diff options
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
| -rw-r--r-- | drivers/usb/host/ehci-hub.c | 168 |
1 files changed, 20 insertions, 148 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index ce0eaf7d7c12..1aee392e8492 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -14,7 +14,6 @@ */ /*-------------------------------------------------------------------------*/ -#include <linux/usb/otg.h> #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) @@ -346,6 +345,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) unlink_empty_async_suspended(ehci); + /* Some Synopsys controllers mistakenly leave IAA turned on */ + ehci_writel(ehci, STS_IAA, &ehci->regs->status); + /* Any IAA cycle that started before the suspend is now invalid */ end_iaa_cycle(ehci); ehci_handle_start_intr_unlinks(ehci); @@ -641,7 +643,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) * always set, seem to clear PORT_OCC and PORT_CSC when writing to * PORT_POWER; that's surprising, but maybe within-spec. */ - if (!ignore_oc) + if (!ignore_oc && !ehci->spurious_oc) mask = PORT_CSC | PORT_PEC | PORT_OCC; else mask = PORT_CSC | PORT_PEC; @@ -672,7 +674,8 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend) || (ehci->reset_done[i] && time_after_eq( - jiffies, ehci->reset_done[i]))) { + jiffies, ehci->reset_done[i])) + || ehci_has_ci_pec_bug(ehci, temp)) { if (i < 7) buf [0] |= 1 << (i + 1); else @@ -725,145 +728,6 @@ ehci_hub_descriptor ( } /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_USB_HCD_TEST_MODE - -#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06 - -static void usb_ehset_completion(struct urb *urb) -{ - struct completion *done = urb->context; - - complete(done); -} -static int submit_single_step_set_feature( - struct usb_hcd *hcd, - struct urb *urb, - int is_setup -); - -/* - * Allocate and initialize a control URB. This request will be used by the - * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages - * of the GetDescriptor request are sent 15 seconds after the SETUP stage. - * Return NULL if failed. - */ -static struct urb *request_single_step_set_feature_urb( - struct usb_device *udev, - void *dr, - void *buf, - struct completion *done -) { - struct urb *urb; - struct usb_hcd *hcd = bus_to_hcd(udev->bus); - struct usb_host_endpoint *ep; - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) - return NULL; - - urb->pipe = usb_rcvctrlpipe(udev, 0); - ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (!ep) { - usb_free_urb(urb); - return NULL; - } - - urb->ep = ep; - urb->dev = udev; - urb->setup_packet = (void *)dr; - urb->transfer_buffer = buf; - urb->transfer_buffer_length = USB_DT_DEVICE_SIZE; - urb->complete = usb_ehset_completion; - urb->status = -EINPROGRESS; - urb->actual_length = 0; - urb->transfer_flags = URB_DIR_IN; - usb_get_urb(urb); - atomic_inc(&urb->use_count); - atomic_inc(&urb->dev->urbnum); - urb->setup_dma = dma_map_single( - hcd->self.sysdev, - urb->setup_packet, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); - urb->transfer_dma = dma_map_single( - hcd->self.sysdev, - urb->transfer_buffer, - urb->transfer_buffer_length, - DMA_FROM_DEVICE); - urb->context = done; - return urb; -} - -static int ehset_single_step_set_feature(struct usb_hcd *hcd, int port) -{ - int retval = -ENOMEM; - struct usb_ctrlrequest *dr; - struct urb *urb; - struct usb_device *udev; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct usb_device_descriptor *buf; - DECLARE_COMPLETION_ONSTACK(done); - - /* Obtain udev of the rhub's child port */ - udev = usb_hub_find_child(hcd->self.root_hub, port); - if (!udev) { - ehci_err(ehci, "No device attached to the RootHub\n"); - return -ENODEV; - } - buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); - if (!dr) { - kfree(buf); - return -ENOMEM; - } - - /* Fill Setup packet for GetDescriptor */ - dr->bRequestType = USB_DIR_IN; - dr->bRequest = USB_REQ_GET_DESCRIPTOR; - dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8); - dr->wIndex = 0; - dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE); - urb = request_single_step_set_feature_urb(udev, dr, buf, &done); - if (!urb) - goto cleanup; - - /* Submit just the SETUP stage */ - retval = submit_single_step_set_feature(hcd, urb, 1); - if (retval) - goto out1; - if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) { - usb_kill_urb(urb); - retval = -ETIMEDOUT; - ehci_err(ehci, "%s SETUP stage timed out on ep0\n", __func__); - goto out1; - } - msleep(15 * 1000); - - /* Complete remaining DATA and STATUS stages using the same URB */ - urb->status = -EINPROGRESS; - usb_get_urb(urb); - atomic_inc(&urb->use_count); - atomic_inc(&urb->dev->urbnum); - retval = submit_single_step_set_feature(hcd, urb, 0); - if (!retval && !wait_for_completion_timeout(&done, - msecs_to_jiffies(2000))) { - usb_kill_urb(urb); - retval = -ETIMEDOUT; - ehci_err(ehci, "%s IN stage timed out on ep0\n", __func__); - } -out1: - usb_free_urb(urb); -cleanup: - kfree(dr); - kfree(buf); - return retval; -} -#endif /* CONFIG_USB_HCD_TEST_MODE */ -/*-------------------------------------------------------------------------*/ int ehci_hub_control( struct usb_hcd *hcd, @@ -882,12 +746,13 @@ int ehci_hub_control( unsigned selector; /* - * Avoid underflow while calculating (wIndex & 0xff) - 1. - * The compiler might deduce that wIndex can never be 0 and then - * optimize away the tests for !wIndex below. + * Avoid out-of-bounds values while calculating the port index + * from wIndex. The compiler doesn't like pointers to invalid + * addresses, even if they are never used. */ - temp = wIndex & 0xff; - temp -= (temp > 0); + temp = (wIndex - 1) & 0xff; + if (temp >= HCS_N_PORTS_MAX) + temp = 0; status_reg = &ehci->regs->port_status[temp]; hostpc_reg = &ehci->regs->hostpc[temp]; @@ -1011,7 +876,14 @@ int ehci_hub_control( if (temp & PORT_PEC) status |= USB_PORT_STAT_C_ENABLE << 16; - if ((temp & PORT_OCC) && !ignore_oc){ + if (ehci_has_ci_pec_bug(ehci, temp)) { + status |= USB_PORT_STAT_C_ENABLE << 16; + ehci_info(ehci, + "PE is cleared by HW port:%d PORTSC:%08x\n", + wIndex + 1, temp); + } + + if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){ status |= USB_PORT_STAT_C_OVERCURRENT << 16; /* |