diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_omap.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 587 |
1 files changed, 341 insertions, 246 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 734f092ef839..9e49ef48b851 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -8,6 +8,7 @@ * */ +#include <linux/atomic.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/io.h> @@ -18,8 +19,6 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/of.h> -#include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/delay.h> #include <linux/pm_runtime.h> @@ -28,10 +27,13 @@ #include <linux/pm_wakeirq.h> #include <linux/dma-mapping.h> #include <linux/sys_soc.h> +#include <linux/reboot.h> +#include <linux/pinctrl/consumer.h> #include "8250.h" #define DEFAULT_CLK_SPEED 48000000 +#define OMAP_UART_REGSHIFT 2 #define UART_ERRATA_i202_MDR1_ACCESS (1 << 0) #define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1) @@ -114,7 +116,12 @@ /* RX FIFO occupancy indicator */ #define UART_OMAP_RX_LVL 0x19 +/* Timeout low and High */ +#define UART_OMAP_TO_L 0x26 +#define UART_OMAP_TO_H 0x27 + struct omap8250_priv { + void __iomem *membase; int line; u8 habit; u8 mdr1; @@ -129,9 +136,9 @@ struct omap8250_priv { u8 tx_trigger; u8 rx_trigger; + atomic_t active; bool is_suspending; int wakeirq; - int wakeups_enabled; u32 latency; u32 calc_latency; struct pm_qos_request pm_qos_request; @@ -140,6 +147,9 @@ struct omap8250_priv { spinlock_t rx_dma_lock; bool rx_dma_broken; bool throttled; + + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_wakeup; }; struct omap8250_dma_params { @@ -159,9 +169,9 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p); static inline void omap_8250_rx_dma_flush(struct uart_8250_port *p) { } #endif -static u32 uart_read(struct uart_8250_port *up, u32 reg) +static u32 uart_read(struct omap8250_priv *priv, u32 reg) { - return readl(up->port.membase + (reg << up->port.regshift)); + return readl(priv->membase + (reg << OMAP_UART_REGSHIFT)); } /* @@ -171,7 +181,7 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg) static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_8250_port *up = up_to_u8250p(port); - struct omap8250_priv *priv = up->port.private_data; + struct omap8250_priv *priv = port->private_data; u8 lcr; serial8250_do_set_mctrl(port, mctrl); @@ -298,10 +308,14 @@ static void omap8250_update_mdr1(struct uart_8250_port *up, static void omap8250_restore_regs(struct uart_8250_port *up) { - struct omap8250_priv *priv = up->port.private_data; + struct uart_port *port = &up->port; + struct omap8250_priv *priv = port->private_data; struct uart_8250_dma *dma = up->dma; u8 mcr = serial8250_in_MCR(up); + /* Port locked to synchronize UART_IER access against the console. */ + lockdep_assert_held_once(&port->lock); + if (dma && dma->tx_running) { /* * TCSANOW requests the change to occur immediately however if @@ -351,27 +365,21 @@ static void omap8250_restore_regs(struct uart_8250_port *up) omap8250_update_mdr1(up, priv); - __omap8250_set_mctrl(&up->port, up->port.mctrl); + __omap8250_set_mctrl(port, port->mctrl); serial_out(up, UART_OMAP_MDR3, priv->mdr3); - if (up->port.rs485.flags & SER_RS485_ENABLED && - up->port.rs485_config == serial8250_em485_config) - serial8250_em485_stop_tx(up); + if (port->rs485.flags & SER_RS485_ENABLED && + port->rs485_config == serial8250_em485_config) + serial8250_em485_stop_tx(up, true); } -/* - * OMAP can use "CLK / (16 or 13) / div" for baud rate. And then we have have - * some differences in how we want to handle flow control. - */ -static void omap_8250_set_termios(struct uart_port *port, - struct ktermios *termios, - const struct ktermios *old) +static void omap_8250_set_termios_atomic(struct uart_port *port, struct ktermios *termios, + const struct ktermios *old, unsigned int baud) { struct uart_8250_port *up = up_to_u8250p(port); - struct omap8250_priv *priv = up->port.private_data; - unsigned char cval = 0; - unsigned int baud; + struct omap8250_priv *priv = port->private_data; + u8 cval; cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); @@ -384,59 +392,59 @@ static void omap_8250_set_termios(struct uart_port *port, if (termios->c_cflag & CMSPAR) cval |= UART_LCR_SPAR; - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / UART_DIV_MAX, - port->uartclk / 