diff options
Diffstat (limited to 'drivers/usb/dwc3/dwc3-am62.c')
| -rw-r--r-- | drivers/usb/dwc3/dwc3-am62.c | 228 |
1 files changed, 157 insertions, 71 deletions
diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c index 173cf3579c55..e11d7643f966 100644 --- a/drivers/usb/dwc3/dwc3-am62.c +++ b/drivers/usb/dwc3/dwc3-am62.c @@ -11,12 +11,14 @@ #include <linux/platform_device.h> #include <linux/mfd/syscon.h> #include <linux/of.h> -#include <linux/of_device.h> +#include <linux/of_platform.h> #include <linux/pm_runtime.h> #include <linux/clk.h> #include <linux/regmap.h> #include <linux/pinctrl/consumer.h> +#include "core.h" + /* USB WRAPPER register offsets */ #define USBSS_PID 0x0 #define USBSS_OVERCURRENT_CTRL 0x4 @@ -45,6 +47,10 @@ #define USBSS_PHY_VBUS_SEL_SHIFT 1 #define USBSS_PHY_LANE_REVERSE BIT(0) +/* CORE STAT register bits */ +#define USBSS_CORE_OPERATIONAL_MODE_MASK GENMASK(13, 12) +#define USBSS_CORE_OPERATIONAL_MODE_SHIFT 12 + /* MODE CONTROL register bits */ #define USBSS_MODE_VALID BIT(0) @@ -54,6 +60,13 @@ #define USBSS_WAKEUP_CFG_SESSVALID_EN BIT(1) #define USBSS_WAKEUP_CFG_VBUSVALID_EN BIT(0) +#define USBSS_WAKEUP_CFG_ALL (USBSS_WAKEUP_CFG_VBUSVALID_EN | \ + USBSS_WAKEUP_CFG_SESSVALID_EN | \ + USBSS_WAKEUP_CFG_LINESTATE_EN | \ + USBSS_WAKEUP_CFG_OVERCURRENT_EN) + +#define USBSS_WAKEUP_CFG_NONE 0 + /* WAKEUP STAT register bits */ #define USBSS_WAKEUP_STAT_OVERCURRENT BIT(4) #define USBSS_WAKEUP_STAT_LINESTATE BIT(3) @@ -84,12 +97,21 @@ #define USBSS_VBUS_STAT_SESSVALID BIT(2) #define USBSS_VBUS_STAT_VBUSVALID BIT(0) -/* Mask for PHY PLL REFCLK */ +/* USB_PHY_CTRL register bits in CTRL_MMR */ +#define PHY_CORE_VOLTAGE_MASK BIT(31) #define PHY_PLL_REFCLK_MASK GENMASK(3, 0) +/* USB PHY2 register offsets */ +#define USB_PHY_PLL_REG12 0x130 +#define USB_PHY_PLL_LDO_REF_EN BIT(5) +#define USB_PHY_PLL_LDO_REF_EN_EN BIT(4) + #define DWC3_AM62_AUTOSUSPEND_DELAY 100 -struct dwc3_data { +#define USBSS_DEBUG_CFG_OFF 0x0 +#define USBSS_DEBUG_CFG_DISABLED 0x7 + +struct dwc3_am62 { struct device *dev; void __iomem *usbss; struct clk *usb2_refclk; @@ -97,6 +119,8 @@ struct dwc3_data { struct regmap *syscon; unsigned int offset; unsigned int vbus_divider; + u32 wakeup_stat; + void __iomem *phy_regs; }; static const int dwc3_ti_rate_table[] = { /* in KHZ */ @@ -115,40 +139,40 @@ static const int dwc3_ti_rate_table[] = { /* in KHZ */ 52000, }; -static inline u32 dwc3_ti_readl(struct dwc3_data *data, u32 offset) +static inline u32 dwc3_ti_readl(struct dwc3_am62 *am62, u32 offset) { - return readl((data->usbss) + offset); + return readl((am62->usbss) + offset); } -static inline void dwc3_ti_writel(struct dwc3_data *data, u32 offset, u32 value) +static inline void dwc3_ti_writel(struct dwc3_am62 *am62, u32 offset, u32 value) { - writel(value, (data->usbss) + offset); + writel(value, (am62->usbss) + offset); } -static int phy_syscon_pll_refclk(struct dwc3_data *data) +static int phy_syscon_pll_refclk(struct dwc3_am62 *am62) { - struct device *dev = data->dev; + struct device *dev = am62->dev; struct device_node *node = dev->of_node; - struct of_phandle_args args; struct regmap *syscon; int ret; - syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-phy-pll-refclk"); + syscon = syscon_regmap_lookup_by_phandle_args(node, "ti,syscon-phy-pll-refclk", + 1, &am62->offset); if (IS_ERR(syscon)) { dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n"); return PTR_ERR(syscon); } - data->syscon = syscon; + am62->syscon = syscon; - ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-phy-pll-refclk", 1, - 0, &args); - if (ret) + /* Core voltage. PHY_CORE_VOLTAGE bit Recommended to be 0 always */ + ret = regmap_update_bits(am62->syscon, am62->offset, PHY_CORE_VOLTAGE_MASK, 0); + if (ret) { + dev_err(dev, "failed to set