diff options
Diffstat (limited to 'drivers/usb/dwc3/core.h')
| -rw-r--r-- | drivers/usb/dwc3/core.h | 55 |
1 files changed, 44 insertions, 11 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index eab81dfdcc35..a5fc92c4ffa3 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -81,7 +81,7 @@ #define DWC3_GSNPSREV_MASK 0xffff #define DWC3_GSNPS_ID(p) (((p) & DWC3_GSNPSID_MASK) >> 16) -/* DWC3 registers memory space boundries */ +/* DWC3 registers memory space boundaries */ #define DWC3_XHCI_REGS_START 0x0 #define DWC3_XHCI_REGS_END 0x7fff #define DWC3_GLOBALS_REGS_START 0xc100 @@ -179,7 +179,7 @@ #define DWC3_OEVTEN 0xcc0C #define DWC3_OSTS 0xcc10 -#define DWC3_LLUCTL 0xd024 +#define DWC3_LLUCTL(n) (0xd024 + ((n) * 0x80)) /* Bit fields */ @@ -425,6 +425,7 @@ /* Global User Control Register 3 */ #define DWC3_GUCTL3_SPLITDISABLE BIT(14) +#define DWC3_GUCTL3_USB20_RETRY_DISABLE BIT(16) /* Device Configuration Register */ #define DWC3_DCFG_NUMLANES(n) (((n) & 0x3) << 30) /* DWC_usb32 only */ @@ -464,6 +465,7 @@ #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) /* These apply for core versions 1.94a and later */ +#define DWC3_DCTL_NYET_THRES_MASK (0xf << 20) #define DWC3_DCTL_NYET_THRES(n) (((n) & 0xf) << 20) #define DWC3_DCTL_KEEP_CONNECT BIT(19) @@ -715,6 +717,7 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @nostream_work: work for handling bulk NoStream * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint @@ -741,6 +744,7 @@ struct dwc3_event_buffer { */ struct dwc3_ep { struct usb_ep endpoint; + struct delayed_work nostream_work; struct list_head cancelled_list; struct list_head pending_list; struct list_head started_list; @@ -763,7 +767,7 @@ struct dwc3_ep { #define DWC3_EP_WAIT_TRANSFER_COMPLETE BIT(7) #define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8) #define DWC3_EP_FORCE_RESTART_STREAM BIT(9) -#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10) +#define DWC3_EP_STREAM_PRIMED BIT(10) #define DWC3_EP_PENDING_CLEAR_STALL BIT(11) #define DWC3_EP_TXFIFO_RESIZED BIT(12) #define DWC3_EP_DELAY_STOP BIT(13) @@ -915,6 +919,7 @@ struct dwc3_hwparams { #define DWC3_MODE(n) ((n) & 0x7) /* HWPARAMS1 */ +#define DWC3_SPRAM_TYPE(n) (((n) >> 23) & 1) #define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15) /* HWPARAMS3 */ @@ -925,6 +930,9 @@ struct dwc3_hwparams { #define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \ (DWC3_NUM_IN_EPS_MASK)) >> 18) +/* HWPARAMS6 */ +#define DWC3_RAM0_DEPTH(n) (((n) & (0xffff0000)) >> 16) + /* HWPARAMS7 */ #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) @@ -937,18 +945,14 @@ struct dwc3_hwparams { * @request: struct usb_request to be transferred * @list: a list_head used for request queueing * @dep: struct dwc3_ep owning this request - * @sg: pointer to first incomplete sg * @start_sg: pointer to the sg which should be queued next * @num_pending_sgs: counter to pending sgs - * @num_queued_sgs: counter to the number of sgs which already got queued * @remaining: amount of data remaining * @status: internal dwc3 request status tracking * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb * @trb_dma: DMA address of @trb * @num_trbs: number of TRBs used by this request - * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP - * or unaligned OUT) * @direction: IN or OUT direction flag * @mapped: true when request has been dma-mapped */ @@ -956,11 +960,9 @@ struct dwc3_request { struct usb_request request; struct list_head list; struct dwc3_ep *dep; - struct scatterlist *sg; struct scatterlist *start_sg; unsigned int num_pending_sgs; - unsigned