summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/Kconfig')
-rw-r--r--drivers/tty/serial/Kconfig104
1 files changed, 52 insertions, 52 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 540142c5b7b3..99f5da3bf913 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -287,26 +287,26 @@ config SERIAL_SAMSUNG_CONSOLE
boot time.)
config SERIAL_SIRFSOC
- tristate "SiRF SoC Platform Serial port support"
- depends on ARCH_SIRF
- select SERIAL_CORE
- help
- Support for the on-chip UART on the CSR SiRFprimaII series,
- providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
- provide all of these ports, depending on how the serial port
- pins are configured).
+ tristate "SiRF SoC Platform Serial port support"
+ depends on ARCH_SIRF
+ select SERIAL_CORE
+ help
+ Support for the on-chip UART on the CSR SiRFprimaII series,
+ providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
+ provide all of these ports, depending on how the serial port
+ pins are configured).
config SERIAL_SIRFSOC_CONSOLE
- bool "Support for console on SiRF SoC serial port"
- depends on SERIAL_SIRFSOC=y
- select SERIAL_CORE_CONSOLE
- help
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttySiRFx". (Try "man bootparam" or see the documentation of
- your boot loader about how to pass options to the kernel at
- boot time.)
+ bool "Support for console on SiRF SoC serial port"
+ depends on SERIAL_SIRFSOC=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySiRFx". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at
+ boot time.)
config SERIAL_TEGRA
tristate "NVIDIA Tegra20/30 SoC serial controller"
@@ -1078,41 +1078,41 @@ config SERIAL_SCCNXP_CONSOLE
Support for console on SCCNXP serial ports.
config SERIAL_SC16IS7XX_CORE
- tristate
+ tristate
config SERIAL_SC16IS7XX
- tristate "SC16IS7xx serial support"
- select SERIAL_CORE
- depends on (SPI_MASTER && !I2C) || I2C
- help
- This selects support for SC16IS7xx serial ports.
- Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
- SC16IS760 and SC16IS762. Select supported buses using options below.
+ tristate "SC16IS7xx serial support"
+ select SERIAL_CORE
+ depends on (SPI_MASTER && !I2C) || I2C
+ help
+ This selects support for SC16IS7xx serial ports.
+ Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+ SC16IS760 and SC16IS762. Select supported buses using options below.
config SERIAL_SC16IS7XX_I2C
- bool "SC16IS7xx for I2C interface"
- depends on SERIAL_SC16IS7XX
- depends on I2C
- select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
- select REGMAP_I2C if I2C
- default y
- help
- Enable SC16IS7xx driver on I2C bus,
- If required say y, and say n to i2c if not required,
- Enabled by default to support oldconfig.
- You must select at least one bus for the driver to be built.
+ bool "SC16IS7xx for I2C interface"
+ depends on SERIAL_SC16IS7XX
+ depends on I2C
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_I2C if I2C
+ default y
+ help
+ Enable SC16IS7xx driver on I2C bus,
+ If required say y, and say n to i2c if not required,
+ Enabled by default to support oldconfig.
+ You must select at least one bus for the driver to be built.
config SERIAL_SC16IS7XX_SPI
- bool "SC16IS7xx for spi interface"
- depends on SERIAL_SC16IS7XX
- depends on SPI_MASTER
- select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
- select REGMAP_SPI if SPI_MASTER
- help
- Enable SC16IS7xx driver on SPI bus,
- If required say y, and say n to spi if not required,
- This is additional support to exsisting driver.
- You must select at least one bus for the driver to be built.
+ bool "SC16IS7xx for spi interface"
+ depends on SERIAL_SC16IS7XX
+ depends on SPI_MASTER
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_SPI if SPI_MASTER
+ help
+ Enable SC16IS7xx driver on SPI bus,
+ If required say y, and say n to spi if not required,
+ This is additional support to exsisting driver.
+ You must select at least one bus for the driver to be built.
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
@@ -1212,7 +1212,7 @@ config SERIAL_ALTERA_UART_CONSOLE
Enable a Altera UART port to be the system console.
config SERIAL_IFX6X60
- tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
+ tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
depends on GPIOLIB || COMPILE_TEST
depends on SPI && HAS_DMA
help
@@ -1392,19 +1392,19 @@ config SERIAL_FSL_LPUART_CONSOLE
you can make it the console by answering Y to this option.
config SERIAL_FSL_LINFLEXUART
- tristate "Freescale linflexuart serial port support"
+ tristate "Freescale LINFlexD UART serial port support"
depends on PRINTK
select SERIAL_CORE
help
- Support for the on-chip linflexuart on some Freescale SOCs.
+ Support for the on-chip LINFlexD UART on some Freescale SOCs.
config SERIAL_FSL_LINFLEXUART_CONSOLE
- bool "Console on Freescale linflexuart serial port"
+ bool "Console on Freescale LINFlexD UART serial port"
depends on SERIAL_FSL_LINFLEXUART=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
help
- If you have enabled the linflexuart serial port on the Freescale
+ If you have enabled the LINFlexD UART serial port on the Freescale
SoCs, you can make it the console by answering Y to this option.
config SERIAL_CONEXANT_DIGICOLOR