1 files changed, 887 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
new file mode 100644
index 000000000000..feeede164886
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Probe module for 8250/16550-type MCHP PCI serial ports.
+ *
+ *  Based on drivers/tty/serial/8250/8250_pci.c,
+ *
+ *  Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved.
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/circ_buf.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gfp_types.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <asm/byteorder.h>
+
+#include "8250.h"
+#include "8250_pcilib.h"
+
+#define PCI_DEVICE_ID_EFAR_PCI12000		0xa002
+#define PCI_DEVICE_ID_EFAR_PCI11010		0xa012
+#define PCI_DEVICE_ID_EFAR_PCI11101		0xa022
+#define PCI_DEVICE_ID_EFAR_PCI11400		0xa032
+#define PCI_DEVICE_ID_EFAR_PCI11414		0xa042
+
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p	0x0001
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012	0x0002
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013	0x0003
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023	0x0004
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123	0x0005
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01	0x0006
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02	0x0007
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03	0x0008
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12	0x0009
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13	0x000a
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23	0x000b
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0	0x000c
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1	0x000d
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2	0x000e
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3	0x000f
+
+#define PCI_SUBDEVICE_ID_EFAR_PCI12000		PCI_DEVICE_ID_EFAR_PCI12000
+#define PCI_SUBDEVICE_ID_EFAR_PCI11010		PCI_DEVICE_ID_EFAR_PCI11010
+#define PCI_SUBDEVICE_ID_EFAR_PCI11101		PCI_DEVICE_ID_EFAR_PCI11101
+#define PCI_SUBDEVICE_ID_EFAR_PCI11400		PCI_DEVICE_ID_EFAR_PCI11400
+#define PCI_SUBDEVICE_ID_EFAR_PCI11414		PCI_DEVICE_ID_EFAR_PCI11414
+
+#define UART_SYSTEM_ADDR_BASE			0x1000
+#define UART_DEV_REV_REG			(UART_SYSTEM_ADDR_BASE + 0x00)
+#define UART_DEV_REV_MASK			GENMASK(7, 0)
+#define UART_SYSLOCK_REG			(UART_SYSTEM_ADDR_BASE + 0xA0)
+#define UART_SYSLOCK				BIT(2)
+#define SYSLOCK_SLEEP_TIMEOUT			100
+#define SYSLOCK_RETRY_CNT			1000
+
+#define UART_RX_BYTE_FIFO			0x00
+#define UART_TX_BYTE_FIFO			0x00
+#define UART_FIFO_CTL				0x02
+
+#define UART_MODEM_CTL_REG			0x04
+#define UART_MODEM_CTL_RTS_SET			BIT(1)
+
+#define UART_LINE_STAT_REG			0x05
+#define UART_LINE_XMIT_CHECK_MASK		GENMASK(6, 5)
+
+#define UART_ACTV_REG				0x11
+#define UART_BLOCK_SET_ACTIVE			BIT(0)
+
+#define UART_PCI_CTRL_REG			0x80
+#define UART_PCI_CTRL_SET_MULTIPLE_MSI		BIT(4)
+#define UART_PCI_CTRL_D3_CLK_ENABLE		BIT(0)
+
