1 files changed, 114 insertions, 180 deletions

diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index a4d814b7f380..f6e56c4b9914 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
@@ -17,13 +18,18 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/otg.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-mux.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/signal.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -33,141 +39,33 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-
-/* OMAP-1510 OHCI has its own MMU for DMA */
-#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
-#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
-#define OMAP1510_LB_MMU_CTL	0xfffec208
-#define OMAP1510_LB_MMU_LCK	0xfffec224
-#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
-#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
-#define OMAP1510_LB_MMU_CAM_L	0xfffec230
-#define OMAP1510_LB_MMU_RAM_H	0xfffec234
-#define OMAP1510_LB_MMU_RAM_L	0xfffec238
-
 #define DRIVER_DESC "OHCI OMAP driver"
 
-#ifdef CONFIG_TPS65010
-#include <linux/i2c/tps65010.h>
-#else
-
-#define LOW	0
-#define HIGH	1
-
-#define GPIO1	1
-
-static inline int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
-{
-	return 0;
-}
-
-#endif
-
-static struct clk *usb_host_ck;
-static struct clk *usb_dc_ck;
+struct ohci_omap_priv {
+	struct clk *usb_host_ck;
+	struct clk *usb_dc_ck;
+	struct gpio_desc *power;
+	struct gpio_desc *overcurrent;
+};
 
 static const char hcd_name[] = "ohci-omap";
 static struct hc_driver __read_mostly ohci_omap_hc_driver;
 
-static void omap_ohci_clock_power(int on)
+#define hcd_to_ohci_omap_priv(h) \
+	((struct ohci_omap_priv *)hcd_to_ohci(h)->priv)
+
+static void omap_ohci_clock_power(struct ohci_omap_priv *priv, int on)
 {
 	if (on) {
-		clk_enable(usb_dc_ck);
-		clk_enable(usb_host_ck);
+		clk_enable(priv->usb_dc_ck);
+		clk_enable(priv->usb_host_ck);
 		/* guesstimate for T5 == 1x 32K clock + APLL lock time */
 		udelay(100);
 	} else {
-		clk_disable(usb_host_ck);
-		clk_disable(usb_dc_ck);
-	}
-}
-
-/*
- * Board specific gang-switched transceiver power on/off.
- * NOTE:  OSK supplies power from DC, not battery.
- */
-static int omap_ohci_transceiver_power(int on)
-{
-	if (on) {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (machine_is_omap_osk())
-			tps65010_set_gpio_out_value(GPIO1, LOW);
-	} else {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (machine_is_omap_osk())
-			tps65010_set_gpio_out_value(GPIO1, HIGH);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * OMAP-1510 specific Local Bus clock on/off
- */
-static int omap_1510_local_bus_power(int on)
-{
-	if (on) {
-		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
-		udelay(200);
-	} else {
-		omap_writel(0, OMAP1510_LB_MMU_CTL);
-	}
-
-	return 0;
-}
-
-/*
- * OMAP-1510 specific Local Bus initialization
- * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- *       See also arch/mach-omap/memory.h for __virt_to_dma() and
- *       __dma_to_virt() which need to match with the physical
- *       Local Bus address below.
- */
-static int omap_1510_local_bus_init(void)
-{
-	unsigned int tlb;
-	unsigned long lbaddr, physaddr;
-
-	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
-	       OMAP1510_LB_CLOCK_DIV);
-
-	/* Configure the Local Bus MMU table */
-	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
-		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
-		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
-		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
-		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
-		       OMAP1510_LB_MMU_CAM_L);
-		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
-		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
-		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
-		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+		clk_disable(priv->usb_host_ck);
+		clk_disable(priv->usb_dc_ck);
 	}
-
-	/* Enable the walking table */
-	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
-	udelay(200);
-
-	return 0;
 }
-#else
-#define omap_1510_local_bus_power(x)	{}
-#define omap_1510_local_bus_init()	{}
-#endif
-
-#ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
 {
@@ -187,14 +85,13 @@ static void start_hnp(struct ohci_hcd *ohci)
 	local_irq_restore(flags);
 }
 
-#endif
-
 /*-------------------------------------------------------------------------*/
 
 static int ohci_omap_reset(struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
 	struct omap_usb_config	*config = dev_get_platdata(hcd->self.controller);
+	struct ohci_omap_priv	*priv = hcd_to_ohci_omap_priv(hcd);
 	int			need_transceiver = (config->otg != 0);
 	int			ret;
 
