diff options
Diffstat (limited to 'drivers/staging/wusbcore/host/whci/whci-hc.h')
| -rw-r--r-- | drivers/staging/wusbcore/host/whci/whci-hc.h | 401 |
1 files changed, 0 insertions, 401 deletions
diff --git a/drivers/staging/wusbcore/host/whci/whci-hc.h b/drivers/staging/wusbcore/host/whci/whci-hc.h deleted file mode 100644 index 5a86a57a80cc..000000000000 --- a/drivers/staging/wusbcore/host/whci/whci-hc.h +++ /dev/null @@ -1,401 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) data structures. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef _WHCI_WHCI_HC_H -#define _WHCI_WHCI_HC_H - -#include <linux/list.h> - -/** - * WHCI_PAGE_SIZE - page size use by WHCI - * - * WHCI assumes that host system uses pages of 4096 octets. - */ -#define WHCI_PAGE_SIZE 4096 - - -/** - * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single - * qtd. - * - * This is 2^20 - 1. - */ -#define QTD_MAX_XFER_SIZE 1048575 - - -/** - * struct whc_qtd - Queue Element Transfer Descriptors (qTD) - * - * This describes the data for a bulk, control or interrupt transfer. - * - * [WHCI] section 3.2.4 - */ -struct whc_qtd { - __le32 status; /*< remaining transfer len and transfer status */ - __le32 options; - __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ - __u8 setup[8]; /*< setup data for control transfers */ -} __attribute__((packed)); - -#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ -#define QTD_STS_HALTED (1 << 30) /* transfer halted */ -#define QTD_STS_DBE (1 << 29) /* data buffer error */ -#define QTD_STS_BABBLE (1 << 28) /* babble detected */ -#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ -#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ -#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ -#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ -#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ -#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ -#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) - -#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ -#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ - -/** - * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) - * - * This describes the data and other parameters for an isochronous - * transfer. - * - * [WHCI] section 3.2.5 - */ -struct whc_itd { - __le16 presentation_time; /*< presentation time for OUT transfers */ - __u8 num_segments; /*< number of data segments in segment list */ - __u8 status; /*< command execution status */ - __le32 options; /*< misc transfer options */ - __le64 page_list_ptr; /*< physical pointer to data buffer page list */ - __le64 seg_list_ptr; /*< physical pointer to segment list */ -} __attribute__((packed)); - -#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ -#define ITD_STS_DBE (1 << 5) /* data buffer error */ -#define ITD_STS_BABBLE (1 << 4) /* babble detected */ -#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ - -#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ -#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ - -/** - * Page list entry. - * - * A TD's page list must contain sufficient page list entries for the - * total data length in the TD. - * - * [WHCI] section 3.2.4.3 - */ -struct whc_page_list_entry { - __le64 buf_ptr; /*< physical pointer to buffer */ -} __attribute__((packed)); - -/** - * struct whc_seg_list_entry - Segment list entry. - * - * Describes a portion of the data buffer described in the containing - * qTD's page list. - * - * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr - * + qtd->seg_list_ptr[seg].offset; - * - * Segments can't cross page boundries. - * - * [WHCI] section 3.2.5.5 - */ -struct whc_seg_list_entry { - __le16 len; /*< segment length */ - __u8 idx; /*< index into page list */ - __u8 status; /*< segment status */ - __le16 offset; /*< 12 bit offset into page */ -} __attribute__((packed)); - -/** - * struct whc_qhead - endpoint and status information for a qset. - * - * [WHCI] section 3.2.6 - */ -struct whc_qhead { - __le64 link; /*< next qset in list */ - __le32 info1; - __le32 info2; - __le32 info3; - __le16 status; - __le16 err_count; /*< transaction error count */ - __le32 cur_window; - __le32 scratch[3]; /*< h/w scratch area */ - union { - struct whc_qtd qtd; - struct whc_itd itd; - } overlay; -} __attribute__((packed)); - -#define QH_LINK_PTR_MASK (~0x03Full) -#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) -#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ -#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ -#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ - -#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ -#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ -#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ -#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ -#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ -#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ -#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ -#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ -#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ -#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ -#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ - -#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ -#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ -#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ -#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ -#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ -#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ -#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ -#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ - -#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */ -#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ - -#define QH_STATUS_FLOW_CTRL (1 << 15) -#define QH_STATUS_ICUR(i) ((i) << 5) -#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) -#define QH_STATUS_SEQ_MASK 0x1f - -/** - * usb_pipe_to_qh_type - USB core pipe type to QH transfer type - * - * Returns the QH type field for a USB core pipe type. - */ -static inline unsigned usb_pipe_to_qh_type(unsigned pipe) -{ - static const unsigned type[] = { - [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, - [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, - [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, - [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, - }; - return type[usb_pipetype(pipe)]; -} - -/** - * Maxiumum number of TDs in a qset. - */ -#define WHCI_QSET_TD_MAX 8 - -/** - * struct whc_qset - WUSB data transfers to a specific endpoint - * @qh: the QHead of this qset - * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt - * transfers) - * @itd: up to 8 iTDs (for qsets for isochronous transfers) - * @qset_dma: DMA address for this qset - * @whc: WHCI HC this qset is for - * @ep: endpoint - * @stds: list of sTDs queued to this qset - * @ntds: number of qTDs queued (not necessarily the same as nTDs - * field in the QH) - * @td_start: index of the first qTD in the list - * @td_end: index of next free qTD in the list (provided - * ntds < WHCI_QSET_TD_MAX) - * - * Queue Sets (qsets) are added to the asynchronous schedule list - * (ASL) or the periodic zone list (PZL). - * - * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). - * Each TD may refer to at most 1 MiB of data. If a single transfer - * has > 8MiB of data, TDs can be reused as they are completed since - * the TD list is used as a circular buffer. Similarly, several - * (smaller) transfers may be queued in a qset. - * - * WHCI controllers may cache portions of the qsets in the ASL and - * PZL, requiring the WHCD to inform the WHC that the lists have been - * updated (fields changed or qsets inserted or removed). For safe - * insertion and removal of qsets from the lists the schedule must be - * stopped to avoid races in updating the QH link pointers. - * - * Since the HC is free to execute qsets in any order, all transfers - * to an endpoint should use the same qset to ensure transfers are - * executed in the order they're submitted. - * - * [WHCI] section 3.2.3 - */ -struct whc_qset { - struct whc_qhead qh; - union { - struct whc_qtd qtd[WHCI_QSET_TD_MAX]; - struct whc_itd itd[WHCI_QSET_TD_MAX]; - }; - - /* private data for WHCD */ - dma_addr_t qset_dma; - struct whc *whc; - struct usb_host_endpoint *ep; - struct list_head stds; - int ntds; - int td_start; - int td_end; - struct list_head list_node; - unsigned in_sw_list:1; - unsigned in_hw_list:1; - unsigned remove:1; - unsigned reset:1; - struct urb *pause_after_urb; - struct completion remove_complete; - uint16_t max_packet; - uint8_t max_burst; - uint8_t max_seq; -}; - -static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) -{ - if (target) - *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); - else - *ptr = QH_LINK_T; -} - -/** - * struct di_buf_entry - Device Information (DI) buffer entry. - * - * There's one of these per connected device. - */ -struct di_buf_entry { - __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ - __le32 addr_sec_info; /*< addressing and security info */ - __le32 reserved[7]; -} __attribute__((packed)); - -#define WHC_DI_SECURE (1 << 31) -#define WHC_DI_DISABLE (1 << 30) -#define WHC_DI_KEY_IDX(k) ((k) << 8) -#define WHC_DI_KEY_IDX_MASK 0x0000ff00 -#define WHC_DI_DEV_ADDR(a) ((a) << 0) -#define WHC_DI_DEV_ADDR_MASK 0x000000ff - -/** - * struct dn_buf_entry - Device Notification (DN) buffer entry. - * - * [WHCI] section 3.2.8 - */ -struct dn_buf_entry { - __u8 msg_size; /*< number of octets of valid DN data */ - __u8 reserved1; - __u8 src_addr; /*< source address */ - __u8 status; /*< buffer entry status */ - __le32 tkid; /*< TKID for source device, valid if secure bit is set */ - __u8 dn_data[56]; /*< up to 56 octets of DN data */ -} __attribute__((packed)); - -#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ -#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ - -#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) - -/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of - data. [WHCI] section 2.4.7. */ -#define WHC_GEN_CMD_DATA_LEN 256 - -/* - * HC registers. - * - * [WHCI] section 2.4 - */ - -#define WHCIVERSION 0x00 - -#define WHCSPARAMS 0x04 -# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) -# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) -# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) - -#define WUSBCMD 0x08 -# define WUSBCMD_BCID(b) ((b) << 16) -# define WUSBCMD_BCID_MASK (0xff << 16) -# define WUSBCMD_ASYNC_QSET_RM (1 << 12) -# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) -# define WUSBCMD_WUSBSI(s) ((s) << 8) -# define WUSBCMD_WUSBSI_MASK (0x7 << 8) -# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) -# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) -# define WUSBCMD_ASYNC_UPDATED (1 << 5) -# define WUSBCMD_PERIODIC_UPDATED (1 << 4) -# define WUSBCMD_ASYNC_EN (1 << 3) -# define WUSBCMD_PERIODIC_EN (1 << 2) -# define WUSBCMD_WHCRESET (1 << 1) -# define WUSBCMD_RUN (1 << 0) - -#define WUSBSTS 0x0c -# define WUSBSTS_ASYNC_SCHED (1 << 15) -# define WUSBSTS_PERIODIC_SCHED (1 << 14) -# define WUSBSTS_DNTS_SCHED (1 << 13) -# define WUSBSTS_HCHALTED (1 << 12) -# define WUSBSTS_GEN_CMD_DONE (1 << 9) -# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBSTS_DNTS_OVERFLOW (1 << 7) -# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBSTS_HOST_ERR (1 << 5) -# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBSTS_DNTS_INT (1 << 2) -# define WUSBSTS_ERR_INT (1 << 1) -# define WUSBSTS_INT (1 << 0) -# define WUSBSTS_INT_MASK 0x3ff - -#define WUSBINTR 0x10 -# define WUSBINTR_GEN_CMD_DONE (1 << 9) -# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBINTR_DNTS_OVERFLOW (1 << 7) -# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBINTR_HOST_ERR (1 << 5) -# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBINTR_DNTS_INT (1 << 2) -# define WUSBINTR_ERR_INT (1 << 1) -# define WUSBINTR_INT (1 << 0) -# define WUSBINTR_ALL 0x3ff - -#define WUSBGENCMDSTS 0x14 -# define WUSBGENCMDSTS_ACTIVE (1 << 31) -# define WUSBGENCMDSTS_ERROR (1 << 24) -# define WUSBGENCMDSTS_IOC (1 << 23) -# define WUSBGENCMDSTS_MMCIE_ADD 0x01 -# define WUSBGENCMDSTS_MMCIE_RM 0x02 -# define WUSBGENCMDSTS_SET_MAS 0x03 -# define WUSBGENCMDSTS_CHAN_STOP 0x04 -# define WUSBGENCMDSTS_RWP_EN 0x05 - -#define WUSBGENCMDPARAMS 0x18 -#define WUSBGENADDR 0x20 -#define WUSBASYNCLISTADDR 0x28 -#define WUSBDNTSBUFADDR 0x30 -#define WUSBDEVICEINFOADDR 0x38 - -#define WUSBSETSECKEYCMD 0x40 -# define WUSBSETSECKEYCMD_SET (1 << 31) -# define WUSBSETSECKEYCMD_ERASE (1 << 30) -# define WUSBSETSECKEYCMD_GTK (1 << 8) -# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) - -#define WUSBTKID 0x44 -#define WUSBSECKEY 0x48 -#define WUSBPERIODICLISTBASE 0x58 -#define WUSBMASINDEX 0x60 - -#define WUSBDNTSCTRL 0x64 -# define WUSBDNTSCTRL_ACTIVE (1 << 31) -# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) -# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) - -#define WUSBTIME 0x68 -# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff - -#define WUSBBPST 0x6c -#define WUSBDIBUPDATED 0x70 - -#endif /* #ifndef _WHCI_WHCI_HC_H */ |