13); omap_8250_get_divisor(port, baud, priv); /* * Ok, we're now changing the port state. Do it with * interrupts disabled. */ - pm_runtime_get_sync(port->dev); - spin_lock_irq(&port->lock); + guard(serial8250_rpm)(up); + guard(uart_port_lock_irq)(port); /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + /* + * Specify which conditions may be considered for error + * handling and the ignoring of characters. The actual + * ignoring of characters only occurs if the bit is set + * in @ignore_status_mask as well. + */ + port->read_status_mask = UART_LSR_OE | UART_LSR_DR; if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (termios->c_iflag & (IGNBRK | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; + port->read_status_mask |= UART_LSR_BI; /* * Characters to ignore */ - up->port.ignore_status_mask = 0; + port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; + port->ignore_status_mask |= UART_LSR_BI; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; + port->ignore_status_mask |= UART_LSR_OE; } /* * ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; + port->ignore_status_mask |= UART_LSR_DR; /* * Modem status interrupts */ up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + if (UART_ENABLE_MS(port, termios->c_cflag)) up->ier |= UART_IER_MSI; up->lcr = cval; @@ -474,15 +482,15 @@ static void omap_8250_set_termios(struct uart_port *port, priv->xoff = termios->c_cc[VSTOP]; priv->efr = 0; - up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW && + if (termios->c_cflag & CRTSCTS && port->flags & UPF_HARD_FLOW && !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) && !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ - up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; - } else if (up->port.flags & UPF_SOFT_FLOW) { + } else if (port->flags & UPF_SOFT_FLOW) { /* * OMAP rx s/w flow control is borked; the transmitter remains * stuck off even if rx flow control is subsequently disabled @@ -494,15 +502,32 @@ static void omap_8250_set_termios(struct uart_port *port, * Transmit XON1, XOFF1 */ if (termios->c_iflag & IXOFF) { - up->port.status |= UPSTAT_AUTOXOFF; + port->status |= UPSTAT_AUTOXOFF; priv->efr |= OMAP_UART_SW_TX; } } omap8250_restore_regs(up); +} - spin_unlock_irq(&up->port.lock); - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); +/* + * OMAP can use "CLK / (16 or 13) / div" for baud rate. And then we have have + * some differences in how we want to handle flow control. + */ +static void omap_8250_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) +{ + struct omap8250_priv *priv = port->private_data; + unsigned int baud; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / UART_DIV_MAX, + port->uartclk / 13); + + omap_8250_set_termios_atomic(port, termios, old, baud); /* calculate wakeup latency constraint */ priv->calc_latency = USEC_PER_SEC * 64 * 8 / baud; @@ -522,7 +547,10 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state, struct uart_8250_port *up = up_to_u8250p(port); u8 efr; - pm_runtime_get_sync(port->dev); + guard(serial8250_rpm)(up); + /* Synchronize UART_IER access against the console. */ + guard(uart_port_lock_irq)(port); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); efr = serial_in(up, UART_EFR); serial_out(up, UART_EFR, efr | UART_EFR_ECB); @@ -532,9 +560,6 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); } static void omap_serial_fill_features_erratas(struct uart_8250_port *up, @@ -548,7 +573,7 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up, u32 mvr, scheme; u16 revision, major, minor; - mvr = uart_read(up, UART_OMAP_MVER); + mvr = uart_read(priv, UART_OMAP_MVER); /* Check revision register scheme */ scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT; @@ -616,40 +641,63 @@ static int omap_8250_dma_handle_irq(struct uart_port *port); static irqreturn_t omap8250_irq(int irq, void *dev_id) { - struct uart_port *port = dev_id; - struct omap8250_priv *priv = port->private_data; - struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = dev_id; + struct uart_8250_port *up = serial8250_get_port(priv->line); + struct uart_port *port = &up->port; unsigned int iir, lsr; int ret; + pm_runtime_get_noresume(port->dev); + + /* Shallow idle state wake-up to an IO interrupt? */ + if (atomic_add_unless(&priv->active, 1, 1)) { + priv->latency = priv->calc_latency; + schedule_work(&priv->qos_work); + } + #ifdef