+#define ADCL_CFG_REG				0x40
+#define ADCL_CFG_POL_SEL			BIT(2)
+#define ADCL_CFG_PIN_SEL			BIT(1)
+#define ADCL_CFG_EN				BIT(0)
+
+#define UART_BIT_SAMPLE_CNT_8			8
+#define UART_BIT_SAMPLE_CNT_16			16
+#define BAUD_CLOCK_DIV_INT_MSK			GENMASK(31, 8)
+#define ADCL_CFG_RTS_DELAY_MASK			GENMASK(11, 8)
+#define FRAC_DIV_TX_END_POINT_MASK		GENMASK(23, 20)
+
+#define UART_WAKE_REG				0x8C
+#define UART_WAKE_MASK_REG			0x90
+#define UART_WAKE_N_PIN				BIT(2)
+#define UART_WAKE_NCTS				BIT(1)
+#define UART_WAKE_INT				BIT(0)
+#define UART_WAKE_SRCS	\
+	(UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT)
+
+#define UART_BAUD_CLK_DIVISOR_REG		0x54
+#define FRAC_DIV_CFG_REG			0x58
+
+#define UART_RESET_REG				0x94
+#define UART_RESET_D3_RESET_DISABLE		BIT(16)
+#define UART_RESET_HOT_RESET_DISABLE		BIT(17)
+
+#define UART_BURST_STATUS_REG			0x9C
+#define UART_TX_BURST_FIFO			0xA0
+#define UART_RX_BURST_FIFO			0xA4
+
+#define UART_BIT_DIVISOR_8			0x26731000
+#define UART_BIT_DIVISOR_16			0x6ef71000
+#define UART_BAUD_4MBPS				4000000
+
+#define MAX_PORTS				4
+#define PORT_OFFSET				0x100
+#define RX_BUF_SIZE				512
+#define UART_BYTE_SIZE                          1
+#define UART_BURST_SIZE				4
+
+#define UART_BST_STAT_RX_COUNT_MASK		0x00FF
+#define UART_BST_STAT_TX_COUNT_MASK		0xFF00
+#define UART_BST_STAT_IIR_INT_PEND		0x100000
+#define UART_LSR_OVERRUN_ERR_CLR		0x43
+#define UART_BST_STAT_LSR_RX_MASK		0x9F000000
+#define UART_BST_STAT_LSR_RX_ERR_MASK		0x9E000000
+#define UART_BST_STAT_LSR_OVERRUN_ERR		0x2000000
+#define UART_BST_STAT_LSR_PARITY_ERR		0x4000000
+#define UART_BST_STAT_LSR_FRAME_ERR		0x8000000
+#define UART_BST_STAT_LSR_THRE			0x20000000
+
+#define GET_MODEM_CTL_RTS_STATUS(reg)		((reg) & UART_MODEM_CTL_RTS_SET)
+#define GET_RTS_PIN_STATUS(val)			(((val) & TIOCM_RTS) >> 1)
+#define RTS_TOGGLE_STATUS_MASK(val, reg)	(GET_MODEM_CTL_RTS_STATUS(reg) \
+						 != GET_RTS_PIN_STATUS(val))
+
+struct pci1xxxx_8250 {
+	unsigned int nr;
+	u8 dev_rev;
+	u8 pad[3];
+	void __iomem *membase;
+	int line[] __counted_by(nr);
+};
+
+static const struct serial_rs485 pci1xxxx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+		 SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_after_send = 1,
+	/* Delay RTS before send is not supported */
+};
+
+static int pci1xxxx_set_sys_lock(struct pci1xxxx_8250 *port)
+{
+	writel(UART_SYSLOCK, port->membase + UART_SYSLOCK_REG);
+	return readl(port->membase + UART_SYSLOCK_REG);
+}
+
+static int pci1xxxx_acquire_sys_lock(struct pci1xxxx_8250 *port)
+{
+	u32 regval;
+
+	return readx_poll_timeout(pci1xxxx_set_sys_lock, port, regval,
+				  (regval & UART_SYSLOCK),
+				  SYSLOCK_SLEEP_TIMEOUT,
+				  SYSLOCK_RETRY_CNT * SYSLOCK_SLEEP_TIMEOUT);
+}
+
+static void pci1xxxx_release_sys_lock(struct pci1xxxx_8250 *port)
+{
+	writel(0x0, port->membase + UART_SYSLOCK_REG);
+}
+
+static const int logical_to_physical_port_idx[][MAX_PORTS] = {
