx_buff.head; - - smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq); - smsc_ircc_setup_qos(self); - smsc_ircc_init_chip(self); - - if (ircc_transceiver > 0 && - ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS) - self->transceiver = ircc_transceiver; - else - smsc_ircc_probe_transceiver(self); - - err = register_netdev(self->netdev); - if (err) { - net_err_ratelimited("%s, Network device registration failed!\n", - driver_name); - goto err_out4; - } - - self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME, - dev_count, NULL, 0); - if (IS_ERR(self->pldev)) { - err = PTR_ERR(self->pldev); - goto err_out5; - } - platform_set_drvdata(self->pldev, self); - - net_info_ratelimited("IrDA: Registered device %s\n", dev->name); - dev_count++; - - return 0; - - err_out5: - unregister_netdev(self->netdev); - - err_out4: - dma_free_coherent(NULL, self->tx_buff.truesize, - self->tx_buff.head, self->tx_buff_dma); - err_out3: - dma_free_coherent(NULL, self->rx_buff.truesize, - self->rx_buff.head, self->rx_buff_dma); - err_out2: - free_netdev(self->netdev); - dev_self[dev_count] = NULL; - err_out1: - release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); - release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); - err_out: - return err; -} - -/* - * Function smsc_ircc_present(fir_base, sir_base) - * - * Check the smsc-ircc chip presence - * - */ -static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) -{ - unsigned char low, high, chip, config, dma, irq, version; - - if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT, - driver_name)) { - net_warn_ratelimited("%s: can't get fir_base of 0x%03x\n", - __func__, fir_base); - goto out1; - } - - if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT, - driver_name)) { - net_warn_ratelimited("%s: can't get sir_base of 0x%03x\n", - __func__, sir_base); - goto out2; - } - - register_bank(fir_base, 3); - - high = inb(fir_base + IRCC_ID_HIGH); - low = inb(fir_base + IRCC_ID_LOW); - chip = inb(fir_base + IRCC_CHIP_ID); - version = inb(fir_base + IRCC_VERSION); - config = inb(fir_base + IRCC_INTERFACE); - dma = config & IRCC_INTERFACE_DMA_MASK; - irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; - - if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { - net_warn_ratelimited("%s(), addr 0x%04x - no device found!\n", - __func__, fir_base); - goto out3; - } - net_info_ratelimited("SMsC IrDA Controller found\n IrCC version %d.%d, firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n", - chip & 0x0f, version, - fir_base, sir_base, dma, irq); - - return 0; - - out3: - release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); - out2: - release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); - out1: - return -ENODEV; -} - -/* - * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq) - * - * Setup I/O - * - */ -static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, - unsigned int fir_base, unsigned int sir_base, - u8 dma, u8 irq) -{ - unsigned char config, chip_dma, chip_irq; - - register_bank(fir_base, 3); - config = inb(fir_base + IRCC_INTERFACE); - chip_dma = config & IRCC_INTERFACE_DMA_MASK; - chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; - - self->io.fir_base = fir_base; - self->io.sir_base = sir_base; - self->io.fir_ext = SMSC_IRCC2_FIR_CHIP_IO_EXTENT; - self->io.sir_ext = SMSC_IRCC2_SIR_CHIP_IO_EXTENT; - self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE; - self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED; - - if (irq != IRQ_INVAL) { - if (irq != chip_irq) - net_info_ratelimited("%s, Overriding IRQ - chip says %d, using %d\n", - driver_name, chip_irq, irq); - self->io.irq = irq; - } else - self->io.irq = chip_irq; - - if (dma != DMA_INVAL) { - if (dma != chip_dma) - net_info_ratelimited("%s, Overriding DMA - chip says %d, using %d\n", - driver_name, chip_dma, dma); - self->io.dma = dma; - } else - self->io.dma = chip_dma; - -} - -/* - * Function smsc_ircc_setup_qos(self) - * - * Setup qos - * - */ -static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self) -{ - /* Initialize QoS for this device */ - irda_init_max_qos_capabilies(&self->qos); - - self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| - IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); - - self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME; - self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE; - irda_qos_bits_to_value(&self->qos); -} - -/* - * Function smsc_ircc_init_chip(self) - * - * Init chip - * - */ -static void smsc_ircc_init_chip(struct smsc_ircc_cb *self) -{ - int iobase = self->io.fir_base; - - register_bank(iobase, 0); - outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); - outb(0x00, iobase + IRCC_MASTER); - - register_bank(iobase, 1); - outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A), - iobase + IRCC_SCE_CFGA); - -#ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */ - outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), - iobase + IRCC_SCE_CFGB); -#else - outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), - iobase + IRCC_SCE_CFGB); -#endif - (void) inb(iobase + IRCC_FIFO_THRESHOLD); - outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD); - - register_bank(iobase, 4); - outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL); - - register_bank(iobase, 0); - outb(0, iobase + IRCC_LCR_A); - - smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); - - /* Power on device */ - outb(0x00, iobase + IRCC_MASTER); -} - -/* - * Function smsc_ircc_net_ioctl (dev, rq, cmd) - * - * Process IOCTL commands for this device - * - */ -static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct if_irda_req *irq = (struct if_irda_req *) rq; - struct smsc_ircc_cb *self; - unsigned long flags; - int ret = 0; - - IRDA_ASSERT(dev != NULL, return -1;); - - self = netdev_priv(dev); - - IRDA_ASSERT(self != NULL, return -1;); - - pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); - - switch (cmd) { - case SIOCSBANDWIDTH: /* Set bandwidth */ - if (!capable(CAP_NET_ADMIN)) - ret = -EPERM; - else { - /* Make sure we are the only one touching - * self->io.speed and the hardware - Jean II */ - spin_lock_irqsave(&self->lock, flags); - smsc_ircc_change_speed(self, irq->ifr_baudrate); - spin_unlock_irqrestore(&self->lock, flags); - } - break; - case SIOCSMEDIABUSY: /* Set media busy */ - if (!capable(CAP_NET_ADMIN)) { - ret = -EPERM; - break; - } - - irda_device_set_media_busy(self->netdev, TRUE); - break; - case SIOCGRECEIVING: /* Check if we are receiving right now */ - irq->ifr_receiving = smsc_ircc_is_receiving(self); - break; - #if 0 - case SIOCSDTRRTS: - if (!capable(CAP_NET_ADMIN)) { - ret = -EPERM; - break; - } - smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts); - break; - #endif - default: - ret = -EOPNOTSUPP; - } - - return ret; -} - -#if SMSC_IRCC2_C_NET_TIMEOUT -/* - * Function smsc_ircc_timeout (struct net_device *dev) - * - * The networking timeout management. - * - */ - -static void smsc_ircc_timeout(struct net_device *dev) -{ - struct smsc_ircc_cb *self = netdev_priv(dev); - unsigned long flags; - - net_warn_ratelimited("%s: transmit timed out, changing speed to: %d\n", - dev->name, self->io.speed); - spin_lock_irqsave(&self->lock, flags); - smsc_ircc_sir_start(self); - smsc_ircc_change_speed(self, self->io.speed); - netif_trans_update(dev); /* prevent tx timeout */ - netif_wake_queue(dev); - spin_unlock_irqrestore(&self->lock, flags); -} -#endif - -/* - * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev) - * - * Transmits the current