diff options
Diffstat (limited to 'drivers/usb/misc/Kconfig')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 188 |
1 files changed, 136 insertions, 52 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 68d2f2cd17dd..0b56b773dbdf 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -1,11 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 # # USB Miscellaneous driver configuration # comment "USB Miscellaneous drivers" +config USB_USS720 + tristate "USS720 parport driver" + depends on PARPORT + select PARPORT_NOT_PC + help + This driver is for USB parallel port adapters that use the Lucent + Technologies USS-720 chip. These cables are plugged into your USB + port and provide USB compatibility to peripherals designed with + parallel port interfaces. + + The chip has two modes: automatic mode and manual mode. In automatic + mode, it looks to the computer like a standard USB printer. Only + printers may be connected to the USS-720 in this mode. The generic + USB printer driver ("USB Printer support", above) may be used in + that mode, and you can say N here if you want to use the chip only + in this mode. + + Manual mode is not limited to printers, any parallel port + device should work. This driver utilizes manual mode. + Note however that some operations are three orders of magnitude + slower than on a PCI/ISA Parallel Port, so timing critical + applications might not work. + + Say Y here if you own an USS-720 USB->Parport cable and intend to + connect anything other than a printer to it. + + To compile this driver as a module, choose M here: the + module will be called uss720. + config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" - ---help--- + help This driver loads firmware to Emagic EMI 6|2m low latency USB Audio and Midi interface. @@ -15,11 +45,11 @@ config USB_EMI62 This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called audio. If you want to compile it as a - module, say M here and read <file:Documentation/kbuild/modules.txt>. + module, say M here and read <file:Documentation/kbuild/modules.rst>. config USB_EMI26 tristate "EMI 2|6 USB Audio interface support" - ---help--- + help This driver loads firmware to Emagic EMI 2|6 low latency USB Audio interface. @@ -46,16 +76,6 @@ config USB_SEVSEG To compile this driver as a module, choose M here: the module will be called usbsevseg. -config USB_RIO500 - tristate "USB Diamond Rio500 support" - help - Say Y here if you want to connect a USB Rio500 mp3 player to your - computer's USB port. Please read <file:Documentation/usb/rio.txt> - for more information. - - To compile this driver as a module, choose M here: the - module will be called rio500. - config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" help @@ -66,7 +86,7 @@ config USB_LEGOTOWER inserted in and removed from the running kernel whenever you want). The module will be called legousbtower. If you want to compile it as a module, say M here and read - <file:Documentation/kbuild/modules.txt>. + <file:Documentation/kbuild/modules.rst>. config USB_LCD tristate "USB LCD driver support" @@ -87,7 +107,7 @@ config USB_CYPRESS_CY7C63 driver supports the pre-programmed devices (incl. firmware) by AK Modul-Bus Computer GmbH. - Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html + Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html To compile this driver as a module, choose M here: the module will be called cypress_cy7c63. @@ -115,38 +135,65 @@ config USB_IDMOUSE This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". - See also <http://www.fs.tum.de/~echtler/idmouse/>. - -config USB_FTDI_ELAN - tristate "Elan PCMCIA CardBus Adapter USB Client" - help - ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. - Currently only the U132 adapter is available. - - The U132 is specifically designed for CardBus PC cards that contain - an OHCI host controller. Typical PC cards are the Orange Mobile 3G - Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work - with PC cards that do not contain an OHCI controller. To use a U132 - adapter you will need this "ftdi-elan" module as well as the "u132-hcd" - module which is a USB host controller driver that talks to the OHCI - controller within CardBus card that are inserted in the U132 adapter. - - This driver has been tested with a CardBus OHCI USB adapter, and - worked with a USB PEN Drive inserted into the first USB port of - the PCCARD. A rather pointless thing to do, but useful for testing. - - See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" - - It is safe to say M here. + See also <https://www.fs.tum.de/~echtler/idmouse/>. config USB_APPLEDISPLAY tristate "Apple Cinema Display support" - select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE help Say Y here if you want to control the backlight of Apple Cinema Displays over