diff options
Diffstat (limited to 'drivers/thermal/sun8i_thermal.c')
| -rw-r--r-- | drivers/thermal/sun8i_thermal.c | 736 |
1 files changed, 736 insertions, 0 deletions
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c new file mode 100644 index 000000000000..22674790629a --- /dev/null +++ b/drivers/thermal/sun8i_thermal.c @@ -0,0 +1,736 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Thermal sensor driver for Allwinner SOC + * Copyright (C) 2019 Yangtao Li + * + * Based on the work of Icenowy Zheng <icenowy@aosc.io> + * Based on the work of Ondrej Jirman <megous@megous.com> + * Based on the work of Josef Gajdusek <atx@atx.name> + */ + +#include <linux/bitmap.h> +#include <linux/cleanup.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +#include "thermal_hwmon.h" + +#define MAX_SENSOR_NUM 4 + +#define FT_TEMP_MASK GENMASK(11, 0) +#define TEMP_CALIB_MASK GENMASK(11, 0) +#define CALIBRATE_DEFAULT 0x800 + +#define SUN8I_THS_CTRL0 0x00 +#define SUN8I_THS_CTRL2 0x40 +#define SUN8I_THS_IC 0x44 +#define SUN8I_THS_IS 0x48 +#define SUN8I_THS_MFC 0x70 +#define SUN8I_THS_TEMP_CALIB 0x74 +#define SUN8I_THS_TEMP_DATA 0x80 + +#define SUN50I_THS_CTRL0 0x00 +#define SUN50I_H6_THS_ENABLE 0x04 +#define SUN50I_H6_THS_PC 0x08 +#define SUN50I_H6_THS_DIC 0x10 +#define SUN50I_H6_THS_DIS 0x20 +#define SUN50I_H6_THS_MFC 0x30 +#define SUN50I_H6_THS_TEMP_CALIB 0xa0 +#define SUN50I_H6_THS_TEMP_DATA 0xc0 + +#define SUN8I_THS_CTRL0_T_ACQ0(x) (GENMASK(15, 0) & (x)) +#define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16) +#define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8) + +#define SUN50I_THS_CTRL0_T_ACQ(x) (GENMASK(15, 0) & ((x) - 1)) +#define SUN50I_THS_CTRL0_T_SAMPLE_PER(x) ((GENMASK(15, 0) & ((x) - 1)) << 16) +#define SUN50I_THS_FILTER_EN BIT(2) +#define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x)) +#define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12) +#define SUN50I_H6_THS_DATA_IRQ_STS(x) BIT(x) + +struct tsensor { + struct ths_device *tmdev; + struct thermal_zone_device *tzd; + int id; +}; + +struct ths_thermal_chip { + bool has_mod_clk; + bool has_bus_clk_reset; + bool needs_sram; + int sensor_num; + int offset; + int scale; + int ft_deviation; + int temp_data_base; + int (*calibrate)(struct ths_device *tmdev, + u16 *caldata, int callen); + int (*init)(struct ths_device *tmdev); + unsigned long (*irq_ack)(struct ths_device *tmdev); + int (*calc_temp)(struct ths_device *tmdev, + int id, int reg); +}; + +struct ths_device { + const struct ths_thermal_chip *chip; + struct device *dev; + struct regmap *regmap; + struct regmap_field *sram_regmap_field; + struct reset_control *reset; + struct clk *bus_clk; + struct clk *mod_clk; + struct tsensor sensor[MAX_SENSOR_NUM]; +}; + +/* The H616 needs to have a bit 16 in the SRAM control register cleared. */ +static const struct reg_field sun8i_ths_sram_reg_field = REG_FIELD(0x0, 16, 16); + +/* Temp Unit: millidegree Celsius */ +static int sun8i_ths_calc_temp(struct ths_device *tmdev, + int id, int reg) +{ + return tmdev->chip->offset - (reg * tmdev->chip->scale / 10); +} + +static int sun50i_h5_calc_temp(struct ths_device *tmdev, + int id, int reg) +{ + if (reg >= 0x500) + return -1191 * reg / 10 + 223000; + else if (!id) + return -1452 * reg / 10 + 259000; + else + return -1590 * reg / 10 + 276000; +} + +static int sun8i_ths_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct tsensor *s = thermal_zone_device_priv(tz); + struct ths_device *tmdev = s->tmdev; + int val = 0; + + regmap_read(tmdev->regmap, tmdev->chip->temp_data_base + + 0x4 * s->id, &val); + + /* ths have no data yet */ + if (!val) + return -EAGAIN; + + *temp = tmdev->chip->calc_temp(tmdev, s->id, val); + /* + * According to the original sdk, there are some platforms(rarely) + * that add a fixed offset value