diff options
Diffstat (limited to 'drivers/staging/media/deprecated/cpia2/cpia2.h')
| -rw-r--r-- | drivers/staging/media/deprecated/cpia2/cpia2.h | 475 |
1 files changed, 0 insertions, 475 deletions
diff --git a/drivers/staging/media/deprecated/cpia2/cpia2.h b/drivers/staging/media/deprecated/cpia2/cpia2.h deleted file mode 100644 index 57b7f1ea68da..000000000000 --- a/drivers/staging/media/deprecated/cpia2/cpia2.h +++ /dev/null @@ -1,475 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/**************************************************************************** - * - * Filename: cpia2.h - * - * Copyright 2001, STMicrolectronics, Inc. - * - * Contact: steve.miller@st.com - * - * Description: - * This is a USB driver for CPiA2 based video cameras. - * - * This driver is modelled on the cpia usb driver by - * Jochen Scharrlach and Johannes Erdfeldt. - * - ****************************************************************************/ - -#ifndef __CPIA2_H__ -#define __CPIA2_H__ - -#include <linux/videodev2.h> -#include <linux/usb.h> -#include <linux/poll.h> -#include <media/v4l2-common.h> -#include <media/v4l2-device.h> -#include <media/v4l2-ctrls.h> - -#include "cpia2_registers.h" - -/* define for verbose debug output */ -//#define _CPIA2_DEBUG_ - -/*** - * Image defines - ***/ - -/* Misc constants */ -#define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */ - -/* USB Transfer mode */ -#define XFER_ISOC 0 -#define XFER_BULK 1 - -/* USB Alternates */ -#define USBIF_CMDONLY 0 -#define USBIF_BULK 1 -#define USBIF_ISO_1 2 /* 128 bytes/ms */ -#define USBIF_ISO_2 3 /* 384 bytes/ms */ -#define USBIF_ISO_3 4 /* 640 bytes/ms */ -#define USBIF_ISO_4 5 /* 768 bytes/ms */ -#define USBIF_ISO_5 6 /* 896 bytes/ms */ -#define USBIF_ISO_6 7 /* 1023 bytes/ms */ - -/* Flicker Modes */ -#define NEVER_FLICKER 0 -#define FLICKER_60 60 -#define FLICKER_50 50 - -/* Debug flags */ -#define DEBUG_NONE 0 -#define DEBUG_REG 0x00000001 -#define DEBUG_DUMP_PATCH 0x00000002 -#define DEBUG_DUMP_REGS 0x00000004 - -/*** - * Video frame sizes - ***/ -enum { - VIDEOSIZE_VGA = 0, /* 640x480 */ - VIDEOSIZE_CIF, /* 352x288 */ - VIDEOSIZE_QVGA, /* 320x240 */ - VIDEOSIZE_QCIF, /* 176x144 */ - VIDEOSIZE_288_216, - VIDEOSIZE_256_192, - VIDEOSIZE_224_168, - VIDEOSIZE_192_144, -}; - -#define STV_IMAGE_CIF_ROWS 288 -#define STV_IMAGE_CIF_COLS 352 - -#define STV_IMAGE_QCIF_ROWS 144 -#define STV_IMAGE_QCIF_COLS 176 - -#define STV_IMAGE_VGA_ROWS 480 -#define STV_IMAGE_VGA_COLS 640 - -#define STV_IMAGE_QVGA_ROWS 240 -#define STV_IMAGE_QVGA_COLS 320 - -#define JPEG_MARKER_COM (1<<6) /* Comment segment */ - -/*** - * Enums - ***/ -/* Sensor types available with cpia2 asics */ -enum sensors { - CPIA2_SENSOR_410, - CPIA2_SENSOR_500 -}; - -/* Asic types available in the CPiA2 architecture */ -#define CPIA2_ASIC_672 0x67 - -/* Device types (stv672, stv676, etc) */ -#define DEVICE_STV_672 0x0001 -#define DEVICE_STV_676 0x0002 - -enum frame_status { - FRAME_EMPTY, - FRAME_READING, /* In the process of being grabbed into */ - FRAME_READY, /* Ready to be read */ - FRAME_ERROR, -}; - -/*** - * Register access (for USB request byte) - ***/ -enum { - CAMERAACCESS_SYSTEM = 0, - CAMERAACCESS_VC, - CAMERAACCESS_VP, - CAMERAACCESS_IDATA -}; - -#define CAMERAACCESS_TYPE_BLOCK 0x00 -#define CAMERAACCESS_TYPE_RANDOM 0x04 -#define CAMERAACCESS_TYPE_MASK 0x08 -#define CAMERAACCESS_TYPE_REPEAT 0x0C - -#define TRANSFER_READ 0 -#define TRANSFER_WRITE 1 - -#define DEFAULT_ALT USBIF_ISO_6 -#define DEFAULT_BRIGHTNESS 0x46 -#define DEFAULT_CONTRAST 0x93 -#define DEFAULT_SATURATION 0x7f - -/* Power state */ -#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER -#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER - - -/******** - * Commands - *******/ -enum { - CPIA2_CMD_NONE = 0, - CPIA2_CMD_GET_VERSION, - CPIA2_CMD_GET_PNP_ID, - CPIA2_CMD_GET_ASIC_TYPE, - CPIA2_CMD_GET_SENSOR, - CPIA2_CMD_GET_VP_DEVICE, - CPIA2_CMD_GET_VP_BRIGHTNESS, - CPIA2_CMD_SET_VP_BRIGHTNESS, - CPIA2_CMD_GET_CONTRAST, - CPIA2_CMD_SET_CONTRAST, - CPIA2_CMD_GET_VP_SATURATION, - CPIA2_CMD_SET_VP_SATURATION, - CPIA2_CMD_GET_VP_GPIO_DIRECTION, - CPIA2_CMD_SET_VP_GPIO_DIRECTION, - CPIA2_CMD_GET_VP_GPIO_DATA, - CPIA2_CMD_SET_VP_GPIO_DATA, - CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, - CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, - CPIA2_CMD_GET_VC_MP_GPIO_DATA, - CPIA2_CMD_SET_VC_MP_GPIO_DATA, - CPIA2_CMD_ENABLE_PACKET_CTRL, - CPIA2_CMD_GET_FLICKER_MODES, - CPIA2_CMD_SET_FLICKER_MODES, - CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */ - CPIA2_CMD_SET_HI_POWER, - CPIA2_CMD_SET_LOW_POWER, - CPIA2_CMD_CLEAR_V2W_ERR, - CPIA2_CMD_SET_USER_MODE, - CPIA2_CMD_GET_USER_MODE, - CPIA2_CMD_FRAMERATE_REQ, - CPIA2_CMD_SET_COMPRESSION_STATE, - CPIA2_CMD_GET_WAKEUP, - CPIA2_CMD_SET_WAKEUP, - CPIA2_CMD_GET_PW_CONTROL, - CPIA2_CMD_SET_PW_CONTROL, - CPIA2_CMD_GET_SYSTEM_CTRL, - CPIA2_CMD_SET_SYSTEM_CTRL, - CPIA2_CMD_GET_VP_SYSTEM_STATE, - CPIA2_CMD_GET_VP_SYSTEM_CTRL, - CPIA2_CMD_SET_VP_SYSTEM_CTRL, - CPIA2_CMD_GET_VP_EXP_MODES, - CPIA2_CMD_SET_VP_EXP_MODES, - CPIA2_CMD_GET_DEVICE_CONFIG, - CPIA2_CMD_SET_DEVICE_CONFIG, - CPIA2_CMD_SET_SERIAL_ADDR, - CPIA2_CMD_SET_SENSOR_CR1, - CPIA2_CMD_GET_VC_CONTROL, - CPIA2_CMD_SET_VC_CONTROL, - CPIA2_CMD_SET_TARGET_KB, - CPIA2_CMD_SET_DEF_JPEG_OPT, - CPIA2_CMD_REHASH_VP4, - CPIA2_CMD_GET_USER_EFFECTS, - CPIA2_CMD_SET_USER_EFFECTS -}; - -enum user_cmd { - COMMAND_NONE = 0x00000001, - COMMAND_SET_FPS = 0x00000002, - COMMAND_SET_COLOR_PARAMS = 0x00000004, - COMMAND_GET_COLOR_PARAMS = 0x00000008, - COMMAND_SET_FORMAT = 0x00000010, /* size, etc */ - COMMAND_SET_FLICKER = 0x00000020 -}; - -/*** - * Some defines specific to the 676 chip - ***/ -#define CAMACC_CIF 0x01 -#define CAMACC_VGA 0x02 -#define CAMACC_QCIF 0x04 -#define CAMACC_QVGA 0x08 - - -struct cpia2_register { - u8 index; - u8 value; -}; - -struct cpia2_reg_mask { - u8 index; - u8 and_mask; - u8 or_mask; - u8 fill; -}; - -struct cpia2_command { - u32 command; - u8 req_mode; /* (Block or random) | registerBank */ - u8 reg_count; - u8 direction; - u8 start; - union reg_types { - struct cpia2_register registers[32]; - struct cpia2_reg_mask masks[16]; - u8 block_data[64]; - u8 *patch_data; /* points to function defined block */ - } buffer; -}; - -struct camera_params { - struct { - u8 firmware_revision_hi; /* For system register set (bank 0) */ - u8 firmware_revision_lo; - u8 asic_id; /* Video Compressor set (bank 1) */ - u8 asic_rev; - u8 vp_device_hi; /* Video Processor set (bank 2) */ - u8 vp_device_lo; - u8 sensor_flags; - u8 sensor_rev; - } version; - - struct { - u32 device_type; /* enumerated from vendor/product ids. - * Currently, either STV_672 or STV_676 */ - u16 vendor; - u16 product; - u16 device_revision; - } pnp_id; - - struct { - u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */ - u8 contrast; /* Note: this is CPIA2_VP_YRANGE */ - u8 saturation; /* CPIA2_VP_SATURATION */ - } color_params; - - struct { - u8 cam_register; - u8 flicker_mode_req; /* 1 if flicker on, else never flicker */ - } flicker_control; - - struct { - u8 jpeg_options; - u8 creep_period; - u8 user_squeeze; - u8 inhibit_htables; - } compression; - - struct { - u8 ohsize; /* output image size */ - u8 ovsize; - u8 hcrop; /* cropping start_pos/4 */ - u8 vcrop; - u8 hphase; /* scaling registers */ - u8 vphase; - u8 hispan; - u8 vispan; - u8 hicrop; - u8 vicrop; - u8 hifraction; - u8 vifraction; - } image_size; - - struct { - int width; /* actual window width */ - int height; /* actual window height */ - } roi; - - struct { - u8 video_mode; - u8 frame_rate; - u8 video_size; /* Not a register, just a convenience for cropped sizes */ - u8 gpio_direction; - u8 gpio_data; - u8 system_ctrl; - u8 system_state; - u8 lowlight_boost; /* Bool: 0 = off, 1 = on */ - u8 device_config; - u8 exposure_modes; - u8 user_effects; - } vp_params; - - struct { - u8 pw_control; - u8 wakeup; - u8 vc_control; - u8 vc_mp_direction; - u8 vc_mp_data; - u8 quality; - } vc_params; - - struct { - u8 power_mode; - u8 system_ctrl; - u8 stream_mode; /* This is the current alternate for usb drivers */ - u8 allow_corrupt; - } camera_state; -}; - -#define NUM_SBUF 2 - -struct cpia2_sbuf { - char *data; - struct urb *urb; -}; - -struct framebuf { - u64 ts; - unsigned long seq; - int num; - int length; - int max_length; - volatile enum frame_status status; - u8 *data; - struct framebuf *next; -}; - -struct camera_data { - /* locks */ - struct v4l2_device v4l2_dev; - struct mutex v4l2_lock; /* serialize file operations */ - struct v4l2_ctrl_handler hdl; - struct { - /* Lights control cluster */ - struct v4l2_ctrl *top_light; - struct v4l2_ctrl *bottom_light; - }; - struct v4l2_ctrl *usb_alt; - - /* camera status */ - int first_image_seen; - enum sensors sensor_type; - u8 flush; - struct v4l2_fh *stream_fh; - u8 mmapped; - int streaming; /* 0 = no, 1 = yes */ - int xfer_mode; /* XFER_BULK or XFER_ISOC */ - struct camera_params params; /* camera settings */ - - /* v4l */ - int video_size; /* VIDEO_SIZE_ */ - struct video_device vdev; /* v4l videodev */ - u32 width; - u32 height; /* Its size */ - __u32 pixelformat; /* Format fourcc */ - - /* USB */ - struct usb_device *dev; - unsigned char iface; - unsigned int cur_alt; - unsigned int old_alt; - struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */ - - wait_queue_head_t wq_stream; - - /* Buffering */ - u32 frame_size; - int num_frames; - unsigned long frame_count; - u8 *frame_buffer; /* frame buffer data */ - struct framebuf *buffers; - struct framebuf * volatile curbuff; - struct framebuf *workbuff; - - /* MJPEG Extension */ - int APPn; /* Number of APP segment to be written, must be 0..15 */ - int APP_len; /* Length of data in JPEG APPn