diff options
Diffstat (limited to 'drivers/usb/dwc3/Kconfig')
| -rw-r--r-- | drivers/usb/dwc3/Kconfig | 124 |
1 files changed, 106 insertions, 18 deletions
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 1a0404fda596..bf3e04635131 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,12 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 + config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB || USB_GADGET) && HAS_DMA + depends on (EXTCON || EXTCON=n) select USB_XHCI_PLATFORM if USB_XHCI_HCD + select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE help Say Y or M here if your system has a Dual Role SuperSpeed USB controller based on the DesignWare USB3 IP Core. - If you choose to build this driver is a dynamically linked + If you choose to build this driver as a dynamically linked module, the module will be called dwc3.ko. if USB_DWC3 @@ -19,7 +23,7 @@ config USB_DWC3_ULPI controller. choice - bool "DWC3 Mode Selection" + prompt "DWC3 Mode Selection" default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET) default USB_DWC3_HOST if (USB && !USB_GADGET) default USB_DWC3_GADGET if (!USB && USB_GADGET) @@ -41,7 +45,6 @@ config USB_DWC3_GADGET config USB_DWC3_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) - depends on (EXTCON=y || EXTCON=USB_DWC3) help This is the default mode of working of DWC3 controller where both host and gadget features are enabled. @@ -52,7 +55,8 @@ comment "Platform Glue Driver Support" config USB_DWC3_OMAP tristate "Texas Instruments OMAP5 and similar Platforms" - depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST) + depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on EXTCON || !EXTCON depends on OF default USB_DWC3 help @@ -62,12 +66,13 @@ config USB_DWC3_OMAP Say 'Y' or 'M' here if you have one such device config USB_DWC3_EXYNOS - tristate "Samsung Exynos Platform" + tristate "Samsung Exynos SoC Platform" depends on (ARCH_EXYNOS || COMPILE_TEST) && OF default USB_DWC3 help - Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside, - say 'Y' or 'M' if you have one such device. + Recent Samsung Exynos SoCs (Exynos5250, Exynos5410, Exynos542x, + Exynos5800, Exynos5433, Exynos7) ship with one DesignWare Core USB3 + IP inside, say 'Y' or 'M' if you have one such device. config USB_DWC3_PCI tristate "PCIe-based Platforms" @@ -86,21 +91,32 @@ config USB_DWC3_HAPS platform, please say 'Y' or 'M' here. config USB_DWC3_KEYSTONE - tristate "Texas Instruments Keystone2 Platforms" - depends on ARCH_KEYSTONE || COMPILE_TEST + tristate "Texas Instruments Keystone2/AM654 Platforms" + depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST default USB_DWC3 help - Support of USB2/3 functionality in TI Keystone2 platforms. + Support of USB2/3 functionality in TI Keystone2 and AM654 platforms. Say 'Y' or 'M' here if you have one such device +config USB_DWC3_MESON_G12A + tristate "Amlogic Meson G12A Platforms" + depends on OF && COMMON_CLK + depends on ARCH_MESON || COMPILE_TEST + default USB_DWC3 + select USB_ROLE_SWITCH + select REGMAP_MMIO + help + Support USB2/3 functionality in Amlogic G12A platforms. + Say 'Y' or 'M' if you have one such device. + config USB_DWC3_OF_SIMPLE - tristate "Generic OF Simple Glue Layer" - depends on OF && COMMON_CLK - default USB_DWC3 - help - Support USB2/3 functionality in simple SoC integrations. - Currently supports Xilinx and Qualcomm DWC USB3 IP. - Say 'Y' or 'M' if you have one such device. + tristate "Generic OF Simple Glue Layer" + depends on OF && COMMON_CLK + default USB_DWC3 + help + Support USB2/3 functionality in simple SoC integrations. + Currently supports Xilinx and Qualcomm DWC USB3 IP. + Say 'Y' or 'M' if you have one such device. config USB_DWC3_ST tristate "STMicroelectronics Platforms" @@ -113,7 +129,8 @@ config USB_DWC3_ST config USB_DWC3_QCOM tristate "Qualcomm Platform" - depends on EXTCON && (ARCH_QCOM || COMPILE_TEST) + depends on ARCH_QCOM || COMPILE_TEST + depends on EXTCON || !EXTCON depends on OF default USB_DWC3 help @@ -123,4 +140,75 @@ config USB_DWC3_QCOM for peripheral mode support. Say 'Y' or 'M' if you have one such device. +config USB_DWC3_IMX8MP + tristate "NXP iMX8MP Platform" + depends on OF && COMMON_CLK + depends on (ARCH_MXC && ARM64) || COMPILE_TEST + default USB_DWC3 + help + NXP iMX8M Plus SoC use DesignWare Core IP for USB2/3 + functionality. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_XILINX + tristate "Xilinx Platforms" + depends on (ARCH_ZYNQMP || COMPILE_TEST) && OF + default USB_DWC3 + help + Support Xilinx SoCs with DesignWare Core USB3 IP. + This driver handles ZynqMP SoC operations. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_AM62 + tristate "Texas Instruments AM62 Platforms" + depends on ARCH_K3 || COMPILE_TEST + default USB_DWC3 + help + Support TI's AM62 platforms with DesignWare Core USB3 IP. + The Designware Core USB3 IP is programmed to operate in + in USB 2.0 mode only. + Say 'Y' or 'M' here if you have one such device + +config USB_DWC3_OCTEON + tristate "Cavium Octeon Platforms" + depends on CAVIUM_OCTEON_SOC || COMPILE_TEST + default USB_DWC3 + help + Support Cavium Octeon platforms with DesignWare Core USB3 IP. + Only the host mode is currently supported. + Say 'Y' or 'M' here if you have one such device. + +config USB_DWC3_RTK + tristate "Realtek DWC3 Platform Driver" + depends on OF && ARCH_REALTEK + default USB_DWC3 + select USB_ROLE_SWITCH + help + RTK DHC RTD SoCs with DesignWare Core USB3 IP inside, + and IP Core configured for USB 2.0 and USB 3.0 in host + or dual-role mode. + Say 'Y' or 'M' if you have such device. + +config USB_DWC3_GENERIC_PLAT + tristate "DWC3 Generic Platform Driver" + depends on OF && COMMON_CLK + default USB_DWC3 + help + Support USB3 functionality in simple SoC integrations. + Currently supports SpacemiT DWC USB3. Platforms using + dwc3-of-simple can easily switch to dwc3-generic by flattening + the dwc3 child node in the device tree. + Say 'Y' or 'M' here if your platform integrates DWC3 in a similar way. + +config USB_DWC3_APPLE + tristate "Apple Silicon DWC3 Platform Driver" + depends on OF && ARCH_APPLE + default USB_DWC3 + select USB_ROLE_SWITCH + help + Support Apple Silicon SoCs with DesignWare Core USB3 IP. + The DesignWare Core USB3 IP has to be used in dual-role + mode on these machines. + Say 'Y' or 'M' if you have such device. + endif |