diff options
Diffstat (limited to 'drivers/usb/musb/musb_core.c')
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 1326 |
1 files changed, 737 insertions, 589 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 87cbd56cc761..0acc62569ae5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1,35 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * MUSB OTG driver core code * * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * */ /* @@ -97,7 +72,9 @@ #include <linux/kobject.h> #include <linux/prefetch.h> #include <linux/platform_device.h> +#include <linux/string_choices.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/dma-mapping.h> #include <linux/usb.h> #include <linux/usb/of.h> @@ -151,7 +128,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode); /*-------------------------------------------------------------------------*/ -#ifndef CONFIG_BLACKFIN static int musb_ulpi_read(struct usb_phy *phy, u32 reg) { void __iomem *addr = phy->io_priv; @@ -233,10 +209,6 @@ out: return ret; } -#else -#define musb_ulpi_read NULL -#define musb_ulpi_write NULL -#endif static struct usb_phy_io_ops musb_ulpi_access = { .read = musb_ulpi_read, @@ -276,7 +248,7 @@ static u32 musb_default_busctl_offset(u8 epnum, u16 offset) return 0x80 + (0x08 * epnum) + offset; } -static u8 musb_default_readb(const void __iomem *addr, unsigned offset) +static u8 musb_default_readb(void __iomem *addr, u32 offset) { u8 data = __raw_readb(addr + offset); @@ -284,13 +256,13 @@ static u8 musb_default_readb(const void __iomem *addr, unsigned offset) return data; } -static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data) +static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data) { trace_musb_writeb(__builtin_return_address(0), addr, offset, data); __raw_writeb(data, addr + offset); } -static u16 musb_default_readw(const void __iomem *addr, unsigned offset) +static u16 musb_default_readw(void __iomem *addr, u32 offset) { u16 data = __raw_readw(addr + offset); @@ -298,24 +270,42 @@ static u16 musb_default_readw(const void __iomem *addr, unsigned offset) return data; } -static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data) +static void musb_default_writew(void __iomem *addr, u32 offset, u16 data) { trace_musb_writew(__builtin_return_address(0), addr, offset, data); __raw_writew(data, addr + offset); } -static u32 musb_default_readl(const void __iomem *addr, unsigned offset) +static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out) { - u32 data = __raw_readl(addr + offset); + void __iomem *epio = qh->hw_ep->regs; + u16 csr; - trace_musb_readl(__builtin_return_address(0), addr, offset, data); - return data; + if (is_out) + csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; + else + csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; + + return csr; } -static void musb_default_writel(void __iomem *addr, unsigned offset, u32 data) +static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out, + struct urb *urb) { - trace_musb_writel(__builtin_return_address(0), addr, offset, data); - __raw_writel(data, addr + offset); + u16 csr; + u16 toggle; + + toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); + + if (is_out) + csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE + | MUSB_TXCSR_H_DATATOGGLE) + : MUSB_TXCSR_CLRDATATOG; + else + csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE + | MUSB_RXCSR_H_DATATOGGLE) : 0; + + return csr; } /* @@ -408,22 +398,38 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) /* * Old style IO functions */ -u8 (*musb_readb)(const void __iomem *addr, unsigned offset); +u8 (*musb_readb)(void __iomem *addr, u32 offset); EXPORT_SYMBOL_GPL(musb_readb); -void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); +void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data); EXPORT_SYMBOL_GPL(musb_writeb); -u16 (*musb_readw)(const void __iomem *addr, unsigned offset); +u8 (*musb_clearb)(void __iomem *addr, u32 offset); +EXPORT_SYMBOL_GPL(musb_clearb); + +u16 (*musb_readw)(void __iomem *addr, u32 offset); EXPORT_SYMBOL_GPL(musb_readw); -void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); +void (*musb_writew)(void __iomem *addr, u32 offset, u16 data); EXPORT_SYMBOL_GPL(musb_writew); -u32 (*musb_readl)(const void __iomem *addr, unsigned offset); +u16 (*musb_clearw)(void __iomem *addr, u32 offset); +EXPORT_SYMBOL_GPL(musb_clearw); + +u32 musb_readl(void __iomem *addr, u32 offset) +{ + u32 data = __raw_readl(addr + offset); + + trace_musb_readl(__builtin_return_address(0), addr, offset, data); + return data; +} EXPORT_SYMBOL_GPL(musb_readl); -void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); +void musb_writel(void __iomem *addr, u32 offset, u32 data) +{ + trace_musb_writel(__builtin_return_address(0), addr, offset, data); + __raw_writel(data, addr + offset); +} EXPORT_SYMBOL_GPL(musb_writel); #ifndef CONFIG_MUSB_PIO_ONLY @@ -448,6 +454,109 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) return hw_ep->musb->io.write_fifo(hw_ep, len, src); } +static u8 musb_read_devctl(struct musb *musb) +{ + return musb_readb(musb->mregs, MUSB_DEVCTL); +} + +/** + * musb_set_host - set and initialize host mode + * @musb: musb controller driver data + * + * At least some musb revisions need to enable devctl session bit in + * peripheral mode to switch to host mode. Initializes things to host + * mode and sets A_IDLE. SoC glue needs to advance state further + * based on phy provided VBUS state. + * + * Note that the SoC glue code may need to wait for musb to settle + * on enable before calling this to avoid babble. + */ +int musb_set_host(struct musb *musb) +{ + int error = 0; + u8 devctl; + + if (!musb) + return -EINVAL; + + devctl = musb_read_devctl(musb); + if (!