diff options
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 127 |
1 files changed, 41 insertions, 86 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 57ca5f97a3dc..c4f17ce5c77b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -40,20 +40,19 @@ config USB_XHCI_DBGCAP config USB_XHCI_PCI tristate depends on USB_PCI - depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS default y config USB_XHCI_PCI_RENESAS tristate "Support for additional Renesas xHCI controller with firmware" + depends on USB_XHCI_PCI help Say 'Y' to enable the support for the Renesas xHCI controller with - firmware. Make sure you have the firwmare for the device and + firmware. Make sure you have the firmware for the device and installed on your system for this device to work. If unsure, say 'N'. config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" - select USB_XHCI_RCAR if ARCH_RENESAS help Adds an xHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -91,9 +90,28 @@ config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" depends on USB_XHCI_PLATFORM depends on ARCH_RENESAS || COMPILE_TEST + default ARCH_RENESAS help Say 'Y' to enable the support for the xHCI host controller - found in Renesas R-Car ARM SoCs. + found in Renesas R-Car and RZ/G3E alike ARM SoCs. + +config USB_XHCI_RZV2M + bool "xHCI support for Renesas RZ/V2M SoC" + depends on USB_XHCI_RCAR + depends on ARCH_R9A09G011 || COMPILE_TEST + depends on USB_RZV2M_USB3DRD=y || (USB_RZV2M_USB3DRD=USB_XHCI_RCAR) + help + Say 'Y' to enable the support for the xHCI host controller + found in Renesas RZ/V2M SoC. + +config USB_XHCI_SIDEBAND + bool "xHCI support for sideband" + help + Say 'Y' to enable the support for the xHCI sideband capability. + Provide a mechanism for a sideband datapath for payload associated + with audio class endpoints. This allows for an audio DSP to use + xHCI USB endpoints directly, allowing CPU to sleep while playing + audio. config USB_XHCI_TEGRA tristate "xHCI support for NVIDIA Tegra SoCs" @@ -205,18 +223,18 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_NPCM7XX - tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller" - depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST - default y if (USB_EHCI_HCD && ARCH_NPCM7XX) + tristate "Support for Nuvoton NPCM on-chip EHCI USB controller" + depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST + default y if (USB_EHCI_HCD && ARCH_NPCM) help Enables support for the on-chip EHCI controller on - Nuvoton NPCM7XX chips. + Nuvoton NPCM chips. config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" - depends on ARCH_OMAP + depends on ARCH_OMAP || COMPILE_TEST depends on NOP_USB_XCEIV - default y + default ARCH_OMAP help Enables support for the on-chip EHCI controller on OMAP3 and later chips. @@ -306,17 +324,15 @@ config USB_EHCI_MV Dova, Armada 370 and Armada XP. See "Support for Marvell EBU on-chip EHCI USB controller" for those. -config USB_CNS3XXX_EHCI - bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX || COMPILE_TEST - select USB_EHCI_HCD_PLATFORM +config USB_OCTEON_HCD + tristate "Cavium Networks Octeon USB support" + depends on CAVIUM_OCTEON_SOC && USB help - This option is deprecated now and the driver was removed, use - USB_EHCI_HCD_PLATFORM instead. + This driver supports USB host controller on some Cavium + Networks' products in the Octeon family. - Enable support for the CNS3XXX SOC's on-chip EHCI controller. - It is needed for high-speed (480Mbit/sec) USB 2.0 device - support. + To compile this driver as a module, choose M here. The module + will be called octeon-hcd. config USB_EHCI_HCD_PLATFORM tristate "Generic EHCI driver for a platform device" @@ -369,7 +385,7 @@ config USB_ISP116X_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on HAS_IOMEM + depends on HAS_IOPORT depends on COMPILE_TEST # nothing uses this help Supports the Philips ISP1362 chip as a host controller @@ -379,17 +395,6 @@ config USB_ISP1362_HCD To compile this driver as a module, choose M here: the module will be called isp1362-hcd. -config USB_FOTG210_HCD - tristate "FOTG210 HCD support" - depends on USB && HAS_DMA && HAS_IOMEM - help - Faraday FOTG210 is an OTG controller which can be configured as - an USB2.0 host. It is designed to meet USB2.0 EHCI specification - with minor modification. - - To compile this driver as a module, choose M here: the - module will be called fotg210-hcd. - config USB_MAX3421_HCD tristate "MAX3421 HCD (USB-over-SPI) support" depends on USB && SPI @@ -422,7 +427,6 @@ if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y help Enables support for the OHCI controller on OMAP1/2 chips. @@ -445,12 +449,12 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) - default y if (ARCH_S3C24XX || ARCH_S3C64XX) + tristate "OHCI support for Samsung S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST) + default ARCH_S3C64XX help Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" @@ -549,17 +553,6 @@ config USB_OHCI_HCD_SSB If unsure, say N. -config USB_OHCI_SH - bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on SUPERH || COMPILE_TEST - select USB_OHCI_HCD_PLATFORM - help - This option is deprecated now and the driver was removed, use - USB_OHCI_HCD_PLATFORM instead. - - Enables support for the on-chip OHCI controller on the SuperH. - If you use the PCI OHCI controller, this option is not necessary. - config USB_OHCI_EXYNOS tristate "OHCI support for Samsung S5P/Exynos SoC Series" depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST @@ -567,17 +560,6 @@ config USB_OHCI_EXYNOS Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI controller. -config USB_CNS3XXX_OHCI - bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX || COMPILE_TEST - select USB_OHCI_HCD_PLATFORM - help - This option is deprecated now and the driver was removed, use - USB_OHCI_HCD_PLATFORM instead. - - Enable support for the CNS3XXX SOC's on-chip OHCI controller. - It is needed for low-speed USB 1.0 device support. - config USB_OHCI_HCD_PLATFORM tristate "Generic OHCI driver for a platform device" help @@ -605,7 +587,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC + depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC help The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -649,33 +631,6 @@ config FHCI_DEBUG Say "y" to see some FHCI debug information and statistics through debugfs. -config USB_U132_HCD - tristate "Elan U132 Adapter Host Controller" - depends on USB_FTDI_ELAN - help - The U132 adapter is a USB to CardBus adapter specifically designed - for PC cards that contain an OHCI host controller. Typical PC cards - are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 - adapter will *NOT* work with PC cards that do not contain an OHCI - controller. - - For those PC cards that contain multiple OHCI controllers only the - first one is used. - - The driver consists of two modules, the "ftdi-elan" module is a - USB client driver that interfaces to the FTDI chip within ELAN's - USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host - controller driver that talks to the OHCI controller within the - CardBus cards that are inserted in the U132 adapter. - - This driver has been tested with a CardBus OHCI USB adapter, and - worked with a USB PEN Drive inserted into the first USB port of - the PCCARD. A rather pointless thing to do, but useful for testing. - - It is safe to say M here. - - See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> - config USB_SL811_HCD tristate "SL811HS HCD support" depends on HAS_IOMEM |