after calculating the temperature + * value. We can't simply put it on the formula for calculating the + * temperature above, because the formula for calculating the + * temperature above is also used when the sensor is calibrated. If + * do this, the correct calibration formula is hard to know. + */ + *temp += tmdev->chip->ft_deviation; + + return 0; +} + +static const struct thermal_zone_device_ops ths_ops = { + .get_temp = sun8i_ths_get_temp, +}; + +static const struct regmap_config config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, + .max_register = 0xfc, +}; + +static unsigned long sun8i_h3_irq_ack(struct ths_device *tmdev) +{ + unsigned long irq_bitmap = 0; + int i, state; + + regmap_read(tmdev->regmap, SUN8I_THS_IS, &state); + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + if (state & SUN8I_THS_DATA_IRQ_STS(i)) { + regmap_write(tmdev->regmap, SUN8I_THS_IS, + SUN8I_THS_DATA_IRQ_STS(i)); + bitmap_set(&irq_bitmap, i, 1); + } + } + + return irq_bitmap; +} + +static unsigned long sun50i_h6_irq_ack(struct ths_device *tmdev) +{ + unsigned long irq_bitmap = 0; + int i, state; + + regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state); + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) { + regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS, + SUN50I_H6_THS_DATA_IRQ_STS(i)); + bitmap_set(&irq_bitmap, i, 1); + } + } + + return irq_bitmap; +} + +static irqreturn_t sun8i_irq_thread(int irq, void *data) +{ + struct ths_device *tmdev = data; + unsigned long irq_bitmap = tmdev->chip->irq_ack(tmdev); + int i; + + for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) { + /* We allow some zones to not register. */ + if (IS_ERR(tmdev->sensor[i].tzd)) + continue; + thermal_zone_device_update(tmdev->sensor[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } + + return IRQ_HANDLED; +} + +static int sun8i_h3_ths_calibrate(struct ths_device *tmdev, + u16 *caldata, int callen) +{ + int i; + + if (!caldata[0] || callen < 2 * tmdev->chip->sensor_num) + return -EINVAL; + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + int offset = (i % 2) << 4; + + regmap_update_bits(tmdev->regmap, + SUN8I_THS_TEMP_CALIB + (4 * (i >> 1)), + TEMP_CALIB_MASK << offset, + caldata[i] << offset); + } + + return 0; +} + +static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, + u16 *caldata, int callen) +{ + struct device *dev = tmdev->dev; + int i, ft_temp; + + if (!caldata[0]) + return -EINVAL; + + /* + * efuse layout: + * + * 0 11 16 27 32 43 48 57 + * +----------+-----------+-----------+-----------+ + * | temp | |sensor0| |sensor1| |sensor2| | + * +----------+-----------+-----------+-----------+ + * ^ ^ ^ + * | | | + * | | sensor3[11:8] + * | sensor3[7:4] + * sensor3[3:0] + * + * The calibration data on the H6 is the ambient temperature and + * sensor values that are filled during the factory test stage. + * + * The unit of stored FT temperature is 0.1 degree celsius. + * + * We need to calculate a delta between measured and caluclated + * register values and this will become a calibration offset. + */ + ft_temp = (caldata[0] & FT_TEMP_MASK) * 100; + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + int sensor_reg, sensor_temp, cdata, offset; + + if (i == 3) + sensor_reg = (caldata[1] >> 12) + | ((caldata[2] >> 12) << 4) + | ((caldata[3] >> 12) << 8); + else + sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; + + sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); + + /* + * Calibration data is CALIBRATE_DEFAULT - (calculated + * temperature from sensor reading at factory temperature + * minus actual factory temperature) * 14.88 (scale from + * temperature to register values) + */ + cdata = CALIBRATE_DEFAULT - + ((sensor_temp - ft_temp) * 10 / tmdev->chip->scale); + if (cdata & ~TEMP_CALIB_MASK) { + /* + * Calibration value more than 12-bit, but calibration + * register is 12-bit. In this case, ths hardware can + * still work without calibration, although the data + * won't be so accurate. + */ + dev_warn(dev, "sensor%d is not calibrated.\n", i); + continue; + } + + offset = (i % 2) * 16; + regmap_update_bits(tmdev->regmap, + SUN50I_H6_THS_TEMP_CALIB + (i / 2 * 4), + TEMP_CALIB_MASK << offset, + cdata << offset); + } + + return 0; +} + +static int sun8i_ths_calibrate(struct ths_device *tmdev) +{ + struct nvmem_cell *calcell; + struct device *dev = tmdev->dev; + u16 *caldata; + size_t callen; + int ret = 0; + + calcell = nvmem_cell_get(dev, "calibration"); + if (IS_ERR(calcell)) { + if (PTR_ERR(calcell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + /* + * Even if the external calibration data stored in sid is + * not accessible, the THS hardware can still work, although + * the data won't be so accurate. + * + * The default value of calibration register is 0x800 for + * every sensor, and the calibration value is usually 0x7xx + * or 0x8xx, so they won't be away from the default value + * for a lot. + * + * So here we do not return error if the calibration data is + * not available, except the probe needs deferring. + */ + goto out; + } + + caldata = nvmem_cell_read(calcell, &callen); + if (IS_ERR(caldata)) { + ret = PTR_ERR(caldata); + goto out; + } + + tmdev->chip->calibrate(tmdev, caldata, callen); + + kfree(caldata); +out: + if (!IS_ERR(calcell)) + nvmem_cell_put(calcell); + return ret; +} + +static void sun8i_ths_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + +static struct regmap *sun8i_ths_get_sram_regmap(struct device_node *node) +{ + struct platform_device *sram_pdev; + struct regmap *regmap = NULL; + + struct device_node *sram_node __free(device_node) = + of_parse_phandle(node, "allwinner,sram", 0); + if (!sram_node) + return ERR_PTR(-ENODEV); + + sram_pdev = of_find_device_by_node(sram_node); + if (!sram_pdev) { + /* platform device might not be probed yet */ + return ERR_PTR(-EPROBE_DEFER); + } + + /* If no regmap is found then the other device driver is at fault */ + regmap = dev_get_regmap(&sram_pdev->dev, NULL); + if (!regmap) + regmap = ERR_PTR(-EINVAL); + + platform_device_put(sram_pdev); + + return regmap; +} + +static int sun8i_ths_resource_init(struct ths_device *tmdev) +{ + struct device *dev = tmdev->dev; + struct platform_device *pdev = to_platform_device(dev); + void __iomem *base; + int ret; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + tmdev->regmap = devm_regmap_init_mmio(dev, base, &config); + if (IS_ERR(tmdev->regmap)) + return PTR_ERR(tmdev->regmap); + + if (tmdev->chip->has_bus_clk_reset) { + tmdev->reset = devm_reset_control_get(dev, NULL); + if (IS_ERR(tmdev->reset)) + return PTR_ERR(tmdev->reset); + + ret = reset_control_deassert(tmdev->reset); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, sun8i_ths_reset_control_assert, + tmdev->reset); + if (ret) + return ret; + + tmdev->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus"); + if (IS_ERR(tmdev->bus_clk)) + return PTR_ERR(tmdev->bus_clk); + } + + if (tmdev->chip->has_mod_clk) { + tmdev->mod_clk = devm_clk_get_enabled(&pdev->dev, "mod"); + if (IS_ERR(tmdev->mod_clk)) + return PTR_ERR(tmdev->mod_clk); + } + + ret = clk_set_rate(tmdev->mod_clk, 24000000); + if (ret) + return ret; + + if (tmdev->chip->needs_sram) { + struct regmap *regmap; + + regmap = sun8i_ths_get_sram_regmap(dev->of_node); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + tmdev->sram_regmap_field = devm_regmap_field_alloc(dev, + regmap, + sun8i_ths_sram_reg_field); + if (IS_ERR(tmdev->sram_regmap_field)) + return PTR_ERR(tmdev->sram_regmap_field); + } + + ret = sun8i_ths_calibrate(tmdev); + if (ret) + return ret; + + return 0; +} + +static int sun8i_h3_thermal_init(struct ths_device *tmdev) +{ + int val; + + /* average over 4 samples */ + regmap_write(tmdev->regmap, SUN8I_THS_MFC, + SUN50I_THS_FILTER_EN | + SUN50I_THS_FILTER_TYPE(1)); + /* + * clkin = 24MHz + * filter_samples = 4 + * period = 0.25s + * + * x = period * clkin / 4096 / filter_samples - 1 + * = 365 + */ + val = GENMASK(7 + tmdev->chip->sensor_num, 8); + regmap_write(tmdev->regmap, SUN8I_THS_IC, + SUN50I_H6_THS_PC_TEMP_PERIOD(365) | val); + /* + * T_acq = 20us + * clkin = 24MHz + * + * x = T_acq * clkin - 1 + * = 479 + */ + regmap_write(tmdev->regmap, SUN8I_THS_CTRL0, + SUN8I_THS_CTRL0_T_ACQ0(479)); + val = GENMASK(tmdev->chip->sensor_num - 1, 0); + regmap_write(tmdev->regmap, SUN8I_THS_CTRL2, + SUN8I_THS_CTRL2_T_ACQ1(479) | val); + + return 0; +} + +static int sun50i_h6_thermal_init(struct ths_device *tmdev) +{ + int val; + + /* The H616 needs to have a bit in the SRAM control register cleared. */ + if (tmdev->sram_regmap_field) + regmap_field_write(tmdev->sram_regmap_field, 0); + + /* + * The manual recommends an overall sample frequency of 50 KHz (20us, + * 480 cycles at 24 MHz), which provides plenty of time for both the + * acquisition time (>24 cycles) and the actual conversion time + * (>14 cycles). + * The lower half of the CTRL register holds the "acquire time", in + * clock cycles, which the manual recommends to be 2us: + * 24MHz * 2us = 48 cycles. + * The high half of THS_CTRL encodes the sample frequency, in clock + * cycles: 24MHz * 20us = 480 cycles. + * This is explained in the H616 manual, but apparently wrongly + * described in the H6 manual, although the BSP code does the same + * for both SoCs. + */ + regmap_write(tmdev->regmap, SUN50I_THS_CTRL0, + SUN50I_THS_CTRL0_T_ACQ(48) | + SUN50I_THS_CTRL0_T_SAMPLE_PER(480)); + /* average over 4 samples */ + regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC, + SUN50I_THS_FILTER_EN | + SUN50I_THS_FILTER_TYPE(1)); + /* + * clkin = 24MHz + * filter_samples = 4 + * period = 0.25s + * + * x = period * clkin / 4096 / filter_samples - 1 + * = 365 + */ + regmap_write(tmdev->regmap, SUN50I_H6_THS_PC, + SUN50I_H6_THS_PC_TEMP_PERIOD(365)); + /* enable sensor */ + val = GENMASK(tmdev->chip->sensor_num - 1, 0); + regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val); + /* thermal data interrupt enable */ + val = GENMASK(tmdev->chip->sensor_num - 1, 0); + regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val); + + return 0; +} + +static int sun8i_ths_register(struct ths_device *tmdev) +{ + int i; + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + tmdev->sensor[i].tmdev = tmdev; + tmdev->sensor[i].id = i; + tmdev->sensor[i].tzd = + devm_thermal_of_zone_register(tmdev->dev, + i, + &tmdev->sensor[i], + &ths_ops); + + /* + * If an individual zone fails to register for reasons + * other than probe deferral (eg, a bad DT) then carry + * on, other zones might register successfully. + */ + if (IS_ERR(tmdev->sensor[i].tzd)) { + if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER) + return PTR_ERR(tmdev->sensor[i].tzd); + continue; + } + + devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd); + } + + return 0; +} + +static int sun8i_ths_probe(struct platform_device *pdev) +{ + struct ths_device *tmdev; + struct device *dev = &pdev->dev; + int ret, irq; + + tmdev = devm_kzalloc(dev, sizeof(*tmdev), GFP_KERNEL); + if (!tmdev) + return -ENOMEM; + + tmdev->dev = dev; + tmdev->chip = of_device_get_match_data(&pdev->dev); + if (!tmdev->chip) + return -EINVAL; + + ret = sun8i_ths_resource_init(tmdev); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = tmdev->chip->init(tmdev); + if (ret) + return ret; + + ret = sun8i_ths_register(tmdev); + if (ret) + return ret; + + /* + * Avoid entering the interrupt handler, the thermal device is not + * registered yet, we deffer the registration of