frame until FIFO is full, then - * waits until the next transmit interrupt, and continues until the - * frame is transmitted. - */ -static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb, - struct net_device *dev) -{ - struct smsc_ircc_cb *self; - unsigned long flags; - s32 speed; - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;); - - self = netdev_priv(dev); - IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;); - - netif_stop_queue(dev); - - /* Make sure test of self->io.speed & speed change are atomic */ - spin_lock_irqsave(&self->lock, flags); - - /* Check if we need to change the speed */ - speed = irda_get_next_speed(skb); - if (speed != self->io.speed && speed != -1) { - /* Check for empty frame */ - if (!skb->len) { - /* - * We send frames one by one in SIR mode (no - * pipelining), so at this point, if we were sending - * a previous frame, we just received the interrupt - * telling us it is finished (UART_IIR_THRI). - * Therefore, waiting for the transmitter to really - * finish draining the fifo won't take too long. - * And the interrupt handler is not expected to run. - * - Jean II */ - smsc_ircc_sir_wait_hw_transmitter_finish(self); - smsc_ircc_change_speed(self, speed); - spin_unlock_irqrestore(&self->lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - self->new_speed = speed; - } - - /* Init tx buffer */ - self->tx_buff.data = self->tx_buff.head; - - /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ - self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, - self->tx_buff.truesize); - - dev->stats.tx_bytes += self->tx_buff.len; - - /* Turn on transmit finished interrupt. Will fire immediately! */ - outb(UART_IER_THRI, self->io.sir_base + UART_IER); - - spin_unlock_irqrestore(&self->lock, flags); - - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/* - * Function smsc_ircc_set_fir_speed (self, baud) - * - * Change the speed of the device - * - */ -static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) -{ - int fir_base, ir_mode, ctrl, fast; - - IRDA_ASSERT(self != NULL, return;); - fir_base = self->io.fir_base; - - self->io.speed = speed; - - switch (speed) { - default: - case 576000: - ir_mode = IRCC_CFGA_IRDA_HDLC; - ctrl = IRCC_CRC; - fast = 0; - pr_debug("%s(), handling baud of 576000\n", __func__); - break; - case 1152000: - ir_mode = IRCC_CFGA_IRDA_HDLC; - ctrl = IRCC_1152 | IRCC_CRC; - fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA; - pr_debug("%s(), handling baud of 1152000\n", - __func__); - break; - case 4000000: - ir_mode = IRCC_CFGA_IRDA_4PPM; - ctrl = IRCC_CRC; - fast = IRCC_LCR_A_FAST; - pr_debug("%s(), handling baud of 4000000\n", - __func__); - break; - } - #if 0 - Now in tranceiver! - /* This causes an interrupt */ - register_bank(fir_base, 0); - outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A); - #endif - - register_bank(fir_base, 1); - outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA); - - register_bank(fir_base, 4); - outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL); -} - -/* - * Function smsc_ircc_fir_start(self) - * - * Change the speed of the device - * - */ -static void smsc_ircc_fir_start(struct smsc_ircc_cb *self) -{ - struct net_device *dev; - int fir_base; - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(self != NULL, return;); - dev = self->netdev; - IRDA_ASSERT(dev != NULL, return;); - - fir_base = self->io.fir_base; - - /* Reset everything */ - - /* Clear FIFO */ - outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A); - - /* Enable interrupt */ - /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/ - - register_bank(fir_base, 1); - - /* Select the TX/RX interface */ -#ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */ - outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), - fir_base + IRCC_SCE_CFGB); -#else - outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), - fir_base + IRCC_SCE_CFGB); -#endif - (void) inb(fir_base + IRCC_FIFO_THRESHOLD); - - /* Enable SCE interrupts */ - outb(0, fir_base + IRCC_MASTER); - register_bank(fir_base, 0); - outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER); - outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER); -} - -/* - * Function smsc_ircc_fir_stop(self, baud) - * - * Change the speed of the device - * - */ -static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) -{ - int fir_base; - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(self != NULL, return;); - - fir_base = self->io.fir_base; - register_bank(fir_base, 0); - /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/ - outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B); -} - - -/* - * Function smsc_ircc_change_speed(self, baud) - * - * Change the speed of the device - * - * This function *must* be called with spinlock held, because it may - * be called from the irq handler. - Jean II - */ -static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed) -{ - struct net_device *dev; - int last_speed_was_sir; - - pr_debug("%s() changing speed to: %d\n", __func__, speed); - - IRDA_ASSERT(self != NULL, return;); - dev = self->netdev; - - last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED; - - #if 0 - /* Temp Hack */ - speed= 1152000; - self->io.speed = speed; - last_speed_was_sir = 0; - smsc_ircc_fir_start(self); - #endif - - if (self->io.speed == 0) - smsc_ircc_sir_start(self); - - #if 0 - if (!last_speed_was_sir) speed = self->io.speed; - #endif - - if (self->io.speed != speed) - smsc_ircc_set_transceiver_for_speed(self, speed); - - self->io.speed = speed; - - if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) { - if (!last_speed_was_sir) { - smsc_ircc_fir_stop(self); - smsc_ircc_sir_start(self); - } - smsc_ircc_set_sir_speed(self, speed); - } else { - if (last_speed_was_sir) { - #if SMSC_IRCC2_C_SIR_STOP - smsc_ircc_sir_stop(self); - #endif - smsc_ircc_fir_start(self); - } - smsc_ircc_set_fir_speed(self, speed); - - #if 0 - self->tx_buff.len = 10; - self->tx_buff.data = self->tx_buff.head; - - smsc_ircc_dma_xmit(self, 4000); - #endif - /* Be ready for incoming frames */ - smsc_ircc_dma_receive(self); - } - - netif_wake_queue(dev); -} - -/* - * Function smsc_ircc_set_sir_speed (self, speed) - * - * Set speed of IrDA port to specified baudrate - * - */ -static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) -{ - int iobase; - int fcr; /* FIFO control reg */ - int lcr; /* Line control reg */ - int divisor; - - pr_debug("%s(), Setting speed to: %d\n", __func__, speed); - - IRDA_ASSERT(self != NULL, return;); - iobase = self->io.sir_base; - - /* Update accounting for new speed */ - self->io.speed = speed; - - /* Turn off interrupts */ - outb(0, iobase + UART_IER); - - divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed; - - fcr = UART_FCR_ENABLE_FIFO; - - /* - * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and - * almost 1,7 ms at 19200 bps. At speeds above that we can just forget - * about this timeout since it will always be fast enough. - */ - fcr |= self->io.speed < 38400 ? - UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; - - /* IrDA ports use 8N1 */ - lcr = UART_LCR_WLEN8; - - outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */ - outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */ - outb(divisor >> 8, iobase + UART_DLM); - outb(lcr, iobase + UART_LCR); /* Set 8N1 */ - outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ - - /* Turn on interrups */ - outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); - - pr_debug("%s() speed changed to: %d\n", __func__, speed); -} - - -/* - * Function