diff options
Diffstat (limited to 'drivers/tty/serial/arc_uart.c')
| -rw-r--r-- | drivers/tty/serial/arc_uart.c | 53 |
1 files changed, 24 insertions, 29 deletions
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 4b2512eef577..5c4895d154c0 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -155,7 +155,7 @@ static unsigned int arc_serial_tx_empty(struct uart_port *port) */ static void arc_serial_tx_chars(struct uart_port *port) { - struct circ_buf *xmit = &port->state->xmit; + struct tty_port *tport = &port->state->port; int sent = 0; unsigned char ch; @@ -164,9 +164,7 @@ static void arc_serial_tx_chars(struct uart_port *port) port->icount.tx++; port->x_char = 0; sent = 1; - } else if (!uart_circ_empty(xmit)) { - ch = xmit->buf[xmit->tail]; - uart_xmit_advance(port, 1); + } else if (uart_fifo_get(port, &ch)) { while (!(UART_GET_STATUS(port) & TXEMPTY)) cpu_relax(); UART_SET_DATA(port, ch); @@ -177,7 +175,7 @@ static void arc_serial_tx_chars(struct uart_port *port) * If num chars in xmit buffer are too few, ask tty layer for more. * By Hard ISR to schedule processing in software interrupt part */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(port); if (sent) @@ -195,8 +193,6 @@ static void arc_serial_start_tx(struct uart_port *port) static void arc_serial_rx_chars(struct uart_port *port, unsigned int status) { - unsigned int ch, flg = 0; - /* * UART has 4 deep RX-FIFO. Driver's recongnition of this fact * is very subtle. Here's how ... @@ -207,24 +203,23 @@ static void arc_serial_rx_chars(struct uart_port *port, unsigned int status) * controller, which is indeed the Rx-FIFO. */ do { + u8 ch, flg = TTY_NORMAL; + /* * This could be an Rx Intr for err (no data), * so check err and clear that Intr first */ - if (unlikely(status & (RXOERR | RXFERR))) { - if (status & RXOERR) { - port->icount.overrun++; - flg = TTY_OVERRUN; - UART_CLR_STATUS(port, RXOERR); - } - - if (status & RXFERR) { - port->icount.frame++; - flg = TTY_FRAME; - UART_CLR_STATUS(port, RXFERR); - } - } else - flg = TTY_NORMAL; + if (status & RXOERR) { + port->icount.overrun++; + flg = TTY_OVERRUN; + UART_CLR_STATUS(port, RXOERR); + } + + if (status & RXFERR) { + port->icount.frame++; + flg = TTY_FRAME; + UART_CLR_STATUS(port, RXFERR); + } if (status & RXEMPTY) continue; @@ -282,9 +277,9 @@ static irqreturn_t arc_serial_isr(int irq, void *dev_id) if (status & RXIENB) { /* already in ISR, no need of xx_irqsave */ - spin_lock(&port->lock); + uart_port_lock(port); arc_serial_rx_chars(port, status); - spin_unlock(&port->lock); + uart_port_unlock(port); } if ((status & TXIENB) && (status & TXEMPTY)) { @@ -294,12 +289,12 @@ static irqreturn_t arc_serial_isr(int irq, void *dev_id) */ UART_TX_IRQ_DISABLE(port); - spin_lock(&port->lock); + uart_port_lock(port); if (!uart_tx_stopped(port)) arc_serial_tx_chars(port); - spin_unlock(&port->lock); + uart_port_unlock(port); } return IRQ_HANDLED; @@ -369,7 +364,7 @@ arc_serial_set_termios(struct uart_port *port, struct ktermios *new, uartl = hw_val & 0xFF; uarth = (hw_val >> 8) & 0xFF; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); UART_ALL_IRQ_DISABLE(port); @@ -394,7 +389,7 @@ arc_serial_set_termios(struct uart_port *port, struct ktermios *new, uart_update_timeout(port, new->c_cflag, baud); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static const char *arc_serial_type(struct uart_port *port) @@ -524,9 +519,9 @@ static void arc_serial_console_write(struct console *co, const char *s, struct uart_port *port = &arc_uart_ports[co->index].port; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); uart_console_write(port, s, count, arc_serial_console_putchar); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static struct console arc_console = { |
