diff options
Diffstat (limited to 'drivers/staging/r8188eu/hal/rtl8188e_hal_init.c')
-rw-r--r-- | drivers/staging/r8188eu/hal/rtl8188e_hal_init.c | 922 |
1 files changed, 0 insertions, 922 deletions
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c deleted file mode 100644 index 73855bca76fe..000000000000 --- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c +++ /dev/null @@ -1,922 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 2007 - 2011 Realtek Corporation. */ - -#define _HAL_INIT_C_ - -#include "../include/drv_types.h" -#include "../include/rtw_efuse.h" -#include "../include/rtl8188e_hal.h" -#include "../include/rtw_iol.h" -#include "../include/usb_ops.h" -#include "../include/rtw_fw.h" - -static void iol_mode_enable(struct adapter *padapter, u8 enable) -{ - u8 reg_0xf0 = 0; - int res; - - if (enable) { - /* Enable initial offload */ - res = rtw_read8(padapter, REG_SYS_CFG, ®_0xf0); - if (res) - return; - - rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 | SW_OFFLOAD_EN); - - if (!padapter->bFWReady) - rtw_reset_8051(padapter); - - } else { - /* disable initial offload */ - res = rtw_read8(padapter, REG_SYS_CFG, ®_0xf0); - if (res) - return; - - rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN); - } -} - -static s32 iol_execute(struct adapter *padapter, u8 control) -{ - s32 status = _FAIL; - u8 reg_0x88 = 0; - unsigned long timeout; - int res; - - control = control & 0x0f; - res = rtw_read8(padapter, REG_HMEBOX_E0, ®_0x88); - if (res) - return _FAIL; - - rtw_write8(padapter, REG_HMEBOX_E0, reg_0x88 | control); - - timeout = jiffies + msecs_to_jiffies(1000); - - do { - res = rtw_read8(padapter, REG_HMEBOX_E0, ®_0x88); - if (res) - continue; - - if (!(reg_0x88 & control)) - break; - - } while (time_before(jiffies, timeout)); - - res = rtw_read8(padapter, REG_HMEBOX_E0, ®_0x88); - if (res) - return _FAIL; - - status = (reg_0x88 & control) ? _FAIL : _SUCCESS; - if (reg_0x88 & control << 4) - status = _FAIL; - return status; -} - -static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy) -{ - s32 rst = _SUCCESS; - iol_mode_enable(padapter, 1); - rtw_write8(padapter, REG_TDECTRL + 1, txpktbuf_bndy); - rst = iol_execute(padapter, CMD_INIT_LLT); - iol_mode_enable(padapter, 0); - return rst; -} - -static void -efuse_phymap_to_logical(u8 *phymap, u16 _size_byte, u8 *pbuf) -{ - u8 *efuseTbl = NULL; - u8 rtemp8; - u16 eFuse_Addr = 0; - u8 offset, wren; - u16 i, j; - u16 **eFuseWord = NULL; - u8 u1temp = 0; - - efuseTbl = kzalloc(EFUSE_MAP_LEN_88E, GFP_KERNEL); - if (!efuseTbl) - goto exit; - - eFuseWord = rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); - if (!eFuseWord) - goto exit; - - /* 0. Refresh efuse init map as all oxFF. */ - for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) - for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) - eFuseWord[i][j] = 0xFFFF; - - /* */ - /* 1. Read the first byte to check if efuse is empty!!! */ - /* */ - /* */ - rtemp8 = *(phymap + eFuse_Addr); - if (rtemp8 != 0xFF) { - eFuse_Addr++; - } else { - goto exit; - } - - /* */ - /* 2. Read real efuse content. Filter PG header and every section data. */ - /* */ - while ((rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { - /* Check PG header for section num. */ - if ((rtemp8 & 0x1F) == 0x0F) { /* extended header */ - u1temp = ((rtemp8 & 0xE0) >> 5); - rtemp8 = *(phymap + eFuse_Addr); - if ((rtemp8 & 0x0F) == 0x0F) { - eFuse_Addr++; - rtemp8 = *(phymap + eFuse_Addr); - - if (rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) - eFuse_Addr++; - continue; - } else { - offset = ((rtemp8 & 0xF0) >> 1) | u1temp; - wren = (rtemp8 & 0x0F); - eFuse_Addr++; - } - } else { - offset = ((rtemp8 >> 4) & 0x0f); - wren = (rtemp8 & 0x0f); - } - - if (offset < EFUSE_MAX_SECTION_88E) { - /* Get word enable value from PG header */ - for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { - /* Check word enable condition in the section */ - if (!