USB. This driver provides a sysfs interface. +config USB_QCOM_EUD + tristate "QCOM Embedded USB Debugger(EUD) Driver" + depends on ARCH_QCOM || COMPILE_TEST + select QCOM_SCM + select USB_ROLE_SWITCH + help + This module enables support for Qualcomm Technologies, Inc. + Embedded USB Debugger (EUD). The EUD is a control peripheral + which reports VBUS attach/detach events and has USB-based + debug and trace capabilities. On selecting m, the module name + that is built is qcom_eud.ko + +config APPLE_MFI_FASTCHARGE + tristate "Fast charge control for iOS devices" + select POWER_SUPPLY + help + Say Y here if you want to control whether iOS devices will + fast charge from the USB interface, as implemented in "MFi" + chargers. + + It is safe to say M here. + +config USB_LJCA + tristate "Intel La Jolla Cove Adapter support" + select AUXILIARY_BUS + depends on USB && ACPI + help + This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO + Master Adapter (LJCA). Additional drivers such as I2C_LJCA, + GPIO_LJCA and SPI_LJCA must be enabled in order to use the + functionality of the device. + + This driver can also be built as a module. If so, the module + will be called usb-ljca. + +config USB_USBIO + tristate "Intel USBIO Bridge support" + depends on USB && ACPI + depends on X86 || COMPILE_TEST + select AUXILIARY_BUS + help + This adds support for Intel USBIO drivers. + This enables the USBIO bridge driver module in charge to talk + to the USB device. Additional drivers such as GPIO_USBIO and + I2C_USBIO must be enabled in order to use the device's full + functionality. + + This driver can also be built as a module. If so, the module + will be called usbio. + source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD @@ -191,8 +238,8 @@ config USB_TEST including sample test device firmware and "how to use it". config USB_EHSET_TEST_FIXTURE - tristate "USB EHSET Test Fixture driver" - help + tristate "USB EHSET Test Fixture driver" + help Say Y here if you want to support the special test fixture device used for the USB-IF Embedded Host High-Speed Electrical Test procedure. @@ -200,8 +247,8 @@ config USB_EHSET_TEST_FIXTURE VID/PID pairs. This driver then initiates a corresponding test mode on the downstream port to which the test fixture is attached. - See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more - information. + See <https://www.usb.org/sites/default/files/EHSET_v1.01%281%29.pdf> + for more information. config USB_ISIGHTFW tristate "iSight firmware loading support" @@ -243,17 +290,17 @@ config USB_HUB_USB251XB Say Y or M here if you need to configure such a device via SMBus. config USB_HSIC_USB3503 - tristate "USB3503 HSIC to USB20 Driver" - depends on I2C - select REGMAP_I2C - help - This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + select REGMAP_I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. config USB_HSIC_USB4604 - tristate "USB4604 HSIC to USB20 Driver" - depends on I2C - help - This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. + tristate "USB4604 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. config USB_LINK_LAYER_TEST tristate "USB Link Layer Test driver" @@ -275,3 +322,40 @@ config USB_CHAOSKEY To compile this driver as a module, choose M here: the module will be called chaoskey. + +config BRCM_USB_PINMAP + tristate "Broadcom pinmap driver support" + depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST + default ARCH_BRCMSTB && PHY_BRCM_USB + help + This option enables support for remapping some USB external + signals, which are typically on dedicated pins on the chip, + to any gpio. + +config USB_ONBOARD_DEV + tristate "Onboard USB device support" + depends on OF + help + Say Y here if you want to support discrete onboard USB devices + that don't require an additional control bus for initialization, + but need some non-trivial form of initialization, such as + enabling a power regulator. An example for such device is the + Realtek RTS5411 hub. + + This driver can be used as a module but its state (module vs + builtin) must match the state of the USB subsystem. Enabling + this config will enable the driver and it will automatically + match the state of the USB subsystem. If this driver is a + module it will be called onboard_usb_dev. + +config USB_ONBOARD_DEV_USB5744 + bool "Onboard USB Microchip usb5744 hub with SMBus support" + depends on (USB_ONBOARD_DEV && I2C=y) || (USB_ONBOARD_DEV=m && I2C=m) + help + Say Y here if you want to support onboard USB Microchip usb5744 + hub that requires SMBus initialization. + + This options enables usb5744 i2c default initialization sequence + during hub start-up configuration stage. It is must to enable this + option on AMD Kria KR260 Robotics Starter Kit as this hub is + connected to USB-SD converter which mounts the root filesystem. |