diff options
Diffstat (limited to 'drivers/thermal/qcom/Kconfig')
| -rw-r--r-- | drivers/thermal/qcom/Kconfig | 37 |
1 files changed, 35 insertions, 2 deletions
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig index be32e5abce3c..a6bb01082ec6 100644 --- a/drivers/thermal/qcom/Kconfig +++ b/drivers/thermal/qcom/Kconfig @@ -1,7 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only config QCOM_TSENS tristate "Qualcomm TSENS Temperature Alarm" - depends on THERMAL - depends on QCOM_QFPROM + depends on NVMEM_QCOM_QFPROM depends on ARCH_QCOM || COMPILE_TEST help This enables the thermal sysfs driver for the TSENS device. It shows @@ -9,3 +9,36 @@ config QCOM_TSENS thermal zone device via the mode file results in disabling the sensor. Also able to set threshold temperature for both hot and cold and update when a threshold is reached. + +config QCOM_SPMI_ADC_TM5 + tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5" + depends on OF && SPMI && IIO + select REGMAP_SPMI + select QCOM_VADC_COMMON + help + This enables the thermal driver for the ADC thermal monitoring + device. It shows up as a thermal zone with multiple trip points. + Thermal client sets threshold temperature for both warm and cool and + gets updated when a threshold is reached. + +config QCOM_SPMI_TEMP_ALARM + tristate "Qualcomm SPMI PMIC Temperature Alarm" + depends on OF && SPMI && IIO + select REGMAP_SPMI + help + This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) + PMIC devices. It shows up in sysfs as a thermal sensor with multiple + trip points. The temperature reported by the thermal sensor reflects the + real time die temperature if an ADC is present or an estimate of the + temperature based upon the over temperature stage value. + +config QCOM_LMH + tristate "Qualcomm Limits Management Hardware" + depends on ARCH_QCOM || COMPILE_TEST + select QCOM_SCM + help + This enables initialization of Qualcomm limits management + hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on + input from temperature and current sensors. On many newer Qualcomm SoCs + LMh is configured in the firmware and this feature need not be enabled. + However, on certain SoCs like sdm845 LMh has to be configured from kernel. |