diff options
Diffstat (limited to 'drivers/usb/host/ehci-q.c')
| -rw-r--r-- | drivers/usb/host/ehci-q.c | 42 |
1 files changed, 25 insertions, 17 deletions
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index aa2f77f1506d..ba37a9fcab92 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -29,12 +29,13 @@ /* fill a qtd, returning how much of the buffer we were able to queue up */ -static int +static unsigned int qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf, size_t len, int token, int maxpacket) { - int i, count; + unsigned int count; u64 addr = buf; + int i; /* one buffer entry per 4K ... first might be short or unaligned */ qtd->hw_buf[0] = cpu_to_hc32(ehci, (u32)addr); @@ -190,7 +191,7 @@ static int qtd_copy_status ( int status = -EINPROGRESS; /* count IN/OUT bytes, not SETUP (even short packets) */ - if (likely (QTD_PID (token) != 2)) + if (likely(QTD_PID(token) != PID_CODE_SETUP)) urb->actual_length += length - QTD_LENGTH (token); /* don't modify error codes */ @@ -206,6 +207,13 @@ static int qtd_copy_status ( if (token & QTD_STS_BABBLE) { /* FIXME "must" disable babbling device's port too */ status = -EOVERFLOW; + /* + * When MMF is active and PID Code is IN, queue is halted. + * EHCI Specification, Table 4-13. + */ + } else if ((token & QTD_STS_MMF) && + (QTD_PID(token) == PID_CODE_IN)) { + status = -EPROTO; /* CERR nonzero + halt --> stall */ } else if (QTD_CERR(token)) { status = -EPIPE; @@ -218,7 +226,7 @@ static int qtd_copy_status ( /* fs/ls interrupt xfer missed the complete-split */ status = -EPROTO; } else if (token & QTD_STS_DBE) { - status = (QTD_PID (token) == 1) /* IN ? */ + status = (QTD_PID(token) == PID_CODE_IN) /* IN ? */ ? -ENOSR /* hc couldn't read data */ : -ECOMM; /* hc couldn't write data */ } else if (token & QTD_STS_XACT) { @@ -594,7 +602,7 @@ qh_urb_transaction ( /* SETUP pid */ qtd_fill(ehci, qtd, urb->setup_dma, sizeof (struct usb_ctrlrequest), - token | (2 /* "setup" */ << 8), 8); + token | (PID_CODE_SETUP << 8), 8); /* ... and always at least one more pid */ token ^= QTD_TOGGLE; @@ -608,7 +616,7 @@ qh_urb_transaction ( /* for zero length DATA stages, STATUS is always IN */ if (len == 0) - token |= (1 /* "in" */ << 8); + token |= (PID_CODE_IN << 8); } /* @@ -630,10 +638,10 @@ qh_urb_transaction ( } if (is_input) - token |= (1 /* "in" */ << 8); + token |= (PID_CODE_IN << 8); /* else it's already initted to "out" pid (0 << 8) */ - maxpacket = usb_maxpacket(urb->dev, urb->pipe, !is_input); + maxpacket = usb_endpoint_maxp(&urb->ep->desc); /* * buffer gets wrapped in one or more qtds; @@ -641,7 +649,7 @@ qh_urb_transaction ( * and may serve as a control status ack */ for (;;) { - int this_qtd_len; + unsigned int this_qtd_len; this_qtd_len = qtd_fill(ehci, qtd, buf, this_sg_len, token, maxpacket); @@ -697,7 +705,7 @@ qh_urb_transaction ( if (usb_pipecontrol (urb->pipe)) { one_more = 1; - token ^= 0x0100; /* "in" <--> "out" */ + token ^= (PID_CODE_IN << 8); /* "in" <--> "out" */ token |= QTD_TOGGLE; /* force DATA1 */ } else if (usb_pipeout(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) @@ -863,7 +871,7 @@ qh_make ( switch (urb->dev->speed) { case USB_SPEED_LOW: info1 |= QH_LOW_SPEED; - /* FALL THROUGH */ + fallthrough; case USB_SPEED_FULL: /* EPS 0 means "full" */ @@ -1150,11 +1158,11 @@ submit_async ( * This is done in two parts: first SETUP req for GetDesc is sent then * 15 seconds later, the IN stage for GetDesc starts to req data from dev * - * is_setup : i/p arguement decides which of the two stage needs to be + * is_setup : i/p argument decides which of the two stage needs to be * performed; TRUE - SETUP and FALSE - IN+STATUS * Returns 0 if success */ -static int submit_single_step_set_feature( +static int ehci_submit_single_step_set_feature( struct usb_hcd *hcd, struct urb *urb, int is_setup @@ -1191,7 +1199,7 @@ static int submit_single_step_set_feature( /* SETUP pid, and interrupt after SETUP completion */ qtd_fill(ehci, qtd, urb->setup_dma, sizeof(struct usb_ctrlrequest), - QTD_IOC | token | (2 /* "setup" */ << 8), 8); + QTD_IOC | token | (PID_CODE_SETUP << 8), 8); submit_async(ehci, urb, &qtd_list, GFP_ATOMIC); return 0; /*Return now; we shall come back after 15 seconds*/ @@ -1204,9 +1212,9 @@ static int submit_single_step_set_feature( token ^= QTD_TOGGLE; /*We need to start IN with DATA-1 Pid-sequence*/ buf = urb->transfer_dma; - token |= (1 /* "in" */ << 8); /*This is IN stage*/ + token |= (PID_CODE_IN << 8); /*This is IN stage*/ - maxpacket = usb_maxpacket(urb->dev, urb->pipe, 0); + maxpacket = usb_endpoint_maxp(&urb->ep->desc); qtd_fill(ehci, qtd, buf, len, token, maxpacket); @@ -1217,7 +1225,7 @@ static int submit_single_step_set_feature( qtd->hw_alt_next = EHCI_LIST_END(ehci); /* STATUS stage for GetDesc control request */ - token ^= 0x0100; /* "in" <--> "out" */ + token ^= (PID_CODE_IN << 8); /* "in" <--> "out" */ token |= QTD_TOGGLE; /* force DATA1 */ qtd_prev = qtd; |