diff options
Diffstat (limited to 'drivers/tty/serial/mxs-auart.c')
| -rw-r--r-- | drivers/tty/serial/mxs-auart.c | 1179 |
1 files changed, 884 insertions, 295 deletions
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 4f5f161896a1..cc65c9fb6446 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1,17 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Freescale STMP37XX/STMP378X Application UART driver + * Application UART driver for: + * Freescale STMP37XX/STMP378X + * Alphascale ASM9260 * * Author: dmitry pervushin <dimka@embeddedalley.com> * + * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de> + * Provide Alphascale ASM9260 support. * Copyright 2008-2010 Freescale Semiconductor, Inc. * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/kernel.h> @@ -32,39 +30,28 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/pinctrl/consumer.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <asm/cacheflush.h> +#include <linux/gpio/consumer.h> +#include <linux/err.h> +#include <linux/irq.h> +#include "serial_mctrl_gpio.h" #define MXS_AUART_PORTS 5 +#define MXS_AUART_FIFO_SIZE 16 + +#define SET_REG 0x4 +#define CLR_REG 0x8 +#define TOG_REG 0xc #define AUART_CTRL0 0x00000000 -#define AUART_CTRL0_SET 0x00000004 -#define AUART_CTRL0_CLR 0x00000008 -#define AUART_CTRL0_TOG 0x0000000c #define AUART_CTRL1 0x00000010 -#define AUART_CTRL1_SET 0x00000014 -#define AUART_CTRL1_CLR 0x00000018 -#define AUART_CTRL1_TOG 0x0000001c #define AUART_CTRL2 0x00000020 -#define AUART_CTRL2_SET 0x00000024 -#define AUART_CTRL2_CLR 0x00000028 -#define AUART_CTRL2_TOG 0x0000002c #define AUART_LINECTRL 0x00000030 -#define AUART_LINECTRL_SET 0x00000034 -#define AUART_LINECTRL_CLR 0x00000038 -#define AUART_LINECTRL_TOG 0x0000003c #define AUART_LINECTRL2 0x00000040 -#define AUART_LINECTRL2_SET 0x00000044 -#define AUART_LINECTRL2_CLR 0x00000048 -#define AUART_LINECTRL2_TOG 0x0000004c #define AUART_INTR 0x00000050 -#define AUART_INTR_SET 0x00000054 -#define AUART_INTR_CLR 0x00000058 -#define AUART_INTR_TOG 0x0000005c #define AUART_DATA 0x00000060 #define AUART_STAT 0x00000070 #define AUART_DEBUG 0x00000080 @@ -90,14 +77,17 @@ #define AUART_CTRL2_TXE (1 << 8) #define AUART_CTRL2_UARTEN (1 << 0) +#define AUART_LINECTRL_BAUD_DIV_MAX 0x003fffc0 +#define AUART_LINECTRL_BAUD_DIV_MIN 0x000000ec #define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16 #define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000 #define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16) #define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8 #define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00 #define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8) +#define AUART_LINECTRL_SPS (1 << 7) #define AUART_LINECTRL_WLEN_MASK 0x00000060 -#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5) +#define AUART_LINECTRL_WLEN(v) ((((v) - 5) & 0x3) << 5) #define AUART_LINECTRL_FEN (1 << 4) #define AUART_LINECTRL_STP2 (1 << 3) #define AUART_LINECTRL_EPS (1 << 2) @@ -124,27 +114,317 @@ #define AUART_STAT_FERR (1 << 16) #define AUART_STAT_RXCOUNT_MASK 0xffff +/* + * Start of Alphascale asm9260 defines + * This list contains only differences of existing bits + * between imx2x and asm9260 + */ +#define ASM9260_HW_CTRL0 0x0000 +/* + * RW. Tell the UART to execute the RX DMA Command. The + * UART will clear this bit at the end of receive execution. + */ +#define ASM9260_BM_CTRL0_RXDMA_RUN BIT(28) +/* RW. 0 use FIFO for status register; 1 use DMA */ +#define ASM9260_BM_CTRL0_RXTO_SOURCE_STATUS BIT(25) +/* + * RW. RX TIMEOUT Enable. Valid for FIFO and DMA. + * Warning: If this bit is set to 0, the RX timeout will not affect receive DMA + * operation. If this bit is set to 1, a receive timeout will cause the receive + * DMA logic to terminate by filling the remaining DMA bytes with garbage data. + */ +#define ASM9260_BM_CTRL0_RXTO_ENABLE BIT(24) +/* + * RW. Receive Timeout Counter Value: number of 8-bit-time to wait before + * asserting timeout on the RX input. If the RXFIFO is not empty and the RX + * input is idle, then the watchdog counter will decrement each bit-time. Note + * 7-bit-time is added to the programmed value, so a value of zero will set + * the counter to 7-bit-time, a value of 0x1 gives 15-bit-time and so on. Also + * note that the counter is reloaded at the end of each frame, so if the frame + * is 10 bits long and the timeout counter value is zero, then timeout will + * occur (when FIFO is not empty) even if the RX input is not idle. The default + * value is 0x3 (31 bit-time). + */ +#define ASM9260_BM_CTRL0_RXTO_MASK (0xff << 16) +/* TIMEOUT = (100*7+1)*(1/BAUD) */ +#define ASM9260_BM_CTRL0_DEFAULT_RXTIMEOUT (20 << 16) + +/* TX ctrl register */ +#define ASM9260_HW_CTRL1 0x0010 +/* + * RW. Tell the UART to execute the TX DMA Command. The + * UART will clear this bit at the end of transmit execution. + */ +#define ASM9260_BM_CTRL1_TXDMA_RUN BIT(28) + +#define ASM9260_HW_CTRL2 0x0020 +/* + * RW. Receive Interrupt FIFO Level Select. + * The trigger points for the receive interrupt are as follows: + * ONE_EIGHTHS = 0x0 Trigger on FIFO full to at least 2 of 16 entries. + * ONE_QUARTER = 0x1 Trigger on FIFO full to at least 4 of 16 entries. + * ONE_HALF = 0x2 Trigger on FIFO full to at least 8 of 16 entries. + * THREE_QUARTERS = 0x3 Trigger on FIFO full to at least 12 of 16 entries. + * SEVEN_EIGHTHS = 0x4 Trigger on FIFO full to at least 14 of 16 entries. + */ +#define ASM9260_BM_CTRL2_RXIFLSEL (7 << 20) +#define ASM9260_BM_CTRL2_DEFAULT_RXIFLSEL (3 << 20) +/* RW. Same as RXIFLSEL */ +#define ASM9260_BM_CTRL2_TXIFLSEL (7 << 16) +#define ASM9260_BM_CTRL2_DEFAULT_TXIFLSEL (2 << 16) +/* RW. Set DTR. When this bit is 1, the output is 0. */ +#define ASM9260_BM_CTRL2_DTR BIT(10) +/* RW. Loop Back Enable */ +#define ASM9260_BM_CTRL2_LBE BIT(7) +#define ASM9260_BM_CTRL2_PORT_ENABLE