diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 2017 |
1 files changed, 1483 insertions, 534 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a1b126f90261..ec8407972b9d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * core.c - DesignWare USB3 DRD Controller Core file * - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com * * Authors: Felipe Balbi <balbi@ti.com>, * Sebastian Andrzej Siewior <bigeasy@linutronix.de> @@ -23,9 +23,13 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/of.h> +#include <linux/of_graph.h> #include <linux/acpi.h> +#include <linux/pci.h> #include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/devinfo.h> #include <linux/reset.h> +#include <linux/bitfield.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -34,9 +38,11 @@ #include "core.h" #include "gadget.h" +#include "glue.h" #include "io.h" #include "debug.h" +#include "../host/xhci-ext-caps.h" #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ @@ -84,8 +90,10 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) * mode. If the controller supports DRD but the dr_mode is not * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && - dwc->revision >= DWC3_REVISION_330A) + if (mode == USB_DR_MODE_OTG && !dwc->edev && + (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || + !device_property_read_bool(dwc->dev, "usb-role-switch")) && + !DWC3_VER_IS_PRIOR(DWC3, 330A)) mode = USB_DR_MODE_PERIPHERAL; } @@ -100,38 +108,87 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) return 0; } -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable) +{ + u32 reg; + int i; + + for (i = 0; i < dwc->num_usb3_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i)); + if (enable && !dwc->dis_u3_susphy_quirk) + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + else + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg); + } + + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + if (enable && !dwc->dis_u2_susphy_quirk) + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + else + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } +} +EXPORT_SYMBOL_GPL(dwc3_enable_susphy); + +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy) { + unsigned int hw_mode; u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); + + /* + * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE and + * GUSB2PHYCFG.SUSPHY should be cleared during mode switching, + * and they can be set after core initialization. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !ignore_susphy) { + if (DWC3_GCTL_PRTCAP(reg) != mode) + dwc3_enable_susphy(dwc, false); + } + reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); dwc->current_dr_role = mode; + trace_dwc3_set_prtcap(mode); } +EXPORT_SYMBOL_GPL(dwc3_set_prtcap); static void __dwc3_set_mode(struct work_struct *work) { struct dwc3 *dwc = work_to_dwc(work); unsigned long flags; int ret; + u32 reg; + u32 desired_dr_role; + int i; - if (dwc->dr_mode != USB_DR_MODE_OTG) - return; + mutex_lock(&dwc->mutex); + spin_lock_irqsave(&dwc->lock, flags); + desired_dr_role = dwc->desired_dr_role; + spin_unlock_irqrestore(&dwc->lock, flags); + + pm_runtime_get_sync(dwc->dev); if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG) dwc3_otg_update(dwc, 0); - if (!dwc->desired_dr_role) - return; + if (!desired_dr_role) + goto out; - if (dwc->desired_dr_role == dwc->current_dr_role) - return; + if (desired_dr_role == dwc->current_dr_role) + goto out; - if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev) - return; + if (desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev) + goto out; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_HOST: @@ -152,13 +209,37 @@ static void __dwc3_set_mode(struct work_struct *work) break; } + /* + * When current_dr_role is not set, there's no role switching. + * Only perform GCTL.CoreSoftReset when there's DRD role switching. + */ + if (dwc->current_dr_role && ((DWC3_IP_IS(DWC3) || + DWC3_VER_IS_PRIOR(DWC31, 190A)) && + desired_dr_role != DWC3_GCTL_PRTCAP_OTG)) { + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* + * Wait for internal clocks to synchronized. DWC_usb31 and + * DWC_usb32 may need at least 50ms (less for DWC_usb3). To + * keep it consistent across different IPs, let's wait up to + * 100ms before clearing GCTL.CORESOFTRESET. + */ + msleep(100); + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + } + spin_lock_irqsave(&dwc->lock, flags); - dwc3_set_prtcap(dwc, dwc->desired_dr_role); + dwc3_set_prtcap(dwc, desired_dr_role, false); spin_unlock_irqrestore(&dwc->lock, flags); - switch (dwc->desired_dr_role) { + switch (desired_dr_role) { case DWC3_GCTL_PRTCAP_HOST: ret = dwc3_host_init(dwc); if (ret) { @@ -166,18 +247,28 @@ static void __dwc3_set_mode(struct work_struct *work) } else { if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); - phy_calibrate(dwc->usb2_generic_phy); + + for (i = 0; i < dwc->num_usb2_ports; i++) + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb3_ports; i++) + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); + + if (dwc->dis_split_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); + reg |= DWC3_GUCTL3_SPLITDISABLE; + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg); + } } break; case DWC3_GCTL_PRTCAP_DEVICE: + dwc3_core_soft_reset(dwc); + dwc3_event_buffers_setup(dwc); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) @@ -191,12 +282,18 @@ static void __dwc3_set_mode(struct work_struct *work) break; } +out: + pm_runtime_put_autosuspend(dwc->dev); + mutex_unlock(&dwc->mutex); } void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { unsigned long flags; + if (dwc->dr_mode != USB_DR_MODE_OTG) + return; + spin_lock_irqsave(&dwc->lock, flags); dwc->desired_dr_role = mode; spin_unlock_irqrestore(&dwc->lock, flags); @@ -222,23 +319,10 @@ u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type) * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ -static int dwc3_core_soft_reset(struct dwc3 *dwc) +int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; - int ret; - - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - return ret; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - return ret; - } /* * We're resetting only the device side because, if we're in host mode, @@ -250,39 +334,44 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + reg &= ~DWC3_DCTL_RUN_STOP; + dwc3_gadget_dctl_write_safe(dwc, reg); + + /* + * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit + * is cleared only after all the clocks are synchronized. This can + * take a little more than 50ms. Set the polling rate at 20ms + * for 10 times instead. + */ + if (DWC3_VER_IS_WITHIN(DWC31, 190A, ANY) || DWC3_IP_IS(DWC32)) + retries = 10; do { reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (!(reg & DWC3_DCTL_CSFTRST)) goto done; - udelay(1); + if (DWC3_VER_IS_WITHIN(DWC31, 190A, ANY) || DWC3_IP_IS(DWC32)) + msleep(20); + else + udelay(1); } while (--retries); - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); - + dev_warn(dwc->dev, "DWC3 controller soft reset failed.\n"); return -ETIMEDOUT; done: /* - * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared, - * we must wait at least 50ms before accessing the PHY domain - * (synchronization delay). DWC_usb31 programming guide section 1.3.2. + * For DWC_usb31 controller 1.80a and prior, once DCTL.CSFRST bit + * is cleared, we must wait at least 50ms before accessing the PHY + * domain (synchronization delay). */ - if (dwc3_is_usb31(dwc)) + if (DWC3_VER_IS_WITHIN(DWC31, ANY, 180A)) msleep(50); return 0; } -static const struct clk_bulk_data dwc3_core_clks[] = { - { .id = "ref" }, - { .id = "bus_early" }, - { .id = "suspend" }, -}; - /* * dwc3_frame_length_adjustment - Adjusts frame length if required * @dwc3: Pointer to our controller context structure @@ -292,7 +381,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc) u32 reg; u32 dft; - if (dwc->revision < DWC3_REVISION_250A) + if (DWC3_VER_IS_PRIOR(DWC3, 250A)) return; if (dwc->fladj == 0) @@ -300,8 +389,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GFLADJ); dft = reg & DWC3_GFLADJ_30MHZ_MASK; - if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj, - "request value same as default, ignoring\n")) { + if (dft != dwc->fladj) { reg &= ~DWC3_GFLADJ_30MHZ_MASK; reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj; dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); @@ -309,6 +397,79 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc) } /** + * dwc3_ref_clk_period - Reference clock period configuration + * Default reference clock period depends on hardware + * configuration. For systems with reference clock that differs + * from the default, this will set clock period in DWC3_GUCTL + * register. + * @dwc: Pointer to our controller context structure + */ +static void dwc3_ref_clk_period(struct dwc3 *dwc) +{ + unsigned long period; + unsigned long fladj; + unsigned long decr; + unsigned long rate; + u32 reg; + + if (dwc->ref_clk) { + rate = clk_get_rate(dwc->ref_clk); + if (!rate) + return; + period = NSEC_PER_SEC / rate; + } else if (dwc->ref_clk_per) { + period = dwc->ref_clk_per; + rate = NSEC_PER_SEC / period; + } else { + return; + } + + reg = dwc3_readl(dwc->regs, DWC3_GUCTL); + reg &= ~DWC3_GUCTL_REFCLKPER_MASK; + reg |= FIELD_PREP(DWC3_GUCTL_REFCLKPER_MASK, period); + dwc3_writel(dwc->regs, DWC3_GUCTL, reg); + + if (DWC3_VER_IS_PRIOR(DWC3, 250A)) + return; + + /* + * The calculation below is + * + * 125000 * (NSEC_PER_SEC / (rate * period) - 1) + * + * but rearranged for fixed-point arithmetic. The division must be + * 64-bit because 125000 * NSEC_PER_SEC doesn't fit in 32 bits (and + * neither does rate * period). + * + * Note that rate * period ~= NSEC_PER_SECOND, minus the number of + * nanoseconds of error caused by the truncation which happened during + * the division when calculating rate or period (whichever one was + * derived from the other). We first calculate the relative error, then + * scale it to units of 8 ppm. + */ + fladj = div64_u64(125000ULL * NSEC_PER_SEC, (u64)rate * period); + fladj -= 125000; + + /* + * The documented 240MHz constant is scaled by 2 to get PLS1 as well. + */ + decr = 480000000 / rate; + + reg = dwc3_readl(dwc->regs, DWC3_GFLADJ); + reg &= ~DWC3_GFLADJ_REFCLK_FLADJ_MASK + & ~DWC3_GFLADJ_240MHZDECR + & ~DWC3_GFLADJ_240MHZDECR_PLS1; + reg |= FIELD_PREP(DWC3_GFLADJ_REFCLK_FLADJ_MASK, fladj) + | FIELD_PREP(DWC3_GFLADJ_240MHZDECR, decr >> 1) + | FIELD_PREP(DWC3_GFLADJ_240MHZDECR_PLS1, decr & 1); + + if (dwc->gfladj_refclk_lpm_sel) + reg |= DWC3_GFLADJ_REFCLK_LPM_SEL; + + dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); +} + +/** * dwc3_free_one_event_buffer - Frees one event buffer * @dwc: Pointer to our controller context structure * @evt: Pointer to event buffer to be freed @@ -328,7 +489,7 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc, * otherwise ERR_PTR(errno). */ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, - unsigned length) + unsigned int length) { struct dwc3_event_buffer *evt; @@ -371,9 +532,16 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) * Returns 0 on success otherwise negative errno. In the error case, dwc * may contain some buffers allocated but not all which were requested. */ -static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) +static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length) { struct dwc3_event_buffer *evt; + unsigned int hw_mode; + + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + dwc->ev_buf = NULL; + return 0; + } evt = dwc3_alloc_one_event_buffer(dwc, length); if (IS_ERR(evt)) { @@ -394,6 +562,10 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) int dwc3_event_buffers_setup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; + u32 reg; + + if (!dwc->ev_buf) + return 0; evt = dwc->ev_buf; evt->lpos = 0; @@ -403,14 +575,27 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc) upper_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_SIZE(evt->length)); - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0); + /* Clear any stale event */ + reg = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), reg); return 0; } void dwc3_event_buffers_cleanup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; + u32 reg; + + if (!dwc->ev_buf) + return; + /* + * Exynos platforms may not be able to access event buffer if the + * controller failed to halt on dwc3_core_exit(). + */ + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (!(reg & DWC3_DSTS_DEVCTRLHLT)) + return; evt = dwc->ev_buf; @@ -420,91 +605,10 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0); dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK | DWC3_GEVNTSIZ_SIZE(0)); - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0); -} - -static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) -{ - if (!dwc->has_hibernation) - return 0; - - if (!dwc->nr_scratch) - return 0; - - dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, - DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); - if (!dwc->scratchbuf) - return -ENOMEM; - - return 0; -} - -static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) -{ - dma_addr_t scratch_addr; - u32 param; - int ret; - - if (!dwc->has_hibernation) - return 0; - - if (!dwc->nr_scratch) - return 0; - - /* should never fall here */ - if (!WARN_ON(dwc->scratchbuf)) - return 0; - - scratch_addr = dma_map_single(dwc->sysdev, dwc->scratchbuf, - dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, - DMA_BIDIRECTIONAL); - if (dma_mapping_error(dwc->sysdev, scratch_addr)) { - dev_err(dwc->sysdev, "failed to map scratch buffer\n"); - ret = -EFAULT; - goto err0; - } - - dwc->scratch_addr = scratch_addr; - - param = lower_32_bits(scratch_addr); - - ret = dwc3_send_gadget_generic_command(dwc, - DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); - if (ret < 0) - goto err1; - - param = upper_32_bits(scratch_addr); - - ret = dwc3_send_gadget_generic_command(dwc, - DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); - if (ret < 0) - goto err1; - - return 0; - -err1: - dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch * - DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); - -err0: - return ret; -} - -static void dwc3_free_scratch_buffers(struct dwc3 *dwc) -{ - if (!dwc->has_hibernation) - return; - - if (!dwc->nr_scratch) - return; - - /* should never fall here */ - if (!WARN_ON(dwc->scratchbuf)) - return; - dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch * - DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); - kfree(dwc->scratchbuf); + /* Clear any stale event */ + reg = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), reg); } static void dwc3_core_num_eps(struct dwc3 *dwc) @@ -527,6 +631,21 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); + + if (DWC3_IP_IS(DWC32)) + parms->hwparams9 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS9); +} + +static void dwc3_config_soc_bus(struct dwc3 *dwc) +{ + if (dwc->gsbuscfg0_reqinfo != DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED) { + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); + reg &= ~DWC3_GSBUSCFG0_REQINFO(~0); + reg |= DWC3_GSBUSCFG0_REQINFO(dwc->gsbuscfg0_reqinfo); + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); + } } static int dwc3_core_ulpi_init(struct dwc3 *dwc) @@ -545,19 +664,11 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) return ret; } -/** - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core - * @dwc: Pointer to our controller context structure - * - * Returns 0 on success. The USB PHY interfaces are configured but not - * initialized. The PHY interfaces and the PHYs get initialized together with - * the core in dwc3_core_init. - */ -static int dwc3_phy_setup(struct dwc3 *dwc) +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) { u32 reg; - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index)); /* * Make sure UX_EXIT_PX is cleared as that causes issues with some @@ -565,14 +676,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc) */ reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; - /* - * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY - * to '0' during coreConsultant configuration. So default value - * will be '0' when the core is reset. Application needs to set it - * to '1' after the core initialization is completed. - */ - if (dwc->revision > DWC3_REVISION_194A) - reg |= DWC3_GUSB3PIPECTL_SUSPHY; + /* Ensure the GUSB3PIPECTL.SUSPENDENABLE is cleared prior to phy init. */ + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; if (dwc->u2ss_inp3_quirk) reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; @@ -598,15 +703,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->tx_de_emphasis_quirk) reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); - if (dwc->dis_u3_susphy_quirk) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; - if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg); + + return 0; +} + +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) +{ + u32 reg; - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index)); /* Select the HS PHY interface */ switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { @@ -618,15 +727,14 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } else if (dwc->hsphy_interface && !strncmp(dwc->hsphy_interface, "ulpi", 4)) { reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); } else { /* Relying on default value. */ if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) break; } - /* FALLTHROUGH */ + fallthrough; case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: - /* FALLTHROUGH */ default: break; } @@ -648,63 +756,249 @@ static int dwc3_phy_setup(struct dwc3 *dwc) break; } - /* - * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to - * '0' during coreConsultant configuration. So default value will - * be '0' when the core is reset. Application needs to set it to - * '1' after the core initialization is completed. - */ - if (dwc->revision > DWC3_REVISION_194A) - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + /* Ensure the GUSB2PHYCFG.SUSPHY is cleared prior to phy init. */ + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; else reg |= DWC3_GUSB2PHYCFG_ENBLSLPM; - if (dwc->dis_u2_freeclk_exists_quirk) + if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + /* + * Some ULPI USB PHY does not support internal VBUS supply, to drive + * the CPEN pin requires the configuration of the ULPI DRVVBUSEXTERNAL + * bit of OTG_CTRL register. Controller configures the USB2 PHY + * ULPIEXTVBUSDRV bit[17] of the GUSB2PHYCFG register to drive vBus + * with an external supply. + */ + if (dwc->ulpi_ext_vbus_drv) + reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); return 