+	{0,  1,  2,  3}, /* PCI12000, PCI11010, PCI11101, PCI11400, PCI11414 */
+	{0,  1,  2,  3}, /* PCI4p */
+	{0,  1,  2, -1}, /* PCI3p012 */
+	{0,  1,  3, -1}, /* PCI3p013 */
+	{0,  2,  3, -1}, /* PCI3p023 */
+	{1,  2,  3, -1}, /* PCI3p123 */
+	{0,  1, -1, -1}, /* PCI2p01 */
+	{0,  2, -1, -1}, /* PCI2p02 */
+	{0,  3, -1, -1}, /* PCI2p03 */
+	{1,  2, -1, -1}, /* PCI2p12 */
+	{1,  3, -1, -1}, /* PCI2p13 */
+	{2,  3, -1, -1}, /* PCI2p23 */
+	{0, -1, -1, -1}, /* PCI1p0 */
+	{1, -1, -1, -1}, /* PCI1p1 */
+	{2, -1, -1, -1}, /* PCI1p2 */
+	{3, -1, -1, -1}, /* PCI1p3 */
+};
+
+static int pci1xxxx_get_num_ports(struct pci_dev *dev)
+{
+	switch (dev->subsystem_device) {
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3:
+	case PCI_SUBDEVICE_ID_EFAR_PCI12000:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11010:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11101:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11400:
+	default:
+		return 1;
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23:
+		return 2;
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023:
+		return 3;
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11414:
+		return 4;
+	}
+}
+
+static unsigned int pci1xxxx_get_divisor(struct uart_port *port,
+					 unsigned int baud, unsigned int *frac)
+{
+	unsigned int uart_sample_cnt;
+	unsigned int quot;
+
+	if (baud >= UART_BAUD_4MBPS)
+		uart_sample_cnt = UART_BIT_SAMPLE_CNT_8;
+	else
+		uart_sample_cnt = UART_BIT_SAMPLE_CNT_16;
+
+	/*
+	 * Calculate baud rate sampling period in nanoseconds.
+	 * Fractional part x denotes x/255 parts of a nanosecond.
+	 */
+	quot = NSEC_PER_SEC / (baud * uart_sample_cnt);
+	*frac = (NSEC_PER_SEC - quot * baud * uart_sample_cnt) *
+		  255 / uart_sample_cnt / baud;
+
+	return quot;
+}
+
+static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud,
+				 unsigned int quot, unsigned int frac)
+{
+	if (baud >= UART_BAUD_4MBPS)
+		writel(UART_BIT_DIVISOR_8, port->membase + FRAC_DIV_CFG_REG);
+	else
+		writel(UART_BIT_DIVISOR_16, port->membase + FRAC_DIV_CFG_REG);
+
+	writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac,
+	       port->membase + UART_BAUD_CLK_DIVISOR_REG);
+}
+
+static void pci1xxxx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	u32 fract_div_cfg_reg;
+	u32 line_stat_reg;
+	u32 modem_ctl_reg;
+	u32 adcl_cfg_reg;
+
+	adcl_cfg_reg = readl(port->membase + ADCL_CFG_REG);
+
+	/* HW is responsible in ADCL_EN case */
+	if ((adcl_cfg_reg & (ADCL_CFG_EN | ADCL_CFG_PIN_SEL)))
+		return;
+
+	modem_ctl_reg = readl(port->membase + UART_MODEM_CTL_REG);
+
+	serial8250_do_set_mctrl(port, mctrl);
+
+	if (RTS_TOGGLE_STATUS_MASK(mctrl, modem_ctl_reg)) {
+		line_stat_reg = readl(port->membase + UART_LINE_STAT_REG);
+		if (line_stat_reg & UART_LINE_XMIT_CHECK_MASK) {
+			fract_div_cfg_reg = readl(port->membase +
+						  FRAC_DIV_CFG_REG);
+
+			writel((fract_div_cfg_reg &
