diff options
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 489 |
1 files changed, 203 insertions, 286 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index fa5692dec832..c4f17ce5c77b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # USB Host Controller Drivers # @@ -19,7 +20,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" depends on HAS_DMA && HAS_IOMEM - ---help--- + help The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -27,16 +28,32 @@ config USB_XHCI_HCD module will be called xhci-hcd. if USB_XHCI_HCD +config USB_XHCI_DBGCAP + bool "xHCI support for debug capability" + depends on TTY + help + Say 'Y' to enable the support for the xHCI debug capability. Make + sure that your xHCI host supports the extended debug capability and + you want a TTY serial device based on the xHCI debug capability + before enabling this option. If unsure, say 'N'. config USB_XHCI_PCI - tristate - depends on USB_PCI - default y + tristate + depends on USB_PCI + default y + +config USB_XHCI_PCI_RENESAS + tristate "Support for additional Renesas xHCI controller with firmware" + depends on USB_XHCI_PCI + help + Say 'Y' to enable the support for the Renesas xHCI controller with + firmware. Make sure you have the firmware for the device and + installed on your system for this device to work. + If unsure, say 'N'. config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" - select USB_XHCI_RCAR if ARCH_RENESAS - ---help--- + help Adds an xHCI host driver for a generic platform device, which provides a memory space and an irq. It is also a prerequisite for platform specific drivers that @@ -44,47 +61,93 @@ config USB_XHCI_PLATFORM If unsure, say N. +config USB_XHCI_HISTB + tristate "xHCI support for HiSilicon STB SoCs" + depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST) + help + Say 'Y' to enable the support for the xHCI host controller + found in HiSilicon STB SoCs. + config USB_XHCI_MTK - tristate "xHCI support for Mediatek MT65xx/MT7621" + tristate "xHCI support for MediaTek SoCs" select MFD_SYSCON depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST - ---help--- + help Say 'Y' to enable the support for the xHCI host controller - found in Mediatek MT65xx SoCs. + found in MediaTek SoCs. If unsure, say N. config USB_XHCI_MVEBU - tristate "xHCI support for Marvell Armada 375/38x" + tristate "xHCI support for Marvell Armada 375/38x/37xx" select USB_XHCI_PLATFORM depends on HAS_IOMEM depends on ARCH_MVEBU || COMPILE_TEST - ---help--- + help Say 'Y' to enable the support for the xHCI host controller - found in Marvell Armada 375/38x ARM SOCs. + found in Marvell Armada 375/38x/37xx ARM SOCs. config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" depends on USB_XHCI_PLATFORM depends on ARCH_RENESAS || COMPILE_TEST - ---help--- + default ARCH_RENESAS + help + Say 'Y' to enable the support for the xHCI host controller + found in Renesas R-Car and RZ/G3E alike ARM SoCs. + +config USB_XHCI_RZV2M + bool "xHCI support for Renesas RZ/V2M SoC" + depends on USB_XHCI_RCAR + depends on ARCH_R9A09G011 || COMPILE_TEST + depends on USB_RZV2M_USB3DRD=y || (USB_RZV2M_USB3DRD=USB_XHCI_RCAR) + help Say 'Y' to enable the support for the xHCI host controller - found in Renesas R-Car ARM SoCs. + found in Renesas RZ/V2M SoC. + +config USB_XHCI_SIDEBAND + bool "xHCI support for sideband" + help + Say 'Y' to enable the support for the xHCI sideband capability. + Provide a mechanism for a sideband datapath for payload associated + with audio class endpoints. This allows for an audio DSP to use + xHCI USB endpoints directly, allowing CPU to sleep while playing + audio. config USB_XHCI_TEGRA tristate "xHCI support for NVIDIA Tegra SoCs" depends on PHY_TEGRA_XUSB depends on RESET_CONTROLLER select FW_LOADER - ---help--- + help Say 'Y' to enable the support for the xHCI host controller found in NVIDIA Tegra124 and later SoCs. endif # USB_XHCI_HCD +config USB_EHCI_BRCMSTB + tristate + +config USB_BRCMSTB + tristate "Broadcom STB USB support" + depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_BRCMSTB if USB_EHCI_HCD + select USB_XHCI_PLATFORM if USB_XHCI_HCD + help + Enables support for XHCI, EHCI and OHCI host controllers + found in Broadcom STB SoC's. + + To compile these drivers as modules, choose M here: the + modules will be called ohci-platform.ko, ehci-brcm.ko and + xhci-plat-hcd.ko + + Disabling this will keep the controllers and corresponding + PHYs powered down. + config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" depends on HAS_DMA && HAS_IOMEM - ---help--- + help The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to @@ -98,7 +161,7 @@ config USB_EHCI_HCD Controller Driver or UHCI (for Via motherboards) Host Controller Driver too. - You may want to read <file:Documentation/usb/ehci.txt>. + You may