diff options
Diffstat (limited to 'drivers/usb/gadget/udc/Kconfig')
| -rw-r--r-- | drivers/usb/gadget/udc/Kconfig | 133 |
1 files changed, 45 insertions, 88 deletions
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 3a7179e90f4e..26460340fbc9 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -33,7 +33,7 @@ menu "USB Peripheral Controller" config USB_AT91 tristate "Atmel AT91 USB Device Port" depends on ARCH_AT91 - depends on OF || COMPILE_TEST + depends on OF help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable @@ -59,8 +59,8 @@ config USB_ATMEL_USBA tristate "Atmel USBA" depends on ARCH_AT91 help - USBA is the integrated high-speed USB Device controller on - the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. + USBA is the integrated high-speed USB Device controller on some + AT91SAM9 and AT91CAP9 processors from Atmel. The fifo_mode parameter is used to select endpoint allocation mode. fifo_mode = 0 is used to let the driver autoconfigure the endpoints. @@ -90,7 +90,7 @@ config USB_BCM63XX_UDC config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" - depends on FSL_SOC || ARCH_MXC + depends on FSL_SOC help Some of Freescale PowerPC and i.MX processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. @@ -102,23 +102,6 @@ config USB_FSL_USB2 dynamically linked module called "fsl_usb2_udc" and force all gadget drivers to also be dynamically linked. -config USB_FUSB300 - tristate "Faraday FUSB300 USB Peripheral Controller" - depends on !PHYS_ADDR_T_64BIT && HAS_DMA - help - Faraday usb device controller FUSB300 driver - -config USB_FOTG210_UDC - depends on HAS_DMA - tristate "Faraday FOTG210 USB Peripheral Controller" - help - Faraday USB2.0 OTG controller which can be configured as - high speed or full speed USB device. This driver supppors - Bulk Transfer so far. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "fotg210_udc". - config USB_GR_UDC tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" depends on HAS_DMA @@ -129,7 +112,6 @@ config USB_GR_UDC config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 @@ -191,9 +173,20 @@ config USB_RENESAS_USBHS_UDC dynamically linked module called "renesas_usbhs" and force all gadget drivers to also be dynamically linked. +config USB_RZV2M_USB3DRD + tristate 'Renesas USB3.1 DRD controller' + depends on ARCH_R9A09G011 || COMPILE_TEST + help + Renesas USB3.1 DRD controller is a USB DRD controller + that supports both host and device switching. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "rzv2m_usb3drd". + config USB_RENESAS_USB3 tristate 'Renesas USB3.0 Peripheral controller' depends on ARCH_RENESAS || COMPILE_TEST + depends on USB_RZV2M_USB3DRD || !USB_RZV2M_USB3DRD depends on EXTCON select USB_ROLE_SWITCH help @@ -204,6 +197,17 @@ config USB_RENESAS_USB3 dynamically linked module called "renesas_usb3" and force all gadget drivers to also be dynamically linked. +config USB_RENESAS_USBF + tristate 'Renesas USB Function controller' + depends on ARCH_RENESAS || COMPILE_TEST + help + Renesas USB Function controller is a USB peripheral controller + available on RZ/N1 Renesas SoCs. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usbf" and force all + gadget drivers to also be dynamically linked. + config USB_PXA27X tristate "PXA 27x" depends on HAS_IOMEM @@ -218,46 +222,6 @@ config USB_PXA27X dynamically linked module called "pxa27x_udc" and force all gadget drivers to also be dynamically linked. -config USB_S3C2410 - tristate "S3C2410 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2410 is an ARM-4 processor with an integrated - full speed USB 1.1 device controller. It has 4 configurable - endpoints, as well as endpoint zero (for control transfers). - - This driver has been tested on the S3C2410, S3C2412, and - S3C2440 processors. - -config USB_S3C2410_DEBUG - bool "S3C2410 udc debug messages" - depends on USB_S3C2410 - -config USB_S3C_HSUDC - tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC - integrated with dual speed USB 2.0 device controller. It has - 8 endpoints, as well as endpoint zero. - - This driver has been tested on S3C2416 and S3C2450 processors. - -config USB_MV_UDC - tristate "Marvell USB2.0 Device Controller" - depends on HAS_DMA - help - Marvell Socs (including PXA and MMP series) include a high speed - USB2.0 OTG controller, which can be configured as high speed or - full speed USB peripheral. - -config USB_MV_U3D - depends on HAS_DMA - tristate "MARVELL PXA2128 USB 3.0 controller" - help - MARVELL PXA2128 Processor series include a super speed USB3.0 device - controller, which support super speed USB peripheral. - config USB_SNP_CORE depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT) depends on HAS_DMA @@ -311,7 +275,7 @@ source "drivers/usb/gadget/udc/bdc/Kconfig" config USB_AMD5536UDC tristate "AMD5536 UDC" - depends on USB_PCI + depends on USB_PCI && HAS_DMA select USB_SNP_CORE help The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. @@ -330,6 +294,7 @@ config USB_AMD5536UDC config USB_FSL_QE tristate "Freescale QE/CPM USB Device Controller" depends on FSL_SOC && (QUICC_ENGINE || CPM) + depends on !64BIT || BROKEN help Some of Freescale PowerPC processors have a Full Speed QE/CPM2 USB controller, which support device mode with 4 @@ -340,29 +305,6 @@ config USB_FSL_QE Set CONFIG_USB_GADGET to "m" to build this driver as a dynamically linked module called "fsl_qe_udc". -config USB_NET2272 - depends on HAS_IOMEM - tristate "PLX NET2272" - help - PLX NET2272 is a USB peripheral controller which supports - both full and high speed USB 2.0 data transfers. - - It has three configurable endpoints, as well as endpoint zero - (for control transfer). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "net2272" and force all - gadget drivers to also be dynamically linked. - -config USB_NET2272_DMA - bool "Support external DMA controller" - depends on USB_NET2272 && HAS_DMA - help - The NET2272 part can optionally support an external DMA - controller, but your board has to have support in the - driver itself. - - If unsure, say "N" here. The driver works fine in PIO mode. - config USB_NET2280 tristate "NetChip NET228x / PLX USB3x8x" depends on USB_PCI @@ -429,7 +371,7 @@ config USB_EG20T config USB_GADGET_XILINX tristate "Xilinx USB Driver" depends on HAS_DMA - depends on OF || COMPILE_TEST + depends on OF help USB peripheral controller driver for Xilinx USB2 device. Xilinx USB2 device is a soft IP which supports both full @@ -462,8 +404,23 @@ config USB_TEGRA_XUDC dynamically linked module called "tegra_xudc" and force all gadget drivers to also be dynamically linked. +config USB_ASPEED_UDC + tristate "Aspeed UDC driver support" + depends on ARCH_ASPEED || COMPILE_TEST + depends on USB_LIBCOMPOSITE + help + Enables Aspeed USB2.0 Device Controller driver for AST260x + family SoCs. The controller supports 1 control endpoint and + 4 programmable endpoints. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "aspeed_udc" and force all + gadget drivers to also be dynamically linked. + source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig" +source "drivers/usb/gadget/udc/cdns2/Kconfig" + # # LAST -- dummy/emulated controller # @@ -474,7 +431,7 @@ config USB_DUMMY_HCD help This host controller driver emulates USB, looping all data transfer requests back to a USB "gadget driver" in the same host. The host - side is the master; the gadget side is the slave. Gadget drivers + side is the controller; the gadget side is the device. Gadget drivers can be high, full, or low speed; and they have access to endpoints like those from NET2280, PXA2xx, or SA1100 hardware. |