diff options
Diffstat (limited to 'drivers/usb/misc/onboard_usb_dev.c')
| -rw-r--r-- | drivers/usb/misc/onboard_usb_dev.c | 190 |
1 files changed, 183 insertions, 7 deletions
diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c index f2bcc1a8b95f..41360a7591e5 100644 --- a/drivers/usb/misc/onboard_usb_dev.c +++ b/drivers/usb/misc/onboard_usb_dev.c @@ -11,6 +11,7 @@ #include <linux/err.h> #include <linux/gpio/consumer.h> #include <linux/init.h> +#include <linux/i2c.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> @@ -29,6 +30,18 @@ #include "onboard_usb_dev.h" +/* USB5744 register offset and mask */ +#define USB5744_CMD_ATTACH 0xAA +#define USB5744_CMD_ATTACH_LSB 0x56 +#define USB5744_CMD_CREG_ACCESS 0x99 +#define USB5744_CMD_CREG_ACCESS_LSB 0x37 +#define USB5744_CREG_MEM_ADDR 0x00 +#define USB5744_CREG_MEM_RD_ADDR 0x04 +#define USB5744_CREG_WRITE 0x00 +#define USB5744_CREG_READ 0x01 +#define USB5744_CREG_RUNTIMEFLAGS2 0x411D +#define USB5744_CREG_BYPASS_UDC_SUSPEND BIT(3) + static void onboard_dev_attach_usb_driver(struct work_struct *work); static struct usb_device_driver onboard_dev_usbdev_driver; @@ -98,6 +111,7 @@ static int onboard_dev_power_on(struct onboard_dev *onboard_dev) fsleep(onboard_dev->pdata->reset_us); gpiod_set_value_cansleep(onboard_dev->reset_gpio, 0); + fsleep(onboard_dev->pdata->power_on_delay_us); onboard_dev->is_powered_on = true; @@ -296,10 +310,126 @@ static void onboard_dev_attach_usb_driver(struct work_struct *work) pr_err("Failed to attach USB driver: %pe\n", ERR_PTR(err)); } +#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744) +static int onboard_dev_5744_i2c_read_byte(struct i2c_client *client, u16 addr, u8 *data) +{ + struct i2c_msg msg[2]; + u8 rd_buf[3]; + int ret; + + u8 wr_buf[7] = {0, USB5744_CREG_MEM_ADDR, 4, + USB5744_CREG_READ, 1, + addr >> 8 & 0xff, + addr & 0xff}; + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = sizeof(wr_buf); + msg[0].buf = wr_buf; + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret < 0) + return ret; + + wr_buf[0] = USB5744_CMD_CREG_ACCESS; + wr_buf[1] = USB5744_CMD_CREG_ACCESS_LSB; + wr_buf[2] = 0; + msg[0].len = 3; + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret < 0) + return ret; + + wr_buf[0] = 0; + wr_buf[1] = USB5744_CREG_MEM_RD_ADDR; + msg[0].len = 2; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = rd_buf; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) + return ret; + *data = rd_buf[1]; + + return 0; +} + +static int onboard_dev_5744_i2c_write_byte(struct i2c_client *client, u16 addr, u8 data) +{ + struct i2c_msg msg[2]; + int ret; + + u8 wr_buf[8] = {0, USB5744_CREG_MEM_ADDR, 5, + USB5744_CREG_WRITE, 1, + addr >> 8 & 0xff, + addr & 0xff, + data}; + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = sizeof(wr_buf); + msg[0].buf = wr_buf; + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret < 0) + return ret; + + msg[0].len = 3; + wr_buf[0] = USB5744_CMD_CREG_ACCESS; + wr_buf[1] = USB5744_CMD_CREG_ACCESS_LSB; + wr_buf[2] = 0; + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret < 0) + return ret; + + return 0; +} + +static int onboard_dev_5744_i2c_init(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int ret; + u8 reg; + + /* + * Set BYPASS_UDC_SUSPEND bit to ensure MCU is always enabled + * and ready to respond to SMBus runtime commands. + * The command writes 5 bytes to memory and single data byte in + * configuration register. + */ + ret = onboard_dev_5744_i2c_read_byte(client, + USB5744_CREG_RUNTIMEFLAGS2, ®); + if (ret) + return dev_err_probe(dev, ret, "CREG_RUNTIMEFLAGS2 read failed\n"); + + reg |= USB5744_CREG_BYPASS_UDC_SUSPEND; + ret = onboard_dev_5744_i2c_write_byte(client, + USB5744_CREG_RUNTIMEFLAGS2, reg); + if (ret) + return dev_err_probe(dev, ret, "BYPASS_UDC_SUSPEND bit configuration failed\n"); + + /* Send SMBus command to boot hub. */ + ret = i2c_smbus_write_word_data(client, USB5744_CMD_ATTACH, + USB5744_CMD_ATTACH_LSB); + if (ret < 0) + return dev_err_probe(dev, ret, "USB Attach with SMBus command failed\n"); + + return ret; +} +#else +static int onboard_dev_5744_i2c_init(struct i2c_client *client) +{ + return -ENODEV; +} +#endif + static int onboard_dev_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct onboard_dev *onboard_dev; + struct device_node *i2c_node; int err; onboard_dev = devm_kzalloc(dev, sizeof(*onboard_dev), GFP_KERNEL); @@ -339,6 +469,31 @@ static int onboard_dev_probe(struct platform_device *pdev) if (err) return err; + i2c_node = of_parse_phandle(pdev->dev.of_node, "i2c-bus", 0); + if (i2c_node) { + struct i2c_client *client = NULL; + +#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744) + client = of_find_i2c_device_by_node(i2c_node); +#endif + of_node_put(i2c_node); + + if (!client) { + err = -EPROBE_DEFER; + goto err_power_off; + } + + if (of_device_is_compatible(pdev->dev.of_node, "usb424,2744") || + of_device_is_compatible(pdev->dev.of_node, "usb424,5744")) { + err = onboard_dev_5744_i2c_init(client); + onboard_dev->always_powered_in_suspend = true; + } + + put_device(&client->dev); + if (err < 0) + goto err_power_off; + } + /* * The USB driver might have been detached from the USB devices by * onboard_dev_remove() (e.g. through an 'unbind' by userspace), @@ -350,6 +505,10 @@ static int onboard_dev_probe(struct platform_device *pdev) schedule_work(&attach_usb_driver_work); return 0; + +err_power_off: + onboard_dev_power_off(onboard_dev); + return err; } static void onboard_dev_remove(struct platform_device *pdev) @@ -393,7 +552,7 @@ static const struct dev_pm_ops __maybe_unused onboard_dev_pm_ops = { static struct platform_driver onboard_dev_driver = { .probe = onboard_dev_probe, - .remove_new = onboard_dev_remove, + .remove = onboard_dev_remove, .driver = { .name = "onboard-usb-dev", @@ -405,9 +564,11 @@ static struct platform_driver onboard_dev_driver = { /************************** USB driver **************************/ +#define VENDOR_ID_BISON 0x5986 #define VENDOR_ID_CYPRESS 0x04b4 #define VENDOR_ID_GENESYS 0x05e3 #define VENDOR_ID_MICROCHIP 0x0424 +#define VENDOR_ID_PARADE 0x1da0 #define VENDOR_ID_REALTEK 0x0bda #define VENDOR_ID_TI 0x0451 #define VENDOR_ID_VIA 0x2109 @@ -454,16 +615,18 @@ static struct onboard_dev *_find_onboard_dev(struct device *dev) return onboard_dev; } +static bool onboard_dev_usbdev_match(struct usb_device *udev) +{ + /* Onboard devices using this driver must have a device tree node */ + return !!udev->dev.of_node; +} + static int onboard_dev_usbdev_probe(struct usb_device *udev) { struct device *dev = &udev->dev; struct onboard_dev *onboard_dev; int err; - /* ignore supported devices without device tree node */ - if (!dev->of_node) - return -ENODEV; - onboard_dev = _find_onboard_dev(dev); if (IS_ERR(onboard_dev)) return PTR_ERR(onboard_dev); @@ -485,8 +648,15 @@ static void onboard_dev_usbdev_disconnect(struct usb_device *udev) } static const struct usb_device_id onboard_dev_id_table[] = { - { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 HUB */ - { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 HUB */ + { USB_DEVICE(VENDOR_ID_BISON, 0x1198) }, /* Bison Electronics Inc. Integrated Camera */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6500) }, /* CYUSB330x 3.0 HUB */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6502) }, /* CYUSB330x 2.0 HUB */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6503) }, /* CYUSB33{0,1}x 2.0 HUB, Vendor Mode */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB331x 3.0 HUB */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB331x 2.0 HUB */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6507) }, /* CYUSB332x 2.0 HUB, Vendor Mode */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6508) }, /* CYUSB332x 3.0 HUB */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x650a) }, /* CYUSB332x 2.0 HUB */ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6570) }, /* CY7C6563x 2.0 HUB */ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 HUB */ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 HUB */ @@ -496,14 +666,19 @@ static const struct usb_device_id onboard_dev_id_table[] = { { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 HUB */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2744) }, /* USB5744 USB 2.0 HUB */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x5744) }, /* USB5744 USB 3.0 HUB */ + { USB_DEVICE(VENDOR_ID_PARADE, 0x5511) }, /* PS5511 USB 3.2 */ + { USB_DEVICE(VENDOR_ID_PARADE, 0x55a1) }, /* PS5511 USB 2.0 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 HUB */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 HUB */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 HUB */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 HUB */ + { USB_DEVICE(VENDOR_ID_REALTEK, 0x0179) }, /* RTL8188ETV 2.4GHz WiFi */ { USB_DEVICE(VENDOR_ID_TI, 0x8025) }, /* TI USB8020B 3.0 HUB */ { USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 HUB */ { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 HUB */ { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 HUB */ + { USB_DEVICE(VENDOR_ID_TI, 0x8440) }, /* TI USB8044 3.0 HUB */ + { USB_DEVICE(VENDOR_ID_TI, 0x8442) }, /* TI USB8044 2.0 HUB */ { USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 HUB */ { USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 HUB */ { USB_DEVICE(VENDOR_ID_XMOS, 0x0013) }, /* XMOS XVF3500 Voice Processor */ @@ -513,6 +688,7 @@ MODULE_DEVICE_TABLE(usb, onboard_dev_id_table); static struct usb_device_driver onboard_dev_usbdev_driver = { .name = "onboard-usb-dev", + .match = onboard_dev_usbdev_match, .probe = onboard_dev_usbdev_probe, .disconnect = onboard_dev_usbdev_disconnect, .generic_subclass = 1, |