+			       ~(FRAC_DIV_TX_END_POINT_MASK)),
+			       port->membase + FRAC_DIV_CFG_REG);
+
+			/* Enable ADC and set the nRTS pin */
+			writel((adcl_cfg_reg | (ADCL_CFG_EN |
+			       ADCL_CFG_PIN_SEL)),
+			       port->membase + ADCL_CFG_REG);
+
+			/* Revert to the original settings */
+			writel(adcl_cfg_reg, port->membase + ADCL_CFG_REG);
+
+			writel(fract_div_cfg_reg, port->membase +
+			       FRAC_DIV_CFG_REG);
+		}
+	}
+}
+
+static int pci1xxxx_rs485_config(struct uart_port *port,
+				 struct ktermios *termios,
+				 struct serial_rs485 *rs485)
+{
+	u32 delay_in_baud_periods;
+	u32 baud_period_in_ns;
+	u32 mode_cfg = 0;
+	u32 sample_cnt;
+	u32 clock_div;
+	u32 frac_div;
+
+	frac_div = readl(port->membase + FRAC_DIV_CFG_REG);
+
+	if (frac_div == UART_BIT_DIVISOR_16)
+		sample_cnt = UART_BIT_SAMPLE_CNT_16;
+	else
+		sample_cnt = UART_BIT_SAMPLE_CNT_8;
+
+	/*
+	 * pci1xxxx's uart hardware supports only RTS delay after
+	 * Tx and in units of bit times to a maximum of 15
+	 */
+	if (rs485->flags & SER_RS485_ENABLED) {
+		mode_cfg = ADCL_CFG_EN | ADCL_CFG_PIN_SEL;
+
+		if (!(rs485->flags & SER_RS485_RTS_ON_SEND))
+			mode_cfg |= ADCL_CFG_POL_SEL;
+
+		if (rs485->delay_rts_after_send) {
+			clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG);
+			baud_period_in_ns =
+				FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) *
+				sample_cnt;
+			delay_in_baud_periods =
+				rs485->delay_rts_after_send * NSEC_PER_MSEC /
+				baud_period_in_ns;
+			delay_in_baud_periods =
+				min_t(u32, delay_in_baud_periods,
+				      FIELD_MAX(ADCL_CFG_RTS_DELAY_MASK));
+			mode_cfg |= FIELD_PREP(ADCL_CFG_RTS_DELAY_MASK,
+					   delay_in_baud_periods);
+			rs485->delay_rts_after_send =
+				baud_period_in_ns * delay_in_baud_periods /
+				NSEC_PER_MSEC;
+		}
+	}
+	writel(mode_cfg, port->membase + ADCL_CFG_REG);
+	return 0;
+}
+
+static u32 pci1xxxx_read_burst_status(struct uart_port *port)
+{
+	u32 status;
+
+	status = readl(port->membase + UART_BURST_STATUS_REG);
+	if (status & UART_BST_STAT_LSR_RX_ERR_MASK) {
+		if (status & UART_BST_STAT_LSR_OVERRUN_ERR) {
+			writeb(UART_LSR_OVERRUN_ERR_CLR,
+			       port->membase + UART_FIFO_CTL);
+			port->icount.overrun++;
+		}
+
+		if (status & UART_BST_STAT_LSR_FRAME_ERR)
+			port->icount.frame++;
+
+		if (status & UART_BST_STAT_LSR_PARITY_ERR)
+			port->icount.parity++;
+	}
+	return status;
+}
+
+static void pci1xxxx_process_read_data(struct uart_port *port,
+				       unsigned char *rx_buff, u32 *buff_index,
+				       u32 *valid_byte_count)
+{
+	u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE;
+	u32 *burst_buf;
+
+	/*
+	 * Depending on the RX Trigger Level the number of bytes that can be
+	 * stored in RX FIFO at a time varies. Each transaction reads data
+	 * in DWORDs. If there are less than four remaining valid_byte_count
+	 * to read, the data is received one byte at a time.