smsc_ircc_hard_xmit_fir (skb, dev) - * - * Transmit the frame! - * - */ -static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb, - struct net_device *dev) -{ - struct smsc_ircc_cb *self; - unsigned long flags; - s32 speed; - int mtt; - - IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;); - self = netdev_priv(dev); - IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;); - - netif_stop_queue(dev); - - /* Make sure test of self->io.speed & speed change are atomic */ - spin_lock_irqsave(&self->lock, flags); - - /* Check if we need to change the speed after this frame */ - speed = irda_get_next_speed(skb); - if (speed != self->io.speed && speed != -1) { - /* Check for empty frame */ - if (!skb->len) { - /* Note : you should make sure that speed changes - * are not going to corrupt any outgoing frame. - * Look at nsc-ircc for the gory details - Jean II */ - smsc_ircc_change_speed(self, speed); - spin_unlock_irqrestore(&self->lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - - self->new_speed = speed; - } - - skb_copy_from_linear_data(skb, self->tx_buff.head, skb->len); - - self->tx_buff.len = skb->len; - self->tx_buff.data = self->tx_buff.head; - - mtt = irda_get_mtt(skb); - if (mtt) { - int bofs; - - /* - * Compute how many BOFs (STA or PA's) we need to waste the - * min turn time given the speed of the link. - */ - bofs = mtt * (self->io.speed / 1000) / 8000; - if (bofs > 4095) - bofs = 4095; - - smsc_ircc_dma_xmit(self, bofs); - } else { - /* Transmit frame */ - smsc_ircc_dma_xmit(self, 0); - } - - spin_unlock_irqrestore(&self->lock, flags); - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/* - * Function smsc_ircc_dma_xmit (self, bofs) - * - * Transmit data using DMA - * - */ -static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs) -{ - int iobase = self->io.fir_base; - u8 ctrl; - - pr_debug("%s\n", __func__); -#if 1 - /* Disable Rx */ - register_bank(iobase, 0); - outb(0x00, iobase + IRCC_LCR_B); -#endif - register_bank(iobase, 1); - outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase + IRCC_SCE_CFGB); - - self->io.direction = IO_XMIT; - - /* Set BOF additional count for generating the min turn time */ - register_bank(iobase, 4); - outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO); - ctrl = inb(iobase + IRCC_CONTROL) & 0xf0; - outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI); - - /* Set max Tx frame size */ - outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI); - outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO); - - /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/ - - /* Enable burst mode chip Tx DMA */ - register_bank(iobase, 1); - outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | - IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); - - /* Setup DMA controller (must be done after enabling chip DMA) */ - irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len, - DMA_TX_MODE); - - /* Enable interrupt */ - - register_bank(iobase, 0); - outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); - outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); - - /* Enable transmit */ - outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B); -} - -/* - * Function smsc_ircc_dma_xmit_complete (self) - * - * The transfer of a frame in finished. This function will only be called - * by the interrupt handler - * - */ -static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self) -{ - int iobase = self->io.fir_base; - - pr_debug("%s\n", __func__); -#if 0 - /* Disable Tx */ - register_bank(iobase, 0); - outb(0x00, iobase + IRCC_LCR_B); -#endif - register_bank(iobase, 1); - outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase + IRCC_SCE_CFGB); - - /* Check for underrun! */ - register_bank(iobase, 0); - if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) { - self->netdev->stats.tx_errors++; - self->netdev->stats.tx_fifo_errors++; - - /* Reset error condition */ - register_bank(iobase, 0); - outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER); - outb(0x00, iobase + IRCC_MASTER); - } else { - self->netdev->stats.tx_packets++; - self->netdev->stats.tx_bytes += self->tx_buff.len; - } - - /* Check if it's time to change the speed */ - if (self->new_speed) { - smsc_ircc_change_speed(self, self->new_speed); - self->new_speed = 0; - } - - netif_wake_queue(self->netdev); -} - -/* - * Function smsc_ircc_dma_receive(self) - * - * Get ready for receiving a frame. The device will initiate a DMA - * if it starts to receive a frame. - * - */ -static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self) -{ - int iobase = self->io.fir_base; -#if 0 - /* Turn off chip DMA */ - register_bank(iobase, 1); - outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase + IRCC_SCE_CFGB); -#endif - - /* Disable Tx */ - register_bank(iobase, 0); - outb(0x00, iobase + IRCC_LCR_B); - - /* Turn off chip DMA */ - register_bank(iobase, 1); - outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase + IRCC_SCE_CFGB); - - self->io.direction = IO_RECV; - self->rx_buff.data = self->rx_buff.head; - - /* Set max Rx frame size */ - register_bank(iobase, 4); - outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI); - outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO); - - /* Setup DMA controller */ - irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, - DMA_RX_MODE); - - /* Enable burst mode chip Rx DMA */ - register_bank(iobase, 1); - outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | - IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); - - /* Enable interrupt */ - register_bank(iobase, 0); - outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); - outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); - - /* Enable receiver */ - register_bank(iobase, 0); - outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE, - iobase + IRCC_LCR_B); - - return 0; -} - -/* - * Function smsc_ircc_dma_receive_complete(self) - * - * Finished with receiving frames - * - */ -static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) -{ - struct sk_buff *skb; - int len, msgcnt, lsr; - int iobase = self->io.fir_base; - - register_bank(iobase, 0); - - pr_debug("%s\n", __func__); -#if 0 - /* Disable Rx */ - register_bank(iobase, 0); - outb(0x00, iobase + IRCC_LCR_B); -#endif - register_bank(iobase, 0); - outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR); - lsr= inb(iobase + IRCC_LSR); - msgcnt = inb(iobase + IRCC_LCR_B) & 0x08; - - pr_debug("%s: dma count = %d\n", __func__, - get_dma_residue(self->io.dma)); - - len = self->rx_buff.truesize - get_dma_residue(self->io.dma); - - /* Look for errors */ - if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) { - self->netdev->stats.rx_errors++; - if (lsr & IRCC_LSR_FRAME_ERROR) - self->netdev->stats.rx_frame_errors++; - if (lsr & IRCC_LSR_CRC_ERROR) - self->netdev->stats.rx_crc_errors++; - if (lsr & IRCC_LSR_SIZE_ERROR) - self->netdev->stats.rx_length_errors++; - if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) - self->netdev->stats.rx_length_errors++; - return; - } - - /* Remove CRC */ - len -= self->io.speed < 4000000 ? 