1 files changed, 86 insertions, 5 deletions

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index a9a1e4c40480..c8f38649f749 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -77,6 +77,16 @@
 #define USB_INTEL_USB3_PSSEN   0xD8
 #define USB_INTEL_USB3PRM      0xDC
 
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
 /*
  * amd_chipset_gen values represent AMD different chipset generations
  */
@@ -88,6 +98,7 @@ enum amd_chipset_gen {
 	AMD_CHIPSET_HUDSON2,
 	AMD_CHIPSET_BOLTON,
 	AMD_CHIPSET_YANGTZE,
+	AMD_CHIPSET_TAISHAN,
 	AMD_CHIPSET_UNKNOWN,
 };
 
@@ -131,6 +142,11 @@ static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
 			pinfo->sb_type.gen = AMD_CHIPSET_SB700;
 		else if (rev >= 0x40 && rev <= 0x4f)
 			pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+	}
+	pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					  0x145c, NULL);
+	if (pinfo->smbus_dev) {
+		pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
 	} else {
 		pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
 				PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
@@ -250,11 +266,12 @@ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
 {
 	/* Make sure amd chipset type has already been initialized */
 	usb_amd_find_chipset_info();
-	if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE)
-		return 0;
-
-	dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
-	return 1;
+	if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+	    amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
+		dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+		return 1;
+	}
+	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
 
@@ -412,6 +429,50 @@ void usb_amd_quirk_pll_disable(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
 
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		usleep_range(40, 60);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
 void usb_amd_quirk_pll_enable(void)
 {
 	usb_amd_quirk_pll(0);
@@ -1096,3 +1157,23 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
+
+bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
+{
+	/*
+	 * Our dear uPD72020{1,2} friend only partially resets when
+	 * asked to via the XHCI interface, and may end up doing DMA
+	 * at the wrong addresses, as it keeps the top 32bit of some
+	 * addresses from its previous programming under obscure
+	 * circumstances.
+	 * Give it a good wack at probe time. Unfortunately, this
+	 * needs to happen before we've had a chance to discover any
+	 * quirk, or the system will be in a rather bad state.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+	    (pdev->device == 0x0014 || pdev->device == 0x0015))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset);