diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_lpss.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_lpss.c | 75 |
1 files changed, 53 insertions, 22 deletions
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 4dee8a9e0c95..776ec1ef29d6 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -70,7 +70,7 @@ static inline struct lpss8250 *to_lpss8250(struct dw8250_port_data *data) } static void byt_set_termios(struct uart_port *p, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); struct lpss8250 *lpss = to_lpss8250(p->private_data); @@ -100,11 +100,7 @@ static void byt_set_termios(struct uart_port *p, struct ktermios *termios, reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; writel(reg, p->membase + BYT_PRV_CLK); - p->status &= ~UPSTAT_AUTOCTS; - if (termios->c_cflag & CRTSCTS) - p->status |= UPSTAT_AUTOCTS; - - serial8250_do_set_termios(p, termios, old); + dw8250_do_set_termios(p, termios, old); } static unsigned int byt_get_mctrl(struct uart_port *port) @@ -121,8 +117,7 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) { struct dw_dma_slave *param = &lpss->dma_param; struct pci_dev *pdev = to_pci_dev(port->dev); - unsigned int dma_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); - struct pci_dev *dma_dev = pci_get_slot(pdev->bus, dma_devfn); + struct pci_dev *dma_dev; switch (pdev->device) { case PCI_DEVICE_ID_INTEL_BYT_UART1: @@ -141,6 +136,8 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) return -EINVAL; } + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + param->dma_dev = &dma_dev->dev; param->m_master = 0; param->p_master = 1; @@ -156,11 +153,41 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) return 0; } +static void byt_serial_exit(struct lpss8250 *lpss) +{ + struct dw_dma_slave *param = &lpss->dma_param; + + /* Paired with pci_get_slot() in the byt_serial_setup() above */ + put_device(param->dma_dev); +} + static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) { + struct uart_8250_dma *dma = &lpss->data.dma; + struct uart_8250_port *up = up_to_u8250p(port); + + /* + * This simply makes the checks in the 8250_port to try the DMA + * channel request which in turn uses the magic of ACPI tables + * parsing (see drivers/dma/acpi-dma.c for the details) and + * matching with the registered General Purpose DMA controllers. + */ + up->dma = dma; + + lpss->dma_maxburst = 16; + + port->set_termios = dw8250_do_set_termios; + return 0; } +static void ehl_serial_exit(struct lpss8250 *lpss) +{ + struct uart_8250_port *up = serial8250_get_port(lpss->data.line); + + up->dma = NULL; +} + #ifdef CONFIG_SERIAL_8250_DMA static const struct dw_dma_platform_data qrk_serial_dma_pdata = { .nr_channels = 2, @@ -252,28 +279,32 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port struct dw_dma_slave *rx_param, *tx_param; struct device *dev = port->port.dev; - if (!lpss->dma_param.dma_dev) + if (!lpss->dma_param.dma_dev) { + dma = port->dma; + if (dma) + goto out_configuration_only; + return 0; + } - rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + rx_param = devm_kmemdup(dev, &lpss->dma_param, sizeof(*rx_param), GFP_KERNEL); if (!rx_param) return -ENOMEM; - tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + tx_param = devm_kmemdup(dev, &lpss->dma_param, sizeof(*tx_param), GFP_KERNEL); if (!tx_param) return -ENOMEM; - *rx_param = lpss->dma_param; - dma->rxconf.src_maxburst = lpss->dma_maxburst; - - *tx_param = lpss->dma_param; - dma->txconf.dst_maxburst = lpss->dma_maxburst; - dma->fn = lpss8250_dma_filter; dma->rx_param = rx_param; dma->tx_param = tx_param; port->dma = dma; + +out_configuration_only: + dma->rxconf.src_maxburst = lpss->dma_maxburst; + dma->txconf.dst_maxburst = lpss->dma_maxburst; + return 0; } @@ -305,7 +336,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) uart.port.irq = pci_irq_vector(pdev, 0); uart.port.private_data = &lpss->data; uart.port.type = PORT_16550A; - uart.port.iotype = UPIO_MEM; + uart.port.iotype = UPIO_MEM32; uart.port.regshift = 2; uart.port.uartclk = lpss->board->base_baud * 16; uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE; @@ -335,8 +366,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; err_exit: - if (lpss->board->exit) - lpss->board->exit(lpss); + lpss->board->exit(lpss); pci_free_irq_vectors(pdev); return ret; } @@ -347,8 +377,7 @@ static void lpss8250_remove(struct pci_dev *pdev) serial8250_unregister_port(lpss->data.line); - if (lpss->board->exit) - lpss->board->exit(lpss); + lpss->board->exit(lpss); pci_free_irq_vectors(pdev); } @@ -356,12 +385,14 @@ static const struct lpss8250_board byt_board = { .freq = 100000000, .base_baud = 2764800, .setup = byt_serial_setup, + .exit = byt_serial_exit, }; static const struct lpss8250_board ehl_board = { .freq = 200000000, .base_baud = 12500000, .setup = ehl_serial_setup, + .exit = ehl_serial_exit, }; static const struct lpss8250_board qrk_board = { |