2 : 4; - - if (len < 2 || len > 2050) { - net_warn_ratelimited("%s(), bogus len=%d\n", __func__, len); - return; - } - pr_debug("%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len); - - skb = dev_alloc_skb(len + 1); - if (!skb) - return; - - /* Make sure IP header gets aligned */ - skb_reserve(skb, 1); - - skb_put_data(skb, self->rx_buff.data, len); - self->netdev->stats.rx_packets++; - self->netdev->stats.rx_bytes += len; - - skb->dev = self->netdev; - skb_reset_mac_header(skb); - skb->protocol = htons(ETH_P_IRDA); - netif_rx(skb); -} - -/* - * Function smsc_ircc_sir_receive (self) - * - * Receive one frame from the infrared port - * - */ -static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) -{ - int boguscount = 0; - int iobase; - - IRDA_ASSERT(self != NULL, return;); - - iobase = self->io.sir_base; - - /* - * Receive all characters in Rx FIFO, unwrap and unstuff them. - * async_unwrap_char will deliver all found frames - */ - do { - async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff, - inb(iobase + UART_RX)); - - /* Make sure we don't stay here to long */ - if (boguscount++ > 32) { - pr_debug("%s(), breaking!\n", __func__); - break; - } - } while (inb(iobase + UART_LSR) & UART_LSR_DR); -} - - -/* - * Function smsc_ircc_interrupt (irq, dev_id, regs) - * - * An interrupt from the chip has arrived. Time to do some work - * - */ -static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id) -{ - struct net_device *dev = dev_id; - struct smsc_ircc_cb *self = netdev_priv(dev); - int iobase, iir, lcra, lsr; - irqreturn_t ret = IRQ_NONE; - - /* Serialise the interrupt handler in various CPUs, stop Tx path */ - spin_lock(&self->lock); - - /* Check if we should use the SIR interrupt handler */ - if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) { - ret = smsc_ircc_interrupt_sir(dev); - goto irq_ret_unlock; - } - - iobase = self->io.fir_base; - - register_bank(iobase, 0); - iir = inb(iobase + IRCC_IIR); - if (iir == 0) - goto irq_ret_unlock; - ret = IRQ_HANDLED; - - /* Disable interrupts */ - outb(0, iobase + IRCC_IER); - lcra = inb(iobase + IRCC_LCR_A); - lsr = inb(iobase + IRCC_LSR); - - pr_debug("%s(), iir = 0x%02x\n", __func__, iir); - - if (iir & IRCC_IIR_EOM) { - if (self->io.direction == IO_RECV) - smsc_ircc_dma_receive_complete(self); - else - smsc_ircc_dma_xmit_complete(self); - - smsc_ircc_dma_receive(self); - } - - if (iir & IRCC_IIR_ACTIVE_FRAME) { - /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/ - } - - /* Enable interrupts again */ - - register_bank(iobase, 0); - outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); - - irq_ret_unlock: - spin_unlock(&self->lock); - - return ret; -} - -/* - * Function irport_interrupt_sir (irq, dev_id) - * - * Interrupt handler for SIR modes - */ -static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) -{ - struct smsc_ircc_cb *self = netdev_priv(dev); - int boguscount = 0; - int iobase; - int iir, lsr; - - /* Already locked coming here in smsc_ircc_interrupt() */ - /*spin_lock(&self->lock);*/ - - iobase = self->io.sir_base; - - iir = inb(iobase + UART_IIR) & UART_IIR_ID; - if (iir == 0) - return IRQ_NONE; - while (iir) { - /* Clear interrupt */ - lsr = inb(iobase + UART_LSR); - - pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n", - __func__, iir, lsr, iobase); - - switch (iir) { - case UART_IIR_RLSI: - pr_debug("%s(), RLSI\n", __func__); - break; - case UART_IIR_RDI: - /* Receive interrupt */ - smsc_ircc_sir_receive(self); - break; - case UART_IIR_THRI: - if (lsr & UART_LSR_THRE) - /* Transmitter ready for data */ - smsc_ircc_sir_write_wakeup(self); - break; - default: - pr_debug("%s(), unhandled IIR=%#x\n", - __func__, iir); - break; - } - - /* Make sure we don't stay here to long */ - if (boguscount++ > 100) - break; - - iir = inb(iobase + UART_IIR) & UART_IIR_ID; - } - /*spin_unlock(&self->lock);*/ - return IRQ_HANDLED; -} - - -#if 0 /* unused */ -/* - * Function ircc_is_receiving (self) - * - * Return TRUE is we are currently receiving a frame - * - */ -static int ircc_is_receiving(struct smsc_ircc_cb *self) -{ - int status = FALSE; - /* int iobase; */ - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(self != NULL, return FALSE;); - - pr_debug("%s: dma count = %d\n", __func__, - get_dma_residue(self->io.dma)); - - status = (self->rx_buff.state != OUTSIDE_FRAME); - - return status; -} -#endif /* unused */ - -static int smsc_ircc_request_irq(struct smsc_ircc_cb *self) -{ - int error; - - error = request_irq(self->io.irq, smsc_ircc_interrupt, 0, - self->netdev->name, self->netdev); - if (error) - pr_debug("%s(), unable to allocate irq=%d, err=%d\n", - __func__, self->io.irq, error); - - return error; -} - -static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self) -{ - unsigned long flags; - - spin_lock_irqsave(&self->lock, flags); - - self->io.speed = 0; - smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); - - spin_unlock_irqrestore(&self->lock, flags); -} - -static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self) -{ - int iobase = self->io.fir_base; - unsigned long flags; - - spin_lock_irqsave(&self->lock, flags); - - register_bank(iobase, 0); - outb(0, iobase + IRCC_IER); - outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); - outb(0x00, iobase + IRCC_MASTER); - - spin_unlock_irqrestore(&self->lock, flags); -} - - -/* - * Function smsc_ircc_net_open (dev) - * - * Start the device - * - */ -static int smsc_ircc_net_open(struct net_device *dev) -{ - struct smsc_ircc_cb *self; - char hwname[16]; - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(dev != NULL, return -1;); - self = netdev_priv(dev); - IRDA_ASSERT(self != NULL, return 0;); - - if (self->io.suspended) { - pr_debug("%s(), device is suspended\n", __func__); - return -EAGAIN; - } - - if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, - (void *) dev)) { - pr_debug("%s(), unable to allocate irq=%d\n", - __func__, self->io.irq); - return -EAGAIN; - } - - smsc_ircc_start_interrupts(self); - - /* Give self a hardware name */ - /* It would be cool to offer the chip revision here - Jean II */ - sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base); - - /* - * Open new IrLAP layer instance, now that everything should be - * initialized properly - */ - self->irlap = irlap_open(dev, &self->qos, hwname); - - /* - * Always allocate the DMA channel after the IRQ, - * and clean up on failure. - */ - if (request_dma(self->io.dma, dev->name)) { - smsc_ircc_net_close(dev); - - net_warn_ratelimited("%s(), unable to allocate DMA=%d\n", - __func__, self->io.dma); - return -EAGAIN; - } - - netif_start_queue(dev); - - return 0; -} - -/* - * Function smsc_ircc_net_close (dev) - * - * Stop the device - * - */ -static int smsc_ircc_net_close(struct net_device *dev) -{ - struct smsc_ircc_cb *self; - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(dev != NULL, return -1;); - self = netdev_priv(dev); - IRDA_ASSERT(self != NULL, return 0;); - - /* Stop device */ - netif_stop_queue(dev); - - /* Stop and remove instance of IrLAP */ - if (self->irlap) - irlap_close(self->irlap); - self->irlap = NULL; - - smsc_ircc_stop_interrupts(self); - - /* if we are called from smsc_ircc_resume we don't have IRQ reserved */ - if (!self->io.suspended) - free_irq(self->io.irq, dev); - - disable_dma(self->io.dma); - free_dma(self->io.dma); - - return 0; -} - -static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state) -{ - struct smsc_ircc_cb *self = platform_get_drvdata(dev); - - if (!self->io.suspended) { - pr_debug("%s, Suspending\n", driver_name); - - rtnl_lock(); - if (netif_running(self->netdev)) { - netif_device_detach(self->netdev); - smsc_ircc_stop_interrupts(self); - free_irq(self->io.irq, self->netdev); - disable_dma(self->io.dma); - } - self->io.suspended = 1; - rtnl_unlock(); - } - - return 0; -} - -static int smsc_ircc_resume(struct platform_device *dev) -{ - struct smsc_ircc_cb *self = platform_get_drvdata(dev); - - if (self->io.suspended) { - pr_debug("%s, Waking