BIT(0) + +#define ASM9260_HW_LINECTRL 0x0030 +/* + * RW. Stick Parity Select. When bits 1, 2, and 7 of this register are set, the + * parity bit is transmitted and checked as a 0. When bits 1 and 7 are set, + * and bit 2 is 0, the parity bit is transmitted and checked as a 1. When this + * bit is cleared stick parity is disabled. + */ +#define ASM9260_BM_LCTRL_SPS BIT(7) +/* RW. Word length */ +#define ASM9260_BM_LCTRL_WLEN (3 << 5) +#define ASM9260_BM_LCTRL_CHRL_5 (0 << 5) +#define ASM9260_BM_LCTRL_CHRL_6 (1 << 5) +#define ASM9260_BM_LCTRL_CHRL_7 (2 << 5) +#define ASM9260_BM_LCTRL_CHRL_8 (3 << 5) + +/* + * Interrupt register. + * contains the interrupt enables and the interrupt status bits + */ +#define ASM9260_HW_INTR 0x0040 +/* Tx FIFO EMPTY Raw Interrupt enable */ +#define ASM9260_BM_INTR_TFEIEN BIT(27) +/* Overrun Error Interrupt Enable. */ +#define ASM9260_BM_INTR_OEIEN BIT(26) +/* Break Error Interrupt Enable. */ +#define ASM9260_BM_INTR_BEIEN BIT(25) +/* Parity Error Interrupt Enable. */ +#define ASM9260_BM_INTR_PEIEN BIT(24) +/* Framing Error Interrupt Enable. */ +#define ASM9260_BM_INTR_FEIEN BIT(23) + +/* nUARTDSR Modem Interrupt Enable. */ +#define ASM9260_BM_INTR_DSRMIEN BIT(19) +/* nUARTDCD Modem Interrupt Enable. */ +#define ASM9260_BM_INTR_DCDMIEN BIT(18) +/* nUARTRI Modem Interrupt Enable. */ +#define ASM9260_BM_INTR_RIMIEN BIT(16) +/* Auto-Boud Timeout */ +#define ASM9260_BM_INTR_ABTO BIT(13) +#define ASM9260_BM_INTR_ABEO BIT(12) +/* Tx FIFO EMPTY Raw Interrupt state */ +#define ASM9260_BM_INTR_TFEIS BIT(11) +/* Overrun Error */ +#define ASM9260_BM_INTR_OEIS BIT(10) +/* Break Error */ +#define ASM9260_BM_INTR_BEIS BIT(9) +/* Parity Error */ +#define ASM9260_BM_INTR_PEIS BIT(8) +/* Framing Error */ +#define ASM9260_BM_INTR_FEIS BIT(7) +#define ASM9260_BM_INTR_DSRMIS BIT(3) +#define ASM9260_BM_INTR_DCDMIS BIT(2) +#define ASM9260_BM_INTR_RIMIS BIT(0) + +/* + * RW. In DMA mode, up to 4 Received/Transmit characters can be accessed at a + * time. In PIO mode, only one character can be accessed at a time. The status + * register contains the receive data flags and valid bits. + */ +#define ASM9260_HW_DATA 0x0050 + +#define ASM9260_HW_STAT 0x0060 +/* RO. If 1, UARTAPP is present in this product. */ +#define ASM9260_BM_STAT_PRESENT BIT(31) +/* RO. If 1, HISPEED is present in this product. */ +#define ASM9260_BM_STAT_HISPEED BIT(30) +/* RO. Receive FIFO Full. */ +#define ASM9260_BM_STAT_RXFULL BIT(26) + +/* RO. The UART Debug Register contains the state of the DMA signals. */ +#define ASM9260_HW_DEBUG 0x0070 +/* DMA Command Run Status */ +#define ASM9260_BM_DEBUG_TXDMARUN BIT(5) +#define ASM9260_BM_DEBUG_RXDMARUN BIT(4) +/* DMA Command End Status */ +#define ASM9260_BM_DEBUG_TXCMDEND BIT(3) +#define ASM9260_BM_DEBUG_RXCMDEND BIT(2) +/* DMA Request Status */ +#define ASM9260_BM_DEBUG_TXDMARQ BIT(1) +#define ASM9260_BM_DEBUG_RXDMARQ BIT(0) + +#define ASM9260_HW_ILPR 0x0080 + +#define ASM9260_HW_RS485CTRL 0x0090 +/* + * RW. This bit reverses the polarity of the direction control signal on the RTS + * (or DTR) pin. + * If 0, The direction control pin will be driven to logic ‘0’ when the + * transmitter has data to be sent. It will be driven to logic ‘1’ after the + * last bit of data has been transmitted. + */ +#define ASM9260_BM_RS485CTRL_ONIV BIT(5) +/* RW. Enable Auto Direction Control. */ +#define ASM9260_BM_RS485CTRL_DIR_CTRL BIT(4) +/* + * RW. If 0 and DIR_CTRL = 1, pin RTS is used for direction control. + * If 1 and DIR_CTRL = 1, pin DTR is used for direction control. + */ +#define ASM9260_BM_RS485CTRL_PINSEL BIT(3) +/* RW. Enable Auto Address Detect (AAD). */ +#define ASM9260_BM_RS485CTRL_AADEN BIT(2) +/* RW. Disable receiver. */ +#define ASM9260_BM_RS485CTRL_RXDIS BIT(1) +/* RW. Enable RS-485/EIA-485 Normal Multidrop Mode (NMM) */ +#define ASM9260_BM_RS485CTRL_RS485EN BIT(0) + +#define ASM9260_HW_RS485ADRMATCH 0x00a0 +/* Contains the address match value. */ +#define ASM9260_BM_RS485ADRMATCH_MASK (0xff << 0) + +#define ASM9260_HW_RS485DLY 0x00b0 +/* + * RW. Contains the direction control (RTS or DTR) delay value. This delay time + * is in periods of the baud clock. + */ +#define ASM9260_BM_RS485DLY_MASK (0xff << 0) + +#define ASM9260_HW_AUTOBAUD 0x00c0 +/* WO. Auto-baud time-out interrupt clear bit. */ +#define ASM9260_BM_AUTOBAUD_TO_INT_CLR BIT(9) +/* WO. End of auto-baud interrupt clear bit. */ +#define ASM9260_BM_AUTOBAUD_EO_INT_CLR BIT(8) +/* Restart in case of timeout (counter restarts at next UART Rx falling edge) */ +#define ASM9260_BM_AUTOBAUD_AUTORESTART BIT(2) +/* Auto-baud mode select bit. 0 - Mode 0, 1 - Mode 1. */ +#define ASM9260_BM_AUTOBAUD_MODE BIT(1) +/* + * Auto-baud start (auto-baud is running). Auto-baud run bit. This bit is + * automatically cleared after auto-baud completion. + */ +#define ASM9260_BM_AUTOBAUD_START BIT(0) + +#define ASM9260_HW_CTRL3 0x00d0 +#define ASM9260_BM_CTRL3_OUTCLK_DIV_MASK (0xffff << 16) +/* + * RW. Provide clk over OUTCLK pin. In case of asm9260 it can be configured on + * pins 137 and 144. + */ +#define ASM9260_BM_CTRL3_MASTERMODE BIT(6) +/* RW. Baud Rate Mode: 1 - Enable sync mode. 0 - async mode. */ +#define ASM9260_BM_CTRL3_SYNCMODE BIT(4) +/* RW. 1 - MSB bit send frist; 0 - LSB bit frist. */ +#define ASM9260_BM_CTRL3_MSBF BIT(2) +/* RW. 1 - sample rate = 8 x Baudrate; 0 - sample rate = 16 x Baudrate. */ +#define ASM9260_BM_CTRL3_BAUD8 BIT(1) +/* RW. 1 - Set word length to 9bit. 0 - use ASM9260_BM_LCTRL_WLEN */ +#define ASM9260_BM_CTRL3_9BIT BIT(0) + +#define ASM9260_HW_ISO7816_CTRL 0x00e0 +/* RW. Enable High Speed mode. */ +#define ASM9260_BM_ISO7816CTRL_HS BIT(12) +/* Disable Successive Receive NACK */ +#define ASM9260_BM_ISO7816CTRL_DS_NACK BIT(8) +#define ASM9260_BM_ISO7816CTRL_MAX_ITER_MASK (0xff << 4) +/* Receive NACK Inhibit */ +#define ASM9260_BM_ISO7816CTRL_INACK BIT(3) +#define