phy core voltage\n"); return ret; + } - data->offset = args.args[0]; - - ret = regmap_update_bits(data->syscon, data->offset, PHY_PLL_REFCLK_MASK, data->rate_code); + ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code); if (ret) { dev_err(dev, "failed to set phy pll reference clock rate\n"); return ret; @@ -157,36 +181,69 @@ static int phy_syscon_pll_refclk(struct dwc3_data *data) return 0; } +static int dwc3_ti_init(struct dwc3_am62 *am62) +{ + int ret; + u32 reg; + + /* Read the syscon property and set the rate code */ + ret = phy_syscon_pll_refclk(am62); + if (ret) + return ret; + + /* Workaround Errata i2409 */ + if (am62->phy_regs) { + reg = readl(am62->phy_regs + USB_PHY_PLL_REG12); + reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN; + writel(reg, am62->phy_regs + USB_PHY_PLL_REG12); + } + + /* VBUS divider select */ + reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG); + if (am62->vbus_divider) + reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT; + + dwc3_ti_writel(am62, USBSS_PHY_CONFIG, reg); + + clk_prepare_enable(am62->usb2_refclk); + + /* Set mode valid bit to indicate role is valid */ + reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); + reg |= USBSS_MODE_VALID; + dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); + + return 0; +} + static int dwc3_ti_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; - struct dwc3_data *data; - int i, ret; + struct dwc3_am62 *am62; unsigned long rate; - u32 reg; + int i, ret; - data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); - if (!data) + am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL); + if (!am62) return -ENOMEM; - data->dev = dev; - platform_set_drvdata(pdev, data); + am62->dev = dev; + platform_set_drvdata(pdev, am62); - data->usbss = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(data->usbss)) { + am62->usbss = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(am62->usbss)) { dev_err(dev, "can't map IOMEM resource\n"); - return PTR_ERR(data->usbss); + return PTR_ERR(am62->usbss); } - data->usb2_refclk = devm_clk_get(dev, "ref"); - if (IS_ERR(data->usb2_refclk)) { + am62->usb2_refclk = devm_clk_get(dev, "ref"); + if (IS_ERR(am62->usb2_refclk)) { dev_err(dev, "can't get usb2_refclk\n"); - return PTR_ERR(data->usb2_refclk); + return PTR_ERR(am62->usb2_refclk); } /* Calculate the rate code */ - rate = clk_get_rate(data->usb2_refclk); + rate = clk_get_rate(am62->usb2_refclk); rate /= 1000; // To KHz for (i = 0; i < ARRAY_SIZE(dwc3_ti_rate_table); i++) { if (dwc3_ti_rate_table[i] == rate) @@ -198,20 +255,19 @@ static int dwc3_ti_probe(struct platform_device *pdev) return -EINVAL; } - data->rate_code = i; + am62->rate_code = i; - /* Read the syscon property and set the rate code */ - ret = phy_syscon_pll_refclk(data); - if (ret) - return ret; + am62->phy_regs = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(am62->phy_regs)) { + dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n"); + am62->phy_regs = NULL; + } - /* VBUS divider select */ - data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); - reg = dwc3_ti_readl(data, USBSS_PHY_CONFIG); - if (data->vbus_divider) - reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT; + am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); - dwc3_ti_writel(data, USBSS_PHY_CONFIG, reg); + ret = dwc3_ti_init(am62); + if (ret) + return ret; pm_runtime_set_active(dev); pm_runtime_enable(dev); @@ -219,7 +275,6 @@ static int dwc3_ti_probe(struct platform_device *pdev) * Don't ignore its dependencies with its children */ pm_suspend_ignore_children(dev, false); - clk_prepare_enable(data->usb2_refclk); pm_runtime_get_noresume(dev); ret = of_platform_populate(node, NULL, NULL, dev); @@ -228,70 +283,101 @@ static int dwc3_ti_probe(struct