diff options
Diffstat (limited to 'drivers/tty/serial/max310x.c')
| -rw-r--r-- | drivers/tty/serial/max310x.c | 691 |
1 files changed, 444 insertions, 247 deletions
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index dde0824b2fa5..ac7d3f197c3a 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio/driver.h> +#include <linux/i2c.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/property.h> @@ -29,6 +30,7 @@ #define MAX310X_MAJOR 204 #define MAX310X_MINOR 209 #define MAX310X_UART_NRMAX 16 +#define MAX310X_MAX_PORTS 4 /* Maximum number of UART ports per IC. */ /* MAX310X register definitions */ #define MAX310X_RHR_REG (0x00) /* RX FIFO */ @@ -65,6 +67,7 @@ #define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */ #define MAX310X_CLKSRC_REG (0x1e) /* Clock source */ #define MAX310X_REG_1F (0x1f) +#define MAX310X_EXTREG_START (0x20) /* Only relevant in SPI mode. */ #define MAX310X_REVID_REG MAX310X_REG_1F /* Revision ID */ @@ -72,8 +75,9 @@ #define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */ /* Extended registers */ -#define MAX310X_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ - +#define MAX310X_REVID_EXTREG (0x25) /* Revision ID + * (extended addressing space) + */ /* IRQ register bits */ #define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ #define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ @@ -158,14 +162,14 @@ #define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ /* Flow control trigger level register masks */ -#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ -#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX310X_FLOWLVL_HALT_MASK GENMASK(3, 0) /* Flow control halt level */ +#define MAX310X_FLOWLVL_RES_MASK GENMASK(7, 4) /* Flow control resume level */ #define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f) #define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4) /* FIFO interrupt trigger level register masks */ -#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */ -#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_TX_MASK GENMASK(3, 0) /* TX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_RX_MASK GENMASK(7, 4) /* RX FIFO trigger level */ #define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f) #define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4) @@ -175,7 +179,8 @@ #define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs * are used in conjunction with * XOFF2 for definition of - * special character */ + * special character + */ #define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ #define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ #define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 @@ -212,8 +217,8 @@ */ /* PLL configuration register masks */ -#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */ -#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */ +#define MAX310X_PLLCFG_PREDIV_MASK GENMASK(5, 0) /* PLL predivision value */ +#define MAX310X_PLLCFG_PLLFACTOR_MASK GENMASK(7, 6) /* PLL multiplication factor */ /* Baud rate generator configuration register bits */ #define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ @@ -232,9 +237,17 @@ /* Misc definitions */ #define MAX310X_FIFO_SIZE (128) -#define MAX310x_REV_MASK (0xf8) +#define MAX310x_REV_MASK GENMASK(7, 3) #define MAX310X_WRITE_BIT 0x80 +/* Port startup definitions */ +#define MAX310X_PORT_STARTUP_WAIT_RETRIES 20 /* Number of retries */ +#define MAX310X_PORT_STARTUP_WAIT_DELAY_MS 10 /* Delay between retries */ + +/* Crystal-related definitions */ +#define MAX310X_XTAL_WAIT_RETRIES 20 /* Number of retries */ +#define MAX310X_XTAL_WAIT_DELAY_MS 10 /* Delay between retries */ + /* MAX3107 specific */ #define MAX3107_REV_ID (0xa0) @@ -245,12 +258,23 @@ #define MAX14830_BRGCFG_CLKDIS_BIT (1 << 6) /* Clock Disable */ #define MAX14830_REV_ID (0xb0) +struct max310x_if_cfg { + int (*extended_reg_enable)(struct device *dev, bool enable); + u8 rev_id_offset; +}; + struct max310x_devtype { - char name[9]; + struct { + unsigned short min; + unsigned short max; + } slave_addr; /* Relevant only in I2C mode. */ int nr; + char name[9]; u8 mode1; - int (*detect)(struct device *); - void (*power)(struct uart_port *, int); + u8 rev_id_val; + u8 rev_id_reg; /* Relevant only if rev_id_val is defined. */ + u8 power_reg; /* Register address for power/sleep control. */ + u8 power_bit; /* Bit for sleep or power-off mode (active high). */ }; struct max310x_one { @@ -258,9 +282,8 @@ struct max310x_one { struct work_struct tx_work; struct work_struct md_work; struct work_struct rs_work; + struct regmap *regmap; - u8 wr_header; - u8 rd_header; u8 rx_buf[MAX310X_FIFO_SIZE]; }; #define to_max310x_port(_port) \ @@ -268,6 +291,7 @@ struct max310x_one { struct max310x_port { const struct max310x_devtype *devtype; + const struct max310x_if_cfg *if_cfg; struct regmap *regmap; struct clk *clk; #ifdef CONFIG_GPIOLIB @@ -289,85 +313,74 @@ static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX); static u8 max310x_port_read(struct uart_port *port, u8 reg) { - struct max310x_port *s = dev_get_drvdata(port->dev); + struct max310x_one *one = to_max310x_port(port); unsigned int val = 0; - regmap_read(s->regmap, port->iobase + reg, &val); + regmap_read(one->regmap, reg, &val); return val; } static void max310x_port_write(struct uart_port *port, u8 reg, u8 val) { - struct max310x_port *s = dev_get_drvdata(port->dev); + struct max310x_one *one = to_max310x_port(port); - regmap_write(s->regmap, port->iobase + reg, val); + regmap_write(one->regmap, reg, val); } static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val) { - struct max310x_port *s = dev_get_drvdata(port->dev); - - regmap_update_bits(s->regmap, port->iobase + reg, mask, val); -} - -static int max3107_detect(struct device *dev) -{ - struct max310x_port *s = dev_get_drvdata(dev); - unsigned int val = 0; - int ret; - - ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val); - if (ret) - return ret; - - if (((val & MAX310x_REV_MASK) != MAX3107_REV_ID)) { - dev_err(dev, - "%s ID 0x%02x does not match\n", s->devtype->name, val); - return -ENODEV; - } + struct max310x_one *one = to_max310x_port(port); - return 0; + regmap_update_bits(one->regmap, reg, mask, val); } -static int max3108_detect(struct device *dev) +static int max310x_detect(struct device *dev) { struct max310x_port *s = dev_get_drvdata(dev); unsigned int val = 0; int ret; - /* MAX3108 have not REV ID register, we just check default value - * from clocksource register to make sure everything works. - */ - ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); - if (ret) - return ret; + /* Check if variant supports REV ID register: */ + if (s->devtype->rev_id_val) { + u8 rev_id_reg = s->devtype->rev_id_reg; - if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) { - dev_err(dev, "%s not present\n", s->devtype->name); - return -ENODEV; - } + /* Check if REV ID is in extended addressing space: */ + if (s->devtype->rev_id_reg >= MAX310X_EXTREG_START) { + ret = s->if_cfg->extended_reg_enable(dev, true); + if (ret) + return ret; - return 0; -} + /* Adjust REV ID extended addressing space address: */ + if (s->if_cfg->rev_id_offset) + rev_id_reg -= s->if_cfg->rev_id_offset; + } -static int max3109_detect(struct device *dev) -{ - struct max310x_port *s = dev_get_drvdata(dev); - unsigned int val = 0; - int ret; + regmap_read(s->regmap, rev_id_reg, &val); - ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, - MAX310X_EXTREG_ENBL); - if (ret) - return ret; + if (s->devtype->rev_id_reg >= MAX310X_EXTREG_START) { + ret = s->if_cfg->extended_reg_enable(dev, false); + if (ret) + return ret; + } - regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); - regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); - if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) { - dev_err(dev, - "%s ID 0x%02x does not match\n", s->devtype->name, val); - return -ENODEV; + if (((val & MAX310x_REV_MASK) != s->devtype->rev_id_val)) + return dev_err_probe(dev, -ENODEV, + "%s ID 0x%02x does not match\n", + s->devtype->name, val); + } else { + /* + * For variant without REV ID register, just check default value + * from clocksource register to make sure everything works. + */ + ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); + if (ret) + return ret; + + if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) + return dev_err_probe(dev, -ENODEV, + "%s not present\n", + s->devtype->name); } return 0; @@ -375,40 +388,10 @@ static int max3109_detect(struct device *dev) static void max310x_power(struct