CONFIG_SERIAL_8250_DMA if (up->dma) { ret = omap_8250_dma_handle_irq(port); + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put(port->dev); return IRQ_RETVAL(ret); } #endif - serial8250_rpm_get(up); lsr = serial_port_in(port, UART_LSR); iir = serial_port_in(port, UART_IIR); ret = serial8250_handle_irq(port, iir); /* * On K3 SoCs, it is observed that RX TIMEOUT is signalled after - * FIFO has been drained, in which case a dummy read of RX FIFO - * is required to clear RX TIMEOUT condition. + * FIFO has been drained or erroneously. + * So apply solution of Errata i2310 as mentioned in + * https://www.ti.com/lit/pdf/sprz536 */ if (priv->habit & UART_RX_TIMEOUT_QUIRK && (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && serial_port_in(port, UART_OMAP_RX_LVL) == 0) { - serial_port_in(port, UART_RX); + unsigned char efr2, timeout_h, timeout_l; + + efr2 = serial_in(up, UART_OMAP_EFR2); + timeout_h = serial_in(up, UART_OMAP_TO_H); + timeout_l = serial_in(up, UART_OMAP_TO_L); + serial_out(up, UART_OMAP_TO_H, 0xFF); + serial_out(up, UART_OMAP_TO_L, 0xFF); + serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE); + serial_in(up, UART_IIR); + serial_out(up, UART_OMAP_EFR2, efr2); + serial_out(up, UART_OMAP_TO_H, timeout_h); + serial_out(up, UART_OMAP_TO_L, timeout_l); } /* Stop processing interrupts on input overrun */ if ((lsr & UART_LSR_OE) && up->overrun_backoff_time_ms > 0) { unsigned long delay; - up->ier = port->serial_in(port, UART_IER); + /* Synchronize UART_IER access against the console. */ + uart_port_lock(port); + up->ier = serial_port_in(port, UART_IER); if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) { port->ops->stop_rx(port); } else { @@ -658,12 +706,14 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id) */ cancel_delayed_work(&up->overrun_backoff); } + uart_port_unlock(port); delay = msecs_to_jiffies(up->overrun_backoff_time_ms); schedule_delayed_work(&up->overrun_backoff, delay); } - serial8250_rpm_put(up); + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put(port->dev); return IRQ_RETVAL(ret); } @@ -672,6 +722,7 @@ static int omap_8250_startup(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = port->private_data; + struct uart_8250_dma *dma = &priv->omap8250_dma; int ret; if (priv->wakeirq) { @@ -680,7 +731,11 @@ static int omap_8250_startup(struct uart_port *port) return ret; } - pm_runtime_get_sync(port->dev); +#ifdef CONFIG_PM + up->capabilities |= UART_CAP_RPM; +#endif + + guard(serial8250_rpm)(up); serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); @@ -690,29 +745,23 @@ static int omap_8250_startup(struct uart_port *port) up->msr_saved_flags = 0; /* Disable DMA for console UART */ - if (uart_console(port)) - up->dma = NULL; - - if (up->dma) { + if (dma->fn && !uart_console(port)) { + up->dma = &priv->omap8250_dma; ret = serial8250_request_dma(up); if (ret) { dev_warn_ratelimited(port->dev, "failed to request DMA\n"); up->dma = NULL; } + } else { + up->dma = NULL; } - ret = request_irq(port->irq, omap8250_irq, IRQF_SHARED, - dev_name(port->dev), port); - if (ret < 0) - goto err; - - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_out(up, UART_IER, up->ier); - -#ifdef CONFIG_PM - up->capabilities |= UART_CAP_RPM; -#endif + /* Synchronize UART_IER access against the console. */ + scoped_guard(uart_port_lock_irq, port) { + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + } /* Enable module level wake up */ priv->wer = OMAP_UART_WER_MOD_WKUP; @@ -720,17 +769,14 @@ static int omap_8250_startup(struct uart_port *port) priv->wer |= OMAP_UART_TX_WAKEUP_EN; serial_out(up, UART_OMAP_WER, priv->wer); - if (up->dma && !(priv->habit & UART_HAS_EFR2)) + if (up->dma && !