diff options
Diffstat (limited to 'drivers/staging/irda/drivers/stir4200.c')
| -rw-r--r-- | drivers/staging/irda/drivers/stir4200.c | 1134 |
1 files changed, 0 insertions, 1134 deletions
diff --git a/drivers/staging/irda/drivers/stir4200.c b/drivers/staging/irda/drivers/stir4200.c deleted file mode 100644 index ee2cb70b688d..000000000000 --- a/drivers/staging/irda/drivers/stir4200.c +++ /dev/null @@ -1,1134 +0,0 @@ -/***************************************************************************** -* -* Filename: stir4200.c -* Version: 0.4 -* Description: Irda SigmaTel USB Dongle -* Status: Experimental -* Author: Stephen Hemminger <shemminger@osdl.org> -* -* Based on earlier driver by Paul Stewart <stewart@parc.com> -* -* Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at> -* Copyright (C) 2001, Dag Brattli <dag@brattli.net> -* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com> -* Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -* -*****************************************************************************/ - -/* - * This dongle does no framing, and requires polling to receive the - * data. The STIr4200 has bulk in and out endpoints just like - * usr-irda devices, but the data it sends and receives is raw; like - * irtty, it needs to call the wrap and unwrap functions to add and - * remove SOF/BOF and escape characters to/from the frame. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> - -#include <linux/kernel.h> -#include <linux/sched/signal.h> -#include <linux/ktime.h> -#include <linux/types.h> -#include <linux/time.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/usb.h> -#include <linux/crc32.h> -#include <linux/kthread.h> -#include <linux/freezer.h> -#include <net/irda/irda.h> -#include <net/irda/irda_device.h> -#include <net/irda/wrapper.h> -#include <net/irda/crc.h> -#include <asm/byteorder.h> -#include <asm/unaligned.h> - -MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); -MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200"); -MODULE_LICENSE("GPL"); - -static int qos_mtt_bits = 0x07; /* 1 ms or more */ -module_param(qos_mtt_bits, int, 0); -MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time"); - -static int rx_sensitivity = 1; /* FIR 0..4, SIR 0..6 */ -module_param(rx_sensitivity, int, 0); -MODULE_PARM_DESC(rx_sensitivity, "Set Receiver sensitivity (0-6, 0 is most sensitive)"); - -static int tx_power = 0; /* 0 = highest ... 3 = lowest */ -module_param(tx_power, int, 0); -MODULE_PARM_DESC(tx_power, "Set Transmitter power (0-3, 0 is highest power)"); - -#define STIR_IRDA_HEADER 4 -#define CTRL_TIMEOUT 100 /* milliseconds */ -#define TRANSMIT_TIMEOUT 200 /* milliseconds */ -#define STIR_FIFO_SIZE 4096 -#define FIFO_REGS_SIZE 3 - -enum FirChars { - FIR_CE = 0x7d, - FIR_XBOF = 0x7f, - FIR_EOF = 0x7e, -}; - -enum StirRequests { - REQ_WRITE_REG = 0x00, - REQ_READ_REG = 0x01, - REQ_READ_ROM = 0x02, - REQ_WRITE_SINGLE = 0x03, -}; - -/* Register offsets */ -enum StirRegs { - REG_RSVD=0, - REG_MODE, - REG_PDCLK, - REG_CTRL1, - REG_CTRL2, - REG_FIFOCTL, - REG_FIFOLSB, - REG_FIFOMSB, - REG_DPLL, - REG_IRDIG, - REG_TEST=15, -}; - -enum StirModeMask { - MODE_FIR = 0x80, - MODE_SIR = 0x20, - MODE_ASK = 0x10, - MODE_FASTRX = 0x08, - MODE_FFRSTEN = 0x04, - MODE_NRESET = 