uart_port *port, int on) { - max310x_port_update(port, MAX310X_MODE1_REG, - MAX310X_MODE1_FORCESLEEP_BIT, - on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT); - if (on) - msleep(50); -} - -static int max14830_detect(struct device *dev) -{ - struct max310x_port *s = dev_get_drvdata(dev); - unsigned int val = 0; - int ret; - - ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, - MAX310X_EXTREG_ENBL); - if (ret) - return ret; - - regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); - regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); - if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) { - dev_err(dev, - "%s ID 0x%02x does not match\n", s->devtype->name, val); - return -ENODEV; - } - - return 0; -} + struct max310x_port *s = dev_get_drvdata(port->dev); -static void max14830_power(struct uart_port *port, int on) -{ - max310x_port_update(port, MAX310X_BRGCFG_REG, - MAX14830_BRGCFG_CLKDIS_BIT, - on ? 0 : MAX14830_BRGCFG_CLKDIS_BIT); + max310x_port_update(port, s->devtype->power_reg, s->devtype->power_bit, + on ? 0 : s->devtype->power_bit); if (on) msleep(50); } @@ -417,37 +400,61 @@ static const struct max310x_devtype max3107_devtype = { .name = "MAX3107", .nr = 1, .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT, - .detect = max3107_detect, - .power = max310x_power, + .rev_id_val = MAX3107_REV_ID, + .rev_id_reg = MAX310X_REVID_REG, + .power_reg = MAX310X_MODE1_REG, + .power_bit = MAX310X_MODE1_FORCESLEEP_BIT, + .slave_addr = { + .min = 0x2c, + .max = 0x2f, + }, }; static const struct max310x_devtype max3108_devtype = { .name = "MAX3108", .nr = 1, .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, - .detect = max3108_detect, - .power = max310x_power, + .rev_id_val = 0, /* Unsupported. */ + .rev_id_reg = 0, /* Irrelevant when rev_id_val is not defined. */ + .power_reg = MAX310X_MODE1_REG, + .power_bit = MAX310X_MODE1_FORCESLEEP_BIT, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, }; static const struct max310x_devtype max3109_devtype = { .name = "MAX3109", .nr = 2, .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, - .detect = max3109_detect, - .power = max310x_power, + .rev_id_val = MAX3109_REV_ID, + .rev_id_reg = MAX310X_REVID_EXTREG, + .power_reg = MAX310X_MODE1_REG, + .power_bit = MAX310X_MODE1_FORCESLEEP_BIT, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, }; static const struct max310x_devtype max14830_devtype = { .name = "MAX14830", .nr = 4, .mode1 = MAX310X_MODE1_IRQSEL_BIT, - .detect = max14830_detect, - .power = max14830_power, + .rev_id_val = MAX14830_REV_ID, + .rev_id_reg = MAX310X_REVID_EXTREG, + .power_reg = MAX310X_BRGCFG_REG, + .power_bit = MAX14830_BRGCFG_CLKDIS_BIT, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, }; static bool max310x_reg_writeable(struct device *dev, unsigned int reg) { - switch (reg & 0x1f) { + switch (reg) { case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: @@ -456,15 +463,13 @@ static bool max310x_reg_writeable(struct device *dev, unsigned int reg) case MAX310X_RXFIFOLVL_REG: return false; default: - break; + return true; } - - return true; } static bool max310x_reg_volatile(struct device *dev, unsigned int reg) { - switch (reg & 0x1f) { + switch (reg) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: @@ -478,25 +483,26 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg) case MAX310X_REG_1F: return true; default: - break; + return false; } - - return false; } static bool max310x_reg_precious(struct device *dev, unsigned int reg) { - switch (reg & 0x1f) { + switch (reg) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: case MAX310X_STS_IRQSTS_REG: return true; default: - break; + return false; } +} - return false; +static bool max310x_reg_noinc(struct device *dev, unsigned int reg) +{ + return reg == MAX310X_RHR_REG; } static int max310x_set_baud(struct uart_port *port, int baud) @@ -552,7 +558,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, +static s32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, unsigned long freq, bool xtal) { unsigned int div, clksrc, pllcfg = 0; @@ -610,12 +616,20 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, /* Wait for crystal */ if (xtal) { - unsigned int val; - msleep(10); - regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); - if (!