(priv->habit & UART_HAS_EFR2)) { + guard(uart_port_lock_irq)(port); up->dma->rx_dma(up); + } + + enable_irq(port->irq); - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); return 0; -err: - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); - dev_pm_clear_wake_irq(port->dev); - return ret; } static void omap_8250_shutdown(struct uart_port *port) @@ -738,21 +784,27 @@ static void omap_8250_shutdown(struct uart_port *port) struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = port->private_data; + guard(serial8250_rpm)(up); + flush_work(&priv->qos_work); if (up->dma) omap_8250_rx_dma_flush(up); - pm_runtime_get_sync(port->dev); - serial_out(up, UART_OMAP_WER, 0); if (priv->habit & UART_HAS_EFR2) serial_out(up, UART_OMAP_EFR2, 0x0); - up->ier = 0; - serial_out(up, UART_IER, 0); + /* Synchronize UART_IER access against the console. */ + scoped_guard(uart_port_lock_irq, port) { + up->ier = 0; + serial_out(up, UART_IER, 0); + } - if (up->dma) - serial8250_release_dma(up); + disable_irq_nosync(port->irq); + dev_pm_clear_wake_irq(port->dev); + + serial8250_release_dma(up); + up->dma = NULL; /* * Disable break condition and FIFOs @@ -760,48 +812,33 @@ static void omap_8250_shutdown(struct uart_port *port) if (up->lcr & UART_LCR_SBC) serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC); serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); - free_irq(port->irq, port); - dev_pm_clear_wake_irq(port->dev); } static void omap_8250_throttle(struct uart_port *port) { struct omap8250_priv *priv = port->private_data; - unsigned long flags; - pm_runtime_get_sync(port->dev); + guard(serial8250_rpm)(up_to_u8250p(port)); + guard(uart_port_lock_irqsave)(port); - spin_lock_irqsave(&port->lock, flags); port->ops->stop_rx(port); priv->throttled = true; - spin_unlock_irqrestore(&port->lock, flags); - - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); } static void omap_8250_unthrottle(struct uart_port *port) { struct omap8250_priv *priv = port->private_data; struct uart_8250_port *up = up_to_u8250p(port); - unsigned long flags; - pm_runtime_get_sync(port->dev); + guard(serial8250_rpm)(up); + /* Synchronize UART_IER access against the console. */ + guard(uart_port_lock_irqsave)(port); - spin_lock_irqsave(&port->lock, flags); priv->throttled = false; if (up->dma) up->dma->rx_dma(up); up->ier |= UART_IER_RLSI | UART_IER_RDI; - port->read_status_mask |= UART_LSR_DR; serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&port->lock, flags); - - pm_runtime_mark_last_busy(port->dev); - pm_runtime_put_autosuspend(port->dev); } static int omap8250_rs485_config(struct uart_port *port, @@ -898,7 +935,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p) if (priv->habit & UART_HAS_RHR_IT_DIS) { reg = serial_in(p, UART_OMAP_IER2); reg &= ~UART_OMAP_IER2_RHR_IT_DIS; - serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS); + serial_out(p, UART_OMAP_IER2, reg); } dmaengine_tx_status(rxchan, cookie, &state); @@ -939,29 +976,26 @@ static void __dma_rx_complete(void *param) struct omap8250_priv *priv = p->port.private_data; struct uart_8250_dma *dma = p->dma; struct dma_tx_state state; - unsigned long flags; - spin_lock_irqsave(&p->port.lock, flags); + /* Synchronize UART_IER access against the console. */ + guard(uart_port_lock_irqsave)(&p->port); /* * If the tx status is not DMA_COMPLETE, then this is a delayed * completion callback. A previous RX timeout flush would have * already pushed the data, so exit. */ - if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) != - DMA_COMPLETE) { - spin_unlock_irqrestore(&p->port.lock, flags); + if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) != DMA_COMPLETE) return; - } + __dma_rx_do_complete(p); - if (!priv->throttled) { - p->ier |= UART_IER_RLSI | UART_IER_RDI; - serial_out(p, UART_IER, p->ier); - if (!(priv->habit & UART_HAS_EFR2)) - omap_8250_rx_dma(p); - } + if (priv->throttled) + return; - spin_unlock_irqrestore(&p->port.lock, flags); + p->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_out(p, UART_IER, p->ier); + if (!(priv->habit & UART_HAS_EFR2)) + omap_8250_rx_dma(p); } static void omap_8250_rx_dma_flush(struct uart_8250_port *p) @@ -998,6 +1032,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p) unsigned long flags; u32 reg; + /* Port locked to synchronize UART_IER access against the console. */ + lockdep_assert_held_once(&p->port.lock); + if (priv->rx_dma_broken) return -EINVAL; @@ -1040,7 +1077,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p) if (priv->habit & UART_HAS_RHR_IT_DIS) { reg = serial_in(p, UART_OMAP_IER2); reg |= UART_OMAP_IER2_RHR_IT_DIS; - serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS); + serial_out(p, UART_OMAP_IER2, reg); } dma_async_issue_pending(dma->rxchan); @@ -1055,15 +1092,14 @@ static void omap_8250_dma_tx_complete(void *param) { struct uart_8250_port *p = param; struct uart_8250_dma *dma = p->dma; - struct circ_buf *xmit = &p->port.state->xmit; - unsigned