+	 */
+	while (valid_burst_count--) {
+		if (*buff_index > (RX_BUF_SIZE - UART_BURST_SIZE))
+			break;
+		burst_buf = (u32 *)&rx_buff[*buff_index];
+		*burst_buf = readl(port->membase + UART_RX_BURST_FIFO);
+		*buff_index += UART_BURST_SIZE;
+		*valid_byte_count -= UART_BURST_SIZE;
+	}
+
+	while (*valid_byte_count) {
+		if (*buff_index >= RX_BUF_SIZE)
+			break;
+		rx_buff[*buff_index] = readb(port->membase +
+					     UART_RX_BYTE_FIFO);
+		*buff_index += UART_BYTE_SIZE;
+		*valid_byte_count -= UART_BYTE_SIZE;
+	}
+}
+
+static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status)
+{
+	u32 valid_byte_count = uart_status & UART_BST_STAT_RX_COUNT_MASK;
+	struct tty_port *tty_port = &port->state->port;
+	unsigned char rx_buff[RX_BUF_SIZE];
+	u32 buff_index = 0;
+	u32 copied_len;
+
+	if (valid_byte_count != 0 &&
+	    valid_byte_count < RX_BUF_SIZE) {
+		pci1xxxx_process_read_data(port, rx_buff, &buff_index,
+					   &valid_byte_count);
+
+		copied_len = (u32)tty_insert_flip_string(tty_port, rx_buff,
+							 buff_index);
+
+		if (copied_len != buff_index)
+			port->icount.overrun += buff_index - copied_len;
+
+		port->icount.rx += buff_index;
+		tty_flip_buffer_push(tty_port);
+	}
+}
+
+static void pci1xxxx_process_write_data(struct uart_port *port,
+					int *data_empty_count,
+					u32 *valid_byte_count)
+{
+	struct tty_port *tport = &port->state->port;
+	u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE;
+
+	/*
+	 * Each transaction transfers data in DWORDs. If there are less than
+	 * four remaining valid_byte_count to transfer or if the circular
+	 * buffer has insufficient space for a DWORD, the data is transferred
+	 * one byte at a time.
+	 */
+	while (valid_burst_count) {
+		u32 c;
+
+		if (*data_empty_count - UART_BURST_SIZE < 0)
+			break;
+		if (kfifo_len(&tport->xmit_fifo) < UART_BURST_SIZE)
+			break;
+		if (WARN_ON(kfifo_out(&tport->xmit_fifo, (u8 *)&c, sizeof(c)) !=
+		    sizeof(c)))
+			break;
+		writel(c, port->membase + UART_TX_BURST_FIFO);
+		*valid_byte_count -= UART_BURST_SIZE;
+		*data_empty_count -= UART_BURST_SIZE;
+		valid_burst_count -= UART_BYTE_SIZE;
+	}
+
+	while (*valid_byte_count) {
+		u8 c;
+
+		if (!kfifo_get(&tport->xmit_fifo, &c))
+			break;
+		writeb(c, port->membase + UART_TX_BYTE_FIFO);
+		*data_empty_count -= UART_BYTE_SIZE;
+		*valid_byte_count -= UART_BYTE_SIZE;
+
+		/*
+		 * If there are any pending burst count, data is handled by
+		 * transmitting DWORDs at a time.