(val & MAX310X_STS_CLKREADY_BIT)) { - dev_warn(dev, "clock is not stable yet\n"); - } + bool stable = false; + unsigned int try = 0, val = 0; + + do { + msleep(MAX310X_XTAL_WAIT_DELAY_MS); + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); + + if (val & MAX310X_STS_CLKREADY_BIT) + stable = true; + } while (!stable && (++try < MAX310X_XTAL_WAIT_RETRIES)); + + if (!stable) + return dev_err_probe(dev, -EAGAIN, + "clock is not stable\n"); } return bestfreq; @@ -624,40 +638,26 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len) { struct max310x_one *one = to_max310x_port(port); - struct spi_transfer xfer[] = { - { - .tx_buf = &one->wr_header, - .len = sizeof(one->wr_header), - }, { - .tx_buf = txbuf, - .len = len, - } - }; - spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer)); + + regmap_noinc_write(one->regmap, MAX310X_THR_REG, txbuf, len); } static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len) { struct max310x_one *one = to_max310x_port(port); - struct spi_transfer xfer[] = { - { - .tx_buf = &one->rd_header, - .len = sizeof(one->rd_header), - }, { - .rx_buf = rxbuf, - .len = len, - } - }; - spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer)); + + regmap_noinc_read(one->regmap, MAX310X_RHR_REG, rxbuf, len); } static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) { struct max310x_one *one = to_max310x_port(port); - unsigned int sts, ch, flag, i; + unsigned int sts, i; + u8 ch, flag; if (port->read_status_mask == MAX310X_LSR_RXOVR_BIT) { - /* We are just reading, happily ignoring any error conditions. + /* + * We are just reading, happily ignoring any error conditions. * Break condition, parity checking, framing errors -- they * are all ignored. That means that we can do a batch-read. * @@ -666,7 +666,7 @@ static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) * that the LSR register applies to the "current" character. * That's also the reason why we cannot do batched reads when * asked to check the individual statuses. - * */ + */ sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); max310x_batch_read(port, one->rx_buf, rxlen); @@ -747,8 +747,9 @@ static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) static void max310x_handle_tx(struct uart_port *port) { - struct circ_buf *xmit = &port->state->xmit; - unsigned int txlen, to_send, until_end; + struct tty_port *tport = &port->state->port; + unsigned int txlen, to_send; + unsigned char *tail; if (unlikely(port->x_char)) { max310x_port_write(port, MAX310X_THR_REG, port->x_char); @@ -757,33 +758,26 @@ static void max310x_handle_tx(struct uart_port *port) return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) return; - /* Get length of data pending in circular buffer */ - to_send = uart_circ_chars_pending(xmit); - until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (likely(to_send)) { - /* Limit to size of TX FIFO */ + /* + * It's a circ buffer -- wrap around. + * We could do that in one SPI transaction, but meh. + */ + while (!kfifo_is_empty(&tport->xmit_fifo)) { + /* Limit to space available in TX FIFO */ txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); txlen = port->fifosize - txlen; - to_send = (to_send > txlen) ? txlen : to_send; - - if (until_end < to_send) { - /* It's a circ buffer -- wrap around. - * We could do that in one SPI transaction, but meh. */ - max310x_batch_write(port, xmit->buf + xmit->tail, until_end); - max310x_batch_write(port, xmit->buf, to_send - until_end); - } else { - max310x_batch_write(port, xmit->buf + xmit->tail, to_send); - } + if (!txlen) + break; - /* Add data to send */ - port->icount.tx += to_send; - xmit->tail = (xmit->tail + to_send) & (UART_XMIT_SIZE - 1); + to_send = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail, txlen); + max310x_batch_write(port, tail, to_send); + uart_xmit_advance(port, to_send); } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(port); } @@ -812,14 +806,14 @@ static irqreturn_t max310x_port_irq(struct max310x_port *s, int portno) if (ists & MAX310X_IRQ_CTS_BIT) { lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); - uart_handle_cts_change(port, - !!