diff options
Diffstat (limited to 'drivers/staging/irda/net/irnet/irnet.h')
| -rw-r--r-- | drivers/staging/irda/net/irnet/irnet.h | 522 |
1 files changed, 0 insertions, 522 deletions
diff --git a/drivers/staging/irda/net/irnet/irnet.h b/drivers/staging/irda/net/irnet/irnet.h deleted file mode 100644 index 9d451f8ed47a..000000000000 --- a/drivers/staging/irda/net/irnet/irnet.h +++ /dev/null @@ -1,522 +0,0 @@ -/* - * IrNET protocol module : Synchronous PPP over an IrDA socket. - * - * Jean II - HPL `00 - <jt@hpl.hp.com> - * - * This file contains definitions and declarations global to the IrNET module, - * all grouped in one place... - * This file is a *private* header, so other modules don't want to know - * what's in there... - * - * Note : as most part of the Linux kernel, this module is available - * under the GNU General Public License (GPL). - */ - -#ifndef IRNET_H -#define IRNET_H - -/************************** DOCUMENTATION ***************************/ -/* - * What is IrNET - * ------------- - * IrNET is a protocol allowing to carry TCP/IP traffic between two - * IrDA peers in an efficient fashion. It is a thin layer, passing PPP - * packets to IrTTP and vice versa. It uses PPP in synchronous mode, - * because IrTTP offer a reliable sequenced packet service (as opposed - * to a byte stream). In fact, you could see IrNET as carrying TCP/IP - * in a IrDA socket, using PPP to provide the glue. - * - * The main difference with traditional PPP over IrCOMM is that we - * avoid the framing and serial emulation which are a performance - * bottleneck. It also allows multipoint communications in a sensible - * fashion. - * - * The main difference with IrLAN is that we use PPP for the link - * management, which is more standard, interoperable and flexible than - * the IrLAN protocol. For example, PPP adds authentication, - * encryption, compression, header compression and automated routing - * setup. And, as IrNET let PPP do the hard work, the implementation - * is much simpler than IrLAN. - * - * The Linux implementation - * ------------------------ - * IrNET is written on top of the Linux-IrDA stack, and interface with - * the generic Linux PPP driver. Because IrNET depend on recent - * changes of the PPP driver interface, IrNET will work only with very - * recent kernel (2.3.99-pre6 and up). - * - * The present implementation offer the following features : - * o simple user interface using pppd - * o efficient implementation (interface directly to PPP and IrTTP) - * o addressing (you can specify the name of the IrNET recipient) - * o multipoint operation (limited by IrLAP specification) - * o information in /proc/net/irda/irnet - * o IrNET events on /dev/irnet (for user space daemon) - * o IrNET daemon (irnetd) to automatically handle incoming requests - * o Windows 2000 compatibility (tested, but need more work) - * Currently missing : - * o Lot's of testing (that's your job) - * o Connection retries (may be too hard to do) - * o Check pppd persist mode - * o User space daemon (to automatically handle incoming requests) - * - * The setup is not currently the most easy, but this should get much - * better when everything will get integrated... - * - * Acknowledgements - * ---------------- - * This module is based on : - * o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras - * o The IrLAN protocol (irlan_common/XXX) by Dag Brattli - * o The IrSock interface (af_irda) by Dag Brattli - * o Some other bits from the kernel and my drivers... - * Infinite thanks to those brave souls for providing the infrastructure - * upon which IrNET is built. - * - * Thanks to all my colleagues in HP for helping me. In particular, - * thanks to Salil Pradhan and Bill Serra for W2k testing... - * Thanks to Luiz Magalhaes for irnetd and much testing... - * - * Thanks to Alan Cox for answering lot's of my stupid questions, and - * to Paul Mackerras answering my questions on how to best integrate - * IrNET and pppd. - * - * Jean II - * - * Note on some implementations choices... - * ------------------------------------ - * 1) Direct interface vs tty/socket - * I could have used a tty interface to hook to ppp and use the full - * socket API to connect to IrDA. The code would have been easier to - * maintain, and maybe the code would have been smaller... - * Instead, we hook directly to ppp_generic and to IrTTP, which make - * things more complicated... - * - * The first reason is flexibility : this allow us to create IrNET - * instances on demand (no /dev/ircommX crap) and to allow linkname - * specification on pppd command line... - * - * Second reason is speed optimisation. If you look closely at the - * transmit and receive paths, you will notice that they are "super lean" - * (that's why they look ugly), with no function calls and as little data - * copy and modification as I could... - * - * 2) irnetd in user space - * irnetd is implemented in user space, which is necessary to call pppd. - * This also give maximum benefits in term of flexibility and customability, - * and allow to offer the event channel, useful for other stuff like debug. - * - * On the other hand, this require a loose coordination between the - * present module and irnetd. One critical area is how incoming request - * are handled. - * When irnet receive an incoming request, it send an event to irnetd and - * drop the incoming IrNET socket. - * irnetd start a pppd instance, which create a new IrNET socket. This new - * socket is then connected in the originating node to the pppd instance. - * At this point, in the originating node, the first socket is closed. - * - * I admit, this is a bit messy and waste some resources. The alternative - * is caching incoming socket, and that's also quite messy and waste - * resources. - * We also make connection time slower. For example, on a 115 kb/s link it - * adds 60ms to the connection time (770 ms). However, this is slower than - * the time it takes to fire up pppd on my P133... - * - * - * History : - * ------- - * - * v1 - 15.5.00 - Jean II - * o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint) - * o control channel on /dev/irnet (set name/address) - * o event channel on /dev/irnet (for user space daemon) - * - * v2 - 5.6.00 - Jean II - * o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness... - * o Add DISCONNECT_TO event and rename DISCONNECT_FROM. - * o Set official device number alloaction on /dev/irnet - * - * v3 - 30.8.00 - Jean II - * o Update to latest Linux-IrDA changes : - * - queue_t => irda_queue_t - * o Update to ppp-2.4.0 : - * - move irda_irnet_connect from PPPIOCATTACH to TIOCSETD - * o Add EXPIRE event (depend on new IrDA-Linux patch) - * o Switch from `hashbin_remove' to `hashbin_remove_this' to fix - * a multilink bug... (depend on new IrDA-Linux patch) - * o fix a self->daddr to self->raddr in irda_irnet_connect to fix - * another multilink bug (darn !) - * o Remove LINKNAME_IOCTL cruft - * - * v3b - 31.8.00 - Jean II - * o Dump discovery log at event channel startup - * - * v4 - 28.9.00 - Jean II - * o Fix interaction between poll/select and dump discovery log - * o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch) - * o Add IRNET_NOANSWER_FROM event (mostly to help support) - * o Release flow control in disconnect_indication - * o Block packets while connecting (speed up connections) - * - * v5 - 11.01.01 - Jean II - * o Init self->max_header_size, just in case... - * o Set up ap->chan.hdrlen, to get zero copy on tx side working. - * o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state - * Thanks to Christian Gennerat for finding this bug ! - * --- - * o Declare the proper MTU/MRU that we can support - * (but PPP doesn't read the MTU value :-() - * o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid - * disabling and enabling irq twice - * - * v6 - 31.05.01 - Jean II - * o Print source address in Found, Discovery, Expiry & Request events - * o Print requested source address in /proc/net/irnet - * o Change control channel input. Allow multiple commands in one line. - * o Add saddr command to change ap->rsaddr (and use that in IrDA) - * --- - * o Make the IrDA connection procedure totally asynchronous. - * Heavy rewrite of the IAS query code and the whole connection - * procedure. Now, irnet_connect() no longer need to be called from - * a process context... - * o Enable IrDA connect retries in ppp_irnet_send(). The good thing - * is that IrDA connect retries are directly driven by PPP LCP - * retries (we retry for each LCP packet), so that everything - * is transparently controlled from pppd lcp-max-configure. - * o Add ttp_connect flag to prevent rentry on the connect procedure - * o Test and fixups to eliminate side effects of retries - * - * v7 - 22.08.01 - Jean II - * o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY" - * o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the - * asynchronous IAS query, self->tsap is NULL when PPP send the - * first packet. This was preventing "connect-delay 0" to work. - * Change the test in ppp_irnet_send() to self->ttp_connect. - * - * v8 - 1.11.01 - Jean II - * o Tighten the use of self->ttp_connect and self->ttp_open to - * prevent various race conditions. - * o Avoid leaking discovery log and skb - * o Replace "self" with "server" in irnet_connect_indication() to - * better detect cut'n'paste error ;-) - * - * v9 - 29.11.01 - Jean II - * o Fix event generation in disconnect indication that I broke in v8 - * It was always generation "No-Answer" because I was testing ttp_open - * just after clearing it. *blush*. - * o Use newly created irttp_listen() to fix potential crash when LAP - * destroyed before irnet module removed. - * - * v10 - 4.3.2 - Jean II - * o When receiving a disconnect indication, don't reenable the - * PPP Tx queue, this will trigger a reconnect. Instead, close - * the channel, which will kill pppd... - * - * v11 - 20.3.02 - Jean II - * o Oops ! v10 fix disabled IrNET retries and passive behaviour. - * Better fix in irnet_disconnect_indication() : - * - if connected, kill pppd via hangup. - * - if not connected, reenable ppp Tx, which trigger IrNET retry. - * - * v12 - 10.4.02 - Jean II - * o Fix race condition in irnet_connect_indication(). - * If the socket was already trying to connect, drop old connection - * and use new one only if acting as primary. See comments. - * - * v13 - 30.5.02 - Jean II - * o Update module init code - * - * v14 - 20.2.03 - Jean II - * o Add discovery hint bits in the control channel. - * o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner - * - * v15 - 7.4.03 - Jean II - * o Replace spin_lock_irqsave() with spin_lock_bh() so that we can - * use ppp_unit_number(). It's probably also better overall... - * o Disable call to ppp_unregister_channel(), because we can't do it. - */ - -/***************************** INCLUDES *****************************/ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/skbuff.h> -#include <linux/tty.h> -#include <linux/proc_fs.h> -#include <linux/netdevice.h> -#include <linux/poll.h> -#include <linux/capability.h> -#include <linux/ctype.h> /* isspace() */ -#include <linux/string.h> /* skip_spaces() */ -#include <linux/uaccess.h> -#include <linux/init.h> - -#include <linux/ppp_defs.h> -#include <linux/ppp-ioctl.h> -#include <linux/ppp_channel.h> - -#include <net/irda/irda.h> -#include <net/irda/iriap.h> -#include <net/irda/irias_object.h> -#include <net/irda/irlmp.h> -#include <net/irda/irttp.h> -#include <net/irda/discovery.h> - -/***************************** OPTIONS *****************************/ -/* - * Define or undefine to compile or not some optional part of the - * IrNET driver... - * Note : the present defaults make sense, play with that at your - * own risk... - */ -/* IrDA side of the business... */ -#define DISCOVERY_NOMASK /* To enable W2k compatibility... */ -#define ADVERTISE_HINT /* Advertise IrLAN hint bit */ -#define ALLOW_SIMULT_CONNECT /* This seem to work, cross fingers... */ -#define DISCOVERY_EVENTS /* Query the discovery log to post events */ -#define INITIAL_DISCOVERY /* Dump current discovery log as events */ -#undef STREAM_COMPAT /* Not needed - potentially messy */ -#undef CONNECT_INDIC_KICK /* Might mess IrDA, not needed */ -#undef FAIL_SEND_DISCONNECT /* Might mess IrDA, not needed */ -#undef PASS_CONNECT_PACKETS /* Not needed ? Safe */ -#undef MISSING_PPP_API /* Stuff I wish I could do */ - -/* PPP side of the business */ -#define BLOCK_WHEN_CONNECT /* Block packets when connecting */ -#define CONNECT_IN_SEND /* Retry IrDA connection procedure */ -#undef FLUSH_TO_PPP /* Not sure about this one, let's play safe */ -#undef SECURE_DEVIRNET /* Bah... */ - -/****************************** DEBUG ******************************/ - -/* - * This set of flags enable and disable all the various warning, - * error and debug message of this driver. - * Each section can be enabled and disabled independently - */ -/* In the PPP part */ -#define DEBUG_CTRL_TRACE 0 /* Control channel */ -#define DEBUG_CTRL_INFO 0 /* various info */ -#define DEBUG_CTRL_ERROR 1 /* problems */ -#define DEBUG_FS_TRACE 0 /* filesystem callbacks */ -#define DEBUG_FS_INFO 0 /* various info */ -#define DEBUG_FS_ERROR 1 /* problems */ -#define DEBUG_PPP_TRACE 0 /* PPP related functions */ -#define DEBUG_PPP_INFO 0 /* various info */ -#define DEBUG_PPP_ERROR 1 /* problems */ -#define DEBUG_MODULE_TRACE 0 /* module insertion/removal */ -#define DEBUG_MODULE_ERROR 1 /* problems */ - -/* In the IrDA part */ -#define DEBUG_IRDA_SR_TRACE 0 /* IRDA subroutines */ -#define DEBUG_IRDA_SR_INFO 0 /* various info */ -#define DEBUG_IRDA_SR_ERROR 1 /* problems */ -#define DEBUG_IRDA_SOCK_TRACE 0 /* IRDA main socket functions */ -#define DEBUG_IRDA_SOCK_INFO 0 /* various info */ -#define DEBUG_IRDA_SOCK_ERROR 1 /* problems */ -#define DEBUG_IRDA_SERV_TRACE 0 /* The IrNET server */ -#define DEBUG_IRDA_SERV_INFO 0 /* various info */ -#define DEBUG_IRDA_SERV_ERROR 1 /* problems */ -#define DEBUG_IRDA_TCB_TRACE 0 /* IRDA IrTTP callbacks */ -#define DEBUG_IRDA_CB_INFO 0 /* various info */ -#define DEBUG_IRDA_CB_ERROR 1 /* problems */ -#define DEBUG_IRDA_OCB_TRACE 0 /* IRDA other callbacks */ -#define DEBUG_IRDA_OCB_INFO 0 /* various info */ -#define DEBUG_IRDA_OCB_ERROR 1 /* problems */ - -#define DEBUG_ASSERT 0 /* Verify all assertions */ - -/* - * These are the macros we are using to actually print the debug - * statements. Don't look at it, it's ugly... - * - * One of the trick is that, as the DEBUG_XXX are constant, the - * compiler will optimise away the if() in all cases. - */ -/* All error messages (will show up in the normal logs) */ -#define DERROR(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_INFO "irnet: %s(): " format, __func__ , ##args);} - -/* Normal debug message (will show up in /var/log/debug) */ -#define DEBUG(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: %s(): " format, __func__ , ##args);} - -/* Entering a function (trace) */ -#define DENTER(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: -> %s" format, __func__ , ##args);} - -/* Entering and exiting a function in one go (trace) */ -#define DPASS(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: <>%s" format, __func__ , ##args);} - -/* Exiting a function (trace) */ -#define DEXIT(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: <-%s()" format, __func__ , ##args);} - -/* Exit a function with debug */ -#define DRETURN(ret, dbg, args...) \ - {DEXIT(dbg, ": " args);\ - return ret; } - -/* Exit a function on failed condition */ -#define DABORT(cond, ret, dbg, args...) \ - {if(cond) {\ - DERROR(dbg, args);\ - return ret; }} - -/* Invalid assertion, print out an error and exit... */ -#define DASSERT(cond, ret, dbg, args...) \ - {if((DEBUG_ASSERT) && !(cond)) {\ - DERROR(dbg, "Invalid assertion: " args);\ - return ret; }} - -/************************ CONSTANTS & MACROS ************************/ - -/* Paranoia */ -#define IRNET_MAGIC 0xB00754 - -/* Number of control events in the control channel buffer... */ -#define IRNET_MAX_EVENTS 8 /* Should be more than enough... */ - -/****************************** TYPES ******************************/ - -/* - * This is the main structure where we store all the data pertaining to - * one instance of irnet. - * Note : in irnet functions, a pointer this structure is usually called - * "ap" or "self". If the code is borrowed from the IrDA stack, it tend - * to be called "self", and if it is borrowed from the PPP driver it is - * "ap". Apart from that, it's exactly the same structure ;-) - */ -typedef struct irnet_socket -{ - /* ------------------- Instance management ------------------- */ - /* We manage a linked list of IrNET socket instances */ - irda_queue_t q; /* Must be first - for hasbin */ - int magic; /* Paranoia */ - - /* --------------------- FileSystem part --------------------- */ - /* "pppd" interact directly with us on a /dev/ file */ - struct file * file; /* File descriptor of this instance */ - /* TTY stuff - to keep "pppd" happy */ - struct ktermios termios; /* Various tty flags */ - /* Stuff for the control channel */ - int event_index; /* Last read in the event log */ - - /* ------------------------- PPP part ------------------------- */ - /* We interface directly to the ppp_generic driver in the kernel */ - int ppp_open; /* registered with ppp_generic */ - struct ppp_channel chan; /* Interface to generic ppp layer */ - - int mru; /* Max size of PPP payload */ - u32 xaccm[8]; /* Asynchronous character map (just */ - u32 raccm; /* to please pppd - dummy) */ - unsigned int flags; /* PPP flags (compression, ...) */ - unsigned int rbits; /* Unused receive flags ??? */ - struct work_struct disconnect_work; /* Process context disconnection */ - /* ------------------------ IrTTP part ------------------------ */ - /* We create a pseudo "socket" over the IrDA tranport */ - unsigned long ttp_open; /* Set when IrTTP is ready */ - unsigned long ttp_connect; /* Set when IrTTP is connecting */ - struct tsap_cb * tsap; /* IrTTP instance (the connection) */ - - char rname[NICKNAME_MAX_LEN + 1]; - /* IrDA nickname of destination */ - __u32 rdaddr; /* Requested peer IrDA address */ - __u32 rsaddr; /* Requested local IrDA address */ - __u32 daddr; /* actual peer IrDA address */ - __u32 saddr; /* my local IrDA address */ - __u8 dtsap_sel; /* Remote TSAP selector */ - __u8 stsap_sel; /* Local TSAP selector */ - - __u32 max_sdu_size_rx;/* Socket parameters used for IrTTP */ - __u32 max_sdu_size_tx; - __u32 max_data_size; - __u8 max_header_size; - LOCAL_FLOW tx_flow; /* State of the Tx path in IrTTP */ - - /* ------------------- IrLMP and IrIAS part ------------------- */ - /* Used for IrDA Discovery and socket name resolution */ - void * ckey; /* IrLMP client handle */ - __u16 mask; /* Hint bits mask (filter discov.)*/ - int nslots; /* Number of slots for discovery */ - - struct iriap_cb * iriap; /* Used to query remote IAS */ - int errno; /* status of the IAS query */ - - /* -------------------- Discovery log part -------------------- */ - /* Used by initial discovery on the control channel - * and by irnet_discover_daddr_and_lsap_sel() */ - struct irda_device_info *discoveries; /* Copy of the discovery log */ - int disco_index; /* Last read in the discovery log */ - int disco_number; /* Size of the discovery log */ - - struct mutex lock; - -} irnet_socket; - -/* - * This is the various event that we will generate on the control channel - */ -typedef enum irnet_event -{ - IRNET_DISCOVER, /* New IrNET node discovered */ - IRNET_EXPIRE, /* IrNET node expired */ - IRNET_CONNECT_TO, /* IrNET socket has connected to other node */ - IRNET_CONNECT_FROM, /* Other node has connected to IrNET socket */ - IRNET_REQUEST_FROM, /* Non satisfied connection request */ - IRNET_NOANSWER_FROM, /* Failed connection request */ - IRNET_BLOCKED_LINK, /* Link (IrLAP) is blocked for > 3s */ - IRNET_DISCONNECT_FROM, /* IrNET socket has disconnected */ - IRNET_DISCONNECT_TO /* Closing IrNET socket */ -} irnet_event; - -/* - * This is the storage for an event and its arguments - */ -typedef struct irnet_log -{ - irnet_event event; - int unit; - __u32 saddr; - __u32 daddr; - char name[NICKNAME_MAX_LEN + 1]; /* 21 + 1 */ - __u16_host_order hints; /* Discovery hint bits */ -} irnet_log; - -/* - * This is the storage for all events and related stuff... - */ -typedef struct irnet_ctrl_channel -{ - irnet_log log[IRNET_MAX_EVENTS]; /* Event log */ - int index; /* Current index in log */ - spinlock_t spinlock; /* Serialize access to the event log */ - wait_queue_head_t rwait; /* processes blocked on read (or poll) */ -} irnet_ctrl_channel; - -/**************************** PROTOTYPES ****************************/ -/* - * Global functions of the IrNET module - * Note : we list here also functions called from one file to the other. - */ - -/* -------------------------- IRDA PART -------------------------- */ -int irda_irnet_create(irnet_socket *); /* Initialise an IrNET socket */ -int irda_irnet_connect(irnet_socket *); /* Try to connect over IrDA */ -void irda_irnet_destroy(irnet_socket *); /* Teardown an IrNET socket */ -int irda_irnet_init(void); /* Initialise IrDA part of IrNET */ -void irda_irnet_cleanup(void); /* Teardown IrDA part of IrNET */ - -/**************************** VARIABLES ****************************/ - -/* Control channel stuff - allocated in irnet_irda.h */ -extern struct irnet_ctrl_channel irnet_events; - -#endif /* IRNET_H */ |