+		 */
+		if (valid_burst_count &&
+		    kfifo_len(&tport->xmit_fifo) >= UART_BURST_SIZE)
+			break;
+	}
+}
+
+static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	struct tty_port *tport = &port->state->port;
+	u32 valid_byte_count;
+	int data_empty_count;
+
+	if (port->x_char) {
+		writeb(port->x_char, port->membase + UART_TX);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if ((uart_tx_stopped(port)) || kfifo_is_empty(&tport->xmit_fifo)) {
+		port->ops->stop_tx(port);
+	} else {
+		data_empty_count = (pci1xxxx_read_burst_status(port) &
+				    UART_BST_STAT_TX_COUNT_MASK) >> 8;
+		do {
+			valid_byte_count = kfifo_len(&tport->xmit_fifo);
+
+			pci1xxxx_process_write_data(port,
+						    &data_empty_count,
+						    &valid_byte_count);
+
+			port->icount.tx++;
+			if (kfifo_is_empty(&tport->xmit_fifo))
+				break;
+		} while (data_empty_count && valid_byte_count);
+	}
+
+	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	 /*
+	  * With RPM enabled, we have to wait until the FIFO is empty before
+	  * the HW can go idle. So we get here once again with empty FIFO and
+	  * disable the interrupt and RPM in __stop_tx()
+	  */
+	if (kfifo_is_empty(&tport->xmit_fifo) &&
+	    !(up->capabilities & UART_CAP_RPM))
+		port->ops->stop_tx(port);
+}
+
+static int pci1xxxx_handle_irq(struct uart_port *port)
+{
+	unsigned long flags;
+	u32 status;
+
+	status = pci1xxxx_read_burst_status(port);
+
+	if (status & UART_BST_STAT_IIR_INT_PEND)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (status & UART_BST_STAT_LSR_RX_MASK)
+		pci1xxxx_rx_burst(port, status);
+
+	if (status & UART_BST_STAT_LSR_THRE)
+		pci1xxxx_tx_burst(port, status);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 1;
+}
+
+static bool pci1xxxx_port_suspend(int line)
+{
+	struct uart_8250_port *up = serial8250_get_port(line);
+	struct uart_port *port = &up->port;
+	struct tty_port *tport = &port->state->port;
+	unsigned long flags;
+	bool ret = false;
+	u8 wakeup_mask;
+
+	mutex_lock(&tport->mutex);
+	if (port->suspended == 0 && port->dev) {
+		wakeup_mask = readb(up->port.membase + UART_WAKE_MASK_REG);
+
+		uart_port_lock_irqsave(port, &flags);
+		port->mctrl &= ~TIOCM_OUT2;
+		port->ops->set_mctrl(port, port->mctrl);
+		uart_port_unlock_irqrestore(port, flags);
+
+		ret = (wakeup_mask & UART_WAKE_SRCS) != UART_WAKE_SRCS;
+	}
+
+	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
+	mutex_unlock(&tport->mutex);
+
+	return ret;
+}
+
+static void pci1xxxx_port_resume(int line)
+{
+	struct uart_8250_port *up = serial8250_get_port(line);
+	struct uart_port *port = &up->port;
+	struct tty_port *tport = &port->state->port;
+	unsigned long flags;
+
+	mutex_lock(&tport->mutex);
+	writeb(UART_BLOCK_SET_ACTIVE, port->membase + UART_ACTV_REG);
+	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
+
+	if (port->suspended == 0) {
+		uart_port_lock_irqsave(port, &flags);
+		port->mctrl |= TIOCM_OUT2;
+		port->ops->set_mctrl(port, port->mctrl);
+		uart_port_unlock_irqrestore(port, flags);
+	}
+	mutex_unlock(&tport->mutex);
+}
+
+static int pci1xxxx_suspend(struct device *dev)
+{
+	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
+	struct pci_dev *pcidev = to_pci_dev(dev);
+	bool wakeup = false;
+	unsigned int data;
+	void __iomem *p;
+	int i;
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0) {
+			serial8250_suspend_port(priv->line[i]);
+			wakeup |= pci1xxxx_port_suspend(priv->line[i]);
+		}
+	}
+
+	p = pci_ioremap_bar(pcidev, 0);
+	if (!p) {
+		dev_err(dev, "remapping of bar 0 memory failed");