@@ -206,16 +103,11 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 		hcd->power_budget = 8;
 	}
 
-	/* boards can use OTG transceivers in non-OTG modes */
-	need_transceiver = need_transceiver
-			|| machine_is_omap_h2() || machine_is_omap_h3();
-
 	/* XXX OMAP16xx only */
 	if (config->ocpi_enable)
 		config->ocpi_enable();
 
-#ifdef	CONFIG_USB_OTG
-	if (need_transceiver) {
+	if (IS_ENABLED(CONFIG_USB_OTG) && need_transceiver) {
 		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
 		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
 			int	status = otg_set_host(hcd->usb_phy->otg,
@@ -229,16 +121,14 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 		} else {
 			return -EPROBE_DEFER;
 		}
+		hcd->skip_phy_initialization = 1;
 		ohci->start_hnp = start_hnp;
 	}
-#endif
 
-	omap_ohci_clock_power(1);
+	omap_ohci_clock_power(priv, 1);
 
-	if (cpu_is_omap15xx()) {
-		omap_1510_local_bus_power(1);
-		omap_1510_local_bus_init();
-	}
+	if (config->lb_reset)
+		config->lb_reset();
 
 	ret = ohci_setup(hcd);
 	if (ret < 0)
@@ -250,7 +140,7 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 	}
 
 	/* board-specific power switching and overcurrent support */
-	if (machine_is_omap_osk() || machine_is_omap_innovator()) {
+	if (machine_is_omap_osk()) {
 		u32	rh = roothub_a (ohci);
 
 		/* power switching (ganged by default) */
@@ -262,10 +152,8 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 
 			rh &= ~RH_A_NOCP;
 
-			/* gpio9 for overcurrent detction */
+			/* gpio9 for overcurrent detection */
 			omap_cfg_reg(W8_1610_GPIO9);
-			gpio_request(9, "OHCI overcurrent");
-			gpio_direction_input(9);
 
 			/* for paranoia's sake:  disable USB.PUEN */
 			omap_cfg_reg(W4_USB_HIGHZ);
@@ -279,7 +167,11 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 	}
 
 	/* FIXME hub_wq hub requests should manage power switching */
-	omap_ohci_transceiver_power(1);
+	if (config->transceiver_power)
+		return config->transceiver_power(1);
+
+	if (priv->power)
+		gpiod_set_value_cansleep(priv->power, 0);
 
 	/* board init will have already handled HMC and mux setup.
 	 * any external transceiver should already be initialized
@@ -293,7 +185,9 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 
 /**
  * ohci_hcd_omap_probe - initialize OMAP-based HCDs
- * Context: !in_interrupt()
+ * @pdev:	USB controller to probe
+ *
+ * Context: task context, might sleep
  *
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
@@ -303,6 +197,7 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
 {
 	int retval, irq;
 	struct usb_hcd *hcd = 0;
+	struct ohci_omap_priv *priv;
 
 	if (pdev->num_resources != 2) {
 		dev_err(&pdev->dev, "invalid num_resources: %i\n",
@@ -316,34 +211,66 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
-	if (IS_ERR(usb_host_ck))
-		return PTR_ERR(usb_host_ck);
+	hcd = usb_create_hcd(&ohci_omap_hc_driver, &pdev->dev,
+			dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
 
-	if (!cpu_is_omap15xx())
-		usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
-	else
-		usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	priv = hcd_to_ohci_omap_priv(hcd);
 
-	if (IS_ERR(usb_dc_ck)) {
-		clk_put(usb_host_ck);
-		return PTR_ERR(usb_dc_ck);
+	/* Obtain two optional GPIO lines */
+	priv->power = devm_gpiod_get_optional(&pdev->dev, "power", GPIOD_ASIS);
+	if (IS_ERR(priv->power)) {
+		retval = PTR_ERR(priv->power);
+		goto err_put_hcd;
 	}
+	if (priv->power)
+		gpiod_set_consumer_name(priv->power, "OHCI power");
 
+	/*
+	 * This "overcurrent" GPIO line isn't really used in the code,
+	 * but has a designated hardware function.
+	 * TODO: implement proper overcurrent handling.
+	 */
+	priv->overcurrent = devm_gpiod_get_optional(&pdev->dev, "overcurrent",
+						    GPIOD_IN);
+	if (IS_ERR(priv->overcurrent)) {
+		retval = PTR_ERR(priv->overcurrent);
+		goto err_put_hcd;
+	}
+	if (priv->overcurrent)
+		gpiod_set_consumer_name(priv->overcurrent, "OHCI overcurrent");
 