ASM9260_BM_ISO7816CTRL_NEG_DATA BIT(2) +/* RW. 1 - ISO7816 mode; 0 - USART mode */ +#define ASM9260_BM_ISO7816CTRL_ENABLE BIT(0) + +#define ASM9260_HW_ISO7816_ERRCNT 0x00f0 +/* Parity error counter. Will be cleared after reading */ +#define ASM9260_BM_ISO7816_NB_ERRORS_MASK (0xff << 0) + +#define ASM9260_HW_ISO7816_STATUS 0x0100 +/* Max number of Repetitions Reached */ +#define ASM9260_BM_ISO7816_STAT_ITERATION BIT(0) + +/* End of Alphascale asm9260 defines */ + static struct uart_driver auart_driver; enum mxs_auart_type { IMX23_AUART, IMX28_AUART, + ASM9260_AUART, +}; + +struct vendor_data { + const u16 *reg_offset; +}; + +enum { + REG_CTRL0, + REG_CTRL1, + REG_CTRL2, + REG_LINECTRL, + REG_LINECTRL2, + REG_INTR, + REG_DATA, + REG_STAT, + REG_DEBUG, + REG_VERSION, + REG_AUTOBAUD, + + /* The size of the array - must be last */ + REG_ARRAY_SIZE, +}; + +static const u16 mxs_asm9260_offsets[REG_ARRAY_SIZE] = { + [REG_CTRL0] = ASM9260_HW_CTRL0, + [REG_CTRL1] = ASM9260_HW_CTRL1, + [REG_CTRL2] = ASM9260_HW_CTRL2, + [REG_LINECTRL] = ASM9260_HW_LINECTRL, + [REG_INTR] = ASM9260_HW_INTR, + [REG_DATA] = ASM9260_HW_DATA, + [REG_STAT] = ASM9260_HW_STAT, + [REG_DEBUG] = ASM9260_HW_DEBUG, + [REG_AUTOBAUD] = ASM9260_HW_AUTOBAUD, +}; + +static const u16 mxs_stmp37xx_offsets[REG_ARRAY_SIZE] = { + [REG_CTRL0] = AUART_CTRL0, + [REG_CTRL1] = AUART_CTRL1, + [REG_CTRL2] = AUART_CTRL2, + [REG_LINECTRL] = AUART_LINECTRL, + [REG_LINECTRL2] = AUART_LINECTRL2, + [REG_INTR] = AUART_INTR, + [REG_DATA] = AUART_DATA, + [REG_STAT] = AUART_STAT, + [REG_DEBUG] = AUART_DEBUG, + [REG_VERSION] = AUART_VERSION, + [REG_AUTOBAUD] = AUART_AUTOBAUD, +}; + +static const struct vendor_data vendor_alphascale_asm9260 = { + .reg_offset = mxs_asm9260_offsets, +}; + +static const struct vendor_data vendor_freescale_stmp37xx = { + .reg_offset = mxs_stmp37xx_offsets, }; struct mxs_auart_port { struct uart_port port; -#define MXS_AUART_DMA_CONFIG 0x1 #define MXS_AUART_DMA_ENABLED 0x2 #define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ #define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ +#define MXS_AUART_RTSCTS 4 /* bit 4 */ unsigned long flags; - unsigned int ctrl; + unsigned int mctrl_prev; enum mxs_auart_type devtype; - - unsigned int irq; + const struct vendor_data *vendor; struct clk *clk; + struct clk *clk_ahb; struct device *dev; /* for DMA */ @@ -155,22 +435,22 @@ struct mxs_auart_port { struct scatterlist rx_sgl; struct dma_chan *rx_dma_chan; void *rx_dma_buf; -}; -static struct platform_device_id mxs_auart_devtype[] = { - { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART }, - { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART }, - { /* sentinel */ } + struct mctrl_gpios *gpios; + int gpio_irq[UART_GPIO_MAX]; + bool ms_irq_enabled; }; -MODULE_DEVICE_TABLE(platform, mxs_auart_devtype); -static struct of_device_id mxs_auart_dt_ids[] = { +static const struct of_device_id mxs_auart_dt_ids[] = { { .compatible = "fsl,imx28-auart", - .data = &mxs_auart_devtype[IMX28_AUART] + .data = (const void *)IMX28_AUART }, { .compatible = "fsl,imx23-auart", - .data = &mxs_auart_devtype[IMX23_AUART] + .data = (const void *)IMX23_AUART + }, { + .compatible = "alphascale,asm9260-auart", + .data = (const void *)ASM9260_AUART }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); @@ -180,11 +460,54 @@ static inline int is_imx28_auart(struct mxs_auart_port *s) return s->devtype == IMX28_AUART; } +static inline int is_asm9260_auart(struct mxs_auart_port *s) +{ + return s->devtype == ASM9260_AUART; +} + static inline bool auart_dma_enabled(struct mxs_auart_port *s) { return s->flags & MXS_AUART_DMA_ENABLED; } +static unsigned int mxs_reg_to_offset(const struct mxs_auart_port *uap, + unsigned int reg) +{ + return uap->vendor->reg_offset[reg]; +} + +static unsigned int mxs_read(const struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + return readl_relaxed(addr); +} + +static void mxs_write(unsigned int val, struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + writel_relaxed(val, addr); +} + +static void mxs_set(unsigned int val, struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + writel_relaxed(val, addr + SET_REG); +} + +static void mxs_clr(unsigned int val, struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + writel_relaxed(val, addr + CLR_REG); +} + static void mxs_auart_stop_tx(struct uart_port *u); #define to_auart_port(u) container_of(u, struct mxs_auart_port, port) @@ -194,16 +517,16 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s); static void dma_tx_callback(void *param) { struct mxs_auart_port *s = param; - struct circ_buf *xmit = &s->port.state->xmit; + struct tty_port *tport = &s->port.state->port; dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE); /* clear the bit used to serialize the DMA tx. */ clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); /* wake up the possible processes. */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(&s->port); mxs_auart_tx_chars(s); @@ -245,81 +568,51 @@ static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size) static void mxs_auart_tx_chars(struct mxs_auart_port *s) { - struct circ_buf *xmit = &s->port.state->xmit; + struct tty_port *tport = &s->port.state->port; + bool pending; + u8 ch; if (auart_dma_enabled(s)) { u32 i = 0; - int size; void *buffer = s->tx_dma_buf; if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags)) return; - while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { - size = min_t(u32, UART_XMIT_SIZE - i, - CIRC_CNT_TO_END(xmit->head, - xmit->tail, - UART_XMIT_SIZE)); - memcpy(buffer + i, xmit->buf + xmit->tail, size); - xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1); - - i += size; - if (i >= UART_XMIT_SIZE) - break; - } - if (uart_tx_stopped(&s->port)) mxs_auart_stop_tx(&s->port); + else + i = kfifo_out(&tport->xmit_fifo, buffer, + UART_XMIT_SIZE); if (i) { mxs_auart_dma_tx(s, i); } else { clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); } return; } - - while (!