0; } -static void dwc3_core_exit(struct dwc3 *dwc) +/** + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core + * @dwc: Pointer to our controller context structure + * + * Returns 0 on success. The USB PHY interfaces are configured but not + * initialized. The PHY interfaces and the PHYs get initialized together with + * the core in dwc3_core_init. + */ +static int dwc3_phy_setup(struct dwc3 *dwc) { - dwc3_event_buffers_cleanup(dwc); + int i; + int ret; + + for (i = 0; i < dwc->num_usb3_ports; i++) { + ret = dwc3_ss_phy_setup(dwc, i); + if (ret) + return ret; + } + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = dwc3_hs_phy_setup(dwc, i); + if (ret) + return ret; + } + + return 0; +} + +static int dwc3_phy_init(struct dwc3 *dwc) +{ + int ret; + int i; + int j; + + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_init(dwc->usb2_generic_phy[i]); + if (ret < 0) + goto err_exit_usb2_phy; + } + + for (j = 0; j < dwc->num_usb3_ports; j++) { + ret = phy_init(dwc->usb3_generic_phy[j]); + if (ret < 0) + goto err_exit_usb3_phy; + } + + /* + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY to '0' during + * coreConsultant configuration. So default value will be '0' when the + * core is reset. Application needs to set it to '1' after the core + * initialization is completed. + * + * Certain phy requires to be in P0 power state during initialization. + * Make sure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are clear + * prior to phy init to maintain in the P0 state. + * + * After phy initialization, some phy operations can only be executed + * while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and + * GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid + * blocking phy ops. + */ + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) + dwc3_enable_susphy(dwc, true); + + return 0; + +err_exit_usb3_phy: + while (--j >= 0) + phy_exit(dwc->usb3_generic_phy[j]); + +err_exit_usb2_phy: + while (--i >= 0) + phy_exit(dwc->usb2_generic_phy[i]); + + usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); + + return ret; +} + +static void dwc3_phy_exit(struct dwc3 *dwc) +{ + int i; + + for (i = 0; i < dwc->num_usb3_ports; i++) + phy_exit(dwc->usb3_generic_phy[i]); + + for (i = 0; i < dwc->num_usb2_ports; i++) + phy_exit(dwc->usb2_generic_phy[i]); + usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); +} + +static int dwc3_phy_power_on(struct dwc3 *dwc) +{ + int ret; + int i; + int j; + usb_phy_set_suspend(dwc->usb2_phy, 0); + usb_phy_set_suspend(dwc->usb3_phy, 0); + + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_power_on(dwc->usb2_generic_phy[i]); + if (ret < 0) + goto err_power_off_usb2_phy; + } + + for (j = 0; j < dwc->num_usb3_ports; j++) { + ret = phy_power_on(dwc->usb3_generic_phy[j]); + if (ret < 0) + goto err_power_off_usb3_phy; + } + + return 0; + +err_power_off_usb3_phy: + while (--j >= 0) + phy_power_off(dwc->usb3_generic_phy[j]); + +err_power_off_usb2_phy: + while (--i >= 0) + phy_power_off(dwc->usb2_generic_phy[i]); + + usb_phy_set_suspend(dwc->usb3_phy, 1); usb_phy_set_suspend(dwc->usb2_phy, 1); + + return ret; +} + +static void dwc3_phy_power_off(struct dwc3 *dwc) +{ + int i; + + for (i = 0; i < dwc->num_usb3_ports; i++) + phy_power_off(dwc->usb3_generic_phy[i]); + + for (i = 0; i < dwc->num_usb2_ports; i++) + phy_power_off(dwc->usb2_generic_phy[i]); + usb_phy_set_suspend(dwc->usb3_phy, 1); - phy_power_off(dwc->usb2_generic_phy); - phy_power_off(dwc->usb3_generic_phy); - clk_bulk_disable(dwc->num_clks, dwc->clks); - clk_bulk_unprepare(dwc->num_clks, dwc->clks); + usb_phy_set_suspend(dwc->usb2_phy, 1); +} + +static int dwc3_clk_enable(struct dwc3 *dwc) +{ + int ret; + + ret = clk_prepare_enable(dwc->bus_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(dwc->ref_clk); + if (ret) + goto disable_bus_clk; + + ret = clk_prepare_enable(dwc->susp_clk); + if (ret) + goto disable_ref_clk; + + ret = clk_prepare_enable(dwc->utmi_clk); + if (ret) + goto disable_susp_clk; + + ret = clk_prepare_enable(dwc->pipe_clk); + if (ret) + goto disable_utmi_clk; + + return 0; + +disable_utmi_clk: + clk_disable_unprepare(dwc->utmi_clk); +disable_susp_clk: + clk_disable_unprepare(dwc->susp_clk); +disable_ref_clk: + clk_disable_unprepare(dwc->ref_clk); +disable_bus_clk: + clk_disable_unprepare(dwc->bus_clk); + return ret; +} + +static void dwc3_clk_disable(struct dwc3 *dwc) +{ + clk_disable_unprepare(dwc->pipe_clk); + clk_disable_unprepare(dwc->utmi_clk); + clk_disable_unprepare(dwc->susp_clk); + clk_disable_unprepare(dwc->ref_clk); + clk_disable_unprepare(dwc->bus_clk); +} + +void dwc3_core_exit(struct dwc3 *dwc) +{ + dwc3_event_buffers_cleanup(dwc); + dwc3_phy_power_off(dwc); + dwc3_phy_exit(dwc); + dwc3_clk_disable(dwc); reset_control_assert(dwc->reset); } +EXPORT_SYMBOL_GPL(dwc3_core_exit); static bool dwc3_core_is_valid(struct dwc3 *dwc) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); + dwc->ip = DWC3_GSNPS_ID(reg); /* This should read as U3 followed by revision number */ - if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) { - /* Detected DWC_usb3 IP */ + if (DWC3_IP_IS(DWC3)) { dwc->revision = reg; - } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) { - /* Detected DWC_usb31 IP */ + } else if (DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) { dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); - dwc->revision |= DWC3_REVISION_IS_DWC31; dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE); } else { return false; @@ -715,13 +1009,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) static void dwc3_core_setup_global_control(struct dwc3 *dwc) { - u32 hwparams4 = dwc->hwparams.hwparams4; + unsigned int power_opt; + unsigned int hw_mode; u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1); - switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { + switch (power_opt) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: /** * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an @@ -737,16 +1034,12 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) */ if ((dwc->dr_mode == USB_DR_MODE_HOST || dwc->dr_mode == USB_DR_MODE_OTG) && - (dwc->revision >= DWC3_REVISION_210A && - dwc->revision <= DWC3_REVISION_250A)) + DWC3_VER_IS_WITHIN(DWC3, 210A, 250A)) reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; else reg &= ~DWC3_GCTL_DSBLCLKGTNG; break; case DWC3_GHWPARAMS1_EN_PWROPT_HIB: - /* enable hibernation here */ - dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); - /* * REVISIT Enabling this bit so that host-mode hibernation * will work. Device-mode hibernation is not yet implemented. @@ -758,6 +1051,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) break; } + /* + * This is a workaround for STAR#4846132, which only affects + * DWC_usb31 version2.00a operating in host mode. + * + * There is a problem in DWC_usb31 version 2.00a operating + * in host mode that would cause a CSR read timeout When CSR + * read coincides with RAM Clock Gating Entry. By disable + * Clock Gating, sacrificing power consumption for normal + * operation. + */ + if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO && + hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A)) + reg |= DWC3_GCTL_DSBLCLKGTNG; + /* check if current dwc3 is on simulation board */ if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { dev_info(dwc->dev, "Running with FPGA optimizations\n"); @@ -781,7 +1088,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) * and falls back to high-speed mode which causes * the device to enter a Connect/Disconnect loop */ - if (dwc->revision < DWC3_REVISION_190A) + if (DWC3_VER_IS_PRIOR(DWC3, 190A)) reg |= DWC3_GCTL_U2RSTECN; dwc3_writel(dwc->regs, DWC3_GCTL, reg); @@ -813,21 +1120,19 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc) * result = 1, means INCRx burst mode supported. * result > 1, means undefined length burst mode supported. */ - ntype = device_property_read_u32_array(dev, - "snps,incr-burst-type-adjustment", NULL, 0); + ntype = device_property_count_u32(dev, "snps,incr-burst-type-adjustment"); if (ntype <= 0) return; vals = kcalloc(ntype, sizeof(u32), GFP_KERNEL); - if (!vals) { - dev_err(dev, "Error to get memory\n"); + if (!vals) return; - } /* Get INCR burst type, and parse it */ ret = device_property_read_u32_array(dev, "snps,incr-burst-type-adjustment", vals, ntype); if (ret) { + kfree(vals); dev_err(dev, "Error to get property\n"); return; } @@ -846,6 +1151,8 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc) incrx_mode = INCRX_BURST_MODE; } + kfree(vals); + /* Enable Undefined Length INCR Burst and Enable INCRx Burst */ cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK; if (incrx_mode) @@ -882,22 +1189,155 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg); } +static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc) +{ + u32 scale; + u32 reg; + + if (!dwc->susp_clk) + return; + + /* + * The power down scale field specifies how many suspend_clk + * periods fit into a 16KHz clock period. When performing + * the division, round up the remainder. + * + * The power down scale value is calculated using the fastest + * frequency of the suspend_clk. If it isn't fixed (but within + * the accuracy requirement), the driver may not know the max + * rate of the suspend_clk, so only update the power down scale + * if the default is less than the calculated value from + * clk_get_rate() or if the default is questionably high + * (3x or more) to be within the requirement. + */ + scale = DIV_ROUND_UP(clk_get_rate(dwc->susp_clk), 16000); + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + if ((reg & DWC3_GCTL_PWRDNSCALE_MASK) < DWC3_GCTL_PWRDNSCALE(scale) || + (reg & DWC3_GCTL_PWRDNSCALE_MASK) > DWC3_GCTL_PWRDNSCALE(scale*3)) { + reg &= ~(DWC3_GCTL_PWRDNSCALE_MASK); + reg |= DWC3_GCTL_PWRDNSCALE(scale); + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + } +} + +static void dwc3_config_threshold(struct dwc3 *dwc) +{ + u32 reg; + u8 rx_thr_num; + u8 rx_maxburst; + u8 tx_thr_num; + u8 tx_maxburst; + + /* + * Must config both number of packets and max burst settings to enable + * RX and/or TX threshold. + */ + if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) { + rx_thr_num = dwc->rx_thr_num_pkt_prd; + rx_maxburst = dwc->rx_max_burst_prd; + tx_thr_num = dwc->tx_thr_num_pkt_prd; + tx_maxburst = dwc->tx_max_burst_prd; + + if (rx_thr_num && rx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + reg |= DWC31_RXTHRNUMPKTSEL_PRD; + + reg &= ~DWC31_RXTHRNUMPKT_PRD(~0); + reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num); + + reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0); + reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + } + + if (tx_thr_num && tx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); + reg |= DWC31_TXTHRNUMPKTSEL_PRD; + + reg &= ~DWC31_TXTHRNUMPKT_PRD(~0); + reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num); + + reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0); + reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + } + } + + rx_thr_num = dwc->rx_thr_num_pkt; + rx_maxburst = dwc->rx_max_burst; + tx_thr_num = dwc->tx_thr_num_pkt; + tx_maxburst = dwc->tx_max_burst; + + if (DWC3_IP_IS(DWC3)) { + if (rx_thr_num && rx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + reg |= DWC3_GRXTHRCFG_PKTCNTSEL; + + reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0); + reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num); + + reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0); + reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + } + + if (tx_thr_num && tx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); + reg |= DWC3_GTXTHRCFG_PKTCNTSEL; + + reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0); + reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num); + + reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0); + reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + } + } else { + if (rx_thr_num && rx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + reg |= DWC31_GRXTHRCFG_PKTCNTSEL; + + reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0); + reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num); + + reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0); + reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + } + + if (tx_thr_num && tx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); + reg |= DWC31_GTXTHRCFG_PKTCNTSEL; + + reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0); + reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num); + + reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0); + reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + } + } +} + /** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure * * Returns 0 on success otherwise negative errno. */ -static int dwc3_core_init(struct dwc3 *dwc) +int dwc3_core_init(struct dwc3 *dwc) { + unsigned int hw_mode; u32 reg; int ret; - if (!dwc3_core_is_valid(dwc)) { - dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); - ret = -ENODEV; - goto err0; - } + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); /* * Write Linux Version Code to our GUID register so it's easy to figure @@ -905,61 +1345,61 @@ static int dwc3_core_init(struct dwc3 *dwc) */ dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE); - /* Handle USB2.0-only core configuration */ - if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == - DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { - if (dwc->maximum_speed == USB_SPEED_SUPER) - dwc->maximum_speed = USB_SPEED_HIGH; - } - ret = dwc3_phy_setup(dwc); if (ret) - goto err0; + return ret; if (!dwc->ulpi_ready) { ret = dwc3_core_ulpi_init(dwc); - if (ret) - goto err0; + if (ret) { + if (ret == -ETIMEDOUT) { + dwc3_core_soft_reset(dwc); + ret = -EPROBE_DEFER; + } + return ret; + } dwc->ulpi_ready = true; } if (!dwc->phys_ready) { ret = dwc3_core_get_phy(dwc); if (ret) - goto err0a; + goto err_exit_ulpi; dwc->phys_ready = true; } + ret = dwc3_phy_init(dwc); + if (ret) + goto err_exit_ulpi; + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0a; + goto err_exit_phy; dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); - ret = dwc3_setup_scratch_buffers(dwc); - if (ret) - goto err1; + /* Set power down scale of suspend_clk */ + dwc3_set_power_down_clk_scale(dwc); /* Adjust Frame Length */ dwc3_frame_length_adjustment(dwc); + /* Adjust Reference Clock Period */ + dwc3_ref_clk_period(dwc); + dwc3_set_incr_burst_type(dwc); - usb_phy_set_suspend(dwc->usb2_phy, 0); - usb_phy_set_suspend(dwc->usb3_phy, 0); - ret = phy_power_on(dwc->usb2_generic_phy); - if (ret < 0) - goto err2; + dwc3_config_soc_bus(dwc); - ret = phy_power_on(dwc->usb3_generic_phy); - if (ret < 0) - goto err3; + ret = dwc3_phy_power_on(dwc); + if (ret) + goto err_exit_phy; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err4; + goto err_power_off_phy; } /* @@ -967,111 +1407,135 @@ static int dwc3_core_init(struct dwc3 *dwc) * the DWC_usb3 controller. It is NOT available in the * DWC_usb31 controller. */ - if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) { + if (DWC3_VER_IS_WITHIN(DWC3, 310A, ANY)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); reg |= DWC3_GUCTL2_RST_ACTBITLATER; dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); } - if (dwc->revision >= DWC3_REVISION_250A) { + /* + * STAR 9001285599: This issue affects DWC_usb3 version 3.20a + * only. If the PM TIMER ECM is enabled through GUCTL2[19], the + * link compliance test (TD7.21) may fail. If the ECN is not + * enabled (GUCTL2[19] = 0), the controller will use the old timer + * value (5us), which is still acceptable for the link compliance + * test. Therefore, do not enable PM TIMER ECM in 3.20a by + * setting GUCTL2[19] by default; instead, use GUCTL2[19] = 0. + */ + if (DWC3_VER_IS(DWC3, 320A)) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); + reg &= ~DWC3_GUCTL2_LC_TIMER; + dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); + } + + /* + * When configured in HOST mode, after issuing U3/L2 exit controller + * fails to send proper CRC checksum in CRC5 field. Because of this + * behaviour Transaction Error is generated, resulting in reset and + * re-enumeration of usb device attached. All the termsel, xcvrsel, + * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 + * will correct this problem. This option is to support certain + * legacy ULPI PHYs. + */ + if (dwc->resume_hs_terminations) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); + reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + + if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); /* * Enable hardware control of sending remote wakeup * in HS when the device is in the L1 state. */ - if (dwc->revision >= DWC3_REVISION_290A) + if (!DWC3_VER_IS_PRIOR(DWC3, 290A)) reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW; - if (dwc->dis_tx_ipgap_linecheck_quirk) - reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; - - dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); - } - - if (dwc->dr_mode == USB_DR_MODE_HOST || - dwc->dr_mode == USB_DR_MODE_OTG) { - reg = dwc3_readl(dwc->regs, DWC3_GUCTL); - /* - * Enable Auto retry Feature to make the controller operating in - * Host mode on seeing transaction errors(CRC errors or internal - * overrun scenerios) on IN transfers to reply to the device - * with a non-terminating retry ACK (i.e, an ACK transcation - * packet with Retry=1 & Nump != 0) + * Decouple USB 2.0 L1 & L2 events which will allow for + * gadget driver to only receive U3/L2 suspend & wakeup + * events and prevent the more frequent L1 LPM transitions + * from interrupting the driver. */ - reg |= DWC3_GUCTL_HSTINAUTORETRY; - - dwc3_writel(dwc->regs, DWC3_GUCTL, reg); - } + if (!DWC3_VER_IS_PRIOR(DWC3, 300A)) + reg |= DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT; - /* - * Must config both number of packets and max burst settings to enable - * RX and/or TX threshold. - */ - if (dwc3_is_usb31(dwc) && dwc->dr_mode == USB_DR_MODE_HOST) { - u8 rx_thr_num = dwc->rx_thr_num_pkt_prd; - u8 rx_maxburst = dwc->rx_max_burst_prd; - u8 tx_thr_num = dwc->tx_thr_num_pkt_prd; - u8 tx_maxburst = dwc->tx_max_burst_prd; + if (dwc->dis_tx_ipgap_linecheck_quirk) + reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; - if (rx_thr_num && rx_maxburst) { - reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); - reg |= DWC31_RXTHRNUMPKTSEL_PRD; + if (dwc->parkmode_disable_ss_quirk) + reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; - reg &= ~DWC31_RXTHRNUMPKT_PRD(~0); - reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num); + if (dwc->parkmode_disable_hs_quirk) + reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS; - reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0); - reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst); - - dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY)) { + if (dwc->maximum_speed == USB_SPEED_FULL || + dwc->maximum_speed == USB_SPEED_HIGH) + reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK; + else + reg &= ~DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK; } - if (tx_thr_num && tx_maxburst) { - reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); - reg |= DWC31_TXTHRNUMPKTSEL_PRD; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } - reg &= ~DWC31_TXTHRNUMPKT_PRD(~0); - reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num); + dwc3_config_threshold(dwc); - reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0); - reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst); + if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && + (DWC3_IP_IS(DWC31)) && + dwc->maximum_speed == USB_SPEED_SUPER) { + int i; - dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + for (i = 0; i < dwc->num_usb3_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_LLUCTL(i)); + reg |= DWC3_LLUCTL_FORCE_GEN1; + dwc3_writel(dwc->regs, DWC3_LLUCTL(i), reg); } } - return 0; - -err4: - phy_power_off(dwc->usb3_generic_phy); - -err3: - phy_power_off(dwc->usb2_generic_phy); - -err2: - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); + /* + * STAR 9001346572: This issue affects DWC_usb31 versions 1.80a and + * prior. When an active endpoint not currently cached in the host + * controller is chosen to be cached to the same index as an endpoint + * receiving NAKs, the endpoint receiving NAKs enters continuous + * retry mode. This prevents it from being evicted from the host + * controller cache, blocking the new endpoint from being cached and + * serviced. + * + * To resolve this, for controller versions 1.70a and 1.80a, set the + * GUCTL3 bit[16] (USB2.0 Internal Retry Disable) to 1. This bit + * disables the USB2.0 internal retry feature. The GUCTL3[16] register + * function is available only from version 1.70a. + */ + if (DWC3_VER_IS_WITHIN(DWC31, 170A, 180A)) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); + reg |= DWC3_GUCTL3_USB20_RETRY_DISABLE; + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg); + } -err1: - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); + return 0; -err0a: +err_power_off_phy: + dwc3_phy_power_off(dwc); +err_exit_phy: + dwc3_phy_exit(dwc); +err_exit_ulpi: dwc3_ulpi_exit(dwc); -err0: return ret; } +EXPORT_SYMBOL_GPL(dwc3_core_init); static int dwc3_core_get_phy(struct dwc3 *dwc) { struct device *dev = dwc->dev; struct device_node *node = dev->of_node; + char phy_name[9]; int ret; + u8 i; if (node) { dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); @@ -1083,51 +1547,51 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) if (IS_ERR(dwc->usb2_phy)) { ret = PTR_ERR(dwc->usb2_phy); - if (ret == -ENXIO || ret == -ENODEV) { + if (ret == -ENXIO || ret == -ENODEV) dwc->usb2_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; - } else { - dev_err(dev, "no usb2 phy configured\n"); - return ret; - } + else + return dev_err_probe(dev, ret, "no usb2 phy configured\n"); } if (IS_ERR(dwc->usb3_phy)) { ret = PTR_ERR(dwc->usb3_phy); - if (ret == -ENXIO || ret == -ENODEV) { + if (ret == -ENXIO || ret == -ENODEV) dwc->usb3_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; - } else { - dev_err(dev, "no usb3 phy configured\n"); - return ret; - } + else + return dev_err_probe(dev, ret, "no usb3 phy configured\n"); } - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); - if (IS_ERR(dwc->usb2_generic_phy)) { - ret = PTR_ERR(dwc->usb2_generic_phy); - if (ret == -ENOSYS || ret == -ENODEV) { - dwc->usb2_generic_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; - } else { - dev_err(dev, "no usb2 phy configured\n"); - return ret; + for (i = 0; i < dwc->num_usb2_ports; i++) { + if (dwc->num_usb2_ports == 1) + snprintf(phy_name, sizeof(phy_name), "usb2-phy"); + else + snprintf(phy_name, sizeof(phy_name), "usb2-%u", i); + + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name); + if (IS_ERR(dwc->usb2_generic_phy[i])) { + ret = PTR_ERR(dwc->usb2_generic_phy[i]); + if (ret == -ENOSYS || ret == -ENODEV) + dwc->usb2_generic_phy[i] = NULL; + else + return dev_err_probe(dev, ret, "failed to lookup phy %s\n", + phy_name); } } - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); - if (IS_ERR(dwc->usb3_generic_phy)) { - ret = PTR_ERR(dwc->usb3_generic_phy); - if (ret == -ENOSYS || ret == -ENODEV) { - dwc->usb3_generic_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; - } else { - dev_err(dev, "no usb3 phy configured\n"); - return ret; + for (i = 0; i < dwc->num_usb3_ports; i++) { + if (dwc->num_usb3_ports == 1) + snprintf(phy_name, sizeof(phy_name), "usb3-phy"); + else + snprintf(phy_name, sizeof(phy_name), "usb3-%u", i); + + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name); + if (IS_ERR(dwc->usb3_generic_phy[i])) { + ret = PTR_ERR(dwc->usb3_generic_phy[i]); + if (ret == -ENOSYS || ret == -ENODEV) + dwc->usb3_generic_phy[i] = NULL; + else + return dev_err_probe(dev, ret, "failed to lookup phy %s\n", + phy_name); } } @@ -1138,47 +1602,40 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) { struct device *dev = dwc->dev; int ret; + int i; switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, false); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize gadget\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "failed to initialize gadget\n"); break; case USB_DR_MODE_HOST: - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, false); if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb3_ports; i++) + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); ret = dwc3_host_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize host\n"); - return ret; - } - phy_calibrate(dwc->usb2_generic_phy); + if (ret) + return dev_err_probe(dev, ret, "failed to initialize host\n"); break; case USB_DR_MODE_OTG: INIT_WORK(&dwc->drd_work, __dwc3_set_mode); ret = dwc3_drd_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize dual-role\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "failed to initialize dual-role\n"); break; default: dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); @@ -1204,6 +1661,37 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) /* do nothing */ break; } + + /* de-assert DRVVBUS for HOST and OTG mode */ + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true); +} + +static void dwc3_get_software_properties(struct dwc3 *dwc, + const struct dwc3_properties *properties) +{ + struct device *tmpdev; + u16 gsbuscfg0_reqinfo; + int ret; + + dwc->gsbuscfg0_reqinfo = DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED; + + if (properties->gsbuscfg0_reqinfo != + DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED) { + dwc->gsbuscfg0_reqinfo = properties->gsbuscfg0_reqinfo; + return; + } + + /* + * Iterate over all parent nodes for finding swnode properties + * and non-DT (non-ABI) properties. + */ + for (tmpdev = dwc->dev; tmpdev; tmpdev = tmpdev->parent) { + ret = device_property_read_u16(tmpdev, + "snps,gsbuscfg0-reqinfo", + &gsbuscfg0_reqinfo); + if (!ret) + dwc->gsbuscfg0_reqinfo = gsbuscfg0_reqinfo; + } } static void dwc3_get_properties(struct dwc3 *dwc) @@ -1212,13 +1700,19 @@ static void dwc3_get_properties(struct dwc3 *dwc) u8 lpm_nyet_threshold; u8 tx_de_emphasis; u8 hird_threshold; - u8 rx_thr_num_pkt_prd; - u8 rx_max_burst_prd; - u8 tx_thr_num_pkt_prd; - u8 tx_max_burst_prd; + u8 rx_thr_num_pkt = 0; + u8 rx_max_burst = 0; + u8 tx_thr_num_pkt = 0; + u8 tx_max_burst = 0; + u8 rx_thr_num_pkt_prd = 0; + u8 rx_max_burst_prd = 0; + u8 tx_thr_num_pkt_prd = 0; + u8 tx_max_burst_prd = 0; + u8 tx_fifo_resize_max_num; + u16 num_hc_interrupters; /* default to highest possible threshold */ - lpm_nyet_threshold = 0xff; + lpm_nyet_threshold = 0xf; /* default to -3.5dB de-emphasis */ tx_de_emphasis = 1; @@ -1229,7 +1723,18 @@ static void dwc3_get_properties(struct dwc3 *dwc) */ hird_threshold = 12; + /* + * default to a TXFIFO size large enough to fit 6 max packets. This + * allows for systems with larger bus latencies to have some headroom + * for endpoints that have a large bMaxBurst value. + */ + tx_fifo_resize_max_num = 6; + + /* default to a single XHCI interrupter */ + num_hc_interrupters = 1; + dwc->maximum_speed = usb_get_maximum_speed(dev); + dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev); dwc->dr_mode = usb_get_dr_mode(dev); dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node); @@ -1240,6 +1745,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) else dwc->sysdev = dwc->dev; + dwc->sys_wakeup = device_may_wakeup(dwc->sysdev); + dwc->has_lpm_erratum = device_property_read_bool(dev, "snps,has-lpm-erratum"); device_property_read_u8(dev, "snps,lpm-nyet-threshold", @@ -1254,6 +1761,16 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,usb3_lpm_capable"); dwc->usb2_lpm_disable = device_property_read_bool(dev, "snps,usb2-lpm-disable"); + dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev, + "snps,usb2-gadget-lpm-disable"); + device_property_read_u8(dev, "snps,rx-thr-num-pkt", + &rx_thr_num_pkt); + device_property_read_u8(dev, "snps,rx-max-burst", + &rx_max_burst); + device_property_read_u8(dev, "snps,tx-thr-num-pkt", + &tx_thr_num_pkt); + device_property_read_u8(dev, "snps,tx-max-burst", + &tx_max_burst); device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd", &rx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,rx-max-burst-prd", @@ -1262,6 +1779,17 @@ static void dwc3_get_properties(struct dwc3 *dwc) &tx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,tx-max-burst-prd", &tx_max_burst_prd); + device_property_read_u16(dev, "num-hc-interrupters", + &num_hc_interrupters); + /* DWC3 core allowed to have a max of 8 interrupters */ + if (num_hc_interrupters > 8) + num_hc_interrupters = 8; + + dwc->do_fifo_resize = device_property_read_bool(dev, + "tx-fifo-resize"); + if (dwc->do_fifo_resize) + device_property_read_u8(dev, "tx-fifo-max-num", + &tx_fifo_resize_max_num); dwc->disable_scramble_quirk = device_property_read_bool(dev, "snps,disable_scramble_quirk"); @@ -1285,6 +1813,10 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis_u2_susphy_quirk"); dwc->dis_enblslpm_quirk = device_property_read_bool(dev, "snps,dis_enblslpm_quirk"); + dwc->dis_u1_entry_quirk = device_property_read_bool(dev, + "snps,dis-u1-entry-quirk"); + dwc->dis_u2_entry_quirk = device_property_read_bool(dev, + "snps,dis-u2-entry-quirk"); dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, "snps,dis_rxdet_inp3_quirk"); dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev, @@ -1293,6 +1825,16 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->resume_hs_terminations = device_property_read_bool(dev, + "snps,resume-hs-terminations"); + dwc->ulpi_ext_vbus_drv = device_property_read_bool(dev, + "snps,ulpi-ext-vbus-drv"); + dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, + "snps,parkmode-disable-ss-quirk"); + dwc->parkmode_disable_hs_quirk = device_property_read_bool(dev, + "snps,parkmode-disable-hs-quirk"); + dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev, + "snps,gfladj-refclk-lpm-sel-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); @@ -1302,15 +1844,25 @@ static void dwc3_get_properties(struct dwc3 *dwc) &dwc->hsphy_interface); device_property_read_u32(dev, "snps,quirk-frame-length-adjustment", &dwc->fladj); + device_property_read_u32(dev, "snps,ref-clock-period-ns", + &dwc->ref_clk_per); dwc->dis_metastability_quirk = device_property_read_bool(dev, "snps,dis_metastability_quirk"); + dwc->dis_split_quirk = device_property_read_bool(dev, + "snps,dis-split-quirk"); + dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; - dwc->hird_threshold = hird_threshold - | (dwc->is_utmi_l1_suspend << 4); + dwc->hird_threshold = hird_threshold; + + dwc->rx_thr_num_pkt = rx_thr_num_pkt; + dwc->rx_max_burst = rx_max_burst; + + dwc->tx_thr_num_pkt = tx_thr_num_pkt; + dwc->tx_max_burst = tx_max_burst; dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd; dwc->rx_max_burst_prd = rx_max_burst_prd; @@ -1318,94 +1870,316 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd; dwc->tx_max_burst_prd = tx_max_burst_prd; - dwc->imod_interval = 0; + dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num; + + dwc->num_hc_interrupters = num_hc_interrupters; } /* check whether the core supports IMOD */ bool dwc3_has_imod(struct dwc3 *dwc) { - return ((dwc3_is_usb3(dwc) && - dwc->revision >= DWC3_REVISION_300A) || - (dwc3_is_usb31(dwc) && - dwc->revision >= DWC3_USB31_REVISION_120A)); + return DWC3_VER_IS_WITHIN(DWC3, 300A, ANY) || + DWC3_VER_IS_WITHIN(DWC31, 120A, ANY) || + DWC3_IP_IS(DWC32); } static void dwc3_check_params(struct dwc3 *dwc) { struct device *dev = dwc->dev; - - /* Check for proper value of imod_interval */ - if (dwc->imod_interval && !dwc3_has_imod(dwc)) { - dev_warn(dwc->dev, "Interrupt moderation not supported\n"); - dwc->imod_interval = 0; - } + unsigned int hwparam_gen = + DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3); /* + * Enable IMOD for all supporting controllers. + * + * Particularly, DWC_usb3 v3.00a must enable this feature for + * the following reason: + * * Workaround for STAR 9000961433 which affects only version * 3.00a of the DWC_usb3 core. This prevents the controller * interrupt from being masked while handling events. IMOD * allows us to work around this issue. Enable it for the * affected version. */ - if (!dwc->imod_interval && - (dwc->revision == DWC3_REVISION_300A)) + if (dwc3_has_imod((dwc))) dwc->imod_interval = 1; /* Check the maximum_speed parameter */ switch (dwc->maximum_speed) { - case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: + break; case USB_SPEED_SUPER: + if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) + dev_warn(dev, "UDC doesn't support Gen 1\n"); + break; case USB_SPEED_SUPER_PLUS: + if ((DWC3_IP_IS(DWC32) && + hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) || + (!DWC3_IP_IS(DWC32) && + hwparam_gen != DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + dev_warn(dev, "UDC doesn't support SSP\n"); break; default: dev_err(dev, "invalid maximum_speed parameter %d\n", dwc->maximum_speed); - /* fall through */ + fallthrough; case USB_SPEED_UNKNOWN: - /* default to superspeed */ - dwc->maximum_speed = USB_SPEED_SUPER; - - /* - * default to superspeed plus if we are capable. - */ - if (dwc3_is_usb31(dwc) && - (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == - DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + switch (hwparam_gen) { + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2: dwc->maximum_speed = USB_SPEED_SUPER_PLUS; - + break; + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1: + if (DWC3_IP_IS(DWC32)) + dwc->maximum_speed = USB_SPEED_SUPER_PLUS; + else + dwc->maximum_speed = USB_SPEED_SUPER; + break; + case DWC3_GHWPARAMS3_SSPHY_IFC_DIS: + dwc->maximum_speed = USB_SPEED_HIGH; + break; + default: + dwc->maximum_speed = USB_SPEED_SUPER; + break; + } break; } + + /* + * Currently the controller does not have visibility into the HW + * parameter to determine the maximum number of lanes the HW supports. + * If the number of lanes is not specified in the device property, then + * set the default to support dual-lane for DWC_usb32 and single-lane + * for DWC_usb31 for super-speed-plus. + */ + if (dwc->maximum_speed == USB_SPEED_SUPER_PLUS) { + switch (dwc->max_ssp_rate) { + case USB_SSP_GEN_2x1: + if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_GEN1) + dev_warn(dev, "UDC only supports Gen 1\n"); + break; + case USB_SSP_GEN_1x2: + case USB_SSP_GEN_2x2: + if (DWC3_IP_IS(DWC31)) + dev_warn(dev, "UDC only supports single lane\n"); + break; + case USB_SSP_GEN_UNKNOWN: + default: + switch (hwparam_gen) { + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2: + if (DWC3_IP_IS(DWC32)) + dwc->max_ssp_rate = USB_SSP_GEN_2x2; + else + dwc->max_ssp_rate = USB_SSP_GEN_2x1; + break; + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1: + if (DWC3_IP_IS(DWC32)) + dwc->max_ssp_rate = USB_SSP_GEN_1x2; + break; + } + break; + } + } } -static int dwc3_probe(struct platform_device *pdev) +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) { - struct device *dev = &pdev->dev; - struct resource *res, dwc_res; - struct dwc3 *dwc; + struct device *dev = dwc->dev; + struct device_node *np_phy; + struct extcon_dev *edev = NULL; + const char *name; - int ret; + if (device_property_present(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); - void __iomem *regs; + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) + return extcon_get_extcon_dev(name); - dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); - if (!dwc) - return -ENOMEM; + /* + * Check explicitly if "usb-role-switch" is used since + * extcon_find_edev_by_node() can not be used to check the absence of + * an extcon device. In the absence of an device it will always return + * EPROBE_DEFER. + */ + if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) && + device_property_read_bool(dev, "usb-role-switch")) + return NULL; - dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks), - GFP_KERNEL); - if (!dwc->clks) - return -ENOMEM; + /* + * Try to get an extcon device from the USB PHY controller's "port" + * node. Check if it has the "port" node first, to avoid printing the + * error message from underlying code, as it's a valid case: extcon + * device (and "port" node) may be missing in case of "usb-role-switch" + * or OTG mode. + */ + np_phy = of_parse_phandle(dev->of_node, "phys", 0); + if (of_graph_is_present(np_phy)) { + struct device_node *np_conn; + + np_conn = of_graph_get_remote_node(np_phy, -1, -1); + if (np_conn) + edev = extcon_find_edev_by_node(np_conn); + of_node_put(np_conn); + } + of_node_put(np_phy); - dwc->dev = dev; + return edev; +} - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing memory resource\n"); - return -ENODEV; +static int dwc3_get_clocks(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + + if (!dev->of_node) + return 0; + + /* + * Clocks are optional, but new DT platforms should support all clocks + * as required by the DT-binding. + * Some devices have different clock names in legacy device trees, + * check for them to retain backwards compatibility. + */ + dwc->bus_clk = devm_clk_get_optional(dev, "bus_early"); + if (IS_ERR(dwc->bus_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + } + + if (dwc->bus_clk == NULL) { + dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk"); + if (IS_ERR(dwc->bus_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + } + } + + dwc->ref_clk = devm_clk_get_optional(dev, "ref"); + if (IS_ERR(dwc->ref_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + } + + if (dwc->ref_clk == NULL) { + dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk"); + if (IS_ERR(dwc->ref_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + } + } + + dwc->susp_clk = devm_clk_get_optional(dev, "suspend"); + if (IS_ERR(dwc->susp_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); } + if (dwc->susp_clk == NULL) { + dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk"); + if (IS_ERR(dwc->susp_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + } + } + + /* specific to Rockchip RK3588 */ + dwc->utmi_clk = devm_clk_get_optional(dev, "utmi"); + if (IS_ERR(dwc->utmi_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->utmi_clk), + "could not get utmi clock\n"); + } + + /* specific to Rockchip RK3588 */ + dwc->pipe_clk = devm_clk_get_optional(dev, "pipe"); + if (IS_ERR(dwc->pipe_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->pipe_clk), + "could not get pipe clock\n"); + } + + return 0; +} + +static int dwc3_get_num_ports(struct dwc3 *dwc) +{ + void __iomem *base; + u8 major_revision; + u32 offset; + u32 val; + + /* + * Remap xHCI address space to access XHCI ext cap regs since it is + * needed to get information on number of ports present. + */ + base = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (!base) + return -ENOMEM; + + offset = 0; + do { + offset = xhci_find_next_ext_cap(base, offset, + XHCI_EXT_CAPS_PROTOCOL); + if (!offset) + break; + + val = readl(base + offset); + major_revision = XHCI_EXT_PORT_MAJOR(val); + + val = readl(base + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); + } else { + dev_warn(dwc->dev, "unrecognized port major revision %d\n", + major_revision); + } + } while (1); + + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", + dwc->num_usb2_ports, dwc->num_usb3_ports); + + iounmap(base); + + if (dwc->num_usb2_ports > DWC3_USB2_MAX_PORTS || + dwc->num_usb3_ports > DWC3_USB3_MAX_PORTS) + return -EINVAL; + + return 0; +} + +static struct power_supply *dwc3_get_usb_power_supply(struct dwc3 *dwc) +{ + struct power_supply *usb_psy; + const char *usb_psy_name; + int ret; + + ret = device_property_read_string(dwc->dev, "usb-psy-name", &usb_psy_name); + if (ret < 0) + return NULL; + + usb_psy = power_supply_get_by_name(usb_psy_name); + if (!usb_psy) + return ERR_PTR(-EPROBE_DEFER); + + return usb_psy; +} + +int dwc3_core_probe(const struct dwc3_probe_data *data) +{ + struct dwc3 *dwc = data->dwc; + struct device *dev = dwc->dev; + struct resource dwc_res; + unsigned int hw_mode; + void __iomem *regs; + struct resource *res = data->res; + int ret; + dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; @@ -1419,6 +2193,17 @@ static int dwc3_probe(struct platform_device *pdev) dwc_res = *res; dwc_res.start += DWC3_GLOBALS_REGS_START; + if (dev->of_node) { + struct device_node *parent = of_get_parent(dev->of_node); + + if (of_device_is_compatible(parent, "realtek,rtd-dwc3")) { + dwc_res.start -= DWC3_GLOBALS_REGS_START; + dwc_res.start += DWC3_RTK_RTD_GLOBALS_REGS_START; + } + + of_node_put(parent); + } + regs = devm_ioremap_resource(dev, &dwc_res); if (IS_ERR(regs)) return PTR_ERR(regs); @@ -1428,48 +2213,70 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); - dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); - if (IS_ERR(dwc->reset)) - return PTR_ERR(dwc->reset); + dwc3_get_software_properties(dwc, &data->properties); - if (dev->of_node) { - dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); + dwc->usb_psy = dwc3_get_usb_power_supply(dwc); + if (IS_ERR(dwc->usb_psy)) + return dev_err_probe(dev, PTR_ERR(dwc->usb_psy), "couldn't get usb power supply\n"); - ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); - if (ret == -EPROBE_DEFER) - return ret; - /* - * Clocks are optional, but new DT platforms should support all - * clocks as required by the DT-binding. - */ + if (!data->ignore_clocks_and_resets) { + dwc->reset = devm_reset_control_array_get_optional_shared(dev); + if (IS_ERR(dwc->reset)) { + ret = PTR_ERR(dwc->reset); + goto err_put_psy; + } + + ret = dwc3_get_clocks(dwc); if (ret) - dwc->num_clks = 0; + goto err_put_psy; } ret = reset_control_deassert(dwc->reset); if (ret) - goto put_clks; + goto err_put_psy; - ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + ret = dwc3_clk_enable(dwc); if (ret) - goto assert_reset; + goto err_assert_reset; - ret = clk_bulk_enable(dwc->num_clks, dwc->clks); - if (ret) - goto unprepare_clks; + if (!dwc3_core_is_valid(dwc)) { + dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); + ret = -ENODEV; + goto err_disable_clks; + } - platform_set_drvdata(pdev, dwc); + dev_set_drvdata(dev, dwc); dwc3_cache_hwparams(dwc); + if (!dev_is_pci(dwc->sysdev) && + DWC3_GHWPARAMS0_AWIDTH(dwc->hwparams.hwparams0) == 64) { + ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64)); + if (ret) + goto err_disable_clks; + } + + /* + * Currently only DWC3 controllers that are host-only capable + * can have more than one port. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_get_num_ports(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); + mutex_init(&dwc->mutex); + pm_runtime_get_noresume(dev); pm_runtime_set_active(dev); pm_runtime_use_autosuspend(dev); pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY); pm_runtime_enable(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto err1; pm_runtime_forbid(dev); @@ -1477,84 +2284,123 @@ static int dwc3_probe(struct platform_device *pdev) if (ret) { dev_err(dwc->dev, "failed to allocate event buffers\n"); ret = -ENOMEM; - goto err2; + goto err_allow_rpm; } - ret = dwc3_get_dr_mode(dwc); - if (ret) - goto err3; + dwc->edev = dwc3_get_extcon(dwc); + if (IS_ERR(dwc->edev)) { + ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n"); + goto err_free_event_buffers; + } - ret = dwc3_alloc_scratch_buffers(dwc); + ret = dwc3_get_dr_mode(dwc); if (ret) - goto err3; + goto err_free_event_buffers; ret = dwc3_core_init(dwc); if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize core: %d\n", ret); - goto err4; + dev_err_probe(dev, ret, "failed to initialize core\n"); + goto err_free_event_buffers; } dwc3_check_params(dwc); + dwc3_debugfs_init(dwc); - ret = dwc3_core_init_mode(dwc); - if (ret) - goto err5; + if (!data->skip_core_init_mode) { + ret = dwc3_core_init_mode(dwc); + if (ret) + goto err_exit_debugfs; + } - dwc3_debugfs_init(dwc); pm_runtime_put(dev); + dma_set_max_seg_size(dev, UINT_MAX); + return 0; -err5: +err_exit_debugfs: + dwc3_debugfs_exit(dwc); dwc3_event_buffers_cleanup(dwc); + dwc3_phy_power_off(dwc); + dwc3_phy_exit(dwc); dwc3_ulpi_exit(dwc); +err_free_event_buffers: + dwc3_free_event_buffers(dwc); +err_allow_rpm: + pm_runtime_allow(dev); + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); +err_disable_clks: + dwc3_clk_disable(dwc); +err_assert_reset: + reset_control_assert(dwc->reset); +err_put_psy: + if (dwc->usb_psy) + power_supply_put(dwc->usb_psy); -err4: - dwc3_free_scratch_buffers(dwc); + return ret; +} +EXPORT_SYMBOL_GPL(dwc3_core_probe); -err3: - dwc3_free_event_buffers(dwc); +static int dwc3_probe(struct platform_device *pdev) +{ + struct dwc3_probe_data probe_data = {}; + struct resource *res; + struct dwc3 *dwc; -err2: - pm_runtime_allow(&pdev->dev); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing memory resource\n"); + return -ENODEV; + } -err1: - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); + dwc = devm_kzalloc(&pdev->dev, sizeof(*dwc), GFP_KERNEL); + if (!dwc) + return -ENOMEM; - clk_bulk_disable(dwc->num_clks, dwc->clks); -unprepare_clks: - clk_bulk_unprepare(dwc->num_clks, dwc->clks); -assert_reset: - reset_control_assert(dwc->reset); -put_clks: - clk_bulk_put(dwc->num_clks, dwc->clks); + dwc->dev = &pdev->dev; + dwc->glue_ops = NULL; - return ret; + probe_data.dwc = dwc; + probe_data.res = res; + probe_data.properties = DWC3_DEFAULT_PROPERTIES; + + return dwc3_core_probe(&probe_data); } -static int dwc3_remove(struct platform_device *pdev) +void dwc3_core_remove(struct dwc3 *dwc) { - struct dwc3 *dwc = platform_get_drvdata(pdev); - - pm_runtime_get_sync(&pdev->dev); + pm_runtime_get_sync(dwc->dev); - dwc3_debugfs_exit(dwc); dwc3_core_exit_mode(dwc); + dwc3_debugfs_exit(dwc); dwc3_core_exit(dwc); dwc3_ulpi_exit(dwc); - pm_runtime_put_sync(&pdev->dev); - pm_runtime_allow(&pdev->dev); - pm_runtime_disable(&pdev->dev); + pm_runtime_allow(dwc->dev); + pm_runtime_disable(dwc->dev); + pm_runtime_dont_use_autosuspend(dwc->dev); + pm_runtime_put_noidle(dwc->dev); + /* + * HACK: Clear the driver data, which is currently accessed by parent + * glue drivers, before allowing the parent to suspend. + */ + dev_set_drvdata(dwc->dev, NULL); + pm_runtime_set_suspended(dwc->dev); dwc3_free_event_buffers(dwc); - dwc3_free_scratch_buffers(dwc); - clk_bulk_put(dwc->num_clks, dwc->clks); - return 0; + if (dwc->usb_psy) + power_supply_put(dwc->usb_psy); +} +EXPORT_SYMBOL_GPL(dwc3_core_remove); + +static void dwc3_remove(struct platform_device *pdev) +{ + dwc3_core_remove(platform_get_drvdata(pdev)); } #ifdef CONFIG_PM @@ -1566,14 +2412,10 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc) if (ret) return ret; - ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + ret = dwc3_clk_enable(dwc); if (ret) goto assert_reset; - ret = clk_bulk_enable(dwc->num_clks, dwc->clks); - if (ret) - goto unprepare_clks; - ret = dwc3_core_init(dwc); if (ret) goto disable_clks; @@ -1581,9 +2423,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc) return 0; disable_clks: - clk_bulk_disable(dwc->num_clks, dwc->clks); -unprepare_clks: - clk_bulk_unprepare(dwc->num_clks, dwc->clks); + dwc3_clk_disable(dwc); assert_reset: reset_control_assert(dwc->reset); @@ -1592,18 +2432,35 @@ assert_reset: static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { - unsigned long flags; u32 reg; + int i; + int ret; + + if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) { + dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & + DWC3_GUSB2PHYCFG_SUSPHY) || + (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) & + DWC3_GUSB3PIPECTL_SUSPHY); + /* + * TI AM62 platform requires SUSPHY to be + * enabled for system suspend to work. + */ + if (!dwc->susphy_state) + dwc3_enable_susphy(dwc, true); + } switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: - spin_lock_irqsave(&dwc->lock, flags); - dwc3_gadget_suspend(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); + if (pm_runtime_suspended(dwc->dev)) + break; + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; + synchronize_irq(dwc->irq_gadget); dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: - if (!PMSG_IS_AUTO(msg)) { + if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) { dwc3_core_exit(dwc); break; } @@ -1611,17 +2468,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) /* Let controller to suspend HSPHY before PHY driver suspends */ if (dwc->dis_u2_susphy_quirk || dwc->dis_enblslpm_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | - DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | + DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } /* Give some time for USB2 PHY to suspend */ usleep_range(5000, 6000); } - phy_pm_runtime_put_sync(dwc->usb2_generic_phy); - phy_pm_runtime_put_sync(dwc->usb3_generic_phy); + for (i = 0; i < dwc->num_usb2_ports; i++) + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]); + for (i = 0; i < dwc->num_usb3_ports; i++) + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]); break; case DWC3_GCTL_PRTCAP_OTG: /* do nothing during runtime_suspend */ @@ -1629,9 +2490,10 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) break; if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) { - spin_lock_irqsave(&dwc->lock, flags); - dwc3_gadget_suspend(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; + synchronize_irq(dwc->irq_gadget); } dwc3_otg_exit(dwc); @@ -1647,9 +2509,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) { - unsigned long flags; int ret; u32 reg; + int i; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -1657,50 +2519,50 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (ret) return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); - spin_lock_irqsave(&dwc->lock, flags); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true); dwc3_gadget_resume(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: - if (!PMSG_IS_AUTO(msg)) { + if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) { ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, true); break; } /* Restore GUSB2PHYCFG bits that were modified in suspend */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + if (dwc->dis_u2_susphy_quirk) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - if (dwc->dis_enblslpm_quirk) - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + if (dwc->dis_enblslpm_quirk) + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } - phy_pm_runtime_get_sync(dwc->usb2_generic_phy); - phy_pm_runtime_get_sync(dwc->usb3_generic_phy); + for (i = 0; i < dwc->num_usb2_ports; i++) + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]); + for (i = 0; i < dwc->num_usb3_ports; i++) + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]); break; case DWC3_GCTL_PRTCAP_OTG: /* nothing to do on runtime_resume */ if (PMSG_IS_AUTO(msg)) break; - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; - dwc3_set_prtcap(dwc, dwc->current_dr_role); + dwc3_set_prtcap(dwc, dwc->current_dr_role, true); dwc3_otg_init(dwc); if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) { dwc3_otg_host_init(dwc); } else if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) { - spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_resume(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); } break; @@ -1709,6 +2571,11 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) break; } + if (!PMSG_IS_AUTO(msg)) { + /* restore SUSPHY state to that before system suspend. */ + dwc3_enable_susphy(dwc, dwc->susphy_state); + } + return 0; } @@ -1728,9 +2595,8 @@ static int dwc3_runtime_checks(struct dwc3 *dwc) return 0; } -static int dwc3_runtime_suspend(struct device *dev) +int dwc3_runtime_suspend(struct dwc3 *dwc) { - struct dwc3 *dwc = dev_get_drvdata(dev); int ret; if (dwc3_runtime_checks(dwc)) @@ -1740,25 +2606,26 @@ static int dwc3_runtime_suspend(struct device *dev) if (ret) return ret; - device_init_wakeup(dev, true); - return 0; } +EXPORT_SYMBOL_GPL(dwc3_runtime_suspend); -static int dwc3_runtime_resume(struct device *dev) +int dwc3_runtime_resume(struct dwc3 *dwc) { - struct dwc3 *dwc = dev_get_drvdata(dev); + struct device *dev = dwc->dev; int ret; - device_init_wakeup(dev, false); - ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME); if (ret) return ret; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: - dwc3_gadget_process_pending_events(dwc); + if (dwc->pending_events) { + pm_runtime_put(dev); + dwc->pending_events = false; + enable_irq(dwc->irq_gadget); + } break; case DWC3_GCTL_PRTCAP_HOST: default: @@ -1770,10 +2637,11 @@ static int dwc3_runtime_resume(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(dwc3_runtime_resume); -static int dwc3_runtime_idle(struct device *dev) +int dwc3_runtime_idle(struct dwc3 *dwc) { - struct dwc3 *dwc = dev_get_drvdata(dev); + struct device *dev = dwc->dev; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -1786,17 +2654,32 @@ static int dwc3_runtime_idle(struct device *dev) break; } - pm_runtime_mark_last_busy(dev); pm_runtime_autosuspend(dev); return 0; } +EXPORT_SYMBOL_GPL(dwc3_runtime_idle); + +static int dwc3_plat_runtime_suspend(struct device *dev) +{ + return dwc3_runtime_suspend(dev_get_drvdata(dev)); +} + +static int dwc3_plat_runtime_resume(struct device *dev) +{ + return dwc3_runtime_resume(dev_get_drvdata(dev)); +} + +static int dwc3_plat_runtime_idle(struct device *dev) +{ + return dwc3_runtime_idle(dev_get_drvdata(dev)); +} #endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP -static int dwc3_suspend(struct device *dev) +int dwc3_pm_suspend(struct dwc3 *dwc) { - struct dwc3 *dwc = dev_get_drvdata(dev); + struct device *dev = dwc->dev; int ret; ret = dwc3_suspend_common(dwc, PMSG_SUSPEND); @@ -1807,30 +2690,96 @@ static int dwc3_suspend(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(dwc3_pm_suspend); -static int dwc3_resume(struct device *dev) +int dwc3_pm_resume(struct dwc3 *dwc) { - struct dwc3 *dwc = dev_get_drvdata(dev); - int ret; + struct device *dev = dwc->dev; + int ret = 0; pinctrl_pm_select_default_state(dev); + pm_runtime_disable(dev); + ret = pm_runtime_set_active(dev); + if (ret) + goto out; + ret = dwc3_resume_common(dwc, PMSG_RESUME); if (ret) - return ret; + pm_runtime_set_suspended(dev); - pm_runtime_disable(dev); - pm_runtime_set_active(dev); +out: pm_runtime_enable(dev); + return ret; +} +EXPORT_SYMBOL_GPL(dwc3_pm_resume); + +void dwc3_pm_complete(struct dwc3 *dwc) +{ + u32 reg; + + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST && + dwc->dis_split_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); + reg |= DWC3_GUCTL3_SPLITDISABLE; + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg); + } +} +EXPORT_SYMBOL_GPL(dwc3_pm_complete); + +int dwc3_pm_prepare(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + + /* + * Indicate to the PM core that it may safely leave the device in + * runtime suspend if runtime-suspended already in device mode. + */ + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE && + pm_runtime_suspended(dev) && + !dev_pinctrl(dev)) + return 1; + return 0; } +EXPORT_SYMBOL_GPL(dwc3_pm_prepare); + +static int dwc3_plat_suspend(struct device *dev) +{ + return dwc3_pm_suspend(dev_get_drvdata(dev)); +} + +static int dwc3_plat_resume(struct device *dev) +{ + return dwc3_pm_resume(dev_get_drvdata(dev)); +} + +static void dwc3_plat_complete(struct device *dev) +{ + dwc3_pm_complete(dev_get_drvdata(dev)); +} + +static int dwc3_plat_prepare(struct device *dev) +{ + return dwc3_pm_prepare(dev_get_drvdata(dev)); +} +#else +#define dwc3_plat_complete NULL +#define dwc3_plat_prepare NULL #endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops dwc3_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) - SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume, - dwc3_runtime_idle) + SET_SYSTEM_SLEEP_PM_OPS(dwc3_plat_suspend, dwc3_plat_resume) + .complete = dwc3_plat_complete, + .prepare = dwc3_plat_prepare, + /* + * Runtime suspend halts the controller on disconnection. It relies on + * platforms with custom connection notification to start the controller + * again. + */ + SET_RUNTIME_PM_OPS(dwc3_plat_runtime_suspend, dwc3_plat_runtime_resume, + dwc3_plat_runtime_idle) }; #ifdef CONFIG_OF |