-	hcd = usb_create_hcd(&ohci_omap_hc_driver, &pdev->dev,
-			dev_name(&pdev->dev));
-	if (!hcd) {
-		retval = -ENOMEM;
-		goto err0;
+	priv->usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
+	if (IS_ERR(priv->usb_host_ck)) {
+		retval = PTR_ERR(priv->usb_host_ck);
+		goto err_put_hcd;
 	}
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+	retval = clk_prepare(priv->usb_host_ck);
+	if (retval)
+		goto err_put_host_ck;
+
+	if (!cpu_is_omap15xx())
+		priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
+	else
+		priv->usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
+
+	if (IS_ERR(priv->usb_dc_ck)) {
+		retval = PTR_ERR(priv->usb_dc_ck);
+		goto err_unprepare_host_ck;
+	}
+
+	retval = clk_prepare(priv->usb_dc_ck);
+	if (retval)
+		goto err_put_dc_ck;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dev_dbg(&pdev->dev, "request_mem_region failed\n");
 		retval = -EBUSY;
-		goto err1;
+		goto err_unprepare_dc_ck;
 	}
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
@@ -355,7 +282,7 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
-		retval = -ENXIO;
+		retval = irq;
 		goto err3;
 	}
 	retval = usb_add_hcd(hcd, irq, 0);
@@ -368,11 +295,16 @@ err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
+err_unprepare_dc_ck:
+	clk_unprepare(priv->usb_dc_ck);
+err_put_dc_ck:
+	clk_put(priv->usb_dc_ck);
+err_unprepare_host_ck:
+	clk_unprepare(priv->usb_host_ck);
+err_put_host_ck:
+	clk_put(priv->usb_host_ck);
+err_put_hcd:
 	usb_put_hcd(hcd);
-err0:
-	clk_put(usb_dc_ck);
-	clk_put(usb_host_ck);
 	return retval;
 }
 
@@ -381,32 +313,33 @@ err0:
 
 /**
  * ohci_hcd_omap_remove - shutdown processing for OMAP-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
+ * @pdev: USB Host Controller being removed
+ *
+ * Context: task context, might sleep
  *
  * Reverses the effect of ohci_hcd_omap_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
  */
-static int ohci_hcd_omap_remove(struct platform_device *pdev)
+static void ohci_hcd_omap_remove(struct platform_device *pdev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+	struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
 
 	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
 	usb_remove_hcd(hcd);
-	omap_ohci_clock_power(0);
+	omap_ohci_clock_power(priv, 0);
 	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
 		(void) otg_set_host(hcd->usb_phy->otg, 0);
 		usb_put_phy(hcd->usb_phy);
 	}
-	if (machine_is_omap_osk())
-		gpio_free(9);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	clk_unprepare(priv->usb_dc_ck);
+	clk_put(priv->usb_dc_ck);
+	clk_unprepare(priv->usb_host_ck);
+	clk_put(priv->usb_host_ck);
 	usb_put_hcd(hcd);
-	clk_put(usb_dc_ck);
-	clk_put(usb_host_ck);
-	return 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -417,6 +350,7 @@ static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
 	bool do_wakeup = device_may_wakeup(&pdev->dev);
 	int ret;
 
@@ -428,7 +362,7 @@ static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message)
 	if (ret)
 		return ret;
 
-	omap_ohci_clock_power(0);
+	omap_ohci_clock_power(priv, 0);
 	return ret;
 }
 
@@ -436,12 +370,13 @@ static int ohci_omap_resume(struct platform_device *dev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;
 
-	omap_ohci_clock_power(1);
+	omap_ohci_clock_power(priv, 1);
 	ohci_resume(hcd, false);
 	return 0;
 }
@@ -468,7 +403,8 @@ static struct platform_driver ohci_hcd_omap_driver = {
 
 static const struct ohci_driver_overrides omap_overrides __initconst = {
 	.product_desc	= "OMAP OHCI",
-	.reset		= ohci_omap_reset
+	.reset		= ohci_omap_reset,
+	.extra_priv_size = sizeof(struct ohci_omap_priv),
 };
 
 static int __init ohci_omap_init(void)
@@ -476,8 +412,6 @@ static int __init ohci_omap_init(void)
 	if (usb_disabled())
 		return -ENODEV;
 
-	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
 	ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides);
 	return platform_driver_register(&ohci_hcd_omap_driver);
 }