long flags; + struct tty_port *tport = &p->port.state->port; bool en_thri = false; struct omap8250_priv *priv = p->port.private_data; dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); - spin_lock_irqsave(&p->port.lock, flags); + guard(uart_port_lock_irqsave)(&p->port); dma->tx_running = 0; @@ -1074,10 +1110,10 @@ static void omap_8250_dma_tx_complete(void *param) omap8250_restore_regs(p); } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(&p->port); - if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) { + if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(&p->port)) { int ret; ret = omap_8250_tx_dma(p); @@ -1091,22 +1127,21 @@ static void omap_8250_dma_tx_complete(void *param) dma->tx_err = 1; serial8250_set_THRI(p); } - - spin_unlock_irqrestore(&p->port.lock, flags); } static int omap_8250_tx_dma(struct uart_8250_port *p) { struct uart_8250_dma *dma = p->dma; struct omap8250_priv *priv = p->port.private_data; - struct circ_buf *xmit = &p->port.state->xmit; + struct tty_port *tport = &p->port.state->port; struct dma_async_tx_descriptor *desc; - unsigned int skip_byte = 0; + struct scatterlist sg; + int skip_byte = -1; int ret; if (dma->tx_running) return 0; - if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + if (uart_tx_stopped(&p->port) || kfifo_is_empty(&tport->xmit_fifo)) { /* * Even if no data, we need to return an error for the two cases @@ -1121,8 +1156,8 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) return 0; } - dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); if (priv->habit & OMAP_DMA_TX_KICK) { + unsigned char c; u8 tx_lvl; /* @@ -1145,22 +1180,32 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) ret = -EBUSY; goto err; } - if (dma->tx_size < 4) { + if (kfifo_len(&tport->xmit_fifo) < 4) { ret = -EINVAL; goto err; } - skip_byte = 1; + if (!uart_fifo_out(&p->port, &c, 1)) { + ret = -EINVAL; + goto err; + } + skip_byte = c; + } + + sg_init_table(&sg, 1); + ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1, UART_XMIT_SIZE, dma->tx_addr); + if (ret != 1) { + ret = -EINVAL; + goto err; } - desc = dmaengine_prep_slave_single(dma->txchan, - dma->tx_addr + xmit->tail + skip_byte, - dma->tx_size - skip_byte, DMA_MEM_TO_DEV, + desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { ret = -EBUSY; goto err; } + dma->tx_size = sg_dma_len(&sg); dma->tx_running = 1; desc->callback = omap_8250_dma_tx_complete; @@ -1176,11 +1221,13 @@ static int omap_8250_tx_dma(struct uart_8250_port *p) dma->tx_err = 0; serial8250_clear_THRI(p); - if (skip_byte) - serial_out(p, UART_TX, xmit->buf[xmit->tail]); - return 0; + ret = 0; + goto out_skip; err: dma->tx_err = 1; +out_skip: + if (skip_byte >= 0) + serial_out(p, UART_TX, skip_byte); return ret; } @@ -1212,6 +1259,9 @@ static u16 omap_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, u16 status static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, u16 status) { + /* Port locked to synchronize UART_IER access against the console. */ + lockdep_assert_held_once(&up->port.lock); + /* * Queue a new transfer if FIFO has data. */ @@ -1237,42 +1287,41 @@ static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, /* * This is mostly serial8250_handle_irq(). We have a slightly different DMA - * hoook for RX/TX and need different logic for them in the ISR. Therefore we + * hook for RX/TX and need different logic for them in the ISR. Therefore we * use the default routine in the non-DMA case and this one for with DMA. */ static int omap_8250_dma_handle_irq(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); - struct omap8250_priv *priv = up->port.private_data; + struct omap8250_priv *priv = port->private_data; u16 status; u8 iir; - serial8250_rpm_get(up); - iir = serial_port_in(port, UART_IIR); if (iir & UART_IIR_NO_INT) { - serial8250_rpm_put(up); return IRQ_HANDLED; } - spin_lock(&port->lock); + uart_port_lock(port); status = serial_port_in(port, UART_LSR); - if (priv->habit & UART_HAS_EFR2) - am654_8250_handle_rx_dma(up, iir, status); - else - status = omap_8250_handle_rx_dma(up, iir, status); + if ((iir & 0x3f) != UART_IIR_THRI) { + if (priv->habit & UART_HAS_EFR2) + am654_8250_handle_rx_dma(up, iir, status); + else + status = omap_8250_handle_rx_dma(up, iir, status); + } serial8250_modem_status(up); if (status & UART_LSR_THRE && up->dma->tx_err) { - if (uart_tx_stopped(&up->port) || - uart_circ_empty(&up->port.state->xmit)) { + if (uart_tx_stopped(port) || + kfifo_is_empty(&port->state->port.xmit_fifo)) { up->dma->tx_err = 0; serial8250_tx_chars(up); } else { /* - * try again due to an earlier failer which + * try again due to an earlier failure which * might have been resolved by now. */ if (omap_8250_tx_dma(up)) @@ -1282,7 +1331,6 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) uart_unlock_and_check_sysrq(port); - serial8250_rpm_put(up); return 1; } @@ -1306,6 +1354,18 @@ static int omap8250_no_handle_irq(struct uart_port *port) return 0; } +static int omap8250_select_wakeup_pinctrl(struct device *dev, + struct omap8250_priv *priv) +{ + if (IS_ERR_OR_NULL(priv->pinctrl_wakeup)) + return 0; + + if (!device_may_wakeup(dev)) + return 0; + + return pinctrl_select_state(priv->pinctrl, priv->pinctrl_wakeup); +} + static struct omap8250_dma_params am654_dma = { .rx_size = SZ_2K, .rx_trigger = 1, @@ -1354,11 +1414,7 @@ static int omap8250_probe(struct platform_device *pdev) struct uart_8250_port up; struct resource *regs; void __iomem *membase; - int irq, ret; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; + int ret; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { @@ -1379,7 +1435,6 @@ static int omap8250_probe(struct platform_device *pdev) up.port.dev = &pdev->dev; up.port.mapbase = regs->start; up.port.membase = membase; - up.port.irq = irq; /* * It claims to be 16C750 compatible however it is a little different. * It has EFR and has no FCR7_64byte bit. The AFE (which it claims to @@ -1389,13 +1444,9 @@ static int omap8250_probe(struct platform_device *pdev) * or pm callback. */ up.port.type = PORT_8250; - up.port.iotype = UPIO_MEM; - up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | - UPF_HARD_FLOW; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | UPF_HARD_FLOW; up.port.private_data = priv; - up.port.regshift = 2; - up.port.fifosize = 64; up.tx_loadsz = 64; up.capabilities = UART_CAP_FIFO; #ifdef CONFIG_PM @@ -1421,14 +1472,14 @@ static int omap8250_probe(struct platform_device *pdev) up.rs485_stop_tx = serial8250_em485_stop_tx; up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias\n"); + ret = uart_read_port_properties(&up.port); + if (ret) return ret; - } - up.port.line = ret; - if (of_property_read_u32(np, "clock-frequency", &up.port.uartclk)) { + up.port.regshift = OMAP_UART_REGSHIFT; + up.port.fifosize = 64; + + if (!up.port.uartclk) { struct clk *clk; clk = devm_clk_get(&pdev->dev, NULL); @@ -1444,8 +1495,6 @@ static int omap8250_probe(struct platform_device *pdev) &up.overrun_backoff_time_ms) != 0) up.overrun_backoff_time_ms = 0; - priv->wakeirq = irq_of_parse_and_map(np, 1); - pdata = of_device_get_match_data(&pdev->dev); if (pdata) priv->habit |= pdata->habit; @@ -1457,6 +1506,8 @@ static int omap8250_probe(struct platform_device *pdev) DEFAULT_CLK_SPEED); } + priv->membase = membase; + priv->line = -ENODEV; priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; priv->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; cpu_latency_qos_add_request(&priv->pm_qos_request, priv->latency); @@ -1464,7 +1515,12 @@ static int omap8250_probe(struct platform_device *pdev) spin_lock_init(&priv->rx_dma_lock); - device_init_wakeup(&pdev->dev, true); + platform_set_drvdata(pdev, priv); + + device_set_wakeup_capable(&pdev->dev, true); + if (of_property_read_bool(np, "wakeup-source")) + device_set_wakeup_enable(&pdev->dev, true); + pm_runtime_enable(&pdev->dev); pm_runtime_use_autosuspend(&pdev->dev); @@ -1478,8 +1534,6 @@ static int omap8250_probe(struct platform_device *pdev) if (!of_get_available_child_count(pdev->dev.of_node)) pm_runtime_set_autosuspend_delay(&pdev->dev, -1); - pm_runtime_irq_safe(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); omap_serial_fill_features_erratas(&up, priv); @@ -1498,64 +1552,81 @@ static int omap8250_probe(struct platform_device *pdev) ret = of_property_count_strings(np, "dma-names"); if (ret == 2) { struct omap8250_dma_params *dma_params = NULL; + struct uart_8250_dma *dma = &priv->omap8250_dma; - up.dma = &priv->omap8250_dma; - up.dma->fn = the_no_dma_filter_fn; - up.dma->tx_dma = omap_8250_tx_dma; - up.dma->rx_dma = omap_8250_rx_dma; + dma->fn = the_no_dma_filter_fn; + dma->tx_dma = omap_8250_tx_dma; + dma->rx_dma = omap_8250_rx_dma; if (pdata) dma_params = pdata->dma_params; if (dma_params) { - up.dma->rx_size = dma_params->rx_size; - up.dma->rxconf.src_maxburst = dma_params->rx_trigger; - up.dma->txconf.dst_maxburst = dma_params->tx_trigger; + dma->rx_size = dma_params->rx_size; + dma->rxconf.src_maxburst = dma_params->rx_trigger; + dma->txconf.dst_maxburst = dma_params->tx_trigger; priv->rx_trigger = dma_params->rx_trigger; priv->tx_trigger = dma_params->tx_trigger; } else { - up.dma->rx_size = RX_TRIGGER; - up.dma->rxconf.src_maxburst = RX_TRIGGER; - up.dma->txconf.dst_maxburst = TX_TRIGGER; + dma->rx_size = RX_TRIGGER; + dma->rxconf.src_maxburst = RX_TRIGGER; + dma->txconf.dst_maxburst = TX_TRIGGER; } } #endif + + irq_set_status_flags(up.port.irq, IRQ_NOAUTOEN); + ret = devm_request_irq(&pdev->dev, up.port.irq, omap8250_irq, 0, + dev_name(&pdev->dev), priv); + if (ret < 0) + goto err; + + priv->wakeirq = irq_of_parse_and_map(np, 1); + ret = serial8250_register_8250_port(&up); if (ret < 0) { dev_err(&pdev->dev, "unable to register 8250 port\n"); goto err; } priv->line = ret; - platform_set_drvdata(pdev, priv); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); + + priv->pinctrl = devm_pinctrl_get(&pdev->dev); + if (!IS_ERR_OR_NULL(priv->pinctrl)) + priv->pinctrl_wakeup = pinctrl_lookup_state(priv->pinctrl, "wakeup"); + return 0; err: pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); + cpu_latency_qos_remove_request(&priv->pm_qos_request); return ret; } -static int omap8250_remove(struct platform_device *pdev) +static void omap8250_remove(struct platform_device *pdev) { struct omap8250_priv *priv = platform_get_drvdata(pdev); + struct uart_8250_port *up; int err; err = pm_runtime_resume_and_get(&pdev->dev); if (err) - return err; + dev_err(&pdev->dev, "Failed to resume hardware\n"); + up = serial8250_get_port(priv->line); + omap_8250_shutdown(&up->port); + serial8250_unregister_port(priv->line); + priv->line = -ENODEV; pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); flush_work(&priv->qos_work); pm_runtime_disable(&pdev->dev); - serial8250_unregister_port(priv->line); cpu_latency_qos_remove_request(&priv->pm_qos_request); - device_init_wakeup(&pdev->dev, false); - return 0; + device_set_wakeup_capable(&pdev->dev, false); } -#ifdef CONFIG_PM_SLEEP static int omap8250_prepare(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); @@ -1579,33 +1650,57 @@ static int omap8250_suspend(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); struct uart_8250_port *up = serial8250_get_port(priv->line); + int err = 0; + + err = omap8250_select_wakeup_pinctrl(dev, priv); + if (err) { + dev_err(dev, "Failed to select wakeup pinctrl, aborting suspend %pe\n", + ERR_PTR(err)); + return err; + } serial8250_suspend_port(priv->line); - pm_runtime_get_sync(dev); + err = pm_runtime_resume_and_get(dev); + if (err) + return err; if (!device_may_wakeup(dev)) priv->wer = 0; serial_out(up, UART_OMAP_WER, priv->wer); - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - + if (uart_console(&up->port) && console_suspend_enabled) + err = pm_runtime_force_suspend(dev); flush_work(&priv->qos_work); - return 0; + + return err; } static int omap8250_resume(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + int err; + + err = pinctrl_select_default_state(dev); + if (err) { + dev_err(dev, "Failed to select default pinctrl state on resume: %pe\n", + ERR_PTR(err)); + return err; + } + + if (uart_console(&up->port) && console_suspend_enabled) { + err = pm_runtime_force_resume(dev); + if (err) + return err; + } serial8250_resume_port(priv->line); + /* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */ + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return 0; } -#else -#define omap8250_prepare NULL -#define omap8250_complete NULL -#endif -#ifdef CONFIG_PM static int omap8250_lost_context(struct uart_8250_port *up) { u32 val; @@ -1621,11 +1716,15 @@ static int omap8250_lost_context(struct uart_8250_port *up) return 0; } +static void uart_write(struct omap8250_priv *priv, u32 reg, u32 val) +{ + writel(val, priv->membase + (reg << OMAP_UART_REGSHIFT)); +} + /* TODO: in future, this should happen via API in drivers/reset/ */ static int omap8250_soft_reset(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - struct uart_8250_port *up = serial8250_get_port(priv->line); int