(lsr & MAX310X_LSR_CTS_BIT)); + uart_handle_cts_change(port, lsr & MAX310X_LSR_CTS_BIT); } if (rxlen) max310x_handle_rx(port, rxlen); if (ists & MAX310X_IRQ_TXEMPTY_BIT) max310x_start_tx(port); } while (1); + return res; } @@ -829,17 +823,28 @@ static irqreturn_t max310x_ist(int irq, void *dev_id) bool handled = false; if (s->devtype->nr > 1) { + bool done; + do { unsigned int val = ~0; + unsigned long irq; + unsigned int port; + + done = true; WARN_ON_ONCE(regmap_read(s->regmap, MAX310X_GLOBALIRQ_REG, &val)); - val = ((1 << s->devtype->nr) - 1) & ~val; - if (!val) - break; - if (max310x_port_irq(s, fls(val) - 1) == IRQ_HANDLED) - handled = true; - } while (1); + + irq = val; + + for_each_clear_bit(port, &irq, s->devtype->nr) { + done = false; + + if (max310x_port_irq(s, port) == IRQ_HANDLED) + handled = true; + } + + } while (!done); } else { if (max310x_port_irq(s, 0) == IRQ_HANDLED) handled = true; @@ -864,7 +869,8 @@ static unsigned int max310x_tx_empty(struct uart_port *port) static unsigned int max310x_get_mctrl(struct uart_port *port) { - /* DCD and DSR are not wired and CTS/RTS is handled automatically + /* + * DCD and DSR are not wired and CTS/RTS is handled automatically * so just indicate DSR and CAR asserted */ return TIOCM_DSR | TIOCM_CAR; @@ -896,7 +902,7 @@ static void max310x_break_ctl(struct uart_port *port, int break_state) static void max310x_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned int lcr = 0, flow = 0; int baud; @@ -956,7 +962,8 @@ static void max310x_set_termios(struct uart_port *port, max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]); max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); - /* Disable transmitter before enabling AutoCTS or auto transmitter + /* + * Disable transmitter before enabling AutoCTS or auto transmitter * flow control */ if (termios->c_cflag & CRTSCTS || termios->c_iflag & IXOFF) { @@ -983,7 +990,8 @@ static void max310x_set_termios(struct uart_port *port, } max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow); - /* Enable transmitter after disabling AutoCTS and auto transmitter + /* + * Enable transmitter after disabling AutoCTS and auto transmitter * flow control */ if (!(termios->c_cflag & CRTSCTS) && !(termios->c_iflag & IXOFF)) { @@ -1026,7 +1034,7 @@ static void max310x_rs_proc(struct work_struct *ws) MAX310X_MODE2_ECHOSUPR_BIT, mode2); } -static int max310x_rs485_config(struct uart_port *port, +static int max310x_rs485_config(struct uart_port *port, struct ktermios *termios, struct serial_rs485 *rs485) { struct max310x_one *one = to_max310x_port(port); @@ -1035,9 +1043,6 @@ static int max310x_rs485_config(struct uart_port *port, (rs485->delay_rts_after_send > 0x0f)) return -ERANGE; - rs485->flags &= SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX | - SER_RS485_ENABLED; - memset(rs485->padding, 0, sizeof(rs485->padding)); port->rs485 = *rs485; schedule_work(&one->rs_work); @@ -1047,10 +1052,9 @@ static int max310x_rs485_config(struct uart_port *port, static int max310x_startup(struct uart_port *port) { - struct max310x_port *s = dev_get_drvdata(port->dev); unsigned int val; - s->devtype->power(port, 1); + max310x_power(port, 1); /* Configure MODE1 register */ max310x_port_update(port, MAX310X_MODE1_REG, @@ -1078,8 +1082,11 @@ static int max310x_startup(struct uart_port *port) MAX310X_MODE2_ECHOSUPR_BIT); } - /* Configure flow control levels */ - /* Flow control halt level 96, resume level 48 */ + /* + * Configure flow control levels: + * resume: 48 + * halt: 96 + */ max310x_port_write(port, MAX310X_FLOWLVL_REG, MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96)); @@ -1095,12 +1102,10 @@ static int max310x_startup(struct uart_port *port) static void max310x_shutdown(struct uart_port *port) { - struct max310x_port *s = dev_get_drvdata(port->dev); - /* Disable all interrupts */ max310x_port_write(port, MAX310X_IRQEN_REG, 0); - s->devtype->power(port, 0); + max310x_power(port, 0); } static const char *max310x_type(struct uart_port *port) @@ -1162,7 +1167,7 @@ static int __maybe_unused max310x_suspend(struct device *dev) for (i = 0; i < s->devtype->nr; i++) { uart_suspend_port(&max310x_uart, &s->p[i].port); - s->devtype->power(&s->p[i].port, 0); + max310x_power(&s->p[i].port, 0); } return 0; @@ -1174,7 +1179,7 @@ static int __maybe_unused max310x_resume(struct device *dev) int i; for (i = 0; i < s->devtype->nr; i++) { - s->devtype->power(&s->p[i].port, 1); + max310x_power(&s->p[i].port, 1); uart_resume_port(&max310x_uart, &s->p[i].port); } @@ -1184,7 +1189,7 @@ static int __maybe_unused max310x_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); #ifdef CONFIG_GPIOLIB -static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) +static int max310x_gpio_get(struct gpio_chip *chip, unsigned int offset) { unsigned int val; struct max310x_port *s = gpiochip_get_data(chip); @@ -1195,16 +1200,19 @@ static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) return !!