(readl(s->port.membase + AUART_STAT) & - AUART_STAT_TXFF)) { - if (s->port.x_char) { - s->port.icount.tx++; - writel(s->port.x_char, - s->port.membase + AUART_DATA); - s->port.x_char = 0; - continue; - } - if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { - s->port.icount.tx++; - writel(xmit->buf[xmit->tail], - s->port.membase + AUART_DATA); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else - break; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); - - if (uart_circ_empty(&(s->port.state->xmit))) - writel(AUART_INTR_TXIEN, - s->port.membase + AUART_INTR_CLR); + pending = uart_port_tx_flags(&s->port, ch, UART_TX_NOSTOP, + !(mxs_read(s, REG_STAT) & AUART_STAT_TXFF), + mxs_write(ch, s, REG_DATA)); + if (pending) + mxs_set(AUART_INTR_TXIEN, s, REG_INTR); else - writel(AUART_INTR_TXIEN, - s->port.membase + AUART_INTR_SET); + mxs_clr(AUART_INTR_TXIEN, s, REG_INTR); if (uart_tx_stopped(&s->port)) - mxs_auart_stop_tx(&s->port); + mxs_auart_stop_tx(&s->port); } static void mxs_auart_rx_char(struct mxs_auart_port *s) { - int flag; u32 stat; - u8 c; + u8 c, flag; - c = readl(s->port.membase + AUART_DATA); - stat = readl(s->port.membase + AUART_STAT); + c = mxs_read(s, REG_DATA); + stat = mxs_read(s, REG_STAT); flag = TTY_NORMAL; s->port.icount.rx++; @@ -354,7 +647,7 @@ static void mxs_auart_rx_char(struct mxs_auart_port *s) uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag); out: - writel(stat, s->port.membase + AUART_STAT); + mxs_write(stat, s, REG_STAT); } static void mxs_auart_rx_chars(struct mxs_auart_port *s) @@ -362,13 +655,13 @@ static void mxs_auart_rx_chars(struct mxs_auart_port *s) u32 stat = 0; for (;;) { - stat = readl(s->port.membase + AUART_STAT); + stat = mxs_read(s, REG_STAT); if (stat & AUART_STAT_RXFE) break; mxs_auart_rx_char(s); } - writel(stat, s->port.membase + AUART_STAT); + mxs_write(stat, s, REG_STAT); tty_flip_buffer_push(&s->port.state->port); } @@ -404,35 +697,112 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) { struct mxs_auart_port *s = to_auart_port(u); - u32 ctrl = readl(u->membase + AUART_CTRL2); + u32 ctrl = mxs_read(s, REG_CTRL2); ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { - if (tty_port_cts_enabled(&u->state->port)) + if (uart_cts_enabled(u)) ctrl |= AUART_CTRL2_RTSEN; else ctrl |= AUART_CTRL2_RTS; } - s->ctrl = mctrl; - writel(ctrl, u->membase + AUART_CTRL2); + mxs_write(ctrl, s, REG_CTRL2); + + mctrl_gpio_set(s->gpios, mctrl); +} + +#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS) +static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl) +{ + u32 mctrl_diff; + + mctrl_diff = mctrl ^ s->mctrl_prev; + s->mctrl_prev = mctrl; + if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled && + s->port.state != NULL) { + if (mctrl_diff & TIOCM_RI) + s->port.icount.rng++; + if (mctrl_diff & TIOCM_DSR) + s->port.icount.dsr++; + if (mctrl_diff & TIOCM_CD) + uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD); + if (mctrl_diff & TIOCM_CTS) + uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS); + + wake_up_interruptible(&s->port.state->port.delta_msr_wait); + } + return mctrl; } static u32 mxs_auart_get_mctrl(struct uart_port *u) { struct mxs_auart_port *s = to_auart_port(u); - u32 stat = readl(u->membase + AUART_STAT); - int ctrl2 = readl(u->membase + AUART_CTRL2); - u32 mctrl = s->ctrl; + u32 stat = mxs_read(s, REG_STAT); + u32 mctrl = 0; - mctrl &= ~TIOCM_CTS; if (stat & AUART_STAT_CTS) mctrl |= TIOCM_CTS; - if (ctrl2 & AUART_CTRL2_RTS) - mctrl |= TIOCM_RTS; + return mctrl_gpio_get(s->gpios, &mctrl); +} - return mctrl; +/* + * Enable modem status interrupts + */ +static void mxs_auart_enable_ms(struct uart_port *port) +{ + struct mxs_auart_port *s = to_auart_port(port); + + /* + * Interrupt should not be enabled twice + */ + if (s->ms_irq_enabled) + return; + + s->ms_irq_enabled = true; + + if (s->gpio_irq[UART_GPIO_CTS] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_CTS]); + /* TODO: enable AUART_INTR_CTSMIEN otherwise */ + + if (s->gpio_irq[UART_GPIO_DSR] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_DSR]); + + if (s->gpio_irq[UART_GPIO_RI] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_RI]); + + if (s->gpio_irq[UART_GPIO_DCD] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_DCD]); +} + +/* + * Disable modem status interrupts + */ +static void mxs_auart_disable_ms(struct uart_port *port) +{ + struct mxs_auart_port *s = to_auart_port(port); + + /* + * Interrupt should not be disabled twice + */ + if (!s->ms_irq_enabled) + return; + + s->ms_irq_enabled = false; + + if (s->gpio_irq[UART_GPIO_CTS] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_CTS]); + /* TODO: disable AUART_INTR_CTSMIEN otherwise */ + + if (s->gpio_irq[UART_GPIO_DSR] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_DSR]); + + if (s->gpio_irq[UART_GPIO_RI] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_RI]); + + if (s->gpio_irq[UART_GPIO_DCD] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_DCD]); } static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s); @@ -445,14 +815,14 @@ static void dma_rx_callback(void *arg) dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE); - stat = readl(s->port.membase + AUART_STAT); + stat = mxs_read(s, REG_STAT); stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR | AUART_STAT_PERR | AUART_STAT_FERR); count = stat & AUART_STAT_RXCOUNT_MASK; tty_insert_flip_string(port, s->rx_dma_buf, count); - writel(stat, s->port.membase + AUART_STAT); + mxs_write(stat, s, REG_STAT); tty_flip_buffer_push(port); /* start the next DMA for RX. */ @@ -515,8 +885,8 @@ static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s) static void mxs_auart_dma_exit(struct mxs_auart_port *s) { - writel(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR, - s->port.membase + AUART_CTRL2_CLR); + mxs_clr(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR, + s, REG_CTRL2); mxs_auart_dma_exit_channel(s); s->flags &= ~MXS_AUART_DMA_ENABLED; @@ -526,21 +896,27 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s) static int mxs_auart_dma_init(struct mxs_auart_port *s) { + struct dma_chan *chan; + if (auart_dma_enabled(s)) return 0; /* init for RX */ - s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx"); - if (!s->rx_dma_chan) + chan = dma_request_chan(s->dev, "rx"); + if (IS_ERR(chan)) goto err_out; + s->rx_dma_chan = chan; + s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); if (!s->rx_dma_buf) goto err_out; /* init for TX */ - s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx"); - if (!s->tx_dma_chan) + chan = dma_request_chan(s->dev, "tx"); + if (IS_ERR(chan)) goto err_out; + s->tx_dma_chan = chan; + s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); if (!s->tx_dma_buf) goto err_out; @@ -549,6 +925,9 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s) s->flags |= MXS_AUART_DMA_ENABLED; dev_dbg(s->dev, "enabled the DMA support."); + /* The DMA buffer is now the FIFO the TTY subsystem can use */ + s->port.fifosize = UART_XMIT_SIZE; + return 0; err_out: @@ -557,51 +936,37 @@ err_out: } +#define RTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_RTS) +#define CTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_CTS) static void mxs_auart_settermios(struct uart_port *u, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct mxs_auart_port *s = to_auart_port(u); - u32 bm, ctrl, ctrl2, div; - unsigned int cflag, baud; + u32 ctrl, ctrl2, div; + unsigned int cflag, baud, baud_min, baud_max; cflag = termios->c_cflag; ctrl = AUART_LINECTRL_FEN; - ctrl2 = readl(u->membase + AUART_CTRL2); - - /* byte size */ - switch (cflag & CSIZE) { - case CS5: - bm = 0; - break; - case CS6: - bm = 1; - break; - case CS7: - bm = 2; - break; - case CS8: - bm = 3; - break; - default: - return; - } + ctrl2 = mxs_read(s, REG_CTRL2); - ctrl |= AUART_LINECTRL_WLEN(bm); + ctrl |= AUART_LINECTRL_WLEN(tty_get_char_size(cflag)); /* parity */ if (cflag & PARENB) { ctrl |= AUART_LINECTRL_PEN; if ((cflag & PARODD) == 0) ctrl |= AUART_LINECTRL_EPS; + if (cflag & CMSPAR) + ctrl |= AUART_LINECTRL_SPS; } - u->read_status_mask = 0; + u->read_status_mask = AUART_STAT_OERR; if (termios->c_iflag & INPCK) u->read_status_mask |= AUART_STAT_PERR; - if (termios->c_iflag & (BRKINT | PARMRK)) + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) u->read_status_mask |= AUART_STAT_BERR; /* @@ -633,6 +998,7 @@ static void mxs_auart_settermios(struct uart_port *u, ctrl |= AUART_LINECTRL_STP2; /* figure out the hardware flow control settings */ + ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); if (cflag & CRTSCTS) { /* * The DMA has a bug(see errata:2836) in mx23. @@ -640,25 +1006,39 @@ static void mxs_auart_settermios(struct uart_port *u, * we can only implement the DMA support for auart * in mx28. */ - if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG)) { + if (is_imx28_auart(s) + && test_bit(MXS_AUART_RTSCTS, &s->flags)) { if (!mxs_auart_dma_init(s)) /* enable DMA tranfer */ ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR; } - ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; - } else { - ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); + /* Even if RTS is GPIO line RTSEN can be enabled because + * the pinctrl configuration decides about RTS pin function */ + ctrl2 |= AUART_CTRL2_RTSEN; + if (CTS_AT_AUART()) + ctrl2 |= AUART_CTRL2_CTSEN; } /* set baud rate */ - baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); - div = u->uartclk * 32 / baud; + if (is_asm9260_auart(s)) { + baud = uart_get_baud_rate(u, termios, old, + u->uartclk * 4 / 0x3FFFFF, + u->uartclk / 16); + div = u->uartclk * 4 / baud; + } else { + baud_min = DIV_ROUND_UP(u->uartclk * 32, + AUART_LINECTRL_BAUD_DIV_MAX); + baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN; + baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max); + div = DIV_ROUND_CLOSEST(u->uartclk * 32, baud); + } + ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F); ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6); + mxs_write(ctrl, s, REG_LINECTRL); - writel(ctrl, u->membase + AUART_LINECTRL); - writel(ctrl2, u->membase + AUART_CTRL2); + mxs_write(ctrl2, s, REG_CTRL2); uart_update_timeout(u, termios->c_cflag, baud); @@ -667,27 +1047,62 @@ static void mxs_auart_settermios(struct uart_port *u, !test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) { if (!mxs_auart_dma_prep_rx(s)) { /* Disable the normal RX interrupt. */ - writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN, - u->membase + AUART_INTR_CLR); + mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN, + s, REG_INTR); } else { mxs_auart_dma_exit(s); dev_err(s->dev, "We can not start up the DMA.\n"); } } + + /* CTS flow-control and modem-status interrupts */ + if (UART_ENABLE_MS(u, termios->c_cflag)) + mxs_auart_enable_ms(u); + else + mxs_auart_disable_ms(u); +} + +static void mxs_auart_set_ldisc(struct uart_port *port, + struct ktermios *termios) +{ + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + mxs_auart_enable_ms(port); + } else { + port->flags &= ~UPF_HARDPPS_CD; + } } static irqreturn_t mxs_auart_irq_handle(int irq, void *context) { - u32 istatus, istat; + u32 istat, stat; struct mxs_auart_port *s = context; - u32 stat = readl(s->port.membase + AUART_STAT); + u32 mctrl_temp = s->mctrl_prev; + + uart_port_lock(&s->port); + + stat = mxs_read(s, REG_STAT); + istat = mxs_read(s, REG_INTR); - istatus = istat = readl(s->port.membase + AUART_INTR); + /* ack irq */ + mxs_clr(istat & (AUART_INTR_RTIS | AUART_INTR_TXIS | AUART_INTR_RXIS + | AUART_INTR_CTSMIS), s, REG_INTR); + + /* + * Dealing with GPIO interrupt + */ + if (irq == s->gpio_irq[UART_GPIO_CTS] || + irq == s->gpio_irq[UART_GPIO_DCD] || + irq == s->gpio_irq[UART_GPIO_DSR] || + irq == s->gpio_irq[UART_GPIO_RI]) + mxs_auart_modem_status(s, + mctrl_gpio_get(s->gpios, &mctrl_temp)); if (istat & AUART_INTR_CTSMIS) { - uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS); - writel(AUART_INTR_CTSMIS, - s->port.membase + AUART_INTR_CLR); + if (CTS_AT_AUART() && s->ms_irq_enabled) + uart_handle_cts_change(&s->port, + stat & AUART_STAT_CTS); + mxs_clr(AUART_INTR_CTSMIS, s, REG_INTR); istat &= ~AUART_INTR_CTSMIS; } @@ -702,50 +1117,86 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) istat &= ~AUART_INTR_TXIS; } - writel(istatus & (AUART_INTR_RTIS - | AUART_INTR_TXIS - | AUART_INTR_RXIS - | AUART_INTR_CTSMIS), - s->port.membase + AUART_INTR_CLR); + uart_port_unlock(&s->port); return IRQ_HANDLED; } -static void mxs_auart_reset(struct uart_port *u) +static void mxs_auart_reset_deassert(struct mxs_auart_port *s) { int i; unsigned int reg; - writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_CLR); + mxs_clr(AUART_CTRL0_SFTRST, s, REG_CTRL0); for (i = 0; i < 10000; i++) { - reg = readl(u->membase + AUART_CTRL0); + reg = mxs_read(s, REG_CTRL0); if (!(reg & AUART_CTRL0_SFTRST)) break; udelay(3); } - writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); +} + +static void mxs_auart_reset_assert(struct mxs_auart_port *s) +{ + int i; + u32 reg; + + reg = mxs_read(s, REG_CTRL0); + /* if already in reset state, keep it untouched */ + if (reg & AUART_CTRL0_SFTRST) + return; + + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + mxs_set(AUART_CTRL0_SFTRST, s, REG_CTRL0); + + for (i = 0; i < 1000; i++) { + reg = mxs_read(s, REG_CTRL0); + /* reset is finished when the clock is gated */ + if (reg & AUART_CTRL0_CLKGATE) + return; + udelay(10); + } + + dev_err(s->dev, "Failed to reset the unit."); } static int mxs_auart_startup(struct uart_port *u) { + int ret; struct mxs_auart_port *s = to_auart_port(u); - clk_prepare_enable(s->clk); + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; - writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); + if (uart_console(u)) { + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + } else { + /* reset the unit to a well known state */ + mxs_auart_reset_assert(s); + mxs_auart_reset_deassert(s); + } + + mxs_set(AUART_CTRL2_UARTEN, s, REG_CTRL2); - writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET); + mxs_write(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, + s, REG_INTR); - writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, - u->membase + AUART_INTR); + /* Reset FIFO size (it could have changed if DMA was enabled) */ + u->fifosize = MXS_AUART_FIFO_SIZE; /* * Enable fifo so all four bytes of a DMA word are written to * output (otherwise, only the LSB is written, ie. 1 in 4 bytes) */ - writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET); + mxs_set(AUART_LINECTRL_FEN, s, REG_LINECTRL); + + /* get initial status of modem lines */ + mctrl_gpio_get(s->gpios, &s->mctrl_prev); + s->ms_irq_enabled = false; return 0; } @@ -753,25 +1204,33 @@ static void mxs_auart_shutdown(struct uart_port *u) { struct mxs_auart_port *s = to_auart_port(u); + mxs_auart_disable_ms(u); + if (auart_dma_enabled(s)) mxs_auart_dma_exit(s); - writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR); - - writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, - u->membase + AUART_INTR_CLR); + if (uart_console(u)) { + mxs_clr(AUART_CTRL2_UARTEN, s, REG_CTRL2); - writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET); + mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN | + AUART_INTR_CTSMIEN, s, REG_INTR); + mxs_set(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + } else { + mxs_auart_reset_assert(s); + } clk_disable_unprepare(s->clk); } static unsigned int mxs_auart_tx_empty(struct uart_port *u) { - if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE) + struct mxs_auart_port *s = to_auart_port(u); + + if ((mxs_read(s, REG_STAT) & + (AUART_STAT_TXFE | AUART_STAT_BUSY)) == AUART_STAT_TXFE) return TIOCSER_TEMT; - else - return 0; + + return 0; } static void mxs_auart_start_tx(struct uart_port *u) @@ -779,37 +1238,36 @@ static void mxs_auart_start_tx(struct uart_port *u) struct mxs_auart_port *s = to_auart_port(u); /* enable transmitter */ - writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_SET); + mxs_set(AUART_CTRL2_TXE, s, REG_CTRL2); mxs_auart_tx_chars(s); } static void mxs_auart_stop_tx(struct uart_port *u) { - writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_CLR); + struct mxs_auart_port *s = to_auart_port(u); + + mxs_clr(AUART_CTRL2_TXE, s, REG_CTRL2); } static void mxs_auart_stop_rx(struct uart_port *u) { - writel(AUART_CTRL2_RXE, u->membase + AUART_CTRL2_CLR); + struct mxs_auart_port *s = to_auart_port(u); + + mxs_clr(AUART_CTRL2_RXE, s, REG_CTRL2); } static void mxs_auart_break_ctl(struct uart_port *u, int ctl) { + struct mxs_auart_port *s = to_auart_port(u); + if (ctl) - writel(AUART_LINECTRL_BRK, - u->membase + AUART_LINECTRL_SET); + mxs_set(AUART_LINECTRL_BRK, s, REG_LINECTRL); else - writel(AUART_LINECTRL_BRK, - u->membase + AUART_LINECTRL_CLR); + mxs_clr(AUART_LINECTRL_BRK, s, REG_LINECTRL); } -static void mxs_auart_enable_ms(struct uart_port *port) -{ - /* just empty */ -} - -static struct uart_ops mxs_auart_ops = { +static const struct uart_ops mxs_auart_ops = { .tx_empty = mxs_auart_tx_empty, .start_tx = mxs_auart_start_tx, .stop_tx = mxs_auart_stop_tx, @@ -821,6 +1279,7 @@ static struct uart_ops mxs_auart_ops = { .startup = mxs_auart_startup, .shutdown = mxs_auart_shutdown, .set_termios = mxs_auart_settermios, + .set_ldisc = mxs_auart_set_ldisc, .type = mxs_auart_type, .release_port = mxs_auart_release_port, .request_port = mxs_auart_request_port, @@ -831,17 +1290,18 @@ static struct uart_ops mxs_auart_ops = { static struct mxs_auart_port *auart_port[MXS_AUART_PORTS]; #ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE -static void mxs_auart_console_putchar(struct uart_port *port, int ch) +static void mxs_auart_console_putchar(struct uart_port *port, unsigned char ch) { + struct mxs_auart_port *s = to_auart_port(port); unsigned int to = 1000; - while (readl(port->membase + AUART_STAT) & AUART_STAT_TXFF) { + while (mxs_read(s, REG_STAT) & AUART_STAT_TXFF) { if (!to--) break; udelay(1); } - writel(ch, port->membase + AUART_DATA); + mxs_write(ch, s, REG_DATA); } static void @@ -850,7 +1310,7 @@ auart_console_write(struct console *co, const char *str, unsigned int count) struct mxs_auart_port *s; struct uart_port *port; unsigned int old_ctrl0, old_ctrl2; - unsigned int to = 1000; + unsigned int to = 20000; if (co->index >= MXS_AUART_PORTS || co->index < 0) return; @@ -861,42 +1321,46 @@ auart_console_write(struct console *co, const char *str, unsigned int count) clk_enable(s->clk); /* First save the CR then disable the interrupts */ - old_ctrl2 = readl(port->membase + AUART_CTRL2); - old_ctrl0 = readl(port->membase + AUART_CTRL0); + old_ctrl2 = mxs_read(s, REG_CTRL2); + old_ctrl0 = mxs_read(s, REG_CTRL0); - writel(AUART_CTRL0_CLKGATE, - port->membase + AUART_CTRL0_CLR); - writel(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, - port->membase + AUART_CTRL2_SET); + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + mxs_set(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, s, REG_CTRL2); uart_console_write(port, str, count, mxs_auart_console_putchar); - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) { + /* Finally, wait for transmitter to become empty ... */ + while (mxs_read(s, REG_STAT) & AUART_STAT_BUSY) { + udelay(1); if (!to--) break; - udelay(1); } - writel(old_ctrl0, port->membase + AUART_CTRL0); - writel(old_ctrl2, port->membase + AUART_CTRL2); + /* + * ... and restore the TCR if we waited long enough for the transmitter + * to be idle. This might keep the transmitter enabled although it is + * unused, but that is better than to disable it while it is still + * transmitting. + */ + if (!(mxs_read(s, REG_STAT) & AUART_STAT_BUSY)) { + mxs_write(old_ctrl0, s, REG_CTRL0); + mxs_write(old_ctrl2, s, REG_CTRL2); + } clk_disable(s->clk); } static void __init -auart_console_get_options(struct uart_port *port, int *baud, +auart_console_get_options(struct mxs_auart_port *s, int *baud, int *parity, int *bits) { + struct uart_port *port = &s->port; unsigned int lcr_h, quot; - if (!(readl(port->membase + AUART_CTRL2) & AUART_CTRL2_UARTEN)) + if (!(mxs_read(s, REG_CTRL2) & AUART_CTRL2_UARTEN)) return; - lcr_h = readl(port->membase + AUART_LINECTRL); + lcr_h = mxs_read(s, REG_LINECTRL); *parity = 'n'; if (lcr_h & AUART_LINECTRL_PEN) { @@ -906,17 +1370,15 @@ auart_console_get_options(struct uart_port *port, int *baud, *parity = 'o'; } - if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2)) + if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(7)) *bits = 7; else *bits = 8; - quot = ((readl(port->membase + AUART_LINECTRL) - & AUART_LINECTRL_BAUD_DIVINT_MASK)) - >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6); - quot |= ((readl(port->membase + AUART_LINECTRL) - & AUART_LINECTRL_BAUD_DIVFRAC_MASK)) - >> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT; + quot = ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVINT_MASK)) + >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6); + quot |= ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVFRAC_MASK)) + >> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT; if (quot == 0) quot = 1; @@ -944,12 +1406,14 @@ auart_console_setup(struct console *co, char *options) if (!s) return -ENODEV; - clk_prepare_enable(s->clk); + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - auart_console_get_options(&s->port, &baud, &parity, &bits); + auart_console_get_options(s, &baud, &parity, &bits); ret = uart_set_options(&s->port, co, baud, parity, bits, flow); @@ -981,135 +1445,261 @@ static struct uart_driver auart_driver = { #endif }; -/* - * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it - * could successfully get all information from dt or a negative errno. - */ -static int serial_mxs_probe_dt(struct mxs_auart_port *s, - struct platform_device *pdev) +static void mxs_init_regs(struct mxs_auart_port *s) { - struct device_node *np = pdev->dev.of_node; - int ret; + if (is_asm9260_auart(s)) + s->vendor = &vendor_alphascale_asm9260; + else + s->vendor = &vendor_freescale_stmp37xx; +} - if (!np) - /* no device tree device */ - return 1; +static int mxs_get_clks(struct mxs_auart_port *s, + struct platform_device *pdev) +{ + int err; - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); - return ret; + if (!is_asm9260_auart(s)) { + s->clk = devm_clk_get(&pdev->dev, NULL); + return PTR_ERR_OR_ZERO(s->clk); + } + + s->clk = devm_clk_get(s->dev, "mod"); + if (IS_ERR(s->clk)) { + dev_err(s->dev, "Failed to get \"mod\" clk\n"); + return PTR_ERR(s->clk); + } + + s->clk_ahb = devm_clk_get(s->dev, "ahb"); + if (IS_ERR(s->clk_ahb)) { + dev_err(s->dev, "Failed to get \"ahb\" clk\n"); + return PTR_ERR(s->clk_ahb); } - s->port.line = ret; - s->flags |= MXS_AUART_DMA_CONFIG; + err = clk_prepare_enable(s->clk_ahb); + if (err) { + dev_err(s->dev, "Failed to enable ahb_clk!\n"); + return err; + } + + err = clk_set_rate(s->clk, clk_get_rate(s->clk_ahb)); + if (err) { + dev_err(s->dev, "Failed to set rate!\n"); + goto disable_clk_ahb; + } + + err = clk_prepare_enable(s->clk); + if (err) { + dev_err(s->dev, "Failed to enable clk!\n"); + goto disable_clk_ahb; + } return 0; + +disable_clk_ahb: + clk_disable_unprepare(s->clk_ahb); + return err; +} + +static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev) +{ + enum mctrl_gpio_idx i; + struct gpio_desc *gpiod; + + s->gpios = mctrl_gpio_init_noauto(dev, 0); + if (IS_ERR(s->gpios)) + return PTR_ERR(s->gpios); + + /* Block (enabled before) DMA option if RTS or CTS is GPIO line */ + if (!RTS_AT_AUART() || !CTS_AT_AUART()) { + if (test_bit(MXS_AUART_RTSCTS, &s->flags)) + dev_warn(dev, + "DMA and flow control via gpio may cause some problems. DMA disabled!