timeout = 100; int sysc; int syss; @@ -1639,20 +1738,20 @@ static int omap8250_soft_reset(struct device *dev) * needing omap8250_soft_reset() quirk. Do it in two writes as * recommended in the comment for omap8250_update_scr(). */ - serial_out(up, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1); - serial_out(up, UART_OMAP_SCR, + uart_write(priv, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1); + uart_write(priv, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL); - sysc = serial_in(up, UART_OMAP_SYSC); + sysc = uart_read(priv, UART_OMAP_SYSC); /* softreset the UART */ sysc |= OMAP_UART_SYSC_SOFTRESET; - serial_out(up, UART_OMAP_SYSC, sysc); + uart_write(priv, UART_OMAP_SYSC, sysc); /* By experiments, 1us enough for reset complete on AM335x */ do { udelay(1); - syss = serial_in(up, UART_OMAP_SYSS); + syss = uart_read(priv, UART_OMAP_SYSS); } while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE)); if (!timeout) { @@ -1666,23 +1765,10 @@ static int omap8250_soft_reset(struct device *dev) static int omap8250_runtime_suspend(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - struct uart_8250_port *up; + struct uart_8250_port *up = NULL; - /* In case runtime-pm tries this before we are setup */ - if (!priv) - return 0; - - up = serial8250_get_port(priv->line); - /* - * When using 'no_console_suspend', the console UART must not be - * suspended. Since driver suspend is managed by runtime suspend, - * preventing runtime suspend (by returning error) will keep device - * active during suspend. - */ - if (priv->is_suspending && !console_suspend_enabled) { - if (uart_console(&up->port)) - return -EBUSY; - } + if (priv->line >= 0) + up = serial8250_get_port(priv->line); if (priv->habit & UART_ERRATA_CLOCK_DISABLE) { int ret; @@ -1691,17 +1777,20 @@ static int omap8250_runtime_suspend(struct device *dev) if (ret) return ret; - /* Restore to UART mode after reset (for wakeup) */ - omap8250_update_mdr1(up, priv); - /* Restore wakeup enable register */ - serial_out(up, UART_OMAP_WER, priv->wer); + if (up) { + /* Restore to UART mode after reset (for wakeup) */ + omap8250_update_mdr1(up, priv); + /* Restore wakeup enable register */ + serial_out(up, UART_OMAP_WER, priv->wer); + } } - if (up->dma && up->dma->rxchan) + if (up && up->dma && up->dma->rxchan) omap_8250_rx_dma_flush(up); priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; schedule_work(&priv->qos_work); + atomic_set(&priv->active, 0); return 0; } @@ -1709,25 +1798,31 @@ static int omap8250_runtime_suspend(struct device *dev) static int omap8250_runtime_resume(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - struct uart_8250_port *up; + struct uart_8250_port *up = NULL; - /* In case runtime-pm tries this before we are setup */ - if (!priv) + /* Did the hardware wake to a device IO interrupt before a wakeirq? */ + if (atomic_read(&priv->active)) return 0; - up = serial8250_get_port(priv->line); + if (priv->line >= 0) + up = serial8250_get_port(priv->line); - if (omap8250_lost_context(up)) + if (up && omap8250_lost_context(up)) { + guard(uart_port_lock_irq)(&up->port); omap8250_restore_regs(up); + } - if (up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) + if (up && up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) { + guard(uart_port_lock_irq)(&up->port); omap_8250_rx_dma(up); + } + atomic_set(&priv->active, 1); priv->latency = priv->calc_latency; schedule_work(&priv->qos_work); + return 0; } -#endif #ifdef CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP static int __init omap8250_console_fixup(void) @@ -1770,17 +1865,17 @@ console_initcall(omap8250_console_fixup); #endif static const struct dev_pm_ops omap8250_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(omap8250_suspend, omap8250_resume) - SET_RUNTIME_PM_OPS(omap8250_runtime_suspend, + SYSTEM_SLEEP_PM_OPS(omap8250_suspend, omap8250_resume) + RUNTIME_PM_OPS(omap8250_runtime_suspend, omap8250_runtime_resume, NULL) - .prepare = omap8250_prepare, - .complete = omap8250_complete, + .prepare = pm_sleep_ptr(omap8250_prepare), + .complete = pm_sleep_ptr(omap8250_complete), }; static struct platform_driver omap8250_platform_driver = { .driver = { .name = "omap8250", - .pm = &omap8250_dev_pm_ops, + .pm = pm_ptr(&omap8250_dev_pm_ops), .of_match_table = omap8250_dt_ids, }, .probe = omap8250_probe, |