int num_queued_sgs; unsigned int remaining; unsigned int status; @@ -978,7 +980,6 @@ struct dwc3_request { unsigned int num_trbs; - unsigned int needs_extra_trb:1; unsigned int direction:1; unsigned int mapped:1; }; @@ -992,6 +993,17 @@ struct dwc3_scratchpad_array { }; /** + * struct dwc3_glue_ops - The ops indicate the notifications that + * need to be passed on to glue layer + * @pre_set_role: Notify glue of role switch notifications + * @pre_run_stop: Notify run stop enable/disable information to glue + */ +struct dwc3_glue_ops { + void (*pre_set_role)(struct dwc3 *dwc, enum usb_role role); + void (*pre_run_stop)(struct dwc3 *dwc, bool is_on); +}; + +/** * struct dwc3 - representation of our controller * @drd_work: workqueue used for role swapping * @ep0_trb: trb which is used for the ctrl_req @@ -1011,6 +1023,7 @@ struct dwc3_scratchpad_array { * @eps: endpoint array * @gadget: device side representation of the peripheral controller * @gadget_driver: pointer to the gadget driver + * @glue_ops: Vendor callbacks for flattened device implementations. * @bus_clk: clock for accessing the registers * @ref_clk: reference clock * @susp_clk: clock used when the SS phy is in low power (S3) state @@ -1082,6 +1095,7 @@ struct dwc3_scratchpad_array { * @tx_max_burst_prd: max periodic ESS transmit burst size * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize * @clear_stall_protocol: endpoint number that requires a delayed status phase + * @num_hc_interrupters: number of host controller interrupters * @hsphy_interface: "utmi" or "ulpi" * @connected: true when we're connected to a host, false otherwise * @softconnect: true when gadget connect is called, false when disconnect runs @@ -1163,6 +1177,9 @@ struct dwc3_scratchpad_array { * @gsbuscfg0_reqinfo: store GSBUSCFG0.DATRDREQINFO, DESRDREQINFO, * DATWRREQINFO, and DESWRREQINFO value passed from * glue driver. + * @wakeup_pending_funcs: Indicates whether any interface has requested for + * function wakeup in bitmap format where bit position + * represents interface_id. */ struct dwc3 { struct work_struct drd_work; @@ -1192,6 +1209,8 @@ struct dwc3 { struct usb_gadget *gadget; struct usb_gadget_driver *gadget_driver; + const struct dwc3_glue_ops *glue_ops; + struct clk *bus_clk; struct clk *ref_clk; struct clk *susp_clk; @@ -1329,6 +1348,7 @@ struct dwc3 { u8 tx_max_burst_prd; u8 tx_fifo_resize_max_num; u8 clear_stall_protocol; + u16 num_hc_interrupters; const char *hsphy_interface; @@ -1393,6 +1413,7 @@ struct dwc3 { int num_ep_resized; struct dentry *debug_root; u32 gsbuscfg0_reqinfo; + u32 wakeup_pending_funcs; }; #define INCRX_BURST_MODE 0 @@ -1557,7 +1578,7 @@ struct dwc3_gadget_ep_cmd_params { #define DWC3_HAS_OTG BIT(3) /* prototypes */ -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode); +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy); void dwc3_set_mode(struct dwc3 *dwc, u32 mode); u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); @@ -1607,6 +1628,18 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc); int dwc3_core_soft_reset(struct dwc3 *dwc); void dwc3_enable_susphy(struct dwc3 *dwc, bool enable); +static inline void dwc3_pre_set_role(struct dwc3 *dwc, enum usb_role role) +{ + if (dwc->glue_ops && dwc->glue_ops->pre_set_role) + dwc->glue_ops->pre_set_role(dwc, role); +} + +static inline void dwc3_pre_run_stop(struct dwc3 *dwc, bool is_on) +{ + if (dwc->glue_ops && dwc->glue_ops->pre_run_stop) + dwc->glue_ops->pre_run_stop(dwc, is_on); +} + #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); void dwc3_host_exit(struct dwc3 *dwc); |