the interrupt to + * the end. + */ + ret = devm_request_threaded_irq(dev, irq, NULL, + sun8i_irq_thread, + IRQF_ONESHOT, "ths", tmdev); + if (ret) + return ret; + + return 0; +} + +static const struct ths_thermal_chip sun8i_a83t_ths = { + .sensor_num = 3, + .scale = 705, + .offset = 191668, + .temp_data_base = SUN8I_THS_TEMP_DATA, + .calibrate = sun8i_h3_ths_calibrate, + .init = sun8i_h3_thermal_init, + .irq_ack = sun8i_h3_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun8i_h3_ths = { + .sensor_num = 1, + .scale = 1211, + .offset = 217000, + .has_mod_clk = true, + .has_bus_clk_reset = true, + .temp_data_base = SUN8I_THS_TEMP_DATA, + .calibrate = sun8i_h3_ths_calibrate, + .init = sun8i_h3_thermal_init, + .irq_ack = sun8i_h3_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun8i_r40_ths = { + .sensor_num = 2, + .offset = 251086, + .scale = 1130, + .has_mod_clk = true, + .has_bus_clk_reset = true, + .temp_data_base = SUN8I_THS_TEMP_DATA, + .calibrate = sun8i_h3_ths_calibrate, + .init = sun8i_h3_thermal_init, + .irq_ack = sun8i_h3_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun50i_a64_ths = { + .sensor_num = 3, + .offset = 260890, + .scale = 1170, + .has_mod_clk = true, + .has_bus_clk_reset = true, + .temp_data_base = SUN8I_THS_TEMP_DATA, + .calibrate = sun8i_h3_ths_calibrate, + .init = sun8i_h3_thermal_init, + .irq_ack = sun8i_h3_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun50i_a100_ths = { + .sensor_num = 3, + .has_bus_clk_reset = true, + .ft_deviation = 8000, + .offset = 187744, + .scale = 672, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, + .init = sun50i_h6_thermal_init, + .irq_ack = sun50i_h6_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun50i_h5_ths = { + .sensor_num = 2, + .has_mod_clk = true, + .has_bus_clk_reset = true, + .temp_data_base = SUN8I_THS_TEMP_DATA, + .calibrate = sun8i_h3_ths_calibrate, + .init = sun8i_h3_thermal_init, + .irq_ack = sun8i_h3_irq_ack, + .calc_temp = sun50i_h5_calc_temp, +}; + +static const struct ths_thermal_chip sun50i_h6_ths = { + .sensor_num = 2, + .has_bus_clk_reset = true, + .ft_deviation = 7000, + .offset = 187744, + .scale = 672, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, + .init = sun50i_h6_thermal_init, + .irq_ack = sun50i_h6_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun20i_d1_ths = { + .sensor_num = 1, + .has_bus_clk_reset = true, + .offset = 188552, + .scale = 673, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, + .init = sun50i_h6_thermal_init, + .irq_ack = sun50i_h6_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct ths_thermal_chip sun50i_h616_ths = { + .sensor_num = 4, + .has_bus_clk_reset = true, + .needs_sram = true, + .ft_deviation = 8000, + .offset = 263655, + .scale = 810, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, + .init = sun50i_h6_thermal_init, + .irq_ack = sun50i_h6_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + +static const struct of_device_id of_ths_match[] = { + { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, + { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, + { .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths }, + { .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths }, + { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths }, + { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, + { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, + { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, + { .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, of_ths_match); + +static struct platform_driver ths_driver = { + .probe = sun8i_ths_probe, + .driver = { + .name = "sun8i-thermal", + .of_match_table = of_ths_match, + }, +}; +module_platform_driver(ths_driver); + +MODULE_DESCRIPTION("Thermal sensor driver for Allwinner SOC"); +MODULE_LICENSE("GPL v2"); |