((val >> 4) & (1 << (offset % 4))); } -static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +static int max310x_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) { struct max310x_port *s = gpiochip_get_data(chip); struct uart_port *port = &s->p[offset / 4].port; max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), value ? 1 << (offset % 4) : 0); + + return 0; } -static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) { struct max310x_port *s = gpiochip_get_data(chip); struct uart_port *port = &s->p[offset / 4].port; @@ -1215,7 +1223,7 @@ static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) } static int max310x_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) + unsigned int offset, int value) { struct max310x_port *s = gpiochip_get_data(chip); struct uart_port *port = &s->p[offset / 4].port; @@ -1250,23 +1258,29 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, } #endif +static const struct serial_rs485 max310x_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX, + .delay_rts_before_send = 1, + .delay_rts_after_send = 1, +}; + static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype, - struct regmap *regmap, int irq) + const struct max310x_if_cfg *if_cfg, + struct regmap *regmaps[], int irq) { int i, ret, fmin, fmax, freq; struct max310x_port *s; - u32 uartclk = 0; + s32 uartclk = 0; bool xtal; - if (IS_ERR(regmap)) - return PTR_ERR(regmap); + for (i = 0; i < devtype->nr; i++) + if (IS_ERR(regmaps[i])) + return PTR_ERR(regmaps[i]); /* Alloc port structure */ s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL); - if (!s) { - dev_err(dev, "Error allocating port structure\n"); + if (!s) return -ENOMEM; - } /* Always ask for fixed clock rate from a property. */ device_property_read_u32(dev, "clock-frequency", &uartclk); @@ -1287,8 +1301,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty if (freq == 0) freq = uartclk; if (freq == 0) { - dev_err(dev, "Cannot get clock rate\n"); - ret = -EINVAL; + ret = dev_err_probe(dev, -EINVAL, "Cannot get clock rate\n"); goto out_clk; } @@ -1306,35 +1319,49 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty goto out_clk; } - s->regmap = regmap; + s->regmap = regmaps[0]; s->devtype = devtype; + s->if_cfg = if_cfg; dev_set_drvdata(dev, s); /* Check device to ensure we are talking to what we expect */ - ret = devtype->detect(dev); + ret = max310x_detect(dev); if (ret) goto out_clk; for (i = 0; i < devtype->nr; i++) { - unsigned int offs = i << 5; + bool started = false; + unsigned int try = 0, val = 0; /* Reset port */ - regmap_write(s->regmap, MAX310X_MODE2_REG + offs, + regmap_write(regmaps[i], MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT); /* Clear port reset */ - regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0); + regmap_write(regmaps[i], MAX310X_MODE2_REG, 0); /* Wait for port startup */ do { - regmap_read(s->regmap, - MAX310X_BRGDIVLSB_REG + offs, &ret); - } while (ret != 0x01); + msleep(MAX310X_PORT_STARTUP_WAIT_DELAY_MS); + regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &val); + + if (val == 0x01) + started = true; + } while (!started && (++try < MAX310X_PORT_STARTUP_WAIT_RETRIES)); + + if (!started) { + ret = dev_err_probe(dev, -EAGAIN, "port reset failed\n"); + goto out_uart; + } - regmap_write(s->regmap, MAX310X_MODE1_REG + offs, - devtype->mode1); + regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1); } uartclk = max310x_set_ref_clk(dev, s, freq, xtal); + if (uartclk < 0) { + ret = uartclk; + goto out_uart; + } + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); for (i = 0; i < devtype->nr; i++) { @@ -1354,11 +1381,19 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty s->p[i].port.fifosize = MAX310X_FIFO_SIZE; s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; s->p[i].port.iotype = UPIO_PORT; - s->p[i].port.iobase = i * 0x20; + s->p[i].port.iobase = i; + /* + * Use all ones as membase to make sure uart_configure_port() in + * serial_core.c does not abort for SPI/I2C devices where the + * membase address is not applicable. + */ s->p[i].port.membase = (void __iomem *)~0; s->p[i].port.uartclk = uartclk; s->p[i].port.rs485_config = max310x_rs485_config; + s->p[i].port.rs485_supported = max310x_rs485_supported; s->p[i].port.ops = &max310x_ops; + s->p[i].regmap = regmaps[i]; + /* Disable all interrupts */ max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0); /* Clear IRQ status register */ @@ -1369,25 +1404,20 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty INIT_WORK(&s->p[i].md_work, max310x_md_proc); /* Initialize queue for changing RS485 mode */ INIT_WORK(&s->p[i].rs_work, max310x_rs_proc); - /* Initialize SPI-transfer buffers */ - s->p[i].wr_header = (s->p[i].port.iobase + MAX310X_THR_REG) | - MAX310X_WRITE_BIT; - s->p[i].rd_header = (s->p[i].port.iobase + MAX310X_RHR_REG); /* Register port */ ret = uart_add_one_port(&max310x_uart, &s->p[i].port); - if (ret) { - s->p[i].port.dev = NULL; + if (ret) goto out_uart; - } + set_bit(line, max310x_lines); /* Go to suspend mode */ - devtype->power(&s->p[i].port, 0); + max310x_power(&s->p[i].port, 0); } #ifdef CONFIG_GPIOLIB - /* Setup GPIO cotroller */ + /* Setup GPIO controller */ s->gpio.owner = THIS_MODULE; s->gpio.parent = dev; s->gpio.label = devtype->name; @@ -1410,14 +1440,12 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty if (!ret) return 0; - dev_err(dev, "Unable to reguest IRQ %i\n", irq); + dev_err(dev, "Unable to request IRQ %i\n", irq); out_uart: for (i = 0; i < devtype->nr; i++) { - if (s->p[i].port.dev) { + if (test_and_clear_bit(s->p[i].port.line, max310x_lines)) uart_remove_one_port(&max310x_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, max310x_lines); - } } out_clk: @@ -1435,9 +1463,11 @@ static void max310x_remove(struct device *dev) cancel_work_sync(&s->p[i].tx_work); cancel_work_sync(&s->p[i].md_work); cancel_work_sync(&s->p[i].rs_work); - uart_remove_one_port(&max310x_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, max310x_lines); - s->devtype->power(&s->p[i].port, 0); + + if (test_and_clear_bit(s->p[i].port.line, max310x_lines)) + uart_remove_one_port(&max310x_uart, &s->p[i].port); + + max310x_power(&s->p[i].port, 0); } clk_disable_unprepare(s->clk); @@ -1456,17 +1486,49 @@ static struct regmap_config regcfg = { .reg_bits = 8, .val_bits = 8, .write_flag_mask = MAX310X_WRITE_BIT, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_MAPLE, + .max_register = MAX310X_REG_1F, .writeable_reg = max310x_reg_writeable, .volatile_reg = max310x_reg_volatile, .precious_reg = max310x_reg_precious, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, }; +static const char *max310x_regmap_name(u8 port_id) +{ + switch (port_id) { + case 0: return "port0"; + case 1: return "port1"; + case 2: return "port2"; + case 3: return "port3"; + default: + WARN_ON(true); + return NULL; + } +} + #ifdef CONFIG_SPI_MASTER +static int max310x_spi_extended_reg_enable(struct device *dev, bool enable) +{ + struct max310x_port *s = dev_get_drvdata(dev); + + return regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, + enable ? MAX310X_EXTREG_ENBL : MAX310X_EXTREG_DSBL); +} + +static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = { + .extended_reg_enable = max310x_spi_extended_reg_enable, + .rev_id_offset = MAX310X_EXTREG_START, +}; + static int max310x_spi_probe(struct spi_device *spi) { const struct max310x_devtype *devtype; - struct regmap *regmap; + struct regmap *regmaps[MAX310X_MAX_PORTS]; + unsigned int i; int ret; /* Setup SPI bus */ @@ -1477,20 +1539,25 @@ static int max310x_spi_probe(struct spi_device *spi) if (ret) return ret; - devtype = device_get_match_data(&spi->dev); + devtype = spi_get_device_match_data(spi); if (!devtype) - devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; + return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n"); - regcfg.max_register = devtype->nr * 0x20 - 1; - regmap = devm_regmap_init_spi(spi, ®cfg); + for (i = 0; i < devtype->nr; i++) { + u8 port_mask = i * 0x20; + + regcfg.name = max310x_regmap_name(i); + regcfg.read_flag_mask = port_mask; + regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT; + regmaps[i] = devm_regmap_init_spi(spi, ®cfg); + } - return max310x_probe(&spi->dev, devtype, regmap, spi->irq); + return max310x_probe(&spi->dev, devtype, &max310x_spi_if_cfg, regmaps, spi->irq); } -static int max310x_spi_remove(struct spi_device *spi) +static void max310x_spi_remove(struct spi_device *spi) { max310x_remove(&spi->dev); - return 0; } static const struct spi_device_id max310x_id_table[] = { @@ -1514,6 +1581,116 @@ static struct spi_driver max310x_spi_driver = { }; #endif +#ifdef CONFIG_I2C +static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable) +{ + return 0; +} + +static struct regmap_config regcfg_i2c = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_MAPLE, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, + .max_register = MAX310X_REVID_EXTREG, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, +}; + +static const struct max310x_if_cfg max310x_i2c_if_cfg = { + .extended_reg_enable = max310x_i2c_extended_reg_enable, + .rev_id_offset = 0, /* No offset in I2C mode. */ +}; + +static unsigned short max310x_i2c_slave_addr(unsigned short addr, + unsigned int nr) +{ + /* + * For MAX14830 and MAX3109, the slave address depends on what the + * A0 and A1 pins are tied to. + * See Table I2C Address Map of the datasheet. + * Based on that table, the following formulas were determined: + * UART1 - UART0 = 0x10 + * UART2 - UART1 = 0x20 + 0x10 + * UART3 - UART2 = 0x10 + */ + + addr -= nr * 0x10; + + if (nr >= 2) + addr -= 0x20; + + return addr; +} + +static int max310x_i2c_probe(struct i2c_client *client) +{ + const struct max310x_devtype *devtype; + struct i2c_client *port_client; + struct regmap *regmaps[MAX310X_MAX_PORTS]; + unsigned int i; + u8 port_addr; + + devtype = i2c_get_match_data(client); + if (!devtype) + return dev_err_probe(&client->dev, -ENODEV, "Failed to match device\n"); + + if (client->addr < devtype->slave_addr.min || + client->addr > devtype->slave_addr.max) + return dev_err_probe(&client->dev, -EINVAL, + "Slave addr 0x%x outside of range [0x%x, 0x%x]\n", + client->addr, devtype->slave_addr.min, + devtype->slave_addr.max); + + regcfg_i2c.name = max310x_regmap_name(0); + regmaps[0] = devm_regmap_init_i2c(client, ®cfg_i2c); + + for (i = 1; i < devtype->nr; i++) { + port_addr = max310x_i2c_slave_addr(client->addr, i); + port_client = devm_i2c_new_dummy_device(&client->dev, + client->adapter, + port_addr); + if (IS_ERR(port_client)) + return PTR_ERR(port_client); + + regcfg_i2c.name = max310x_regmap_name(i); + regmaps[i] = devm_regmap_init_i2c(port_client, ®cfg_i2c); + } + + return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg, + regmaps, client->irq); +} + +static void max310x_i2c_remove(struct i2c_client *client) +{ + max310x_remove(&client->dev); +} + +static const struct i2c_device_id max310x_i2c_id_table[] = { + { "max3107", (kernel_ulong_t)&max3107_devtype, }, + { "max3108", (kernel_ulong_t)&max3108_devtype, }, + { "max3109", (kernel_ulong_t)&max3109_devtype, }, + { "max14830", (kernel_ulong_t)&max14830_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max310x_i2c_id_table); + +static struct i2c_driver max310x_i2c_driver = { + .driver = { + .name = MAX310X_NAME, + .of_match_table = max310x_dt_ids, + .pm = &max310x_pm_ops, + }, + .probe = max310x_i2c_probe, + .remove = max310x_i2c_remove, + .id_table = max310x_i2c_id_table, +}; +#endif + static int __init max310x_uart_init(void) { int ret; @@ -1527,15 +1704,35 @@ static int __init max310x_uart_init(void) #ifdef CONFIG_SPI_MASTER ret = spi_register_driver(&max310x_spi_driver); if (ret) - uart_unregister_driver(&max310x_uart); + goto err_spi_register; #endif +#ifdef CONFIG_I2C + ret = i2c_add_driver(&max310x_i2c_driver); + if (ret) + goto err_i2c_register; +#endif + + return 0; + +#ifdef CONFIG_I2C +err_i2c_register: + spi_unregister_driver(&max310x_spi_driver); +#endif + +err_spi_register: + uart_unregister_driver(&max310x_uart); + return ret; } module_init(max310x_uart_init); static void __exit max310x_uart_exit(void) { +#ifdef CONFIG_I2C + i2c_del_driver(&max310x_i2c_driver); +#endif + #ifdef CONFIG_SPI_MASTER spi_unregister_driver(&max310x_spi_driver); #endif |