segment */ - char APP_data[60]; /* Data in the JPEG APPn segment. */ - - int COM_len; /* Length of data in JPEG COM segment */ - char COM_data[60]; /* Data in JPEG COM segment */ -}; - -/* v4l */ -int cpia2_register_camera(struct camera_data *cam); -void cpia2_unregister_camera(struct camera_data *cam); -void cpia2_camera_release(struct v4l2_device *v4l2_dev); - -/* core */ -int cpia2_reset_camera(struct camera_data *cam); -int cpia2_set_low_power(struct camera_data *cam); -void cpia2_dbg_dump_registers(struct camera_data *cam); -int cpia2_match_video_size(int width, int height); -void cpia2_set_camera_state(struct camera_data *cam); -void cpia2_save_camera_state(struct camera_data *cam); -void cpia2_set_color_params(struct camera_data *cam); -void cpia2_set_brightness(struct camera_data *cam, unsigned char value); -void cpia2_set_contrast(struct camera_data *cam, unsigned char value); -void cpia2_set_saturation(struct camera_data *cam, unsigned char value); -int cpia2_set_flicker_mode(struct camera_data *cam, int mode); -void cpia2_set_format(struct camera_data *cam); -int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd); -int cpia2_do_command(struct camera_data *cam, - unsigned int command, - unsigned char direction, unsigned char param); -void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf); -struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf); -int cpia2_init_camera(struct camera_data *cam); -int cpia2_allocate_buffers(struct camera_data *cam); -void cpia2_free_buffers(struct camera_data *cam); -long cpia2_read(struct camera_data *cam, - char __user *buf, unsigned long count, int noblock); -__poll_t cpia2_poll(struct camera_data *cam, - struct file *filp, poll_table *wait); -int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma); -void cpia2_set_property_flip(struct camera_data *cam, int prop_val); -void cpia2_set_property_mirror(struct camera_data *cam, int prop_val); -int cpia2_set_gpio(struct camera_data *cam, unsigned char setting); -int cpia2_set_fps(struct camera_data *cam, int framerate); - -/* usb */ -int cpia2_usb_init(void); -void cpia2_usb_cleanup(void); -int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers, - u8 request, u8 start, u8 count, u8 direction); -int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate); -int cpia2_usb_stream_stop(struct camera_data *cam); -int cpia2_usb_stream_pause(struct camera_data *cam); -int cpia2_usb_stream_resume(struct camera_data *cam); -int cpia2_usb_change_streaming_alternate(struct camera_data *cam, - unsigned int alt); - - -/* ----------------------- debug functions ---------------------- */ -#ifdef _CPIA2_DEBUG_ -#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args) -#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args) -#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args) -#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args) -#else -#define ALOG(fmt,args...) printk(fmt,##args) -#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args) -#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args) -#define DBG(fmn,args...) do {} while(0) -#endif -/* No function or lineno, for shorter lines */ -#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args) - -#endif |