\n"); + clear_bit(MXS_AUART_RTSCTS, &s->flags); + } + + for (i = 0; i < UART_GPIO_MAX; i++) { + gpiod = mctrl_gpio_to_gpiod(s->gpios, i); + if (gpiod && (gpiod_get_direction(gpiod) == 1)) + s->gpio_irq[i] = gpiod_to_irq(gpiod); + else + s->gpio_irq[i] = -EINVAL; + } + + return 0; +} + +static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s) +{ + enum mctrl_gpio_idx i; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (s->gpio_irq[i] >= 0) + free_irq(s->gpio_irq[i], s); +} + +static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s) +{ + int *irq = s->gpio_irq; + enum mctrl_gpio_idx i; + int err = 0; + + for (i = 0; (i < UART_GPIO_MAX) && !err; i++) { + if (irq[i] < 0) + continue; + + irq_set_status_flags(irq[i], IRQ_NOAUTOEN); + err = request_irq(irq[i], mxs_auart_irq_handle, + IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s); + if (err) + dev_err(s->dev, "%s - Can't get %d irq\n", + __func__, irq[i]); + } + + /* + * If something went wrong, rollback. + * Be careful: i may be unsigned. + */ + while (err && (i-- > 0)) + if (irq[i] >= 0) + free_irq(irq[i], s); + + return err; } static int mxs_auart_probe(struct platform_device *pdev) { - const struct of_device_id *of_id = - of_match_device(mxs_auart_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; struct mxs_auart_port *s; u32 version; - int ret = 0; + int ret, irq; struct resource *r; - struct pinctrl *pinctrl; - s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); - if (!s) { - ret = -ENOMEM; - goto out; - } + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; - ret = serial_mxs_probe_dt(s, pdev); - if (ret > 0) - s->port.line = pdev->id < 0 ? 0 : pdev->id; - else if (ret < 0) - goto out_free; + s->port.dev = &pdev->dev; + s->dev = &pdev->dev; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); - goto out_free; + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); + return ret; } + s->port.line = ret; - if (of_id) { - pdev->id_entry = of_id->data; - s->devtype = pdev->id_entry->driver_data; - } + if (of_property_read_bool(np, "uart-has-rtscts") || + of_property_read_bool(np, "fsl,uart-has-rtscts") /* deprecated */) + set_bit(MXS_AUART_RTSCTS, &s->flags); - s->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(s->clk)) { - ret = PTR_ERR(s->clk); - goto out_free; + if (s->port.line >= ARRAY_SIZE(auart_port)) { + dev_err(&pdev->dev, "serial%d out of range\n", s->port.line); + return -EINVAL; } + s->devtype = (enum mxs_auart_type)of_device_get_match_data(&pdev->dev); + + ret = mxs_get_clks(s, pdev); + if (ret) + return ret; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { ret = -ENXIO; - goto out_free_clk; + goto out_disable_clks; } s->port.mapbase = r->start; s->port.membase = ioremap(r->start, resource_size(r)); + if (!s->port.membase) { + ret = -ENOMEM; + goto out_disable_clks; + } s->port.ops = &mxs_auart_ops; s->port.iotype = UPIO_MEM; - s->port.fifosize = 16; + s->port.fifosize = MXS_AUART_FIFO_SIZE; s->port.uartclk = clk_get_rate(s->clk); s->port.type = PORT_IMX; - s->port.dev = s->dev = &pdev->dev; + s->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_MXS_AUART_CONSOLE); + + mxs_init_regs(s); - s->ctrl = 0; + s->mctrl_prev = 0; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto out_iounmap; + } - s->irq = platform_get_irq(pdev, 0); - s->port.irq = s->irq; - ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s); + s->port.irq = irq; + ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0, + dev_name(&pdev->dev), s); if (ret) - goto out_free_clk; + goto out_iounmap; platform_set_drvdata(pdev, s); + ret = mxs_auart_init_gpios(s, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize GPIOs.\n"); + goto out_iounmap; + } + + /* + * Get the GPIO lines IRQ + */ + ret = mxs_auart_request_gpio_irq(s); + if (ret) + goto out_iounmap; + auart_port[s->port.line] = s; - mxs_auart_reset(&s->port); + mxs_auart_reset_deassert(s); ret = uart_add_one_port(&auart_driver, &s->port); if (ret) - goto out_free_irq; + goto out_free_qpio_irq; - version = readl(s->port.membase + AUART_VERSION); - dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n", - (version >> 24) & 0xff, - (version >> 16) & 0xff, version & 0xffff); + /* ASM9260 don't have version reg */ + if (is_asm9260_auart(s)) { + dev_info(&pdev->dev, "Found APPUART ASM9260\n"); + } else { + version = mxs_read(s, REG_VERSION); + dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n", + (version >> 24) & 0xff, + (version >> 16) & 0xff, version & 0xffff); + } return 0; -out_free_irq: +out_free_qpio_irq: + mxs_auart_free_gpio_irq(s); auart_port[pdev->id] = NULL; - free_irq(s->irq, s); -out_free_clk: - clk_put(s->clk); -out_free: - kfree(s); -out: + +out_iounmap: + iounmap(s->port.membase); + +out_disable_clks: + if (is_asm9260_auart(s)) { + clk_disable_unprepare(s->clk); + clk_disable_unprepare(s->clk_ahb); + } return ret; } -static int mxs_auart_remove(struct platform_device *pdev) +static void mxs_auart_remove(struct platform_device *pdev) { struct mxs_auart_port *s = platform_get_drvdata(pdev); uart_remove_one_port(&auart_driver, &s->port); - auart_port[pdev->id] = NULL; - - clk_put(s->clk); - free_irq(s->irq, s); - kfree(s); - - return 0; + mxs_auart_free_gpio_irq(s); + iounmap(s->port.membase); + if (is_asm9260_auart(s)) { + clk_disable_unprepare(s->clk); + clk_disable_unprepare(s->clk_ahb); + } } static struct platform_driver mxs_auart_driver = { @@ -1117,7 +1707,6 @@ static struct platform_driver mxs_auart_driver = { .remove = mxs_auart_remove, .driver = { .name = "mxs-auart", - .owner = THIS_MODULE, .of_match_table = mxs_auart_dt_ids, }, }; |