0x02, - MODE_2400 = 0x01, -}; - -enum StirPdclkMask { - PDCLK_4000000 = 0x02, - PDCLK_115200 = 0x09, - PDCLK_57600 = 0x13, - PDCLK_38400 = 0x1D, - PDCLK_19200 = 0x3B, - PDCLK_9600 = 0x77, - PDCLK_2400 = 0xDF, -}; - -enum StirCtrl1Mask { - CTRL1_SDMODE = 0x80, - CTRL1_RXSLOW = 0x40, - CTRL1_TXPWD = 0x10, - CTRL1_RXPWD = 0x08, - CTRL1_SRESET = 0x01, -}; - -enum StirCtrl2Mask { - CTRL2_SPWIDTH = 0x08, - CTRL2_REVID = 0x03, -}; - -enum StirFifoCtlMask { - FIFOCTL_DIR = 0x10, - FIFOCTL_CLR = 0x08, - FIFOCTL_EMPTY = 0x04, -}; - -enum StirDiagMask { - IRDIG_RXHIGH = 0x80, - IRDIG_RXLOW = 0x40, -}; - -enum StirTestMask { - TEST_PLLDOWN = 0x80, - TEST_LOOPIR = 0x40, - TEST_LOOPUSB = 0x20, - TEST_TSTENA = 0x10, - TEST_TSTOSC = 0x0F, -}; - -struct stir_cb { - struct usb_device *usbdev; /* init: probe_irda */ - struct net_device *netdev; /* network layer */ - struct irlap_cb *irlap; /* The link layer we are binded to */ - - struct qos_info qos; - unsigned speed; /* Current speed */ - - struct task_struct *thread; /* transmit thread */ - - struct sk_buff *tx_pending; - void *io_buf; /* transmit/receive buffer */ - __u8 *fifo_status; - - iobuff_t rx_buff; /* receive unwrap state machine */ - ktime_t rx_time; - int receiving; - struct urb *rx_urb; -}; - - -/* These are the currently known USB ids */ -static const struct usb_device_id dongles[] = { - /* SigmaTel, Inc, STIr4200 IrDA/USB Bridge */ - { USB_DEVICE(0x066f, 0x4200) }, - { } -}; - -MODULE_DEVICE_TABLE(usb, dongles); - -/* Send control message to set dongle register */ -static int write_reg(struct stir_cb *stir, __u16 reg, __u8 value) -{ - struct usb_device *dev = stir->usbdev; - - pr_debug("%s: write reg %d = 0x%x\n", - stir->netdev->name, reg, value); - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - REQ_WRITE_SINGLE, - USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE, - value, reg, NULL, 0, - CTRL_TIMEOUT); -} - -/* Send control message to read multiple registers */ -static inline int read_reg(struct stir_cb *stir, __u16 reg, - __u8 *data, __u16 count) -{ - struct usb_device *dev = stir->usbdev; - - return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - REQ_READ_REG, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, reg, data, count, - CTRL_TIMEOUT); -} - -static inline int isfir(u32 speed) -{ - return speed == 4000000; -} - -/* - * Prepare a FIR IrDA frame for transmission to the USB dongle. The - * FIR transmit frame is documented in the datasheet. It consists of - * a two byte 0x55 0xAA sequence, two little-endian length bytes, a - * sequence of exactly 16 XBOF bytes of 0x7E, two BOF bytes of 0x7E, - * then the data escaped as follows: - * - * 0x7D -> 0x7D 0x5D - * 0x7E -> 0x7D 0x5E - * 0x7F -> 0x7D 0x5F - * - * Then, 4 bytes of little endian (stuffed) FCS follow, then two - * trailing EOF bytes of 0x7E. - */ -static inline __u8 *stuff_fir(__u8 *p, __u8 c) -{ - switch(c) { - case 0x7d: - case 0x7e: - case 0x7f: - *p++ = 0x7d; - c ^= IRDA_TRANS; - /* fall through */ - default: - *p++ = c; - } - return p; -} - -/* Take raw data in skb and put it wrapped into buf */ -static unsigned wrap_fir_skb(const struct sk_buff *skb, __u8 *buf) -{ - __u8 *ptr = buf; - __u32 fcs = ~(crc32_le(~0, skb->data, skb->len)); - __u16 wraplen; - int i; - - /* Header */ - buf[0] = 0x55; - buf[1] = 0xAA; - - ptr = buf + STIR_IRDA_HEADER; - memset(ptr, 0x7f, 16); - ptr += 16; - - /* BOF */ - *ptr++ = 0x7e; - *ptr++ = 0x7e; - - /* Address / Control / Information */ - for (i = 0; i < skb->len; i++) - ptr = stuff_fir(ptr, skb->data[i]); - - /* FCS */ - ptr = stuff_fir(ptr, fcs & 0xff); - ptr = stuff_fir(ptr, (fcs >> 8) & 0xff); - ptr = stuff_fir(ptr, (fcs >> 16) & 0xff); - ptr = stuff_fir(ptr, (fcs >> 24) & 0xff); - - /* EOFs */ - *ptr++ = 0x7e; - *ptr++ = 0x7e; - - /* Total length, minus the header */ - wraplen = (ptr - buf) - STIR_IRDA_HEADER; - buf[2] = wraplen & 0xff; - buf[3] = (wraplen >> 8) & 0xff; - - return wraplen + STIR_IRDA_HEADER; -} - -static unsigned wrap_sir_skb(struct sk_buff *skb, __u8 *buf) -{ - __u16 wraplen; - - wraplen = async_wrap_skb(skb, buf + STIR_IRDA_HEADER, - STIR_FIFO_SIZE - STIR_IRDA_HEADER); - buf[0] = 0x55; - buf[1] = 0xAA; - buf[2] = wraplen & 0xff; - buf[3] = (wraplen >> 8) & 0xff; - - return wraplen + STIR_IRDA_HEADER; -} - -/* - * Frame is fully formed in the rx_buff so check crc - * and pass up to irlap - * setup for next receive - */ -static void fir_eof(struct stir_cb *stir) -{ - iobuff_t *rx_buff = &stir->rx_buff; - int len = rx_buff->len - 4; - struct sk_buff *skb, *nskb; - __u32 fcs; - - if (unlikely(len <= 0)) { - pr_debug("%s: short frame len %d\n", - stir->netdev->name, len); - - ++stir->netdev->stats.rx_errors; - ++stir->netdev->stats.rx_length_errors; - return; - } - - fcs = ~(crc32_le(~0, rx_buff->data, len)); - if (fcs != get_unaligned_le32(rx_buff->data + len)) { - pr_debug("crc error calc 0x%x len %d\n", fcs, len); - stir->netdev->stats.rx_errors++; - stir->netdev->stats.rx_crc_errors++; - return; - } - - /* if frame is short then just copy it */ - if (len < IRDA_RX_COPY_THRESHOLD) { - nskb = dev_alloc_skb(len + 1); - if (unlikely(!nskb)) { - ++stir->netdev->stats.rx_dropped; - return; - } - skb_reserve(nskb, 1); - skb = nskb; - skb_copy_to_linear_data(nskb, rx_buff->data, len); - } else { - nskb = dev_alloc_skb(rx_buff->truesize); - if (unlikely(!nskb)) { - ++stir->netdev->stats.rx_dropped; - return; - } - skb_reserve(nskb, 1); - skb = rx_buff->skb; - rx_buff->skb = nskb; - rx_buff->head = nskb->data; - } - - skb_put(skb, len); - - skb_reset_mac_header(skb); - skb->protocol = htons(ETH_P_IRDA); - skb->dev = stir->netdev; - - netif_rx(skb); - - stir->netdev->stats.rx_packets++; - stir->netdev->stats.rx_bytes += len; - - rx_buff->data = rx_buff->head; - rx_buff->len = 0; -} - -/* Unwrap FIR stuffed data and bump it to IrLAP */ -static void stir_fir_chars(struct stir_cb *stir, - const __u8 *bytes, int len) -{ - iobuff_t *rx_buff = &stir->rx_buff; - int i; - - for (i = 0; i < len; i++) { - __u8 byte = bytes[i]; - - switch(rx_buff->state) { - case OUTSIDE_FRAME: - /* ignore garbage till start of frame */ - if (unlikely(byte != FIR_EOF)) - continue; - /* Now receiving frame */ - rx_buff->state = BEGIN_FRAME; - - /* Time to initialize receive buffer */ - rx_buff->data = rx_buff->head; - rx_buff->len = 0; - continue; - - case LINK_ESCAPE: - if (byte == FIR_EOF) { - pr_debug("%s: got EOF after escape\n", - stir->netdev->name); - goto frame_error; - } - rx_buff->state = INSIDE_FRAME; - byte ^= IRDA_TRANS; - break; - - case BEGIN_FRAME: - /* ignore multiple BOF/EOF */ - if (byte == FIR_EOF) - continue; - rx_buff->state = INSIDE_FRAME; - rx_buff->in_frame = TRUE; - - /* fall through */ - case INSIDE_FRAME: - switch(byte) { - case FIR_CE: - rx_buff->state = LINK_ESCAPE; - continue; - case FIR_XBOF: - /* 0x7f is not used in this framing */ - pr_debug("%s: got XBOF without escape\n", - stir->netdev->name); - goto frame_error; - case FIR_EOF: - rx_buff->state = OUTSIDE_FRAME; - rx_buff->in_frame = FALSE; - fir_eof(stir); - continue; - } - break; - } - - /* add byte to rx buffer */ - if (unlikely(rx_buff->len >= rx_buff->truesize)) { - pr_debug("%s: fir frame exceeds %d\n", - stir->netdev->name, rx_buff->truesize); - ++stir->netdev->stats.rx_over_errors; - goto error_recovery; - } - - rx_buff->data[rx_buff->len++] = byte; - continue; - - frame_error: - ++stir->netdev->stats.rx_frame_errors; - - error_recovery: - ++stir->netdev->stats.rx_errors; - rx_buff->state = OUTSIDE_FRAME; - rx_buff->in_frame = FALSE; - } -} - -/* Unwrap SIR stuffed data and bump it up to IrLAP */ -static void stir_sir_chars(struct stir_cb *stir, - const __u8 *bytes, int len) -{ - int i; - - for (i = 0; i < len; i++) - async_unwrap_char(stir->netdev, &stir->netdev->stats, - &stir->rx_buff, bytes[i]); -} - -static inline void unwrap_chars(struct stir_cb *stir, - const __u8 *bytes, int length) -{ - if (isfir(stir->speed)) - stir_fir_chars(stir, bytes, length); - else - stir_sir_chars(stir, bytes, length); -} - -/* Mode parameters for each speed */ -static const struct { - unsigned speed; - __u8 pdclk; -} stir_modes[] = { - { 2400, PDCLK_2400 }, - { 9600, PDCLK_9600 }, - { 19200, PDCLK_19200 }, - { 38400, PDCLK_38400 }, - { 57600, PDCLK_57600 }, - { 115200, PDCLK_115200 }, - { 4000000, PDCLK_4000000 }, -}; - - -/* - * Setup chip for speed. - * Called at startup to initialize the chip - * and on speed changes. - * - * Note: Write multiple registers doesn't appear to work - */ -static int change_speed(struct stir_cb *stir, unsigned speed) -{ - int i, err; - __u8 mode; - - for (i = 0; i < ARRAY_SIZE(stir_modes); ++i) { - if (speed == stir_modes[i].speed) - goto found; - } - - dev_warn(&stir->netdev->dev, "invalid speed %d\n", speed); - return -EINVAL; - - found: - pr_debug("speed change from %d to %d\n", stir->speed, speed); - - /* Reset modulator */ - err = write_reg(stir, REG_CTRL1, CTRL1_SRESET); - if (err) - goto out; - - /* Undocumented magic to tweak the DPLL */ - err = write_reg(stir, REG_DPLL, 0x15); - if (err) - goto out; - - /* Set clock */ - err = write_reg(stir, REG_PDCLK, stir_modes[i].pdclk); - if (err) - goto out; - - mode = MODE_NRESET | MODE_FASTRX; - if (isfir(speed)) - mode |= MODE_FIR | MODE_FFRSTEN; - else - mode |= MODE_SIR; - - if (speed == 2400) - mode |= MODE_2400; - - err = write_reg(stir, REG_MODE, mode); - if (err) - goto out; - - /* This resets TEMIC style transceiver if any. */ - err = write_reg(stir, REG_CTRL1, - CTRL1_SDMODE | (tx_power & 3) << 1); - if (err) - goto out; - - err = write_reg(stir, REG_CTRL1, (tx_power & 3) << 1); - if (err) - goto out; - - /* Reset sensitivity */ - err = write_reg(stir, REG_CTRL2, (rx_sensitivity & 7) << 5); - out: - stir->speed = speed; - return err; -} - -/* - * Called from net/core when new frame is available. - */ -static netdev_tx_t stir_hard_xmit(struct sk_buff *skb, - struct net_device *netdev) -{ - struct stir_cb *stir = netdev_priv(netdev); - - netif_stop_queue(netdev); - - /* the IRDA wrapping routines don't deal with non linear skb */ - SKB_LINEAR_ASSERT(skb); - - skb = xchg(&stir->tx_pending, skb); - wake_up_process(stir->thread); - - /* this should never happen unless stop/wakeup problem */ - if (unlikely(skb)) { - WARN_ON(1); - dev_kfree_skb(skb); - } - - return NETDEV_TX_OK; -} - -/* - * Wait for the transmit FIFO to have space for next data - * - * If space < 0 then wait till FIFO completely drains. - * FYI: can take up to 13 seconds at 2400baud. - */ -static int fifo_txwait(struct stir_cb *stir, int space) -{ - int err; - unsigned long count, status; - unsigned long prev_count = 0x1fff; - - /* Read FIFO status and count */ - for (;; prev_count = count) { - err = read_reg(stir, REG_FIFOCTL, stir->fifo_status, - FIFO_REGS_SIZE); - if (unlikely(err != FIFO_REGS_SIZE)) { - dev_warn(&stir->netdev->dev, - "FIFO register read error: %d\n", err); - - return err; - } - - status = stir->fifo_status[0]; - count = (unsigned)(stir->fifo_status[2] & 0x1f) << 8 - | stir->fifo_status[1]; - - pr_debug("fifo status 0x%lx count %lu\n", status, count); - - /* is fifo receiving already, or empty */ - if (!(status & FIFOCTL_DIR) || - (status & FIFOCTL_EMPTY)) - return 0; - - if (signal_pending(current)) - return -EINTR; - - /* shutting down? */ - if (!netif_running(stir->netdev) || - !netif_device_present(stir->netdev)) - return -ESHUTDOWN; - - /* only waiting for some space */ - if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count) - return 0; - - /* queue confused */ - if (prev_count < count) - break; - - /* estimate transfer time for remaining chars */ - msleep((count * 8000) / stir->speed); - } - - err = write_reg(stir, REG_FIFOCTL, FIFOCTL_CLR); - if (err) - return err; - err = write_reg(stir, REG_FIFOCTL, 0); - if (err) - return err; - - return 0; -} - - -/* Wait for turnaround delay before starting transmit. */ -static void turnaround_delay(const struct stir_cb *stir, long us) -{ - long ticks; - - if (us <= 0) - return; - - us -= ktime_us_delta(ktime_get(), stir->rx_time); - - if (us < 10) - return; - - ticks = us / (1000000 / HZ); - if (ticks > 0) - schedule_timeout_interruptible(1 + ticks); - else - udelay(us); -} - -/* - * Start receiver by submitting a request to the receive pipe. - * If nothing is available it will return after rx_interval. - */ -static int receive_start(struct stir_cb *stir) -{ - /* reset state */ - stir->receiving = 1; - - stir->rx_buff.in_frame = FALSE; - stir->rx_buff.state = OUTSIDE_FRAME; - - stir->rx_urb->status = 0; - return usb_submit_urb(stir->rx_urb, GFP_KERNEL); -} - -/* Stop all pending receive Urb's */ -static void receive_stop(struct stir_cb *stir) -{ - stir->receiving = 0; - usb_kill_urb(stir->rx_urb); - - if (stir->rx_buff.in_frame) - stir->netdev->stats.collisions++; -} -/* - * Wrap data in socket buffer and send it. - */ -static void stir_send(struct stir_cb *stir, struct sk_buff *skb) -{ - unsigned wraplen; - int first_frame = 0; - - /* if receiving, need to turnaround */ - if (stir->receiving) { - receive_stop(stir); - turnaround_delay(stir, irda_get_mtt(skb)); - first_frame = 1; - } - - if (isfir(stir->speed)) - wraplen = wrap_fir_skb(skb, stir->io_buf); - else - wraplen = wrap_sir_skb(skb, stir->io_buf); - - /* check for space available in fifo */ - if (!first_frame) - fifo_txwait(stir, wraplen); - - stir->netdev->stats.tx_packets++; - stir->netdev->stats.tx_bytes += skb->len; - netif_trans_update(stir->netdev); - pr_debug("send %d (%d)\n", skb->len, wraplen); - - if (usb_bulk_msg(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1), - stir->io_buf, wraplen, - NULL, TRANSMIT_TIMEOUT)) - stir->netdev->stats.tx_errors++; -} - -/* - * Transmit state machine thread - */ -static int stir_transmit_thread(void *arg) -{ - struct stir_cb *stir = arg; - struct net_device *dev = stir->netdev; - struct sk_buff *skb; - - while (!kthread_should_stop()) { -#ifdef CONFIG_PM - /* if suspending, then power off and wait */ - if (unlikely(freezing(current))) { - if (stir->receiving) - receive_stop(stir); - else - fifo_txwait(stir, -1); - - write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD); - - try_to_freeze(); - - if (change_speed(stir, stir->speed)) - break; - } -#endif - - /* if something to send? */ - skb = xchg(&stir->tx_pending, NULL); - if (skb) { - unsigned new_speed = irda_get_next_speed(skb); - netif_wake_queue(dev); - - if (skb->len > 0) - stir_send(stir, skb); - dev_kfree_skb(skb); - - if ((new_speed != -1) && (stir->speed != new_speed)) { - if (fifo_txwait(stir, -1) || - change_speed(stir, new_speed)) - break; - } - continue; - } - - /* nothing to send? start receiving */ - if (!stir->receiving && - irda_device_txqueue_empty(dev)) { - /* Wait otherwise chip gets confused. */ - if (fifo_txwait(stir, -1)) - break; - - if (unlikely(receive_start(stir))) { - if (net_ratelimit()) - dev_info(&dev->dev, - "%s: receive usb submit failed\n", - stir->netdev->name); - stir->receiving = 0; - msleep(10); - continue; - } - } - - /* sleep if nothing to send */ - set_current_state(TASK_INTERRUPTIBLE); - schedule(); - - } - return 0; -} - - -/* - * USB bulk receive completion callback. - * Wakes up every ms (usb round trip) with wrapped - * data. - */ -static void stir_rcv_irq(struct urb *urb) -{ - struct stir_cb *stir = urb->context; - int err; - - /* in process of stopping, just drop data */ - if (!netif_running(stir->netdev)) - return; - - /* unlink, shutdown, unplug, other nasties */ - if (urb->status != 0) - return; - - if (urb->actual_length > 0) { - pr_debug("receive %d\n", urb->actual_length); - unwrap_chars(stir, urb->transfer_buffer, - urb->actual_length); - - stir->rx_time = ktime_get(); - } - - /* kernel thread is stopping receiver don't resubmit */ - if (!stir->receiving) - return; - - /* resubmit existing urb */ - err = usb_submit_urb(urb, GFP_ATOMIC); - - /* in case of error, the kernel thread will restart us */ - if (err) { - dev_warn(&stir->netdev->dev, "usb receive submit error: %d\n", - err); - stir->receiving = 0; - wake_up_process(stir->thread); - } -} - -/* - * Function stir_net_open (dev) - * - * Network device is taken up. Usually this is done by "ifconfig irda0 up" - */ -static int stir_net_open(struct net_device *netdev) -{ - struct stir_cb *stir = netdev_priv(netdev); - int err; - char hwname[16]; - - err = usb_clear_halt(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1)); - if (err) - goto err_out1; - err = usb_clear_halt(stir->usbdev, usb_rcvbulkpipe(stir->usbdev, 2)); - if (err) - goto err_out1; - - err = change_speed(stir, 9600); - if (err) - goto err_out1; - - err = -ENOMEM; - - /* Initialize for SIR/FIR to copy data directly into skb. */ - stir->receiving = 0; - stir->rx_buff.truesize = IRDA_SKB_MAX_MTU; - stir->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU); - if (!stir->rx_buff.skb) - goto err_out1; - - skb_reserve(stir->rx_buff.skb, 1); - stir->rx_buff.head = stir->rx_buff.skb->data; - stir->rx_time = ktime_get(); - - stir->rx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!stir->rx_urb) - goto err_out2; - - stir->io_buf = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL); - if (!stir->io_buf) - goto err_out3; - - usb_fill_bulk_urb(stir->rx_urb, stir->usbdev, - usb_rcvbulkpipe(stir->usbdev, 2), - stir->io_buf, STIR_FIFO_SIZE, - stir_rcv_irq, stir); - - stir->fifo_status = kmalloc(FIFO_REGS_SIZE, GFP_KERNEL); - if (!stir->fifo_status) - goto err_out4; - - /* - * Now that everything should be initialized properly, - * Open new IrLAP layer instance to take care of us... - * Note : will send immediately a speed change... - */ - sprintf(hwname, "usb#%d", stir->usbdev->devnum); - stir->irlap = irlap_open(netdev, &stir->qos, hwname); - if (!stir->irlap) { - dev_err(&stir->usbdev->dev, "irlap_open failed\n"); - goto err_out5; - } - - /** Start kernel thread for transmit. */ - stir->thread = kthread_run(stir_transmit_thread, stir, - "%s", stir->netdev->name); - if (IS_ERR(stir->thread)) { - err = PTR_ERR(stir->thread); - dev_err(&stir->usbdev->dev, "unable to start kernel thread\n"); - goto err_out6; - } - - netif_start_queue(netdev); - - return 0; - - err_out6: - irlap_close(stir->irlap); - err_out5: - kfree(stir->fifo_status); - err_out4: - kfree(stir->io_buf); - err_out3: - usb_free_urb(stir->rx_urb); - err_out2: - kfree_skb(stir->rx_buff.skb); - err_out1: - return err; -} - -/* - * Function stir_net_close (stir) - * - * Network device is taken down. Usually this is done by - * "ifconfig irda0 down" - */ -static int stir_net_close(struct net_device *netdev) -{ - struct stir_cb *stir = netdev_priv(netdev); - - /* Stop transmit processing */ - netif_stop_queue(netdev); - - /* Kill transmit thread */ - kthread_stop(stir->thread); - kfree(stir->fifo_status); - - /* Mop up receive urb's */ - usb_kill_urb(stir->rx_urb); - - kfree(stir->io_buf); - usb_free_urb(stir->rx_urb); - kfree_skb(stir->rx_buff.skb); - - /* Stop and remove instance of IrLAP */ - if (stir->irlap) - irlap_close(stir->irlap); - - stir->irlap = NULL; - - return 0; -} - -/* - * IOCTLs : Extra out-of-band network commands... - */ -static int stir_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) -{ - struct if_irda_req *irq = (struct if_irda_req *) rq; - struct stir_cb *stir = netdev_priv(netdev); - int ret = 0; - - switch (cmd) { - case SIOCSBANDWIDTH: /* Set bandwidth */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - /* Check if the device is still there */ - if (netif_device_present(stir->netdev)) - ret = change_speed(stir, irq->ifr_baudrate); - break; - - case SIOCSMEDIABUSY: /* Set media busy */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - /* Check if the