up\n", driver_name); - - rtnl_lock(); - smsc_ircc_init_chip(self); - if (netif_running(self->netdev)) { - if (smsc_ircc_request_irq(self)) { - /* - * Don't fail resume process, just kill this - * network interface - */ - unregister_netdevice(self->netdev); - } else { - enable_dma(self->io.dma); - smsc_ircc_start_interrupts(self); - netif_device_attach(self->netdev); - } - } - self->io.suspended = 0; - rtnl_unlock(); - } - return 0; -} - -/* - * Function smsc_ircc_close (self) - * - * Close driver instance - * - */ -static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) -{ - pr_debug("%s\n", __func__); - - IRDA_ASSERT(self != NULL, return -1;); - - platform_device_unregister(self->pldev); - - /* Remove netdevice */ - unregister_netdev(self->netdev); - - smsc_ircc_stop_interrupts(self); - - /* Release the PORTS that this driver is using */ - pr_debug("%s(), releasing 0x%03x\n", __func__, - self->io.fir_base); - - release_region(self->io.fir_base, self->io.fir_ext); - - pr_debug("%s(), releasing 0x%03x\n", __func__, - self->io.sir_base); - - release_region(self->io.sir_base, self->io.sir_ext); - - if (self->tx_buff.head) - dma_free_coherent(NULL, self->tx_buff.truesize, - self->tx_buff.head, self->tx_buff_dma); - - if (self->rx_buff.head) - dma_free_coherent(NULL, self->rx_buff.truesize, - self->rx_buff.head, self->rx_buff_dma); - - free_netdev(self->netdev); - - return 0; -} - -static void __exit smsc_ircc_cleanup(void) -{ - int i; - - pr_debug("%s\n", __func__); - - for (i = 0; i < 2; i++) { - if (dev_self[i]) - smsc_ircc_close(dev_self[i]); - } - - if (pnp_driver_registered) - pnp_unregister_driver(&smsc_ircc_pnp_driver); - - platform_driver_unregister(&smsc_ircc_driver); -} - -/* - * Start SIR operations - * - * This function *must* be called with spinlock held, because it may - * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II - */ -static void smsc_ircc_sir_start(struct smsc_ircc_cb *self) -{ - struct net_device *dev; - int fir_base, sir_base; - - pr_debug("%s\n", __func__); - - IRDA_ASSERT(self != NULL, return;); - dev = self->netdev; - IRDA_ASSERT(dev != NULL, return;); - - fir_base = self->io.fir_base; - sir_base = self->io.sir_base; - - /* Reset everything */ - outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER); - - #if SMSC_IRCC2_C_SIR_STOP - /*smsc_ircc_sir_stop(self);*/ - #endif - - register_bank(fir_base, 1); - outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA); - - /* Initialize UART */ - outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */ - outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR); - - /* Turn on interrups */ - outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); - - pr_debug("%s() - exit\n", __func__); - - outb(0x00, fir_base + IRCC_MASTER); -} - -#if SMSC_IRCC2_C_SIR_STOP -void smsc_ircc_sir_stop(struct smsc_ircc_cb *self) -{ - int iobase; - - pr_debug("%s\n", __func__); - iobase = self->io.sir_base; - - /* Reset UART */ - outb(0, iobase + UART_MCR); - - /* Turn off interrupts */ - outb(0, iobase + UART_IER); -} -#endif - -/* - * Function smsc_sir_write_wakeup (self) - * - * Called by the SIR interrupt handler when there's room for more data. - * If we have more packets to send, we send them here. - * - */ -static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) -{ - int actual = 0; - int iobase; - int fcr; - - IRDA_ASSERT(self != NULL, return;); - - pr_debug("%s\n", __func__); - - iobase = self->io.sir_base; - - /* Finished with frame? */ - if (self->tx_buff.len > 0) { - /* Write data left in transmit buffer */ - actual = smsc_ircc_sir_write(iobase, self->io.fifo_size, - self->tx_buff.data, self->tx_buff.len); - self->tx_buff.data += actual; - self->tx_buff.len -= actual; - } else { - - /*if (self->tx_buff.len ==0) {*/ - - /* - * Now serial buffer is almost free & we can start - * transmission of another packet. But first we must check - * if we need to change the speed of the hardware - */ - if (self->new_speed) { - pr_debug("%s(), Changing speed to %d.\n", - __func__, self->new_speed); - smsc_ircc_sir_wait_hw_transmitter_finish(self); - smsc_ircc_change_speed(self, self->new_speed); - self->new_speed = 0; - } else { - /* Tell network layer that we want more frames */ - netif_wake_queue(self->netdev); - } - self->netdev->stats.tx_packets++; - - if (self->io.speed <= 115200) { - /* - * Reset Rx FIFO to make sure that all reflected transmit data - * is discarded. This is needed for half duplex operation - */ - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR; - fcr |= self->io.speed < 38400 ? - UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; - - outb(fcr, iobase + UART_FCR); - - /* Turn on receive interrupts */ - outb(UART_IER_RDI, iobase + UART_IER); - } - } -} - -/* - * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len) - * - * Fill Tx FIFO with transmit data - * - */ -static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) -{ - int actual = 0; - - /* Tx FIFO should be empty! */ - if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) { - net_warn_ratelimited("%s(), failed, fifo not empty!\n", - __func__); - return 0; - } - - /* Fill FIFO with current frame */ - while (fifo_size-- > 0 && actual < len) { - /* Transmit next byte */ - outb(buf[actual], iobase + UART_TX); - actual++; - } - return actual; -} - -/* - * Function smsc_ircc_is_receiving (self) - * - * Returns true is we are currently receiving data - * - */ -static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self) -{ - return self->rx_buff.state != OUTSIDE_FRAME; -} - - -/* - * Function smsc_ircc_probe_transceiver(self) - * - * Tries to find the used Transceiver - * - */ -static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self) -{ - unsigned int i; - - IRDA_ASSERT(self != NULL, return;); - - for (i = 0; smsc_transceivers[i].name != NULL; i++) - if (smsc_transceivers[i].probe(self->io.fir_base)) { - net_info_ratelimited(" %s transceiver found\n", - smsc_transceivers[i].name); - self->transceiver= i + 1; - return; - } - - net_info_ratelimited("No transceiver found. Defaulting to %s\n", - smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name); - - self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER; -} - - -/* - * Function smsc_ircc_set_transceiver_for_speed(self, speed) - * - * Set the transceiver according to the speed - * - */ -static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed) -{ - unsigned int trx; - - trx = self->transceiver; - if (trx > 0) - smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed); -} - -/* - * Function smsc_ircc_wait_hw_transmitter_finish () - * - * Wait for the real end of HW transmission - * - * The UART is a strict FIFO, and we get called only when we have finished - * pushing data to the FIFO, so the maximum amount of time we must wait - * is only for the FIFO to drain out. - * - * We use a simple calibrated loop. We may need to adjust the loop - * delay (udelay) to balance I/O traffic and latency. And we also need to - * adjust the maximum timeout. - * It would probably be better to wait for the proper interrupt, - * but it doesn't seem to be available. - * - * We can't use jiffies or kernel timers because : - * 1) We are called from the interrupt handler, which disable softirqs, - * so jiffies won't be increased - * 2) Jiffies granularity is usually very coarse (10ms), and we don't - * want to wait that long to detect stuck hardware. - * Jean II - */ - -static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) -{ - int iobase = self->io.sir_base; - int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US; - - /* Calibrated