want to read <file:Documentation/usb/ehci.rst>. To compile this driver as a module, choose M here: the module will be called ehci-hcd. @@ -106,7 +169,7 @@ config USB_EHCI_HCD config USB_EHCI_ROOT_HUB_TT bool "Root Hub Transaction Translators" depends on USB_EHCI_HCD - ---help--- + help Some EHCI chips have vendor-specific extensions to integrate transaction translators, so that no OHCI or UHCI companion controller is needed. It's safe to say "y" even if your @@ -119,7 +182,7 @@ config USB_EHCI_TT_NEWSCHED bool "Improved Transaction Translator scheduling" depends on USB_EHCI_HCD default y - ---help--- + help This changes the periodic scheduling code to fill more of the low and full speed bandwidth available from the Transaction Translator (TT) in USB 2.0 hubs. Without this, only one transfer will be @@ -142,55 +205,45 @@ config USB_EHCI_PCI depends on USB_PCI default y -config USB_EHCI_HCD_PMC_MSP - tristate "EHCI support for on-chip PMC MSP71xx USB controller" - depends on MSP_HAS_USB - default n - select USB_EHCI_BIG_ENDIAN_DESC - select USB_EHCI_BIG_ENDIAN_MMIO - ---help--- - Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. - If unsure, say N. - config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO - ---help--- + help Xilinx xps USB host controller core is EHCI compliant and has transaction translator built-in. It can be configured to either support both high speed and full speed devices, or high speed devices only. config USB_EHCI_FSL - tristate "Support for Freescale PPC on-chip EHCI USB controller" - depends on FSL_SOC + tristate "Support for Freescale on-chip EHCI USB controller" select USB_EHCI_ROOT_HUB_TT - ---help--- + help Variation of ARC USB block used in some Freescale chips. -config USB_EHCI_MXC - tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on ARCH_MXC - select USB_EHCI_ROOT_HUB_TT - ---help--- - Variation of ARC USB block used in some Freescale chips. +config USB_EHCI_HCD_NPCM7XX + tristate "Support for Nuvoton NPCM on-chip EHCI USB controller" + depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST + default y if (USB_EHCI_HCD && ARCH_NPCM) + help + Enables support for the on-chip EHCI controller on + Nuvoton NPCM chips. config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" - depends on ARCH_OMAP + depends on ARCH_OMAP || COMPILE_TEST depends on NOP_USB_XCEIV - default y - ---help--- + default ARCH_OMAP + help Enables support for the on-chip EHCI controller on OMAP3 and later chips. config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" - depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU) - default y - ---help--- + depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST) + default y if (PLAT_ORION || ARCH_MVEBU) + help Enables support for the on-chip EHCI controller on Marvell's embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, Armada 370. This is different from the EHCI implementation @@ -198,16 +251,16 @@ config USB_EHCI_HCD_ORION Marvell PXA/MMP USB controller" for those. config USB_EHCI_HCD_SPEAR - tristate "Support for ST SPEAr on-chip EHCI USB controller" - depends on USB_EHCI_HCD && PLAT_SPEAR - default y - ---help--- - Enables support for the on-chip EHCI controller on - ST SPEAr chips. + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) + default y if PLAT_SPEAR + help + Enables support for the on-chip EHCI controller on + ST SPEAr chips. config USB_EHCI_HCD_STI tristate "Support for ST STiHxxx on-chip EHCI USB controller" - depends on ARCH_STI && OF + depends on (ARCH_STI || COMPILE_TEST) && OF select GENERIC_PHY select USB_EHCI_HCD_PLATFORM help @@ -215,62 +268,54 @@ config USB_EHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_EHCI_HCD_AT91 - tristate "Support for Atmel on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_AT91 - default y - ---help--- - Enables support for the on-chip EHCI controller on - Atmel chips. - -config USB_EHCI_MSM - tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" - depends on ARCH_QCOM - select USB_EHCI_ROOT_HUB_TT - ---help--- - Enables support for the USB Host controller present on the - Qualcomm chipsets. Root Hub has inbuilt TT. - This driver depends on OTG driver for PHY initialization, - clock management, powering up VBUS, and power management. - This driver is not supported on boards like trout which - has an external PHY. + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST) + default y if ARCH_AT91 + help + Enables support for the on-chip EHCI controller on + Atmel chips. config USB_EHCI_TEGRA - tristate "NVIDIA Tegra HCD support" - depends on ARCH_TEGRA - select USB_EHCI_ROOT_HUB_TT - select USB_PHY - select USB_ULPI - select USB_ULPI_VIEWPORT - help - This driver enables support for the internal USB Host Controllers - found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. + tristate "NVIDIA Tegra HCD support" + depends on ARCH_TEGRA + select USB_CHIPIDEA + select USB_CHIPIDEA_HOST + select USB_CHIPIDEA_TEGRA + select USB_GADGET + help + This option is deprecated now and the driver was removed, use + USB_CHIPIDEA_TEGRA instead. + + Enable support for the internal USB Host Controllers + found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" depends on PPC default y - ---help--- + help Enables support for the USB controller present on the PowerPC OpenFirmware platform bus. config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on SUPERH - ---help--- + depends on SUPERH || COMPILE_TEST + help Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_EXYNOS - tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS - help - Enable support for the Samsung Exynos SOC's on-chip EHCI controller. + tristate "EHCI support for Samsung S5P/Exynos SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + help + Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI + controller. config USB_EHCI_MV - bool "EHCI support for Marvell PXA/MMP USB controller" - depends on (ARCH_PXA || ARCH_MMP) + tristate "EHCI support for Marvell PXA/MMP USB controller" + depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT - ---help--- + help Enables support for Marvell (including PXA and MMP series) on-chip USB SPH and OTG controller. SPH is a single port host, and it can only be EHCI host. OTG is controller that can switch to host mode. @@ -279,41 +324,19 @@ config USB_EHCI_MV Dova, Armada 370 and Armada XP. See "Support for Marvell EBU on-chip EHCI USB controller" for those. -config USB_W90X900_EHCI - tristate "W90X900(W90P910) EHCI support" - depends on ARCH_W90X900 - ---help--- - Enables support for the W90X900 USB controller - -config USB_CNS3XXX_EHCI - bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX - select USB_EHCI_HCD_PLATFORM - ---help--- - This option is deprecated now and the driver was removed, use - USB_EHCI_HCD_PLATFORM instead. - - Enable support for the CNS3XXX SOC's on-chip EHCI controller. - It is needed for high-speed (480Mbit/sec) USB 2.0 device - support. - -config USB_EHCI_ATH79 - bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" - depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) - select USB_EHCI_ROOT_HUB_TT - select USB_EHCI_HCD_PLATFORM - default y - ---help--- - This option is deprecated now and the driver was removed, use - USB_EHCI_HCD_PLATFORM instead. +config USB_OCTEON_HCD + tristate "Cavium Networks Octeon USB support" + depends on CAVIUM_OCTEON_SOC && USB + help + This driver supports USB host controller on some Cavium + Networks' products in the Octeon family. - Enables support for the built-in EHCI controller present - on the Atheros AR7XXX/AR9XXX SoCs. + To compile this driver as a module, choose M here. The module + will be called octeon-hcd. config USB_EHCI_HCD_PLATFORM tristate "Generic EHCI driver for a platform device" - default n - ---help--- + help Adds an EHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -322,7 +345,6 @@ config USB_EHCI_HCD_PLATFORM config USB_OCTEON_EHCI bool "Octeon on-chip EHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC - default n select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select USB_EHCI_HCD_PLATFORM help @@ -339,7 +361,7 @@ endif # USB_EHCI_HCD config USB_OXU210HP_HCD tristate "OXU210HP HCD support" depends on HAS_IOMEM - ---help--- + help The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -352,7 +374,7 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" depends on HAS_IOMEM - ---help--- + help The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -363,8 +385,9 @@ config USB_ISP116X_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on HAS_IOMEM - ---help--- + depends on HAS_IOPORT + depends on COMPILE_TEST # nothing uses this + help Supports the Philips ISP1362 chip as a host controller This driver does not support isochronous transfers. @@ -372,21 +395,10 @@ config USB_ISP1362_HCD To compile this driver as a module, choose M here: the module will be called isp1362-hcd. -config USB_FOTG210_HCD - tristate "FOTG210 HCD support" - depends on USB && HAS_DMA && HAS_IOMEM - ---help--- - Faraday FOTG210 is an OTG controller which can be configured as - an USB2.0 host. It is designed to meet USB2.0 EHCI specification - with minor modification. - - To compile this driver as a module, choose M here: the - module will be called fotg210-hcd. - config USB_MAX3421_HCD tristate "MAX3421 HCD (USB-over-SPI) support" depends on USB && SPI - ---help--- + help The Maxim MAX3421E chip supports standard USB 2.0-compliant full-speed devices either in host or peripheral mode. This driver supports the host-mode of the MAX3421E only. @@ -397,7 +409,7 @@ config USB_MAX3421_HCD