diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_mid.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_mid.c | 66 |
1 files changed, 34 insertions, 32 deletions
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c index efa0515139f8..8ec03863606e 100644 --- a/drivers/tty/serial/8250/8250_mid.c +++ b/drivers/tty/serial/8250/8250_mid.c @@ -12,7 +12,6 @@ #include <linux/rational.h> #include <linux/dma/hsu.h> -#include <linux/8250_pci.h> #include "8250.h" @@ -32,9 +31,9 @@ struct mid8250; struct mid8250_board { - unsigned int flags; unsigned long freq; unsigned int base_baud; + unsigned int bar; int (*setup)(struct mid8250 *, struct uart_port *p); void (*exit)(struct mid8250 *); }; @@ -73,6 +72,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p) return 0; } +static void pnw_exit(struct mid8250 *mid) +{ + pci_dev_put(mid->dma_dev); +} + static int tng_handle_irq(struct uart_port *p) { struct mid8250 *mid = p->private_data; @@ -124,6 +128,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p) return 0; } +static void tng_exit(struct mid8250 *mid) +{ + pci_dev_put(mid->dma_dev); +} + static int dnv_handle_irq(struct uart_port *p) { struct mid8250 *mid = p->private_data; @@ -159,7 +168,6 @@ static int dnv_setup(struct mid8250 *mid, struct uart_port *p) { struct hsu_dma_chip *chip = &mid->dma_chip; struct pci_dev *pdev = to_pci_dev(p->dev); - unsigned int bar = FL_GET_BASE(mid->board->flags); int ret; pci_set_master(pdev); @@ -173,7 +181,7 @@ static int dnv_setup(struct mid8250 *mid, struct uart_port *p) chip->dev = &pdev->dev; chip->irq = pci_irq_vector(pdev, 0); chip->regs = p->membase; - chip->length = pci_resource_len(pdev, bar); + chip->length = pci_resource_len(pdev, mid->board->bar); chip->offset = DNV_DMA_CHAN_OFFSET; /* Falling back to PIO mode if DMA probing fails */ @@ -196,9 +204,8 @@ static void dnv_exit(struct mid8250 *mid) /*****************************************************************************/ -static void mid8250_set_termios(struct uart_port *p, - struct ktermios *termios, - struct ktermios *old) +static void mid8250_set_termios(struct uart_port *p, struct ktermios *termios, + const struct ktermios *old) { unsigned int baud = tty_termios_baud_rate(termios); struct mid8250 *mid = p->private_data; @@ -282,7 +289,6 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct uart_8250_port uart; struct mid8250 *mid; - unsigned int bar; int ret; ret = pcim_enable_device(pdev); @@ -294,7 +300,6 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) return -ENOMEM; mid->board = (struct mid8250_board *)id->driver_data; - bar = FL_GET_BASE(mid->board->flags); memset(&uart, 0, sizeof(struct uart_8250_port)); @@ -307,16 +312,14 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE; uart.port.set_termios = mid8250_set_termios; - uart.port.mapbase = pci_resource_start(pdev, bar); - uart.port.membase = pcim_iomap(pdev, bar, 0); + uart.port.mapbase = pci_resource_start(pdev, mid->board->bar); + uart.port.membase = pcim_iomap(pdev, mid->board->bar, 0); if (!uart.port.membase) return -ENOMEM; - if (mid->board->setup) { - ret = mid->board->setup(mid, &uart.port); - if (ret) - return ret; - } + ret = mid->board->setup(mid, &uart.port); + if (ret) + return ret; ret = mid8250_dma_setup(mid, &uart); if (ret) @@ -330,9 +333,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, mid); return 0; + err: - if (mid->board->exit) - mid->board->exit(mid); + mid->board->exit(mid); return ret; } @@ -342,42 +345,41 @@ static void mid8250_remove(struct pci_dev *pdev) serial8250_unregister_port(mid->line); - if (mid->board->exit) - mid->board->exit(mid); + mid->board->exit(mid); } static const struct mid8250_board pnw_board = { - .flags = FL_BASE0, .freq = 50000000, .base_baud = 115200, + .bar = 0, .setup = pnw_setup, + .exit = pnw_exit, }; static const struct mid8250_board tng_board = { - .flags = FL_BASE0, .freq = 38400000, .base_baud = 1843200, + .bar = 0, .setup = tng_setup, + .exit = tng_exit, }; static const struct mid8250_board dnv_board = { - .flags = FL_BASE1, .freq = 133333333, .base_baud = 115200, + .bar = 1, .setup = dnv_setup, .exit = dnv_exit, }; -#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board } - static const struct pci_device_id pci_ids[] = { - MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_CDF_UART, dnv_board), - MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board), - { }, + { PCI_DEVICE_DATA(INTEL, PNW_UART1, &pnw_board) }, + { PCI_DEVICE_DATA(INTEL, PNW_UART2, &pnw_board) }, + { PCI_DEVICE_DATA(INTEL, PNW_UART3, &pnw_board) }, + { PCI_DEVICE_DATA(INTEL, TNG_UART, &tng_board) }, + { PCI_DEVICE_DATA(INTEL, CDF_UART, &dnv_board) }, + { PCI_DEVICE_DATA(INTEL, DNV_UART, &dnv_board) }, + { } }; MODULE_DEVICE_TABLE(pci, pci_ids); |