(wren & 0x01)) { - rtemp8 = *(phymap + eFuse_Addr); - eFuse_Addr++; - eFuseWord[offset][i] = (rtemp8 & 0xff); - if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) - break; - rtemp8 = *(phymap + eFuse_Addr); - eFuse_Addr++; - eFuseWord[offset][i] |= (((u16)rtemp8 << 8) & 0xff00); - - if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) - break; - } - wren >>= 1; - } - } - /* Read next PG header */ - rtemp8 = *(phymap + eFuse_Addr); - - if (rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { - eFuse_Addr++; - } - } - - /* */ - /* 3. Collect 16 sections and 4 word unit into Efuse map. */ - /* */ - for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) { - for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) { - efuseTbl[(i * 8) + (j * 2)] = (eFuseWord[i][j] & 0xff); - efuseTbl[(i * 8) + ((j * 2) + 1)] = ((eFuseWord[i][j] >> 8) & 0xff); - } - } - - /* */ - /* 4. Copy from Efuse map to output pointer memory!!! */ - /* */ - memcpy(pbuf, efuseTbl, _size_byte); - -exit: - kfree(efuseTbl); - kfree(eFuseWord); -} - -/* FIXME: add error handling in callers */ -static int efuse_read_phymap_from_txpktbuf( - struct adapter *adapter, - u8 *content, /* buffer to store efuse physical map */ - u16 *size /* for efuse content: the max byte to read. will update to byte read */ - ) -{ - unsigned long timeout; - __le32 lo32 = 0, hi32 = 0; - u16 len = 0, count = 0; - int i = 0, res; - u16 limit = *size; - u8 reg; - u8 *pos = content; - u32 reg32; - - rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT); - - while (1) { - rtw_write16(adapter, REG_PKTBUF_DBG_ADDR, i); - - rtw_write8(adapter, REG_TXPKTBUF_DBG, 0); - timeout = jiffies + msecs_to_jiffies(1000); - do { - res = rtw_read8(adapter, REG_TXPKTBUF_DBG, ®); - if (res) - continue; - - if (reg) - break; - - msleep(1); - } while (time_before(jiffies, timeout)); - - /* data from EEPROM needs to be in LE */ - res = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_L, ®32); - if (res) - return res; - - lo32 = cpu_to_le32(reg32); - - res = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_H, ®32); - if (res) - return res; - - hi32 = cpu_to_le32(reg32); - - if (i == 0) { - u16 reg; - - /* Although lenc is only used in a debug statement, - * do not remove it as the rtw_read16() call consumes - * 2 bytes from the EEPROM source. - */ - res = rtw_read16(adapter, REG_PKTBUF_DBG_DATA_L, ®); - if (res) - return res; - - len = le32_to_cpu(lo32) & 0x0000ffff; - - limit = (len - 2 < limit) ? len - 2 : limit; - - memcpy(pos, ((u8 *)&lo32) + 2, (limit >= count + 2) ? 2 : limit - count); - count += (limit >= count + 2) ? 2 : limit - count; - pos = content + count; - } else { - memcpy(pos, ((u8 *)&lo32), (limit >= count + 4) ? 4 : limit - count); - count += (limit >= count + 4) ? 4 : limit - count; - pos = content + count; - } - - if (limit > count && len - 2 > count) { - memcpy(pos, (u8 *)&hi32, (limit >= count + 4) ? 4 : limit - count); - count += (limit >= count + 4) ? 