platform_device *pdev) goto err_pm_disable; } - /* Set mode valid bit to indicate role is valid */ - reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL); - reg |= USBSS_MODE_VALID; - dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg); + /* Device has capability to wakeup system from sleep */ + device_set_wakeup_capable(dev, true); + ret = device_wakeup_enable(dev); + if (ret) + dev_err(dev, "couldn't enable device as a wakeup source: %d\n", ret); /* Setting up autosuspend */ pm_runtime_set_autosuspend_delay(dev, DWC3_AM62_AUTOSUSPEND_DELAY); pm_runtime_use_autosuspend(dev); - pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); return 0; err_pm_disable: - clk_disable_unprepare(data->usb2_refclk); + clk_disable_unprepare(am62->usb2_refclk); pm_runtime_disable(dev); pm_runtime_set_suspended(dev); return ret; } -static int dwc3_ti_remove_core(struct device *dev, void *c) -{ - struct platform_device *pdev = to_platform_device(dev); - - platform_device_unregister(pdev); - return 0; -} - -static int dwc3_ti_remove(struct platform_device *pdev) +static void dwc3_ti_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct dwc3_data *data = platform_get_drvdata(pdev); + struct dwc3_am62 *am62 = platform_get_drvdata(pdev); u32 reg; - device_for_each_child(dev, NULL, dwc3_ti_remove_core); + pm_runtime_get_sync(dev); + device_init_wakeup(dev, false); + of_platform_depopulate(dev); /* Clear mode valid bit */ - reg = dwc3_ti_readl(data, USBSS_MODE_CONTROL); + reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); reg &= ~USBSS_MODE_VALID; - dwc3_ti_writel(data, USBSS_MODE_CONTROL, reg); + dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); pm_runtime_put_sync(dev); - clk_disable_unprepare(data->usb2_refclk); pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); pm_runtime_set_suspended(dev); - - platform_set_drvdata(pdev, NULL); - return 0; } #ifdef CONFIG_PM static int dwc3_ti_suspend_common(struct device *dev) { - struct dwc3_data *data = dev_get_drvdata(dev); + struct dwc3_am62 *am62 = dev_get_drvdata(dev); + u32 reg, current_prtcap_dir; + + if (device_may_wakeup(dev)) { + reg = dwc3_ti_readl(am62, USBSS_CORE_STAT); + current_prtcap_dir = (reg & USBSS_CORE_OPERATIONAL_MODE_MASK) + >> USBSS_CORE_OPERATIONAL_MODE_SHIFT; + /* Set wakeup config enable bits */ + reg = dwc3_ti_readl(am62, USBSS_WAKEUP_CONFIG); + if (current_prtcap_dir == DWC3_GCTL_PRTCAP_HOST) { + reg = USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN; + } else { + reg = USBSS_WAKEUP_CFG_VBUSVALID_EN | USBSS_WAKEUP_CFG_SESSVALID_EN; + /* + * Enable LINESTATE wake up only if connected to bus + * and in U2/L3 state else it causes spurious wake-up. + */ + } + dwc3_ti_writel(am62, USBSS_WAKEUP_CONFIG, reg); + /* clear wakeup status so we know what caused the wake up */ + dwc3_ti_writel(am62, USBSS_WAKEUP_STAT, USBSS_WAKEUP_STAT_CLR); + } + + /* just to track if module resets on suspend */ + dwc3_ti_writel(am62, USBSS_DEBUG_CFG, USBSS_DEBUG_CFG_DISABLED); - clk_disable_unprepare(data->usb2_refclk); + clk_disable_unprepare(am62->usb2_refclk); return 0; } static int dwc3_ti_resume_common(struct device *dev) { - struct dwc3_data *data = dev_get_drvdata(dev); + struct dwc3_am62 *am62 = dev_get_drvdata(dev); + u32 reg; + + reg = dwc3_ti_readl(am62, USBSS_DEBUG_CFG); + if (reg != USBSS_DEBUG_CFG_DISABLED) { + /* lost power/context */ + dwc3_ti_init(am62); + } else { + dwc3_ti_writel(am62, USBSS_DEBUG_CFG, USBSS_DEBUG_CFG_OFF); + clk_prepare_enable(am62->usb2_refclk); + } + + if (device_may_wakeup(dev)) { + /* Clear wakeup config enable bits */ + dwc3_ti_writel(am62, USBSS_WAKEUP_CONFIG, USBSS_WAKEUP_CFG_NONE); + } - clk_prepare_enable(data->usb2_refclk); + reg = dwc3_ti_readl(am62, USBSS_WAKEUP_STAT); + am62->wakeup_stat = reg; return 0; } |