+		return -ENOMEM;
+	}
+
+	data = readl(p + UART_RESET_REG);
+
+	if (priv->dev_rev >= 0xC0)
+		data |= UART_RESET_HOT_RESET_DISABLE;
+
+	writel(data | UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
+
+	if (wakeup)
+		writeb(UART_PCI_CTRL_D3_CLK_ENABLE, p + UART_PCI_CTRL_REG);
+
+	iounmap(p);
+	device_set_wakeup_enable(dev, true);
+	pci_wake_from_d3(pcidev, true);
+
+	return 0;
+}
+
+static int pci1xxxx_resume(struct device *dev)
+{
+	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
+	struct pci_dev *pcidev = to_pci_dev(dev);
+	unsigned int data;
+	void __iomem *p;
+	int i;
+
+	p = pci_ioremap_bar(pcidev, 0);
+	if (!p) {
+		dev_err(dev, "remapping of bar 0 memory failed");
+		return -ENOMEM;
+	}
+
+	data = readl(p + UART_RESET_REG);
+
+	if (priv->dev_rev >= 0xC0)
+		data &= ~UART_RESET_HOT_RESET_DISABLE;
+
+	writel(data & ~UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
+
+	iounmap(p);
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0) {
+			pci1xxxx_port_resume(priv->line[i]);
+			serial8250_resume_port(priv->line[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int pci1xxxx_setup(struct pci_dev *pdev,
+			  struct uart_8250_port *port, int port_idx, struct pci1xxxx_8250 *priv)
+{
+	int ret;
+
+	port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST;
+	port->port.type = PORT_MCHP16550A;
+	/*
+	 * 8250 core considers prescaller value to be always 16.
+	 * The MCHP ports support downscaled mode and hence the
+	 * functional UART clock can be lower, i.e. 62.5MHz, than
+	 * software expects in order to support higher baud rates.
+	 * Assign here 64MHz to support 4Mbps.
+	 *
+	 * The value itself is not really used anywhere except baud
+	 * rate calculations, so we can mangle it as we wish.
+	 */
+	port->port.uartclk = 64 * HZ_PER_MHZ;
+	port->port.set_termios = serial8250_do_set_termios;
+	port->port.get_divisor = pci1xxxx_get_divisor;
+	port->port.set_divisor = pci1xxxx_set_divisor;
+	port->port.rs485_config = pci1xxxx_rs485_config;
+	port->port.rs485_supported = pci1xxxx_rs485_supported;
+
+	/*
+	 * C0 and later revisions support Burst operation.
+	 * RTS workaround in mctrl is applicable only to B0.
+	 */
+	if (priv->dev_rev >= 0xC0)
+		port->port.handle_irq = pci1xxxx_handle_irq;
+	else if (priv->dev_rev == 0xB0)
+		port->port.set_mctrl = pci1xxxx_set_mctrl;
+
+	ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0, priv->membase);
+	if (ret < 0)
+		return ret;
+
+	writeb(UART_BLOCK_SET_ACTIVE, port->port.membase + UART_ACTV_REG);
+	writeb(UART_WAKE_SRCS, port->port.membase + UART_WAKE_REG);
+	writeb(UART_WAKE_N_PIN, port->port.membase + UART_WAKE_MASK_REG);
+
+	return 0;
+}
+
+static unsigned int pci1xxxx_get_max_port(int subsys_dev)
+{
+	unsigned int i = MAX_PORTS;
+
+	if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx))
+		while (i--) {
+			if (logical_to_physical_port_idx[subsys_dev][i] != -1)
+				return logical_to_physical_port_idx[subsys_dev][i] + 1;
+		}
+
+	if (subsys_dev == PCI_SUBDEVICE_ID_EFAR_PCI11414)
+		return 4;
+
+	return 1;
+}
+
+static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
+{
+	if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx))
+		return logical_to_physical_port_idx[subsys_dev][port];
+
+	return logical_to_physical_port_idx[0][port];
+}
+
+static int pci1xxxx_get_device_revision(struct pci1xxxx_8250 *priv)
+{
+	u32 regval;
+	int ret;
+
+	/*
+	 * DEV REV is a system register, HW Syslock bit
+	 * should be acquired before accessing the register
+	 */
+	ret = pci1xxxx_acquire_sys_lock(priv);
