diff options
Diffstat (limited to 'drivers/usb/misc/Kconfig')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 123 |
1 files changed, 99 insertions, 24 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 8f1144359012..0b56b773dbdf 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -4,6 +4,35 @@ # comment "USB Miscellaneous drivers" +config USB_USS720 + tristate "USS720 parport driver" + depends on PARPORT + select PARPORT_NOT_PC + help + This driver is for USB parallel port adapters that use the Lucent + Technologies USS-720 chip. These cables are plugged into your USB + port and provide USB compatibility to peripherals designed with + parallel port interfaces. + + The chip has two modes: automatic mode and manual mode. In automatic + mode, it looks to the computer like a standard USB printer. Only + printers may be connected to the USS-720 in this mode. The generic + USB printer driver ("USB Printer support", above) may be used in + that mode, and you can say N here if you want to use the chip only + in this mode. + + Manual mode is not limited to printers, any parallel port + device should work. This driver utilizes manual mode. + Note however that some operations are three orders of magnitude + slower than on a PCI/ISA Parallel Port, so timing critical + applications might not work. + + Say Y here if you own an USS-720 USB->Parport cable and intend to + connect anything other than a printer to it. + + To compile this driver as a module, choose M here: the + module will be called uss720. + config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" help @@ -108,28 +137,6 @@ config USB_IDMOUSE See also <https://www.fs.tum.de/~echtler/idmouse/>. -config USB_FTDI_ELAN - tristate "Elan PCMCIA CardBus Adapter USB Client" - help - ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. - Currently only the U132 adapter is available. - - The U132 is specifically designed for CardBus PC cards that contain - an OHCI host controller. Typical PC cards are the Orange Mobile 3G - Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work - with PC cards that do not contain an OHCI controller. To use a U132 - adapter you will need this "ftdi-elan" module as well as the "u132-hcd" - module which is a USB host controller driver that talks to the OHCI - controller within CardBus card that are inserted in the U132 adapter. - - This driver has been tested with a CardBus OHCI USB adapter, and - worked with a USB PEN Drive inserted into the first USB port of - the PCCARD. A rather pointless thing to do, but useful for testing. - - See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" - - It is safe to say M here. - config USB_APPLEDISPLAY tristate "Apple Cinema Display support" select BACKLIGHT_CLASS_DEVICE @@ -137,6 +144,18 @@ config USB_APPLEDISPLAY Say Y here if you want to control the backlight of Apple Cinema Displays over USB. This driver provides a sysfs interface. +config USB_QCOM_EUD + tristate "QCOM Embedded USB Debugger(EUD) Driver" + depends on ARCH_QCOM || COMPILE_TEST + select QCOM_SCM + select USB_ROLE_SWITCH + help + This module enables support for Qualcomm Technologies, Inc. + Embedded USB Debugger (EUD). The EUD is a control peripheral + which reports VBUS attach/detach events and has USB-based + debug and trace capabilities. On selecting m, the module name + that is built is qcom_eud.ko + config APPLE_MFI_FASTCHARGE tristate "Fast charge control for iOS devices" select POWER_SUPPLY @@ -147,6 +166,34 @@ config APPLE_MFI_FASTCHARGE It is safe to say M here. +config USB_LJCA + tristate "Intel La Jolla Cove Adapter support" + select AUXILIARY_BUS + depends on USB && ACPI + help + This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO + Master Adapter (LJCA). Additional drivers such as I2C_LJCA, + GPIO_LJCA and SPI_LJCA must be enabled in order to use the + functionality of the device. + + This driver can also be built as a module. If so, the module + will be called usb-ljca. + +config USB_USBIO + tristate "Intel USBIO Bridge support" + depends on USB && ACPI + depends on X86 || COMPILE_TEST + select AUXILIARY_BUS + help + This adds support for Intel USBIO drivers. + This enables the USBIO bridge driver module in charge to talk + to the USB device. Additional drivers such as GPIO_USBIO and + I2C_USBIO must be enabled in order to use the device's full + functionality. + + This driver can also be built as a module. If so, the module + will be called usbio. + source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD @@ -200,8 +247,8 @@ config USB_EHSET_TEST_FIXTURE VID/PID pairs. This driver then initiates a corresponding test mode on the downstream port to which the test fixture is attached. - See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more - information. + See <https://www.usb.org/sites/default/files/EHSET_v1.01%281%29.pdf> + for more information. config USB_ISIGHTFW tristate "iSight firmware loading support" @@ -284,3 +331,31 @@ config BRCM_USB_PINMAP This option enables support for remapping some USB external signals, which are typically on dedicated pins on the chip, to any gpio. + +config USB_ONBOARD_DEV + tristate "Onboard USB device support" + depends on OF + help + Say Y here if you want to support discrete onboard USB devices + that don't require an additional control bus for initialization, + but need some non-trivial form of initialization, such as + enabling a power regulator. An example for such device is the + Realtek RTS5411 hub. + + This driver can be used as a module but its state (module vs + builtin) must match the state of the USB subsystem. Enabling + this config will enable the driver and it will automatically + match the state of the USB subsystem. If this driver is a + module it will be called onboard_usb_dev. + +config USB_ONBOARD_DEV_USB5744 + bool "Onboard USB Microchip usb5744 hub with SMBus support" + depends on (USB_ONBOARD_DEV && I2C=y) || (USB_ONBOARD_DEV=m && I2C=m) + help + Say Y here if you want to support onboard USB Microchip usb5744 + hub that requires SMBus initialization. + + This options enables usb5744 i2c default initialization sequence + during hub start-up configuration stage. It is must to enable this + option on AMD Kria KR260 Robotics Starter Kit as this hub is + connected to USB-SD converter which mounts the root filesystem. |