busy loop */ - while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT)) - udelay(1); - - if (count < 0) - pr_debug("%s(): stuck transmitter\n", __func__); -} - - -/* PROBING - * - * REVISIT we can be told about the device by PNP, and should use that info - * instead of probing hardware and creating a platform_device ... - */ - -static int __init smsc_ircc_look_for_chips(void) -{ - struct smsc_chip_address *address; - char *type; - unsigned int cfg_base, found; - - found = 0; - address = possible_addresses; - - while (address->cfg_base) { - cfg_base = address->cfg_base; - - /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/ - - if (address->type & SMSCSIO_TYPE_FDC) { - type = "FDC"; - if (address->type & SMSCSIO_TYPE_FLAT) - if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type)) - found++; - - if (address->type & SMSCSIO_TYPE_PAGED) - if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type)) - found++; - } - if (address->type & SMSCSIO_TYPE_LPC) { - type = "LPC"; - if (address->type & SMSCSIO_TYPE_FLAT) - if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type)) - found++; - - if (address->type & SMSCSIO_TYPE_PAGED) - if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type)) - found++; - } - address++; - } - return found; -} - -/* - * Function smsc_superio_flat (chip, base, type) - * - * Try to get configuration of a smc SuperIO chip with flat register model - * - */ -static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type) -{ - unsigned short firbase, sirbase; - u8 mode, dma, irq; - int ret = -ENODEV; - - pr_debug("%s\n", __func__); - - if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL) - return ret; - - outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase); - mode = inb(cfgbase + 1); - - /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/ - - if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) - net_warn_ratelimited("%s(): IrDA not enabled\n", __func__); - - outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase); - sirbase = inb(cfgbase + 1) << 2; - - /* FIR iobase */ - outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase); - firbase = inb(cfgbase + 1) << 3; - - /* DMA */ - outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase); - dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK; - - /* IRQ */ - outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase); - irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; - - net_info_ratelimited("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", - __func__, firbase, sirbase, dma, irq, mode); - - if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0) - ret = 0; - - /* Exit configuration */ - outb(SMSCSIO_CFGEXITKEY, cfgbase); - - return ret; -} - -/* - * Function smsc_superio_paged (chip, base, type) - * - * Try to get configuration of a smc SuperIO chip with paged register model - * - */ -static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type) -{ - unsigned short fir_io, sir_io; - int ret = -ENODEV; - - pr_debug("%s\n", __func__); - - if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL) - return ret; - - /* Select logical device (UART2) */ - outb(0x07, cfg_base); - outb(0x05, cfg_base + 1); - - /* SIR iobase */ - outb(0x60, cfg_base); - sir_io = inb(cfg_base + 1) << 8; - outb(0x61, cfg_base); - sir_io |= inb(cfg_base + 1); - - /* Read FIR base */ - outb(0x62, cfg_base); - fir_io = inb(cfg_base + 1) << 8; - outb(0x63, cfg_base); - fir_io |= inb(cfg_base + 1); - outb(0x2b, cfg_base); /* ??? */ - - if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0) - ret = 0; - - /* Exit configuration */ - outb(SMSCSIO_CFGEXITKEY, cfg_base); - - return ret; -} - - -static int __init smsc_access(unsigned short cfg_base, unsigned char reg) -{ - pr_debug("%s\n", __func__); - - outb(reg, cfg_base); - return inb(cfg_base) != reg ? -1 : 0; -} - -static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) -{ - u8 devid, xdevid, rev; - - pr_debug("%s\n", __func__); - - /* Leave configuration */ - - outb(SMSCSIO_CFGEXITKEY, cfg_base); - - if (inb(cfg_base) == SMSCSIO_CFGEXITKEY) /* not a smc superio chip */ - return NULL; - - outb(reg, cfg_base); - - xdevid = inb(cfg_base + 1); - - /* Enter configuration */ - - outb(SMSCSIO_CFGACCESSKEY, cfg_base); - - #if 0 - if (smsc_access(cfg_base,0x55)) /* send second key and check */ - return NULL; - #endif - - /* probe device ID */ - - if (smsc_access(cfg_base, reg)) - return NULL; - - devid = inb(cfg_base + 1); - - if (devid == 0 || devid == 0xff) /* typical values for unused port */ - return NULL; - - /* probe revision ID */ - - if (smsc_access(cfg_base, reg + 1)) - return NULL; - - rev = inb(cfg_base + 1); - - if (rev >= 128) /* i think this will make no sense */ - return NULL; - - if (devid == xdevid) /* protection against false positives */ - return NULL; - - /* Check for expected device ID; are there others? */ - - while (chip->devid != devid) { - - chip++; - - if (chip->name == NULL) - return NULL; - } - - net_info_ratelimited("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n", - devid, rev, cfg_base, type, chip->name); - - if (chip->rev > rev) { - net_info_ratelimited("Revision higher than expected\n"); - return NULL; - } - - if (chip->flags & NoIRDA) - net_info_ratelimited("chipset does not support IRDA\n"); - - return chip; -} - -static int __init smsc_superio_fdc(unsigned short cfg_base) -{ - int ret = -1; - - if (!request_region(cfg_base, 2, driver_name)) { - net_warn_ratelimited("%s: can't get cfg_base of 0x%03x\n", - __func__, cfg_base); - } else { - if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") || - !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC")) - ret = 0; - - release_region(cfg_base, 2); - } - - return ret; -} - -static int __init smsc_superio_lpc(unsigned short cfg_base) -{ - int ret = -1; - - if (!request_region(cfg_base, 2, driver_name)) { - net_warn_ratelimited("%s: can't get cfg_base of 0x%03x\n", - __func__, cfg_base); - } else { - if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") || - !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC")) - ret = 0; - - release_region(cfg_base, 2); - } - return ret; -} - -/* - * Look for some specific subsystem setups that need - * pre-configuration not properly done by the BIOS (especially laptops) - * This code is based in part on smcinit.c, tosh1800-smcinit.c - * and tosh2450-smcinit.c. The table lists the device entries - * for ISA bridges with an LPC (Low Pin Count) controller which - * handles the communication with the SMSC device. After the LPC - * controller is initialized through PCI, the SMSC device is initialized - * through a dedicated port in the ISA port-mapped I/O area, this latter - * area is used to configure the SMSC device with default - * SIR and FIR I/O ports, DMA and IRQ. Different vendors have - * used different sets of parameters and different control port - * addresses making a subsystem device table necessary. - */ -#ifdef CONFIG_PCI -static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { - /* - * Subsystems needing entries: - * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family - * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family - * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family - */ - { - /* Guessed entry */ - .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ - .device = 0x24cc, - .subvendor = 0x103c, - .subdevice = 0x08bc, - .sir_io = 0x02f8, - .fir_io = 0x0130, - .fir_irq = 0x05, - .fir_dma = 0x03, - .cfg_base = 0x004e, - .preconfigure = preconfigure_through_82801, - .name = "HP nx5000 family", - }, - { - .