config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" depends on HAS_DMA && HAS_IOMEM - ---help--- + help The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's UHCI specification. If your USB host controller follows the OHCI spec, @@ -415,22 +427,21 @@ if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y - ---help--- + help Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_SPEAR - tristate "Support for ST SPEAr on-chip OHCI USB controller" - depends on USB_OHCI_HCD && PLAT_SPEAR - default y - ---help--- - Enables support for the on-chip OHCI controller on - ST SPEAr chips. + tristate "Support for ST SPEAr on-chip OHCI USB controller" + depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) + default y if PLAT_SPEAR + help + Enables support for the on-chip OHCI controller on + ST SPEAr chips. config USB_OHCI_HCD_STI tristate "Support for ST STiHxxx on-chip OHCI USB controller" - depends on ARCH_STI && OF + depends on (ARCH_STI || COMPILE_TEST) && OF select GENERIC_PHY select USB_OHCI_HCD_PLATFORM help @@ -438,43 +449,44 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) - default y - ---help--- - Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + tristate "OHCI support for Samsung S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST) + default ARCH_S3C64XX + help + Enables support for the on-chip OHCI controller on + S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_OHCI_HCD + depends on ARCH_LPC32XX || COMPILE_TEST depends on USB_ISP1301 default y - ---help--- - Enables support for the on-chip OHCI controller on - NXP chips. + help + Enables support for the on-chip OHCI controller on + NXP chips. config USB_OHCI_HCD_PXA27X tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" depends on USB_OHCI_HCD && (PXA27x || PXA3xx) default y - ---help--- + help Enables support for the on-chip OHCI controller on PXA27x/PXA3xx chips. config USB_OHCI_HCD_AT91 tristate "Support for Atmel on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_AT91 && OF - default y - ---help--- - Enables support for the on-chip OHCI controller on - Atmel chips. + depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF + default y if ARCH_AT91 + help + Enables support for the on-chip OHCI controller on + Atmel chips. config USB_OHCI_HCD_OMAP3 tristate "OHCI support for OMAP3 and later chips" - depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5) + depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST select USB_OHCI_HCD_PLATFORM - default y + default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 help This option is deprecated now and the driver was removed, use USB_OHCI_HCD_PLATFORM instead. @@ -484,33 +496,21 @@ config USB_OHCI_HCD_OMAP3 config USB_OHCI_HCD_DAVINCI tristate "OHCI support for TI DaVinci DA8xx" - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST depends on USB_OHCI_HCD select PHY_DA8XX_USB - default y + default y if ARCH_DAVINCI_DA8XX help Enables support for the DaVinci DA8xx integrated OHCI controller. This driver cannot currently be a loadable module because it lacks a proper PHY abstraction. -config USB_OHCI_ATH79 - bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" - depends on (SOC_AR71XX || SOC_AR724X) - select USB_OHCI_HCD_PLATFORM - default y - help - This option is deprecated now and the driver was removed, use - USB_OHCI_HCD_PLATFORM instead. - - Enables support for the built-in OHCI controller present on the - Atheros AR71XX/AR7240 SoCs. - config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" depends on PPC select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO - ---help--- + help Enables support for big-endian USB controllers present on the OpenFirmware platform bus. @@ -518,7 +518,7 @@ config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" depends on PPC select USB_OHCI_LITTLE_ENDIAN - ---help--- + help Enables support for little-endian USB controllers present on the OpenFirmware platform bus. @@ -532,7 +532,7 @@ config USB_OHCI_HCD_PCI depends on USB_PCI default y select USB_OHCI_LITTLE_ENDIAN - ---help--- + help Enables support for PCI-bus plug-in USB controller cards. If unsure, say Y. @@ -541,8 +541,7 @@ config USB_OHCI_HCD_SSB depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM - default n - ---help--- + help This option is deprecated now and the driver was removed, use USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. @@ -554,38 +553,16 @@ config USB_OHCI_HCD_SSB If unsure, say N. -config USB_OHCI_SH - bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on SUPERH - select USB_OHCI_HCD_PLATFORM - ---help--- - This option is deprecated now and the driver was removed, use - USB_OHCI_HCD_PLATFORM instead. - - Enables support for the on-chip OHCI controller on the SuperH. - If you use the PCI OHCI controller, this option is not necessary. - config