+	if (ret)
+		return ret;
+
+	regval = readl(priv->membase + UART_DEV_REV_REG);
+	priv->dev_rev = regval & UART_DEV_REV_MASK;
+
+	pci1xxxx_release_sys_lock(priv);
+
+	return 0;
+}
+
+static int pci1xxxx_serial_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct pci1xxxx_8250 *priv;
+	struct uart_8250_port uart;
+	unsigned int max_vec_reqd;
+	unsigned int nr_ports, i;
+	int num_vectors;
+	int subsys_dev;
+	int port_idx;
+	int ret;
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	nr_ports = pci1xxxx_get_num_ports(pdev);
+
+	priv = devm_kzalloc(dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->membase = pci_ioremap_bar(pdev, 0);
+	if (!priv->membase)
+		return -ENOMEM;
+
+	ret = pci1xxxx_get_device_revision(priv);
+	if (ret)
+		return ret;
+
+	pci_set_master(pdev);
+
+	priv->nr = nr_ports;
+
+	subsys_dev = pdev->subsystem_device;
+	max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
+
+	num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd, PCI_IRQ_ALL_TYPES);
+	if (num_vectors < 0) {
+		pci_iounmap(pdev, priv->membase);
+		return num_vectors;
+	}
+
+	memset(&uart, 0, sizeof(uart));
+	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+	uart.port.dev = dev;
+
+	if (num_vectors == max_vec_reqd)
+		writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI, priv->membase + UART_PCI_CTRL_REG);
+
+	for (i = 0; i < nr_ports; i++) {
+		priv->line[i] = -ENODEV;
+
+		port_idx = pci1xxxx_logical_to_physical_port_translate(subsys_dev, i);
+
+		if (num_vectors == max_vec_reqd)
+			uart.port.irq = pci_irq_vector(pdev, port_idx);
+		else
+			uart.port.irq = pci_irq_vector(pdev, 0);
+
+		rc = pci1xxxx_setup(pdev, &uart, port_idx, priv);
+		if (rc) {
+			dev_warn(dev, "Failed to setup port %u\n", i);
+			continue;
+		}
+
+		priv->line[i] = serial8250_register_8250_port(&uart);
+		if (priv->line[i] < 0) {
+			dev_warn(dev,
+				"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+				uart.port.iobase, uart.port.irq, uart.port.iotype,
+				priv->line[i]);
+		}
+	}
+
+	pci_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static void pci1xxxx_serial_remove(struct pci_dev *dev)
+{
+	struct pci1xxxx_8250 *priv = pci_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0)
+			serial8250_unregister_port(priv->line[i]);
+	}
+
+	pci_free_irq_vectors(dev);
+	pci_iounmap(dev, priv->membase);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_pm_ops, pci1xxxx_suspend, pci1xxxx_resume);
+
+static const struct pci_device_id pci1xxxx_pci_tbl[] = {
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11010) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11101) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11400) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11414) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI12000) },
+	{}
+};
+MODULE_DEVICE_TABLE(pci, pci1xxxx_pci_tbl);
+
+static struct pci_driver pci1xxxx_pci_driver = {
+	.name = "pci1xxxx serial",
+	.probe = pci1xxxx_serial_probe,
+	.remove = pci1xxxx_serial_remove,
+	.driver = {
+		.pm     = pm_sleep_ptr(&pci1xxxx_pm_ops),
+	},
+	.id_table = pci1xxxx_pci_tbl,
+};
+module_pci_driver(pci1xxxx_pci_driver);
+
+static_assert((ARRAY_SIZE(logical_to_physical_port_idx) == PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 + 1));
+
+MODULE_IMPORT_NS("SERIAL_8250_PCI");
+MODULE_DESCRIPTION("Microchip Technology Inc. PCIe to UART module");
+MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
+MODULE_AUTHOR("Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>");
+MODULE_LICENSE("GPL");