diff options
Diffstat (limited to 'drivers/thermal/qcom/tsens.h')
| -rw-r--r-- | drivers/thermal/qcom/tsens.h | 80 |
1 files changed, 73 insertions, 7 deletions
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 59d01162c66a..2a7afa4c899b 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -6,16 +6,22 @@ #ifndef __QCOM_TSENS_H__ #define __QCOM_TSENS_H__ +#define NO_PT_CALIB 0x0 #define ONE_PT_CALIB 0x1 #define ONE_PT_CALIB2 0x2 #define TWO_PT_CALIB 0x3 +#define ONE_PT_CALIB2_NO_OFFSET 0x6 +#define TWO_PT_CALIB_NO_OFFSET 0x7 #define CAL_DEGC_PT1 30 #define CAL_DEGC_PT2 120 #define SLOPE_FACTOR 1000 #define SLOPE_DEFAULT 3200 +#define TIMEOUT_US 100 #define THRESHOLD_MAX_ADC_CODE 0x3ff #define THRESHOLD_MIN_ADC_CODE 0x0 +#define MAX_SENSORS 16 + #include <linux/interrupt.h> #include <linux/thermal.h> #include <linux/regmap.h> @@ -25,9 +31,12 @@ struct tsens_priv; /* IP version numbers in ascending order */ enum tsens_ver { - VER_0_1 = 0, + VER_0 = 0, + VER_0_1, VER_1_X, + VER_1_X_NO_RPM, VER_2_X, + VER_2_X_NO_RPM, }; enum tsens_irq_type { @@ -52,6 +61,8 @@ struct tsens_sensor { unsigned int hw_id; int slope; u32 status; + int p1_calib_offset; + int p2_calib_offset; }; /** @@ -63,7 +74,6 @@ struct tsens_sensor { * @disable: Function to disable the tsens device * @suspend: Function to suspend the tsens device * @resume: Function to resume the tsens device - * @get_trend: Function to get the thermal/temp trend */ struct tsens_ops { /* mandatory callbacks */ @@ -75,7 +85,6 @@ struct tsens_ops { void (*disable)(struct tsens_priv *priv); int (*suspend)(struct tsens_priv *priv); int (*resume)(struct tsens_priv *priv); - int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend); }; #define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \ @@ -161,6 +170,7 @@ enum regfield_ids { TSENS_SW_RST, SENSOR_EN, CODE_OR_TEMP, + MAIN_MEASURE_PERIOD, /* ----- TM ------ */ /* TRDY */ @@ -493,19 +503,25 @@ enum regfield_ids { * struct tsens_features - Features supported by the IP * @ver_major: Major number of IP version * @crit_int: does the IP support critical interrupts? + * @combo_int: does the IP use one IRQ for up, low and critical thresholds? * @adc: do the sensors only output adc code (instead of temperature)? * @srot_split: does the IP neatly splits the register space into SROT and TM, * with SROT only being available to secure boot firmware? * @has_watchdog: does this IP support watchdog functionality? * @max_sensors: maximum sensors supported by this version of the IP + * @trip_min_temp: minimum trip temperature supported by this version of the IP + * @trip_max_temp: maximum trip temperature supported by this version of the IP */ struct tsens_features { unsigned int ver_major; unsigned int crit_int:1; + unsigned int combo_int:1; unsigned int adc:1; unsigned int srot_split:1; unsigned int has_watchdog:1; unsigned int max_sensors; + int trip_min_temp; + int trip_max_temp; }; /** @@ -572,25 +588,75 @@ struct tsens_priv { struct dentry *debug_root; struct dentry *debug; - struct tsens_sensor sensor[]; + struct tsens_sensor sensor[] __counted_by(num_sensors); +}; + +/** + * struct tsens_single_value - internal representation of a single field inside nvmem calibration data + * @idx: index into the u32 data array + * @shift: the shift of the first bit in the value + * @blob: index of the data blob to use for this cell + */ +struct tsens_single_value { + u8 idx; + u8 shift; + u8 blob; +}; + +/** + * struct tsens_legacy_calibration_format - description of calibration data used when parsing the legacy nvmem blob + * @base_len: the length of the base fields inside calibration data + * @base_shift: the shift to be applied to base data + * @sp_len: the length of the sN_pM fields inside calibration data + * @mode: descriptor of the calibration mode field + * @invalid: descriptor of the calibration mode invalid field + * @base: descriptors of the base0 and base1 fields + * @sp: descriptors of the sN_pM fields + */ +struct tsens_legacy_calibration_format { + unsigned int base_len; + unsigned int base_shift; + unsigned int sp_len; + /* just two bits */ + struct tsens_single_value mode; + /* on all platforms except 8974 invalid is the third bit of what downstream calls 'mode' */ + struct tsens_single_value invalid; + struct tsens_single_value base[2]; + struct tsens_single_value sp[][2]; }; char *qfprom_read(struct device *dev, const char *cname); +int tsens_read_calibration_legacy(struct tsens_priv *priv, + const struct tsens_legacy_calibration_format *format, + u32 *p1, u32 *p2, + u32 *cdata, u32 *csel); +int tsens_read_calibration(struct tsens_priv *priv, int shift, u32 *p1, u32 *p2, bool backup); +int tsens_calibrate_nvmem(struct tsens_priv *priv, int shift); +int tsens_calibrate_common(struct tsens_priv *priv); void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode); int init_common(struct tsens_priv *priv); int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp); int get_temp_common(const struct tsens_sensor *s, int *temp); +#ifdef CONFIG_SUSPEND +int tsens_resume_common(struct tsens_priv *priv); +#else +#define tsens_resume_common NULL +#endif /* TSENS target */ extern struct tsens_plat_data data_8960; /* TSENS v0.1 targets */ -extern struct tsens_plat_data data_8916, data_8974; +extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607; /* TSENS v1 targets */ -extern struct tsens_plat_data data_tsens_v1, data_8976; +extern struct tsens_plat_data data_tsens_v1, data_8937, data_8976, data_8956; + +/* TSENS v1 with no RPM targets */ +extern const struct tsens_plat_data data_ipq5018; /* TSENS v2 targets */ -extern struct tsens_plat_data data_8996, data_tsens_v2; +extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2; +extern const struct tsens_plat_data data_ipq5332, data_ipq5424; #endif /* __QCOM_TSENS_H__ */ |