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ - .device = 0x24cc, - .subvendor = 0x103c, - .subdevice = 0x088c, - /* Quite certain these are the same for nc8000 as for nc6000 */ - .sir_io = 0x02f8, - .fir_io = 0x0130, - .fir_irq = 0x05, - .fir_dma = 0x03, - .cfg_base = 0x004e, - .preconfigure = preconfigure_through_82801, - .name = "HP nc8000 family", - }, - { - .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ - .device = 0x24cc, - .subvendor = 0x103c, - .subdevice = 0x0890, - .sir_io = 0x02f8, - .fir_io = 0x0130, - .fir_irq = 0x05, - .fir_dma = 0x03, - .cfg_base = 0x004e, - .preconfigure = preconfigure_through_82801, - .name = "HP nc6000 family", - }, - { - .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ - .device = 0x24cc, - .subvendor = 0x0e11, - .subdevice = 0x0860, - /* I assume these are the same for x1000 as for the others */ - .sir_io = 0x02e8, - .fir_io = 0x02f8, - .fir_irq = 0x07, - .fir_dma = 0x03, - .cfg_base = 0x002e, - .preconfigure = preconfigure_through_82801, - .name = "Compaq x1000 family", - }, - { - /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */ - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24c0, - .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any" */ - .sir_io = 0x03f8, - .fir_io = 0x0130, - .fir_irq = 0x07, - .fir_dma = 0x01, - .cfg_base = 0x002e, - .preconfigure = preconfigure_through_82801, - .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge", - }, - { - .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */ - .device = 0x248c, - .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any" */ - .sir_io = 0x03f8, - .fir_io = 0x0130, - .fir_irq = 0x03, - .fir_dma = 0x03, - .cfg_base = 0x002e, - .preconfigure = preconfigure_through_82801, - .name = "Toshiba laptop with Intel 82801CAM ISA bridge", - }, - { - /* 82801DBM (ICH4-M) LPC Interface Bridge */ - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24cc, - .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any" */ - .sir_io = 0x03f8, - .fir_io = 0x0130, - .fir_irq = 0x03, - .fir_dma = 0x03, - .cfg_base = 0x002e, - .preconfigure = preconfigure_through_82801, - .name = "Toshiba laptop with Intel 8281DBM LPC bridge", - }, - { - /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */ - .vendor = PCI_VENDOR_ID_AL, - .device = 0x1533, - .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any" */ - .sir_io = 0x02e8, - .fir_io = 0x02f8, - .fir_irq = 0x07, - .fir_dma = 0x03, - .cfg_base = 0x002e, - .preconfigure = preconfigure_through_ali, - .name = "Toshiba laptop with ALi ISA bridge", - }, - { } // Terminator -}; - - -/* - * This sets up the basic SMSC parameters - * (FIR port, SIR port, FIR DMA, FIR IRQ) - * through the chip configuration port. - */ -static int __init preconfigure_smsc_chip(struct - smsc_ircc_subsystem_configuration - *conf) -{ - unsigned short iobase = conf->cfg_base; - unsigned char tmpbyte; - - outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state - outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID - tmpbyte = inb(iobase +1); // Read device ID - pr_debug("Detected Chip id: 0x%02x, setting up registers...\n", - tmpbyte); - - /* Disable UART1 and set up SIR I/O port */ - outb(0x24, iobase); // select CR24 - UART1 base addr - outb(0x00, iobase + 1); // disable UART1 - outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase); // select CR25 - UART2 base addr - outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8 - tmpbyte = inb(iobase + 1); - if (tmpbyte != (conf->sir_io >> 2) ) { - net_warn_ratelimited("ERROR: could not configure SIR ioport\n"); - net_warn_ratelimited("Try to supply ircc_cfg argument\n"); - return -ENXIO; - } - - /* Set up FIR IRQ channel for UART2 */ - outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select - tmpbyte = inb(iobase + 1); - tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion - tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK); - outb(tmpbyte, iobase + 1); - tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; - if (tmpbyte != conf->fir_irq) { - net_warn_ratelimited("ERROR: could not configure FIR IRQ channel\n"); - return -ENXIO; - } - - /* Set up FIR I/O port */ - outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase); // CR2B - SCE (FIR) base addr - outb((conf->fir_io >> 3), iobase + 1); - tmpbyte = inb(iobase + 1); - if (tmpbyte != (conf->fir_io >> 3) ) { - net_warn_ratelimited("ERROR: could not configure FIR I/O port\n"); - return -ENXIO; - } - - /* Set up FIR DMA channel */ - outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase); // CR2C - SCE (FIR) DMA select - outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA - tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK; - if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) { - net_warn_ratelimited("ERROR: could not configure FIR DMA channel\n"); - return -ENXIO; - } - - outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode - tmpbyte = inb(iobase + 1); - tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | - SMSCSIOFLAT_UART2MODE_VAL_IRDA; - outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed - - outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel - tmpbyte = inb(iobase + 1); - outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down - - /* This one was not part of tosh1800 */ - outb(0x0a, iobase); // CR0a - ecp fifo / ir mux - tmpbyte = inb(iobase + 1); - outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port - - outb(LPC47N227_UART12POWER_REG, iobase); // CR02 - UART 1,2 power - tmpbyte = inb(iobase + 1); - outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down - - outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase); // CR00 - FDC Power/valid config cycle - tmpbyte = inb(iobase + 1); - outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done - - outb(LPC47N227_CFGEXITKEY, iobase); // Exit configuration - - return 0; -} - -/* 82801CAM generic registers */ -#define VID 0x00 -#define DID 0x02 -#define PIRQ_A_D_ROUT 0x60 -#define SIRQ_CNTL 0x64 -#define PIRQ_E_H_ROUT 0x68 -#define PCI_DMA_C 0x90 -/* LPC-specific registers */ -#define COM_DEC 0xe0 -#define GEN1_DEC 0xe4 -#define LPC_EN 0xe6 -#define GEN2_DEC 0xec -/* - * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge - * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. - * They all work the same way! - */ -static int __init preconfigure_through_82801(struct pci_dev *dev, - struct - smsc_ircc_subsystem_configuration - *conf) -{ - unsigned short tmpword; - unsigned char tmpbyte; - - net_info_ratelimited("Setting up Intel 82801 controller and SMSC device\n"); - /* - * Select the range for the COMA COM port (SIR) - * Register COM_DEC: - * Bit 7: reserved - * Bit 6-4, COMB decode range - * Bit 3: reserved - * Bit 2-0, COMA decode range - * - * Decode ranges: - * 000 = 0x3f8-0x3ff (COM1) - * 001 = 0x2f8-0x2ff (COM2) - * 010 = 0x220-0x227 - * 011 = 0x228-0x22f - * 100 = 0x238-0x23f - * 101 = 0x2e8-0x2ef (COM4) - * 110 = 0x338-0x33f - * 111 = 0x3e8-0x3ef (COM3) - */ - pci_read_config_byte(dev, COM_DEC, &tmpbyte); - tmpbyte &= 0xf8; /* mask COMA bits */ - switch(conf->sir_io) { - case 0x3f8: - tmpbyte |= 0x00; - break; - case 0x2f8: - tmpbyte |= 0x01; - break; - case 0x220: - tmpbyte |= 0x02; - break; - case 0x228: - tmpbyte |= 0x03; - break; - case 0x238: - tmpbyte |= 0x04; - break; - case 0x2e8: - tmpbyte |= 0x05; - break; - case 0x338: - tmpbyte |= 0x06; - break; - case 0x3e8: - tmpbyte |= 0x07; - break; - default: - tmpbyte |= 0x01; /* COM2 