diff options
Diffstat (limited to 'drivers/usb/host/ehci-omap.c')
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 81 |
1 files changed, 24 insertions, 57 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 9bd7dfe3315b..db4a1acb27da 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * ehci-omap.c - driver for USBHOST on OMAP3/4 processors * @@ -14,21 +15,6 @@ * Contact: Felipe Balbi <felipe.balbi@nokia.com> * * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/kernel.h> @@ -38,7 +24,6 @@ #include <linux/slab.h> #include <linux/usb/ulpi.h> #include <linux/pm_runtime.h> -#include <linux/gpio.h> #include <linux/clk.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -76,22 +61,18 @@ static inline void ehci_write(void __iomem *base, u32 reg, u32 val) __raw_writel(val, base + reg); } -static inline u32 ehci_read(void __iomem *base, u32 reg) -{ - return __raw_readl(base + reg); -} - /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ static struct hc_driver __read_mostly ehci_omap_hc_driver; -static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { +static const struct ehci_driver_overrides ehci_omap_overrides __initconst = { .extra_priv_size = sizeof(struct omap_hcd), }; /** * ehci_hcd_omap_probe - initialize TI-based HCDs + * @pdev: Pointer to this platform device's information * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it @@ -100,11 +81,11 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { static int ehci_hcd_omap_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct usbhs_omap_platform_data *pdata = dev->platform_data; + struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); struct resource *res; struct usb_hcd *hcd; void __iomem *regs; - int ret = -ENODEV; + int ret; int irq; int i; struct omap_hcd *omap; @@ -119,7 +100,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* For DT boot, get platform data from parent. i.e. usbhshost */ if (dev->of_node) { - pdata = dev->parent->platform_data; + pdata = dev_get_platdata(dev->parent); dev->platform_data = pdata; } @@ -129,13 +110,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "EHCI irq failed\n"); - return -ENODEV; - } + if (irq < 0) + return irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - regs = devm_ioremap_resource(dev, res); + regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(regs)) return PTR_ERR(regs); @@ -144,11 +122,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + ret = -ENODEV; hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); if (!hcd) { @@ -171,17 +149,16 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct usb_phy *phy; /* get the PHY device */ - if (dev->of_node) - phy = devm_usb_get_phy_by_phandle(dev, "phys", i); - else - phy = devm_usb_get_phy_dev(dev, i); + phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { - /* Don't bail out if PHY is not absolutely necessary */ - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + ret = PTR_ERR(phy); + if (ret == -ENODEV) { /* no PHY */ + phy = NULL; continue; + } - ret = PTR_ERR(phy); - dev_err(dev, "Can't get PHY device for port %d: %d\n", + if (ret != -EPROBE_DEFER) + dev_err(dev, "Can't get PHY for port %d: %d\n", i, ret); goto err_phy; } @@ -215,6 +192,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) dev_err(dev, "failed to add hcd with err %d\n", ret); goto err_pm_runtime; } + device_wakeup_enable(hcd->self.controller); /* * Bring PHYs out of reset for non PHY modes. @@ -236,6 +214,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) err_pm_runtime: pm_runtime_put_sync(dev); + pm_runtime_disable(dev); err_phy: for (i = 0; i < omap->nports; i++) { @@ -257,7 +236,7 @@ err_phy: * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. */ -static int ehci_hcd_omap_remove(struct platform_device *pdev) +static void ehci_hcd_omap_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -274,16 +253,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) usb_put_hcd(hcd); pm_runtime_put_sync(dev); pm_runtime_disable(dev); - - return 0; -} - -static void ehci_hcd_omap_shutdown(struct platform_device *pdev) -{ - struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); - - if (hcd->driver->shutdown) - hcd->driver->shutdown(hcd); } static const struct of_device_id omap_ehci_dt_ids[] = { @@ -296,7 +265,7 @@ MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids); static struct platform_driver ehci_hcd_omap_driver = { .probe = ehci_hcd_omap_probe, .remove = ehci_hcd_omap_remove, - .shutdown = ehci_hcd_omap_shutdown, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ehci_hcd_omap_suspend, */ /*.resume = ehci_hcd_omap_resume, */ .driver = { @@ -312,8 +281,6 @@ static int __init ehci_omap_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); return platform_driver_register(&ehci_hcd_omap_driver); } |