IrDA stack is still there */ - if (netif_running(stir->netdev)) - irda_device_set_media_busy(stir->netdev, TRUE); - break; - - case SIOCGRECEIVING: - /* Only approximately true */ - irq->ifr_receiving = stir->receiving; - break; - - default: - ret = -EOPNOTSUPP; - } - - return ret; -} - -static const struct net_device_ops stir_netdev_ops = { - .ndo_open = stir_net_open, - .ndo_stop = stir_net_close, - .ndo_start_xmit = stir_hard_xmit, - .ndo_do_ioctl = stir_net_ioctl, -}; - -/* - * This routine is called by the USB subsystem for each new device - * in the system. We need to check if the device is ours, and in - * this case start handling it. - * Note : it might be worth protecting this function by a global - * spinlock... Or not, because maybe USB already deal with that... - */ -static int stir_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct stir_cb *stir = NULL; - struct net_device *net; - int ret = -ENOMEM; - - /* Allocate network device container. */ - net = alloc_irdadev(sizeof(*stir)); - if(!net) - goto err_out1; - - SET_NETDEV_DEV(net, &intf->dev); - stir = netdev_priv(net); - stir->netdev = net; - stir->usbdev = dev; - - ret = usb_reset_configuration(dev); - if (ret != 0) { - dev_err(&intf->dev, "usb reset configuration failed\n"); - goto err_out2; - } - - printk(KERN_INFO "SigmaTel STIr4200 IRDA/USB found at address %d, " - "Vendor: %x, Product: %x\n", - dev->devnum, le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - - /* Initialize QoS for this device */ - irda_init_max_qos_capabilies(&stir->qos); - - /* That's the Rx capability. */ - stir->qos.baud_rate.bits &= IR_2400 | IR_9600 | IR_19200 | - IR_38400 | IR_57600 | IR_115200 | - (IR_4000000 << 8); - stir->qos.min_turn_time.bits &= qos_mtt_bits; - irda_qos_bits_to_value(&stir->qos); - - /* Override the network functions we need to use */ - net->netdev_ops = &stir_netdev_ops; - - ret = register_netdev(net); - if (ret != 0) - goto err_out2; - - dev_info(&intf->dev, "IrDA: Registered SigmaTel device %s\n", - net->name); - - usb_set_intfdata(intf, stir); - - return 0; - -err_out2: - free_netdev(net); -err_out1: - return ret; -} - -/* - * The current device is removed, the USB layer tell us to shut it down... - */ -static void stir_disconnect(struct usb_interface *intf) -{ - struct stir_cb *stir = usb_get_intfdata(intf); - - if (!stir) - return; - - unregister_netdev(stir->netdev); - free_netdev(stir->netdev); - - usb_set_intfdata(intf, NULL); -} - -#ifdef CONFIG_PM -/* USB suspend, so power off the transmitter/receiver */ -static int stir_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct stir_cb *stir = usb_get_intfdata(intf); - - netif_device_detach(stir->netdev); - return 0; -} - -/* Coming out of suspend, so reset hardware */ -static int stir_resume(struct usb_interface *intf) -{ - struct stir_cb *stir = usb_get_intfdata(intf); - - netif_device_attach(stir->netdev); - - /* receiver restarted when send thread wakes up */ - return 0; -} -#endif - -/* - * USB device callbacks - */ -static struct usb_driver irda_driver = { - .name = "stir4200", - .probe = stir_probe, - .disconnect = stir_disconnect, - .id_table = dongles, -#ifdef CONFIG_PM - .suspend = stir_suspend, - .resume = stir_resume, -#endif -}; - -module_usb_driver(irda_driver); |