default */ - } - pr_debug("COM_DEC (write): 0x%02x\n", tmpbyte); - pci_write_config_byte(dev, COM_DEC, tmpbyte); - - /* Enable Low Pin Count interface */ - pci_read_config_word(dev, LPC_EN, &tmpword); - /* These seem to be set up at all times, - * just make sure it is properly set. - */ - switch(conf->cfg_base) { - case 0x04e: - tmpword |= 0x2000; - break; - case 0x02e: - tmpword |= 0x1000; - break; - case 0x062: - tmpword |= 0x0800; - break; - case 0x060: - tmpword |= 0x0400; - break; - default: - net_warn_ratelimited("Uncommon I/O base address: 0x%04x\n", - conf->cfg_base); - break; - } - tmpword &= 0xfffd; /* disable LPC COMB */ - tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */ - pr_debug("LPC_EN (write): 0x%04x\n", tmpword); - pci_write_config_word(dev, LPC_EN, tmpword); - - /* - * Configure LPC DMA channel - * PCI_DMA_C bits: - * Bit 15-14: DMA channel 7 select - * Bit 13-12: DMA channel 6 select - * Bit 11-10: DMA channel 5 select - * Bit 9-8: Reserved - * Bit 7-6: DMA channel 3 select - * Bit 5-4: DMA channel 2 select - * Bit 3-2: DMA channel 1 select - * Bit 1-0: DMA channel 0 select - * 00 = Reserved value - * 01 = PC/PCI DMA - * 10 = Reserved value - * 11 = LPC I/F DMA - */ - pci_read_config_word(dev, PCI_DMA_C, &tmpword); - switch(conf->fir_dma) { - case 0x07: - tmpword |= 0xc000; - break; - case 0x06: - tmpword |= 0x3000; - break; - case 0x05: - tmpword |= 0x0c00; - break; - case 0x03: - tmpword |= 0x00c0; - break; - case 0x02: - tmpword |= 0x0030; - break; - case 0x01: - tmpword |= 0x000c; - break; - case 0x00: - tmpword |= 0x0003; - break; - default: - break; /* do not change settings */ - } - pr_debug("PCI_DMA_C (write): 0x%04x\n", tmpword); - pci_write_config_word(dev, PCI_DMA_C, tmpword); - - /* - * GEN2_DEC bits: - * Bit 15-4: Generic I/O range - * Bit 3-1: reserved (read as 0) - * Bit 0: enable GEN2 range on LPC I/F - */ - tmpword = conf->fir_io & 0xfff8; - tmpword |= 0x0001; - pr_debug("GEN2_DEC (write): 0x%04x\n", tmpword); - pci_write_config_word(dev, GEN2_DEC, tmpword); - - /* Pre-configure chip */ - return preconfigure_smsc_chip(conf); -} - -/* - * Pre-configure a certain port on the ALi 1533 bridge. - * This is based on reverse-engineering since ALi does not - * provide any data sheet for the 1533 chip. - */ -static void __init preconfigure_ali_port(struct pci_dev *dev, - unsigned short port) -{ - unsigned char reg; - /* These bits obviously control the different ports */ - unsigned char mask; - unsigned char tmpbyte; - - switch(port) { - case 0x0130: - case 0x0178: - reg = 0xb0; - mask = 0x80; - break; - case 0x03f8: - reg = 0xb4; - mask = 0x80; - break; - case 0x02f8: - reg = 0xb4; - mask = 0x30; - break; - case 0x02e8: - reg = 0xb4; - mask = 0x08; - break; - default: - net_err_ratelimited("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", - port); - return; - } - - pci_read_config_byte(dev, reg, &tmpbyte); - /* Turn on the right bits */ - tmpbyte |= mask; - pci_write_config_byte(dev, reg, tmpbyte); - net_info_ratelimited("Activated ALi 1533 ISA bridge port 0x%04x\n", - port); -} - -static int __init preconfigure_through_ali(struct pci_dev *dev, - struct - smsc_ircc_subsystem_configuration - *conf) -{ - /* Configure the two ports on the ALi 1533 */ - preconfigure_ali_port(dev, conf->sir_io); - preconfigure_ali_port(dev, conf->fir_io); - - /* Pre-configure chip */ - return preconfigure_smsc_chip(conf); -} - -static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, - unsigned short ircc_fir, - unsigned short ircc_sir, - unsigned char ircc_dma, - unsigned char ircc_irq) -{ - struct pci_dev *dev = NULL; - unsigned short ss_vendor = 0x0000; - unsigned short ss_device = 0x0000; - int ret = 0; - - for_each_pci_dev(dev) { - struct smsc_ircc_subsystem_configuration *conf; - - /* - * Cache the subsystem vendor/device: - * some manufacturers fail to set this for all components, - * so we save it in case there is just 0x0000 0x0000 on the - * device we want to check. - */ - if (dev->subsystem_vendor != 0x0000U) { - ss_vendor = dev->subsystem_vendor; - ss_device = dev->subsystem_device; - } - conf = subsystem_configurations; - for( ; conf->subvendor; conf++) { - if(conf->vendor == dev->vendor && - conf->device == dev->device && - conf->subvendor == ss_vendor && - /* Sometimes these are cached values */ - (conf->subdevice == ss_device || - conf->subdevice == 0xffff)) { - struct smsc_ircc_subsystem_configuration - tmpconf; - - memcpy(&tmpconf, conf, - sizeof(struct smsc_ircc_subsystem_configuration)); - - /* - * Override the default values with anything - * passed in as parameter - */ - if (ircc_cfg != 0) - tmpconf.cfg_base = ircc_cfg; - if (ircc_fir != 0) - tmpconf.fir_io = ircc_fir; - if (ircc_sir != 0) - tmpconf.sir_io = ircc_sir; - if (ircc_dma != DMA_INVAL) - tmpconf.fir_dma = ircc_dma; - if (ircc_irq != IRQ_INVAL) - tmpconf.fir_irq = ircc_irq; - - net_info_ratelimited("Detected unconfigured %s SMSC IrDA chip, pre-configuring device\n", - conf->name); - if (conf->preconfigure) - ret = conf->preconfigure(dev, &tmpconf); - else - ret = -ENODEV; - } - } - } - - return ret; -} -#endif // CONFIG_PCI - -/************************************************ - * - * Transceivers specific functions - * - ************************************************/ - - -/* - * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed) - * - * Program transceiver through smsc-ircc ATC circuitry - * - */ - -static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed) -{ - unsigned long jiffies_now, jiffies_timeout; - u8 val; - - jiffies_now = jiffies; - jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES; - - /* ATC */ - register_bank(fir_base, 4); - outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, - fir_base + IRCC_ATC); - - while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) && - !time_after(jiffies, jiffies_timeout)) - /* empty */; - - if (val) - net_warn_ratelimited("%s(): ATC: 0x%02x\n", - __func__, inb(fir_base + IRCC_ATC)); -} - -/* - * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base) - * - * Probe transceiver smsc-ircc ATC circuitry - * - */ - -static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base) -{ - return 0; -} - -/* - * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed) - * - * Set transceiver - * - */ - -static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed) -{ - u8 fast_mode; - - switch (speed) { - default: - case 576000 : - fast_mode = 0; - break; - case 1152000 : - case 4000000 : - fast_mode = IRCC_LCR_A_FAST; - break; - } - register_bank(fir_base, 0); - outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); -} - -/* - * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base) - * - * Probe transceiver - * - */ - -static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base) -{ - return 0; -} - -/* - * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed) - * - * Set transceiver - * - */ - -static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed) -{ - u8 fast_mode; - - switch (speed) { - default: - case 576000 : - fast_mode = 0; - break; - case 1152000 : - case 4000000 : - fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA; - break; - - } - /* This causes an interrupt */ - register_bank(fir_base, 0); - outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); -} - -/* - * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base) - * - * Probe transceiver - * - */ - -static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base) -{ - return 0; -} - - -module_init(smsc_ircc_init); -module_exit(smsc_ircc_cleanup); |