4 : limit - count; - pos = content + count; - } - - if (limit <= count || len - 2 <= count) - break; - i++; - } - rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, DISABLE_TRXPKT_BUF_ACCESS); - *size = count; - - return 0; -} - -static s32 iol_read_efuse(struct adapter *padapter, u16 size_byte, u8 *logical_map) -{ - s32 status = _FAIL; - u8 physical_map[512]; - u16 size = 512; - - rtw_write8(padapter, REG_TDECTRL + 1, 0); - memset(physical_map, 0xFF, 512); - rtw_write8(padapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT); - status = iol_execute(padapter, CMD_READ_EFUSE_MAP); - if (status == _SUCCESS) - efuse_read_phymap_from_txpktbuf(padapter, physical_map, &size); - efuse_phymap_to_logical(physical_map, size_byte, logical_map); - return status; -} - -s32 rtl8188e_iol_efuse_patch(struct adapter *padapter) -{ - s32 result = _SUCCESS; - - if (rtw_IOL_applied(padapter)) { - iol_mode_enable(padapter, 1); - result = iol_execute(padapter, CMD_READ_EFUSE_MAP); - if (result == _SUCCESS) - result = iol_execute(padapter, CMD_EFUSE_PATCH); - - iol_mode_enable(padapter, 0); - } - return result; -} - -static s32 iol_ioconfig(struct adapter *padapter, u8 iocfg_bndy) -{ - s32 rst = _SUCCESS; - - rtw_write8(padapter, REG_TDECTRL + 1, iocfg_bndy); - rst = iol_execute(padapter, CMD_IOCONFIG); - return rst; -} - -int rtl8188e_IOL_exec_cmds_sync(struct adapter *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms, u32 bndy_cnt) -{ - struct pkt_attrib *pattrib = &xmit_frame->attrib; - u8 i; - int ret = _FAIL; - - if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS) - goto exit; - if (rtw_usb_bulk_size_boundary(adapter, TXDESC_SIZE + pattrib->last_txcmdsz)) { - if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS) - goto exit; - } - - dump_mgntframe_and_wait(adapter, xmit_frame, max_wating_ms); - - iol_mode_enable(adapter, 1); - for (i = 0; i < bndy_cnt; i++) { - u8 page_no = 0; - page_no = i * 2; - ret = iol_ioconfig(adapter, page_no); - if (ret != _SUCCESS) - break; - } - iol_mode_enable(adapter, 0); -exit: - /* restore BCN_HEAD */ - rtw_write8(adapter, REG_TDECTRL + 1, 0); - return ret; -} - -void rtl8188e_EfusePowerSwitch(struct adapter *pAdapter, u8 PwrState) -{ - u16 tmpV16; - int res; - - if (PwrState) { - rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON); - - /* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), default valid */ - res = rtw_read16(pAdapter, REG_SYS_ISO_CTRL, &tmpV16); - if (res) - return; - - if (!(tmpV16 & PWC_EV12V)) { - tmpV16 |= PWC_EV12V; - rtw_write16(pAdapter, REG_SYS_ISO_CTRL, tmpV16); - } - /* Reset: 0x0000h[28], default valid */ - res = rtw_read16(pAdapter, REG_SYS_FUNC_EN, &tmpV16); - if (res) - return; - - if (!(tmpV16 & FEN_ELDR)) { - tmpV16 |= FEN_ELDR; - rtw_write16(pAdapter, REG_SYS_FUNC_EN, tmpV16); - } - - /* Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid */ - res = rtw_read16(pAdapter, REG_SYS_CLKR, &tmpV16); - if (res) - return; - - if ((!(tmpV16 & LOADER_CLK_EN)) || (!(tmpV16 & ANA8M))) { - tmpV16 |= (LOADER_CLK_EN | ANA8M); - rtw_write16(pAdapter, REG_SYS_CLKR, tmpV16); - } - } else { - rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF); - } -} - -static void Hal_EfuseReadEFuse88E(struct adapter *Adapter, - u16 _offset, - u16 _size_byte, - u8 *pbuf) -{ - u8 *efuseTbl = NULL; - u8 rtemp8[1]; - u16 eFuse_Addr = 0; - u8 offset, wren; - u16 i, j; - u16 **eFuseWord = NULL; - u16 efuse_utilized = 0; - u8 u1temp = 0; - - /* */ - /* Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10. */ - /* */ - if ((_offset + _size_byte) > EFUSE_MAP_LEN_88E) /* total E-Fuse table is 512bytes */ - goto exit; - - efuseTbl = kzalloc(EFUSE_MAP_LEN_88E, GFP_KERNEL); - if (!efuseTbl) - goto exit; - - eFuseWord = rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16)); - if (!eFuseWord) - goto exit; - - /* 0. Refresh efuse init map as all oxFF. */ - for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) - for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) - eFuseWord[i][j] = 0xFFFF; - - /* */ - /* 1. Read the first byte to check if efuse is empty!!! */ - /* */ - /* */ - ReadEFuseByte(Adapter, eFuse_Addr, rtemp8); - if (*rtemp8 != 0xFF) { - efuse_utilized++; - eFuse_Addr++; - } else { - goto exit; - } - - /* */ - /* 2. Read real efuse content. Filter PG header and every section data. */ - /* */ - while ((*rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { - /* Check PG header for section num. */ - if ((*rtemp8 & 0x1F) == 0x0F) { /* extended header */ - u1temp = ((*rtemp8 & 0xE0) >> 5); - - ReadEFuseByte(Adapter, eFuse_Addr, rtemp8); - - if ((*rtemp8 & 0x0F) == 0x0F) { - eFuse_Addr++; - ReadEFuseByte(Adapter, eFuse_Addr, rtemp8); - - if (*rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) - eFuse_Addr++; - continue; - } else { - offset = ((*rtemp8 & 0xF0) >> 1) | u1temp; - wren = (*rtemp8 & 0x0F); - eFuse_Addr++; - } - } else { - offset = ((*rtemp8 >> 4) & 0x0f); - wren = (*rtemp8 & 0x0f); - } - - if (offset < EFUSE_MAX_SECTION_88E) { - /* Get word enable value from PG header */ - - for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) { - /* Check word enable condition in the section */ - if (!(wren & 0x01)) { - ReadEFuseByte(Adapter, eFuse_Addr, rtemp8); - eFuse_Addr++; - efuse_utilized++; - eFuseWord[offset][i] = (*rtemp8 & 0xff); - if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) - break; - ReadEFuseByte(Adapter, eFuse_Addr, rtemp8); - eFuse_Addr++; - efuse_utilized++; - eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00); - if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E) - break; - } - wren >>= 1; - } - } - - /* Read next PG header */ - ReadEFuseByte(Adapter, eFuse_Addr, rtemp8); - - if (*rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) { - efuse_utilized++; - eFuse_Addr++; - } - } - - /* 3. Collect 16 sections and 4 word unit into Efuse map. */ - for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) { - for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) { - efuseTbl[(i * 8) + (j * 2)] = (eFuseWord[i][j] & 0xff); - efuseTbl[(i * 8) + ((j * 2) + 1)] = ((eFuseWord[i][j] >> 8) & 0xff); - } - } - - /* 4. Copy from Efuse map to output pointer memory!!! */ - for (i = 0; i < _size_byte; i++) - pbuf[i] = efuseTbl[_offset + i]; - -exit: - kfree(efuseTbl); - kfree(eFuseWord); -} - -void rtl8188e_ReadEFuse(struct adapter *Adapter, u16 _size_byte, u8 *pbuf) -{ - int ret = _FAIL; - if (rtw_IOL_applied(Adapter)) { - rtl8188eu_InitPowerOn(Adapter); - - iol_mode_enable(Adapter, 1); - ret = iol_read_efuse(Adapter, _size_byte, pbuf); - iol_mode_enable(Adapter, 0); - - if (_SUCCESS == ret) - return; - } - - Hal_EfuseReadEFuse88E(Adapter, 0, _size_byte, pbuf); -} - -static void dump_chip_info(struct adapter *adapter, struct HAL_VERSION chip_vers) -{ - struct net_device *netdev = adapter->pnetdev; - char *cut = NULL; - char buf[25]; - - switch (chip_vers.CUTVersion) { - case A_CUT_VERSION: - cut = "A_CUT"; - break; - case B_CUT_VERSION: - cut = "B_CUT"; - break; - case C_CUT_VERSION: - cut = "C_CUT"; - break; - case D_CUT_VERSION: - cut = "D_CUT"; - break; - case E_CUT_VERSION: - cut = "E_CUT"; - break; - default: - snprintf(buf, sizeof(buf), "UNKNOWN_CUT(%d)", chip_vers.CUTVersion); - cut = buf; - break; - } - - netdev_dbg(netdev, "Chip Version Info: CHIP_8188E_%s_%s_%s_1T1R_RomVer(%d)\n", - IS_NORMAL_CHIP(chip_vers) ? "Normal_Chip" : "Test_Chip", - IS_CHIP_VENDOR_TSMC(chip_vers) ? "TSMC" : "UMC", - cut, 0); -} - -void rtl8188e_read_chip_version(struct adapter *padapter) -{ - u32 value32; - struct HAL_VERSION ChipVersion; - struct hal_data_8188e *pHalData = &padapter->haldata; - int res; - - res = rtw_read32(padapter, REG_SYS_CFG, &value32); - if (res) - return; - - ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP); - - ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC); - ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK) >> CHIP_VER_RTL_SHIFT; /* IC version (CUT) */ - - dump_chip_info(padapter, ChipVersion); - - pHalData->VersionID = ChipVersion; -} - -void rtl8188e_SetHalODMVar(struct adapter *Adapter, void *pValue1, bool bSet) -{ - struct hal_data_8188e *pHalData = &Adapter->haldata; - struct odm_dm_struct *podmpriv = &pHalData->odmpriv; - struct sta_info *psta = (struct sta_info *)pValue1; - - if (bSet) { - podmpriv->pODM_StaInfo[psta->mac_id] = psta; - ODM_RAInfo_Init(podmpriv, psta->mac_id); - } else { - podmpriv->pODM_StaInfo[psta->mac_id] = NULL; - } -} - -void hal_notch_filter_8188e(struct adapter *adapter, bool enable) -{ - int res; - u8 reg; - - res = rtw_read8(adapter, rOFDM0_RxDSP + 1, ®); - if (res) - return; - - if (enable) - rtw_write8(adapter, rOFDM0_RxDSP + 1, reg | BIT(1)); - else - rtw_write8(adapter, rOFDM0_RxDSP + 1, reg & ~BIT(1)); -} - -/* */ -/* */ -/* LLT R/W/Init function */ -/* */ -/* */ -static s32 _LLTWrite(struct adapter *padapter, u32 address, u32 data) -{ - s32 count; - u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); - u16 LLTReg = REG_LLT_INIT; - int res; - - rtw_write32(padapter, LLTReg, value); - - /* polling */ - for (count = 0; count <= POLLING_LLT_THRESHOLD; count++) { - res = rtw_read32(padapter, LLTReg, &value); - if (res) - continue; - - if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) - break; - } - - return count > POLLING_LLT_THRESHOLD ? _FAIL : _SUCCESS; -} - -s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy) -{ - s32 status = _FAIL; - u32 i; - u32 Last_Entry_Of_TxPktBuf = LAST_ENTRY_OF_TX_PKT_BUFFER;/* 176, 22k */ - - if (rtw_IOL_applied(padapter)) { - status = iol_InitLLTTable(padapter, txpktbuf_bndy); - } else { - for (i = 0; i < (txpktbuf_bndy - 1); i++) { - status = _LLTWrite(padapter, i, i + 1); - if (_SUCCESS != status) - return status; - } - - /* end of list */ - status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF); - if (_SUCCESS != status) - return status; - - /* Make the other pages as ring buffer */ - /* This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer. */ - /* Otherwise used as local loopback buffer. */ - for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) { - status = _LLTWrite(padapter, i, (i + 1)); - if (_SUCCESS != status) - return status; - } - - /* Let last entry point to the start entry of ring buffer */ - status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy); - if (_SUCCESS != status) { - return status; - } - } - - return status; -} - -void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo) -{ - struct eeprom_priv *pEEPROM = &padapter->eeprompriv; - struct net_device *netdev = padapter->pnetdev; - u16 EEPROMId; - - /* Check 0x8129 again for making sure autoload status!! */ - EEPROMId = le16_to_cpu(*((__le16 *)hwinfo)); - if (EEPROMId != RTL_EEPROM_ID) { - pr_err("EEPROM ID(%#x) is invalid!!\n", EEPROMId); - pEEPROM->bautoload_fail_flag = true; - } else { - pEEPROM->bautoload_fail_flag = false; - } - - netdev_dbg(netdev, "EEPROM ID = 0x%04x\n", EEPROMId); -} - -static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G, u8 *PROMContent, bool AutoLoadFail) -{ - u32 rfPath, eeAddr = EEPROM_TX_PWR_INX_88E, group, TxCount = 0; - - memset(pwrInfo24G, 0, sizeof(struct txpowerinfo24g)); - - if (AutoLoadFail) { - for (rfPath = 0; rfPath < RF_PATH_MAX; rfPath++) { - /* 2.4G default value */ - for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { - pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; - pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; - } - for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { - if (TxCount == 0) { - pwrInfo24G->BW20_Diff[rfPath][0] = EEPROM_DEFAULT_24G_HT20_DIFF; - pwrInfo24G->OFDM_Diff[rfPath][0] = EEPROM_DEFAULT_24G_OFDM_DIFF; - } else { - pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - } - } - } - return; - } - - for (rfPath = 0; rfPath < RF_PATH_MAX; rfPath++) { - /* 2.4G default value */ - for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { - pwrInfo24G->IndexCCK_Base[rfPath][group] = PROMContent[eeAddr++]; - if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF) - pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; - } - for (group = 0; group < MAX_CHNL_GROUP_24G - 1; group++) { - pwrInfo24G->IndexBW40_Base[rfPath][group] = PROMContent[eeAddr++]; - if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF) - pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; - } - for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { - if (TxCount == 0) { - pwrInfo24G->BW40_Diff[rfPath][TxCount] = 0; - if (PROMContent[eeAddr] == 0xFF) { - pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF; - } else { - pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4; - if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */ - pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0; - } - - if (PROMContent[eeAddr] == 0xFF) { - pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF; - } else { - pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f); - if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */ - pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0; - } - pwrInfo24G->CCK_Diff[rfPath][TxCount] = 0; - eeAddr++; - } else { - if (PROMContent[eeAddr] == 0xFF) { - pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - } else { - pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4; - if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */ - pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0; - } - - if (PROMContent[eeAddr] == 0xFF) { - pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - } else { - pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f); - if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */ - pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0; - } - eeAddr++; - - if (PROMContent[eeAddr] == 0xFF) { - pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - } else { - pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4; - if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */ - pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0; - } - - if (PROMContent[eeAddr] == 0xFF) { - pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF; - } else { - pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f); - if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */ - pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0; - } - eeAddr++; - } - } - } -} - -static void hal_get_chnl_group_88e(u8 chnl, u8 *group) -{ - if (chnl < 3) /* Channel 1-2 */ - *group = 0; - else if (chnl < 6) /* Channel 3-5 */ - *group = 1; - else if (chnl < 9) /* Channel 6-8 */ - *group = 2; - else if (chnl < 12) /* Channel 9-11 */ - *group = 3; - else if (chnl < 14) /* Channel 12-13 */ - *group = 4; - else if (chnl == 14) /* Channel 14 */ - *group = 5; -} - -void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) -{ - if (AutoLoadFail) - padapter->pwrctrlpriv.bSupportRemoteWakeup = false; - else - /* hw power down mode selection , 0:rf-off / 1:power down */ - - /* decide hw if support remote wakeup function */ - /* if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */ - padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT(1)) ? true : false; -} - -void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool AutoLoadFail) -{ - struct hal_data_8188e *pHalData = &padapter->haldata; - struct txpowerinfo24g pwrInfo24G; - u8 ch, group; - u8 TxCount; - - Hal_ReadPowerValueFromPROM_8188E(&pwrInfo24G, PROMContent, AutoLoadFail); - - for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) { - hal_get_chnl_group_88e(ch, &group); - - pHalData->Index24G_CCK_Base[ch] = pwrInfo24G.IndexCCK_Base[0][group]; - if (ch == 14) - pHalData->Index24G_BW40_Base[ch] = pwrInfo24G.IndexBW40_Base[0][4]; - else - pHalData->Index24G_BW40_Base[ch] = pwrInfo24G.IndexBW40_Base[0][group]; - } - for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) { - pHalData->OFDM_24G_Diff[TxCount] = pwrInfo24G.OFDM_Diff[0][TxCount]; - pHalData->BW20_24G_Diff[TxCount] = pwrInfo24G.BW20_Diff[0][TxCount]; - } - - /* 2010/10/19 MH Add Regulator recognize for CU. */ - if (!AutoLoadFail) { - pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E] & 0x7); /* bit0~2 */ - if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF) - pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION & 0x7); /* bit0~2 */ - } else { - pHalData->EEPROMRegulatory = 0; - } -} - -void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail) -{ - struct hal_data_8188e *pHalData = &pAdapter->haldata; - - if (!AutoLoadFail) { - pHalData->CrystalCap = hwinfo[EEPROM_XTAL_88E]; - if (pHalData->CrystalCap == 0xFF) - pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E; - } else { - pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E; - } -} - -void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail) -{ - padapter->mlmepriv.ChannelPlan = - hal_com_get_channel_plan(padapter, - hwinfo ? hwinfo[EEPROM_ChannelPlan_88E] : 0xFF, - padapter->registrypriv.channel_plan, - RT_CHANNEL_DOMAIN_WORLD_WIDE_13, AutoLoadFail); -} - -void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool AutoLoadFail) -{ - struct hal_data_8188e *pHalData = &pAdapter->haldata; - struct registry_priv *registry_par = &pAdapter->registrypriv; - - if (!AutoLoadFail) { - /* Antenna Diversity setting. */ - if (registry_par->antdiv_cfg == 2) { /* 2:By EFUSE */ - pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E] & 0x18) >> 3; - if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF) - pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION & 0x18) >> 3; - } else { - pHalData->AntDivCfg = registry_par->antdiv_cfg; /* 0:OFF , 1:ON, 2:By EFUSE */ - } - - if (registry_par->antdiv_type == 0) { - /* If TRxAntDivType is AUTO in advanced setting, use EFUSE value instead. */ - pHalData->TRxAntDivType = PROMContent[EEPROM_RF_ANTENNA_OPT_88E]; - if (pHalData->TRxAntDivType == 0xFF) - pHalData->TRxAntDivType = CG_TRX_HW_ANTDIV; /* For 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */ - } else { - pHalData->TRxAntDivType = registry_par->antdiv_type; - } - - if (pHalData->TRxAntDivType == CG_TRX_HW_ANTDIV || pHalData->TRxAntDivType == CGCS_RX_HW_ANTDIV) - pHalData->AntDivCfg = 1; /* 0xC1[3] is ignored. */ - } else { - pHalData->AntDivCfg = 0; - } -} - -void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail) -{ - struct hal_data_8188e *pHalData = &Adapter->haldata; - - /* ThermalMeter from EEPROM */ - if (!AutoloadFail) - pHalData->EEPROMThermalMeter = PROMContent[EEPROM_THERMAL_METER_88E]; - else - pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E; - - if (pHalData->EEPROMThermalMeter == 0xff || AutoloadFail) - pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E; -} |