USB_OHCI_EXYNOS - tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS + tristate "OHCI support for Samsung S5P/Exynos SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help - Enable support for the Samsung Exynos SOC's on-chip OHCI controller. - -config USB_CNS3XXX_OHCI - bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX - select USB_OHCI_HCD_PLATFORM - ---help--- - This option is deprecated now and the driver was removed, use - USB_OHCI_HCD_PLATFORM instead. - - Enable support for the CNS3XXX SOC's on-chip OHCI controller. - It is needed for low-speed USB 1.0 device support. + Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI + controller. config USB_OHCI_HCD_PLATFORM tristate "Generic OHCI driver for a platform device" - default n - ---help--- + help Adds an OHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -610,8 +587,8 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC - ---help--- + depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC + help The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB host controller). If your USB host controller conforms to this @@ -634,16 +611,8 @@ config USB_UHCI_PLATFORM default y if (ARCH_VT8500 || ARCH_ASPEED) config USB_UHCI_ASPEED - bool - default y if ARCH_ASPEED - -config USB_UHCI_BIG_ENDIAN_MMIO bool - default y if SPARC_LEON - -config USB_UHCI_BIG_ENDIAN_DESC - bool - default y if SPARC_LEON + default y if ARCH_ASPEED config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" @@ -662,33 +631,6 @@ config FHCI_DEBUG Say "y" to see some FHCI debug information and statistics through debugfs. -config USB_U132_HCD - tristate "Elan U132 Adapter Host Controller" - depends on USB_FTDI_ELAN - help - The U132 adapter is a USB to CardBus adapter specifically designed - for PC cards that contain an OHCI host controller. Typical PC cards - are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 - adapter will *NOT* work with PC cards that do not contain an OHCI - controller. - - For those PC cards that contain multiple OHCI controllers only the - first one is used. - - The driver consists of two modules, the "ftdi-elan" module is a - USB client driver that interfaces to the FTDI chip within ELAN's - USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host - controller driver that talks to the OHCI controller within the - CardBus cards that are inserted in the U132 adapter. - - This driver has been tested with a CardBus OHCI USB adapter, and - worked with a USB PEN Drive inserted into the first USB port of - the PCCARD. A rather pointless thing to do, but useful for testing. - - It is safe to say M here. - - See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> - config USB_SL811_HCD tristate "SL811HS HCD support" depends on HAS_IOMEM @@ -745,42 +687,6 @@ config USB_RENESAS_USBHS_HCD To compile this driver as a module, choose M here: the module will be called renesas-usbhs. -config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver" - depends on USB_PCI && USB && UWB - select USB_WUSB - select UWB_WHCI - help - A driver for PCI-based Wireless USB Host Controllers that are - compliant with the WHCI specification. - - To compile this driver a module, choose M here: the module - will be called "whci-hcd". - -config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB - select USB_WUSB - select UWB_HWA - help - This driver enables you to connect Wireless USB devices to - your system using a Host Wire Adaptor USB dongle. This is an - UWB Radio Controller and WUSB Host Controller connected to - your machine via USB (specified in WUSB1.0). - - To compile this driver a module, choose M here: the module - will be called "hwa-hc". - -config USB_IMX21_HCD - tristate "i.MX21 HCD support" - depends on ARM && ARCH_MXC - help - This driver enables support for the on-chip USB host in the - i.MX21 processor. - - To compile this driver as a module, choose M here: the - module will be called "imx21-hcd". - config USB_HCD_BCMA tristate "BCMA usb host driver" depends on BCMA @@ -807,7 +713,7 @@ config USB_HCD_SSB config USB_HCD_TEST_MODE bool "HCD test mode support" - ---help--- + help Say 'Y' to enable additional software test modes that may be supported by the host controller drivers. @@ -821,3 +727,14 @@ config USB_HCD_TEST_MODE This option is of interest only to developers who need to validate their USB hardware designs. It is not needed for normal use. If unsure, say N. + +config USB_XEN_HCD + tristate "Xen usb virtual host driver" + depends on XEN + select XEN_XENBUS_FRONTEND + help + The Xen usb virtual host driver serves as a frontend driver enabling + a Xen guest system to access USB Devices passed through to the guest + by the Xen host (usually Dom0). + Only needed if the kernel is running in a Xen guest and generic + access to a USB device is needed. |