(devctl & MUSB_DEVCTL_BDEVICE)) { + trace_musb_state(musb, devctl, "Already in host mode"); + goto init_data; + } + + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + error = readx_poll_timeout(musb_read_devctl, musb, devctl, + !(devctl & MUSB_DEVCTL_BDEVICE), 5000, + 1000000); + if (error) { + dev_err(musb->controller, "%s: could not set host: %02x\n", + __func__, devctl); + + return error; + } + + devctl = musb_read_devctl(musb); + trace_musb_state(musb, devctl, "Host mode set"); + +init_data: + musb->is_active = 1; + musb_set_state(musb, OTG_STATE_A_IDLE); + MUSB_HST_MODE(musb); + + return error; +} +EXPORT_SYMBOL_GPL(musb_set_host); + +/** + * musb_set_peripheral - set and initialize peripheral mode + * @musb: musb controller driver data + * + * Clears devctl session bit and initializes things for peripheral + * mode and sets B_IDLE. SoC glue needs to advance state further + * based on phy provided VBUS state. + */ +int musb_set_peripheral(struct musb *musb) +{ + int error = 0; + u8 devctl; + + if (!musb) + return -EINVAL; + + devctl = musb_read_devctl(musb); + if (devctl & MUSB_DEVCTL_BDEVICE) { + trace_musb_state(musb, devctl, "Already in peripheral mode"); + goto init_data; + } + + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + error = readx_poll_timeout(musb_read_devctl, musb, devctl, + devctl & MUSB_DEVCTL_BDEVICE, 5000, + 1000000); + if (error) { + dev_err(musb->controller, "%s: could not set peripheral: %02x\n", + __func__, devctl); + + return error; + } + + devctl = musb_read_devctl(musb); + trace_musb_state(musb, devctl, "Peripheral mode set"); + +init_data: + musb->is_active = 0; + musb_set_state(musb, OTG_STATE_B_IDLE); + MUSB_DEV_MODE(musb); + + return error; +} +EXPORT_SYMBOL_GPL(musb_set_peripheral); + /*-------------------------------------------------------------------------*/ /* for high speed test mode; see USB 2.0 spec 7.1.20 */ @@ -485,30 +594,30 @@ void musb_load_testpacket(struct musb *musb) /* * Handles OTG hnp timeouts, such as b_ase0_brst */ -static void musb_otg_timer_func(unsigned long data) +static void musb_otg_timer_func(struct timer_list *t) { - struct musb *musb = (struct musb *)data; + struct musb *musb = timer_container_of(musb, t, otg_timer); unsigned long flags; spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->otg->state) { + switch (musb_get_state(musb)) { case OTG_STATE_B_WAIT_ACON: musb_dbg(musb, "HNP: b_wait_acon timeout; back to b_peripheral"); musb_g_disconnect(musb); - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + musb_set_state(musb, OTG_STATE_B_PERIPHERAL); musb->is_active = 0; break; case OTG_STATE_A_SUSPEND: case OTG_STATE_A_WAIT_BCON: musb_dbg(musb, "HNP: %s timeout", - usb_otg_state_string(musb->xceiv->otg->state)); + musb_otg_state_string(musb)); musb_platform_set_vbus(musb, 0); - musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; + musb_set_state(musb, OTG_STATE_A_WAIT_VFALL); break; default: musb_dbg(musb, "HNP: Unhandled mode %s", - usb_otg_state_string(musb->xceiv->otg->state)); + musb_otg_state_string(musb)); } spin_unlock_irqrestore(&musb->lock, flags); } @@ -522,20 +631,18 @@ void musb_hnp_stop(struct musb *musb) void __iomem *mbase = musb->mregs; u8 reg; - musb_dbg(musb, "HNP: stop from %s", - usb_otg_state_string(musb->xceiv->otg->state)); + musb_dbg(musb, "HNP: stop from %s", musb_otg_state_string(musb)); - switch (musb->xceiv->otg->state) { + switch (musb_get_state(musb)) { case OTG_STATE_A_PERIPHERAL: musb_g_disconnect(musb); - musb_dbg(musb, "HNP: back to %s", - usb_otg_state_string(musb->xceiv->otg->state)); + musb_dbg(musb, "HNP: back to %s", musb_otg_state_string(musb)); break; case OTG_STATE_B_HOST: musb_dbg(musb, "HNP: Disabling HR"); if (hcd) hcd->self.is_b_host = 0; - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + musb_set_state(musb, OTG_STATE_B_PERIPHERAL); MUSB_DEV_MODE(musb); reg = musb_readb(mbase, MUSB_POWER); reg |= MUSB_POWER_SUSPENDM; @@ -544,7 +651,7 @@ void musb_hnp_stop(struct musb *musb) break; default: musb_dbg(musb, "HNP: Stopping in unknown state %s", - usb_otg_state_string(musb->xceiv->otg->state)); + musb_otg_state_string(musb)); } /* @@ -557,6 +664,379 @@ void musb_hnp_stop(struct musb *musb) static void musb_recover_from_babble(struct musb *musb); +static void musb_handle_intr_resume(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "RESUME (%s)", musb_otg_state_string(musb)); + + if (devctl & MUSB_DEVCTL_HM) { + switch (musb_get_state(musb)) { + case OTG_STATE_A_SUSPEND: + /* remote wakeup? */ + musb->port1_status |= + (USB_PORT_STAT_C_SUSPEND << 16) + | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + musb_set_state(musb, OTG_STATE_A_HOST); + musb->is_active = 1; + musb_host_resume_root_hub(musb); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); + break; + case OTG_STATE_B_WAIT_ACON: + musb_set_state(musb, OTG_STATE_B_PERIPHERAL); + musb->is_active = 1; + MUSB_DEV_MODE(musb); + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "host", + musb_otg_state_string(musb)); + } + } else { + switch (musb_get_state(musb)) { + case OTG_STATE_A_SUSPEND: + /* possibly DISCONNECT is upcoming */ + musb_set_state(musb, OTG_STATE_A_HOST); + musb_host_resume_root_hub(musb); + break; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_PERIPHERAL: + /* disconnect while suspended? we may + * not get a disconnect irq... + */ + if ((devctl & MUSB_DEVCTL_VBUS) + != (3 << MUSB_DEVCTL_VBUS_SHIFT) + ) { + musb->int_usb |= MUSB_INTR_DISCONNECT; + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + } + musb_g_resume(musb); + break; + case OTG_STATE_B_IDLE: + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "peripheral", + musb_otg_state_string(musb)); + } + } +} + +/* return IRQ_HANDLED to tell the caller to return immediately */ +static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl) +{ + void __iomem *mbase = musb->mregs; + + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS + && (devctl & MUSB_DEVCTL_BDEVICE)) { + musb_dbg(musb, "SessReq while on B state"); + return IRQ_HANDLED; + } + + musb_dbg(musb, "SESSION_REQUEST (%s)", musb_otg_state_string(musb)); + + /* IRQ arrives from ID pin sense or (later, if VBUS power + * is removed) SRP. responses are time critical: + * - turn on VBUS (with silicon-specific mechanism) + * - go through A_WAIT_VRISE + * - ... to A_WAIT_BCON. + * a_wait_vrise_tmout triggers VBUS_ERROR transitions + */ + musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + musb->ep0_stage = MUSB_EP0_START; + musb_set_state(musb, OTG_STATE_A_IDLE); + MUSB_HST_MODE(musb); + musb_platform_set_vbus(musb, 1); + + return IRQ_NONE; +} + +static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl) +{ + int ignore = 0; + + /* During connection as an A-Device, we may see a short + * current spikes causing voltage drop, because of cable + * and peripheral capacitance combined with vbus draw. + * (So: less common with truly self-powered devices, where + * vbus doesn't act like a power supply.) + * + * Such spikes are short; usually less than ~500 usec, max + * of ~2 msec. That is, they're not sustained overcurrent + * errors, though they're reported using VBUSERROR irqs. + * + * Workarounds: (a) hardware: use self powered devices. + * (b) software: ignore non-repeated VBUS errors. + * + * REVISIT: do delays from lots of DEBUG_KERNEL checks + * make trouble here, keeping VBUS < 4.4V ? + */ + switch (musb_get_state(musb)) { + case OTG_STATE_A_HOST: + /* recovery is dicey once we've gotten past the + * initial stages of enumeration, but if VBUS + * stayed ok at the other end of the link, and + * another reset is due (at least for high speed, + * to redo the chirp etc), it might work OK... + */ + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_WAIT_VRISE: + if (musb->vbuserr_retry) { + void __iomem *mbase = musb->mregs; + + musb->vbuserr_retry--; + ignore = 1; + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(mbase, MUSB_DEVCTL, devctl); + } else { + musb->port1_status |= + USB_PORT_STAT_OVERCURRENT + | (USB_PORT_STAT_C_OVERCURRENT << 16); + } + break; + default: + break; + } + + dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, + "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", + musb_otg_state_string(musb), + devctl, + ({ char *s; + switch (devctl & MUSB_DEVCTL_VBUS) { + case 0 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<SessEnd"; break; + case 1 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<AValid"; break; + case 2 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<VBusValid"; break; + /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ + default: + s = "VALID"; break; + } s; }), + VBUSERR_RETRY_COUNT - musb->vbuserr_retry, + musb->port1_status); + + /* go through A_WAIT_VFALL then start a new session */ + if (!ignore) + musb_platform_set_vbus(musb, 0); +} + +static void musb_handle_intr_suspend(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "SUSPEND (%s) devctl %02x", + musb_otg_state_string(musb), devctl); + + switch (musb_get_state(musb)) { + case OTG_STATE_A_PERIPHERAL: + /* We also come here if the cable is removed, since + * this silicon doesn't report ID-no-longer-grounded. + * + * We depend on T(a_wait_bcon) to shut us down, and + * hope users don't do anything dicey during this + * undesired detour through A_WAIT_BCON. + */ + musb_hnp_stop(musb); + musb_host_resume_root_hub(musb); + musb_root_disconnect(musb); + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon + ? : OTG_TIME_A_WAIT_BCON)); + + break; + case OTG_STATE_B_IDLE: + if (!musb->is_active) + break; + fallthrough; + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = musb->g.b_hnp_enable; + if (musb->is_active) { + musb_set_state(musb, OTG_STATE_B_WAIT_ACON); + musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_B_ASE0_BRST)); + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb_set_state(musb, OTG_STATE_A_SUSPEND); + musb->is_active = musb->hcd->self.b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } +} + +static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb) +{ + struct usb_hcd *hcd = musb->hcd; + + musb->is_active = 1; + musb->ep0_stage = MUSB_EP0_START; + + musb->intrtxe = musb->epmask; + musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); + musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED + |USB_PORT_STAT_HIGH_SPEED + |USB_PORT_STAT_ENABLE + ); + musb->port1_status |= USB_PORT_STAT_CONNECTION + |(USB_PORT_STAT_C_CONNECTION << 16); + + /* high vs full speed is just a guess until after reset */ + if (devctl & MUSB_DEVCTL_LSDEV) + musb->port1_status |= USB_PORT_STAT_LOW_SPEED; + + /* indicate new connection to OTG machine */ + switch (musb_get_state(musb)) { + case OTG_STATE_B_PERIPHERAL: + if (int_usb & MUSB_INTR_SUSPEND) { + musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); + int_usb &= ~MUSB_INTR_SUSPEND; + goto b_host; + } else + musb_dbg(musb, "CONNECT as b_peripheral???"); + break; + case OTG_STATE_B_WAIT_ACON: + musb_dbg(musb, "HNP: CONNECT, now b_host"); +b_host: + musb_set_state(musb, OTG_STATE_B_HOST); + if (musb->hcd) + musb->hcd->self.is_b_host = 1; + timer_delete(&musb->otg_timer); + break; + default: + if ((devctl & MUSB_DEVCTL_VBUS) + == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { + musb_set_state(musb, OTG_STATE_A_HOST); + if (hcd) + hcd->self.is_b_host = 0; + } + break; + } + + musb_host_poke_root_hub(musb); + + musb_dbg(musb, "CONNECT (%s) devctl %02x", + musb_otg_state_string(musb), devctl); +} + +static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", + musb_otg_state_string(musb), + MUSB_MODE(musb), devctl); + + switch (musb_get_state(musb)) { + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + musb_host_resume_root_hub(musb); + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_B_HOST: + /* REVISIT this behaves for "real disconnect" + * cases; make sure the other transitions from + * from B_HOST act right too. The B_HOST code + * in hnp_stop() is currently not used... + */ + musb_root_disconnect(musb); + if (musb->hcd) + musb->hcd->self.is_b_host = 0; + musb_set_state(musb, OTG_STATE_B_PERIPHERAL); + MUSB_DEV_MODE(musb); + musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + fallthrough; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + musb_otg_state_string(musb)); + break; + } +} + +/* + * mentor saves a bit: bus reset and babble share the same irq. + * only host sees babble; only peripheral sees bus reset. + */ +static void musb_handle_intr_reset(struct musb *musb) +{ + if (is_host_active(musb)) { + /* + * When BABBLE happens what we can depends on which + * platform MUSB is running, because some platforms + * implemented proprietary means for 'recovering' from + * Babble conditions. One such platform is AM335x. In + * most cases, however, the only thing we can do is + * drop the session. + */ + dev_err(musb->controller, "Babble\n"); + musb_recover_from_babble(musb); + } else { + musb_dbg(musb, "BUS RESET as %s", musb_otg_state_string(musb)); + switch (musb_get_state(musb)) { + case OTG_STATE_A_SUSPEND: + musb_g_reset(musb); + fallthrough; + case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ + /* never use invalid T(a_wait_bcon) */ + musb_dbg(musb, "HNP: in %s, %d msec timeout", + musb_otg_state_string(musb), + TA_WAIT_BCON(musb)); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies(TA_WAIT_BCON(musb))); + break; + case OTG_STATE_A_PERIPHERAL: + timer_delete(&musb->otg_timer); + musb_g_reset(musb); + break; + case OTG_STATE_B_WAIT_ACON: + musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", + musb_otg_state_string(musb)); + musb_set_state(musb, OTG_STATE_B_PERIPHERAL); + musb_g_reset(musb); + break; + case OTG_STATE_B_IDLE: + musb_set_state(musb, OTG_STATE_B_PERIPHERAL); + fallthrough; + case OTG_STATE_B_PERIPHERAL: + musb_g_reset(musb); + break; + default: + musb_dbg(musb, "Unhandled BUS RESET as %s", + musb_otg_state_string(musb)); + } + } +} + /* * Interrupt Service Routine to record USB "global" interrupts. * Since these do not happen often and signify things of @@ -566,7 +1046,6 @@ static void musb_recover_from_babble(struct musb *musb); * @param musb instance pointer * @param int_usb register contents * @param devctl - * @param power */ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, @@ -581,380 +1060,40 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, * spurious RESUME irqs happen too, paired with SUSPEND. */ if (int_usb & MUSB_INTR_RESUME) { + musb_handle_intr_resume(musb, devctl); handled = IRQ_HANDLED; - musb_dbg(musb, "RESUME (%s)", - usb_otg_state_string(musb->xceiv->otg->state)); - - if (devctl & MUSB_DEVCTL_HM) { - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - /* remote wakeup? */ - musb->port1_status |= - (USB_PORT_STAT_C_SUSPEND << 16) - | MUSB_PORT_STAT_RESUME; - musb->rh_timer = jiffies - + msecs_to_jiffies(USB_RESUME_TIMEOUT); - musb->xceiv->otg->state = OTG_STATE_A_HOST; - musb->is_active = 1; - musb_host_resume_root_hub(musb); - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - break; - case OTG_STATE_B_WAIT_ACON: - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - musb->is_active = 1; - MUSB_DEV_MODE(musb); - break; - default: - WARNING("bogus %s RESUME (%s)\n", - "host", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } else { - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - /* possibly DISCONNECT is upcoming */ - musb->xceiv->otg->state = OTG_STATE_A_HOST; - musb_host_resume_root_hub(musb); - break; - case OTG_STATE_B_WAIT_ACON: - case OTG_STATE_B_PERIPHERAL: - /* disconnect while suspended? we may - * not get a disconnect irq... - */ - if ((devctl & MUSB_DEVCTL_VBUS) - != (3 << MUSB_DEVCTL_VBUS_SHIFT) - ) { - musb->int_usb |= MUSB_INTR_DISCONNECT; - musb->int_usb &= ~MUSB_INTR_SUSPEND; - break; - } - musb_g_resume(musb); - break; - case OTG_STATE_B_IDLE: - musb->int_usb &= ~MUSB_INTR_SUSPEND; - break; - default: - WARNING("bogus %s RESUME (%s)\n", - "peripheral", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } } /* see manual for the order of the tests */ if (int_usb & MUSB_INTR_SESSREQ) { - void __iomem *mbase = musb->mregs; - - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS - && (devctl & MUSB_DEVCTL_BDEVICE)) { - musb_dbg(musb, "SessReq while on B state"); + if (musb_handle_intr_sessreq(musb, devctl)) return IRQ_HANDLED; - } - - musb_dbg(musb, "SESSION_REQUEST (%s)", - usb_otg_state_string(musb->xceiv->otg->state)); - - /* IRQ arrives from ID pin sense or (later, if VBUS power - * is removed) SRP. responses are time critical: - * - turn on VBUS (with silicon-specific mechanism) - * - go through A_WAIT_VRISE - * - ... to A_WAIT_BCON. - * a_wait_vrise_tmout triggers VBUS_ERROR transitions - */ - musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); - musb->ep0_stage = MUSB_EP0_START; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - MUSB_HST_MODE(musb); - musb_platform_set_vbus(musb, 1); - handled = IRQ_HANDLED; } if (int_usb & MUSB_INTR_VBUSERROR) { - int ignore = 0; - - /* During connection as an A-Device, we may see a short - * current spikes causing voltage drop, because of cable - * and peripheral capacitance combined with vbus draw. - * (So: less common with truly self-powered devices, where - * vbus doesn't act like a power supply.) - * - * Such spikes are short; usually less than ~500 usec, max - * of ~2 msec. That is, they're not sustained overcurrent - * errors, though they're reported using VBUSERROR irqs. - * - * Workarounds: (a) hardware: use self powered devices. - * (b) software: ignore non-repeated VBUS errors. - * - * REVISIT: do delays from lots of DEBUG_KERNEL checks - * make trouble here, keeping VBUS < 4.4V ? - */ - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_HOST: - /* recovery is dicey once we've gotten past the - * initial stages of enumeration, but if VBUS - * stayed ok at the other end of the link, and - * another reset is due (at least for high speed, - * to redo the chirp etc), it might work OK... - */ - case OTG_STATE_A_WAIT_BCON: - case OTG_STATE_A_WAIT_VRISE: - if (musb->vbuserr_retry) { - void __iomem *mbase = musb->mregs; - - musb->vbuserr_retry--; - ignore = 1; - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(mbase, MUSB_DEVCTL, devctl); - } else { - musb->port1_status |= - USB_PORT_STAT_OVERCURRENT - | (USB_PORT_STAT_C_OVERCURRENT << 16); - } - break; - default: - break; - } - - dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, - "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", - usb_otg_state_string(musb->xceiv->otg->state), - devctl, - ({ char *s; - switch (devctl & MUSB_DEVCTL_VBUS) { - case 0 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<SessEnd"; break; - case 1 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<AValid"; break; - case 2 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<VBusValid"; break; - /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ - default: - s = "VALID"; break; - } s; }), - VBUSERR_RETRY_COUNT - musb->vbuserr_retry, - musb->port1_status); - - /* go through A_WAIT_VFALL then start a new session */ - if (!ignore) - musb_platform_set_vbus(musb, 0); + musb_handle_intr_vbuserr(musb, devctl); handled = IRQ_HANDLED; } if (int_usb & MUSB_INTR_SUSPEND) { - musb_dbg(musb, "SUSPEND (%s) devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), devctl); + musb_handle_intr_suspend(musb, devctl); handled = IRQ_HANDLED; - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_PERIPHERAL: - /* We also come here if the cable is removed, since - * this silicon doesn't report ID-no-longer-grounded. - * - * We depend on T(a_wait_bcon) to shut us down, and - * hope users don't do anything dicey during this - * undesired detour through A_WAIT_BCON. - */ - musb_hnp_stop(musb); - musb_host_resume_root_hub(musb); - musb_root_disconnect(musb); - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon - ? : OTG_TIME_A_WAIT_BCON)); - - break; - case OTG_STATE_B_IDLE: - if (!musb->is_active) - break; - case OTG_STATE_B_PERIPHERAL: - musb_g_suspend(musb); - musb->is_active = musb->g.b_hnp_enable; - if (musb->is_active) { - musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; - musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies( - OTG_TIME_B_ASE0_BRST)); - } - break; - case OTG_STATE_A_WAIT_BCON: - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_A_HOST: - musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; - musb->is_active = musb->hcd->self.b_hnp_enable; - break; - case OTG_STATE_B_HOST: - /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ - musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); - break; - default: - /* "should not happen" */ - musb->is_active = 0; - break; - } } if (int_usb & MUSB_INTR_CONNECT) { - struct usb_hcd *hcd = musb->hcd; - + musb_handle_intr_connect(musb, devctl, int_usb); handled = IRQ_HANDLED; - musb->is_active = 1; - - musb->ep0_stage = MUSB_EP0_START; - - musb->intrtxe = musb->epmask; - musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); - musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED - |USB_PORT_STAT_HIGH_SPEED - |USB_PORT_STAT_ENABLE - ); - musb->port1_status |= USB_PORT_STAT_CONNECTION - |(USB_PORT_STAT_C_CONNECTION << 16); - - /* high vs full speed is just a guess until after reset */ - if (devctl & MUSB_DEVCTL_LSDEV) - musb->port1_status |= USB_PORT_STAT_LOW_SPEED; - - /* indicate new connection to OTG machine */ - switch (musb->xceiv->otg->state) { - case OTG_STATE_B_PERIPHERAL: - if (int_usb & MUSB_INTR_SUSPEND) { - musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); - int_usb &= ~MUSB_INTR_SUSPEND; - goto b_host; - } else - musb_dbg(musb, "CONNECT as b_peripheral???"); - break; - case OTG_STATE_B_WAIT_ACON: - musb_dbg(musb, "HNP: CONNECT, now b_host"); -b_host: - musb->xceiv->otg->state = OTG_STATE_B_HOST; - if (musb->hcd) - musb->hcd->self.is_b_host = 1; - del_timer(&musb->otg_timer); - break; - default: - if ((devctl & MUSB_DEVCTL_VBUS) - == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { - musb->xceiv->otg->state = OTG_STATE_A_HOST; - if (hcd) - hcd->self.is_b_host = 0; - } - break; - } - - musb_host_poke_root_hub(musb); - - musb_dbg(musb, "CONNECT (%s) devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), devctl); } if (int_usb & MUSB_INTR_DISCONNECT) { - musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), - MUSB_MODE(musb), devctl); + musb_handle_intr_disconnect(musb, devctl); handled = IRQ_HANDLED; - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_HOST: - case OTG_STATE_A_SUSPEND: - musb_host_resume_root_hub(musb); - musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_B_HOST: - /* REVISIT this behaves for "real disconnect" - * cases; make sure the other transitions from - * from B_HOST act right too. The B_HOST code - * in hnp_stop() is currently not used... - */ - musb_root_disconnect(musb); - if (musb->hcd) - musb->hcd->self.is_b_host = 0; - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - MUSB_DEV_MODE(musb); - musb_g_disconnect(musb); - break; - case OTG_STATE_A_PERIPHERAL: - musb_hnp_stop(musb); - musb_root_disconnect(musb); - /* FALLTHROUGH */ - case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_IDLE: - musb_g_disconnect(musb); - break; - default: - WARNING("unhandled DISCONNECT transition (%s)\n", - usb_otg_state_string(musb->xceiv->otg->state)); - break; - } } - /* mentor saves a bit: bus reset and babble share the same irq. - * only host sees babble; only peripheral sees bus reset. - */ if (int_usb & MUSB_INTR_RESET) { + musb_handle_intr_reset(musb); handled = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { - /* - * When BABBLE happens what we can depends on which - * platform MUSB is running, because some platforms - * implemented proprietary means for 'recovering' from - * Babble conditions. One such platform is AM335x. In - * most cases, however, the only thing we can do is - * drop the session. - */ - dev_err(musb->controller, "Babble\n"); - - if (is_host_active(musb)) - musb_recover_from_babble(musb); - } else { - musb_dbg(musb, "BUS RESET as %s", - usb_otg_state_string(musb->xceiv->otg->state)); - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - musb_g_reset(musb); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ - /* never use invalid T(a_wait_bcon) */ - musb_dbg(musb, "HNP: in %s, %d msec timeout", - usb_otg_state_string(musb->xceiv->otg->state), - TA_WAIT_BCON(musb)); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies(TA_WAIT_BCON(musb))); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer(&musb->otg_timer); - musb_g_reset(musb); - break; - case OTG_STATE_B_WAIT_ACON: - musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", - usb_otg_state_string(musb->xceiv->otg->state)); - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - musb_g_reset(musb); - break; - case OTG_STATE_B_IDLE: - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - /* FALLTHROUGH */ - case OTG_STATE_B_PERIPHERAL: - musb_g_reset(musb); - break; - default: - musb_dbg(musb, "Unhandled BUS RESET as %s", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } } #if 0 @@ -1012,7 +1151,6 @@ b_host: static void musb_disable_interrupts(struct musb *musb) { void __iomem *mbase = musb->mregs; - u16 temp; /* disable interrupts */ musb_writeb(mbase, MUSB_INTRUSBE, 0); @@ -1022,9 +1160,9 @@ static void musb_disable_interrupts(struct musb *musb) musb_writew(mbase, MUSB_INTRRXE, 0); /* flush pending interrupts */ - temp = musb_readb(mbase, MUSB_INTRUSB); - temp = musb_readw(mbase, MUSB_INTRTX); - temp = musb_readw(mbase, MUSB_INTRRX); + musb_clearb(mbase, MUSB_INTRUSB); + musb_clearw(mbase, MUSB_INTRTX); + musb_clearw(mbase, MUSB_INTRRX); } static void musb_enable_interrupts(struct musb *musb) @@ -1073,9 +1211,9 @@ void musb_start(struct musb *musb) * (b) vbus present/connect IRQ, peripheral mode; * (c) peripheral initiates, using SRP */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && - musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && - (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { + if (musb->port_mode != MUSB_HOST && + musb_get_state(musb) != OTG_STATE_A_WAIT_BCON && + (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { musb->is_active = 1; } else { devctl |= MUSB_DEVCTL_SESSION; @@ -1133,7 +1271,7 @@ MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); */ /* mode 0 - fits in 2KB */ -static struct musb_fifo_cfg mode_0_cfg[] = { +static const struct musb_fifo_cfg mode_0_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, }, @@ -1142,7 +1280,7 @@ static struct musb_fifo_cfg mode_0_cfg[] = { }; /* mode 1 - fits in 4KB */ -static struct musb_fifo_cfg mode_1_cfg[] = { +static const struct musb_fifo_cfg mode_1_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, }, @@ -1151,17 +1289,17 @@ static struct musb_fifo_cfg mode_1_cfg[] = { }; /* mode 2 - fits in 4KB */ -static struct musb_fifo_cfg mode_2_cfg[] = { +static const struct musb_fifo_cfg mode_2_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, -{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, -{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, +{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 960, }, +{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 1024, }, }; /* mode 3 - fits in 4KB */ -static struct musb_fifo_cfg mode_3_cfg[] = { +static const struct musb_fifo_cfg mode_3_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1171,7 +1309,7 @@ static struct musb_fifo_cfg mode_3_cfg[] = { }; /* mode 4 - fits in 16KB */ -static struct musb_fifo_cfg mode_4_cfg[] = { +static const struct musb_fifo_cfg mode_4_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1202,7 +1340,7 @@ static struct musb_fifo_cfg mode_4_cfg[] = { }; /* mode 5 - fits in 8KB */ -static struct musb_fifo_cfg mode_5_cfg[] = { +static const struct musb_fifo_cfg mode_5_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1250,7 +1388,7 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, /* expect hw_ep has already been zero-initialized */ - size = ffs(max(maxpacket, (u16) 8)) - 1; + size = ffs(max_t(u16, maxpacket, 8)) - 1; maxpacket = 1 << size; c_size = size - 3; @@ -1275,25 +1413,25 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, /* REVISIT error check: be sure ep0 can both rx and tx ... */ switch (cfg->style) { case FIFO_TX: - musb_write_txfifosz(mbase, c_size); - musb_write_txfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_tx = maxpacket; break; case FIFO_RX: - musb_write_rxfifosz(mbase, c_size); - musb_write_rxfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_rx = maxpacket; break; case FIFO_RXTX: - musb_write_txfifosz(mbase, c_size); - musb_write_txfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_rx = maxpacket; - musb_write_rxfifosz(mbase, c_size); - musb_write_rxfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); hw_ep->tx_double_buffered = hw_ep->rx_double_buffered; hw_ep->max_packet_sz_tx = maxpacket; @@ -1309,7 +1447,7 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0)); } -static struct musb_fifo_cfg ep0_cfg = { +static const struct musb_fifo_cfg ep0_cfg = { .style = FIFO_RXTX, .maxpacket = 64, }; @@ -1329,7 +1467,7 @@ static int ep_config_from_table(struct musb *musb) switch (fifo_mode) { default: fifo_mode = 0; - /* FALLTHROUGH */ + fallthrough; case 0: cfg = mode_0_cfg; n = ARRAY_SIZE(mode_0_cfg); @@ -1494,14 +1632,15 @@ static int musb_core_init(u16 musb_type, struct musb *musb) } else { musb->is_multipoint = 0; type = ""; -#ifndef CONFIG_USB_OTG_BLACKLIST_HUB - pr_err("%s: kernel must blacklist external hubs\n", - musb_driver_name); -#endif + if (IS_ENABLED(CONFIG_USB) && + !IS_ENABLED(CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB)) { + pr_err("%s: kernel must disable external hubs, please fix the configuration\n", + musb_driver_name); + } } /* log release info */ - musb->hwvers = musb_read_hwvers(mbase); + musb->hwvers = musb_readw(mbase, MUSB_HWVERS); pr_debug("%s: %sHDRC RTL version %d.%d%s\n", musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers), MUSB_HWVERS_MINOR(musb->hwvers), @@ -1528,7 +1667,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb) hw_ep->fifo = musb->io.fifo_offset(i) + mbase; #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) - if (musb->io.quirks & MUSB_IN_TUSB) { + if (musb->ops->quirks & MUSB_IN_TUSB) { hw_ep->fifo_async = musb->async + 0x400 + musb->io.fifo_offset(i); hw_ep->fifo_sync = musb->sync + 0x400 + @@ -1652,7 +1791,7 @@ irqreturn_t musb_interrupt(struct musb *musb) EXPORT_SYMBOL_GPL(musb_interrupt); #ifndef CONFIG_MUSB_PIO_ONLY -static bool use_dma = 1; +static bool use_dma = true; /* "modprobe ... use_dma=0" etc */ module_param(use_dma, bool, 0644); @@ -1713,21 +1852,21 @@ EXPORT_SYMBOL_GPL(musb_mailbox); /*-------------------------------------------------------------------------*/ static ssize_t -musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf) +mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct musb *musb = dev_to_musb(dev); unsigned long flags; - int ret = -EINVAL; + int ret; spin_lock_irqsave(&musb->lock, flags); - ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state)); + ret = sprintf(buf, "%s\n", musb_otg_state_string(musb)); spin_unlock_irqrestore(&musb->lock, flags); return ret; } static ssize_t -musb_mode_store(struct device *dev, struct device_attribute *attr, +mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { struct musb *musb = dev_to_musb(dev); @@ -1747,10 +1886,10 @@ musb_mode_store(struct device *dev, struct device_attribute *attr, return (status == 0) ? n : status; } -static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store); +static DEVICE_ATTR_RW(mode); static ssize_t -musb_vbus_store(struct device *dev, struct device_attribute *attr, +vbus_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { struct musb *musb = dev_to_musb(dev); @@ -1765,7 +1904,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, spin_lock_irqsave(&musb->lock, flags); /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */ musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ; - if (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) + if (musb_get_state(musb) == OTG_STATE_A_WAIT_BCON) musb->is_active = 0; musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); spin_unlock_irqrestore(&musb->lock, flags); @@ -1774,7 +1913,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, } static ssize_t -musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) +vbus_show(struct device *dev, struct device_attribute *attr, char *buf) { struct musb *musb = dev_to_musb(dev); unsigned long flags; @@ -1782,6 +1921,7 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) int vbus; u8 devctl; + pm_runtime_get_sync(dev); spin_lock_irqsave(&musb->lock, flags); val = musb->a_wait_bcon; vbus = musb_platform_get_vbus_status(musb); @@ -1795,17 +1935,17 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) vbus = 0; } spin_unlock_irqrestore(&musb->lock, flags); + pm_runtime_put_sync(dev); return sprintf(buf, "Vbus %s, timeout %lu msec\n", - vbus ? "on" : "off", val); + str_on_off(vbus), val); } -static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store); +static DEVICE_ATTR_RW(vbus); /* Gadget drivers can't know that a host is connected so they might want * to start SRP, but users can. This allows userspace to trigger SRP. */ -static ssize_t -musb_srp_store(struct device *dev, struct device_attribute *attr, +static ssize_t srp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { struct musb *musb = dev_to_musb(dev); @@ -1822,25 +1962,40 @@ musb_srp_store(struct device *dev, struct device_attribute *attr, return n; } -static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store); +static DEVICE_ATTR_WO(srp); -static struct attribute *musb_attributes[] = { +static struct attribute *musb_attrs[] = { &dev_attr_mode.attr, &dev_attr_vbus.attr, &dev_attr_srp.attr, NULL }; - -static const struct attribute_group musb_attr_group = { - .attrs = musb_attributes, -}; +ATTRIBUTE_GROUPS(musb); #define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \ (2 << MUSB_DEVCTL_VBUS_SHIFT) | \ MUSB_DEVCTL_SESSION) +#define MUSB_QUIRK_B_DISCONNECT_99 (MUSB_DEVCTL_BDEVICE | \ + (3 << MUSB_DEVCTL_VBUS_SHIFT) | \ + MUSB_DEVCTL_SESSION) #define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \ MUSB_DEVCTL_SESSION) +static bool musb_state_needs_recheck(struct musb *musb, u8 devctl, + const char *desc) +{ + if (musb->quirk_retries && !musb->flush_irq_work) { + trace_musb_state(musb, devctl, desc); + schedule_delayed_work(&musb->irq_work, + msecs_to_jiffies(1000)); + musb->quirk_retries--; + + return true; + } + + return false; +} + /* * Check the musb devctl session bit to determine if we want to * allow PM runtime for the device. In general, we want to keep things @@ -1860,29 +2015,22 @@ static void musb_pm_runtime_check_session(struct musb *musb) s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV | MUSB_DEVCTL_HR; switch (devctl & ~s) { + case MUSB_QUIRK_B_DISCONNECT_99: + musb_state_needs_recheck(musb, devctl, + "Poll devctl in case of suspend after disconnect"); + break; case MUSB_QUIRK_B_INVALID_VBUS_91: - if (musb->quirk_retries--) { - musb_dbg(musb, - "Poll devctl on invalid vbus, assume no session"); - schedule_delayed_work(&musb->irq_work, - msecs_to_jiffies(1000)); - + if (musb_state_needs_recheck(musb, devctl, + "Poll devctl on invalid vbus, assume no session")) return; - } - /* fall through */ + fallthrough; case MUSB_QUIRK_A_DISCONNECT_19: - if (musb->quirk_retries--) { - musb_dbg(musb, - "Poll devctl on possible host mode disconnect"); - schedule_delayed_work(&musb->irq_work, - msecs_to_jiffies(1000)); - + if (musb_state_needs_recheck(musb, devctl, + "Poll devctl on possible host mode disconnect")) return; - } if (!musb->session) break; - musb_dbg(musb, "Allow PM on possible host mode disconnect"); - pm_runtime_mark_last_busy(musb->controller); + trace_musb_state(musb, devctl, "Allow PM on possible host mode disconnect"); pm_runtime_put_autosuspend(musb->controller); musb->session = false; return; @@ -1897,15 +2045,23 @@ static void musb_pm_runtime_check_session(struct musb *musb) /* Block PM or allow PM? */ if (s) { - musb_dbg(musb, "Block PM on active session: %02x", devctl); + trace_musb_state(musb, devctl, "Block PM on active session"); error = pm_runtime_get_sync(musb->controller); if (error < 0) dev_err(musb->controller, "Could not enable: %i\n", error); musb->quirk_retries = 3; + + /* + * We can get a spurious MUSB_INTR_SESSREQ interrupt on start-up + * in B-peripheral mode with nothing connected and the session + * bit clears silently. Check status again in 3 seconds. + */ + if (devctl & MUSB_DEVCTL_BDEVICE) + schedule_delayed_work(&musb->irq_work, + msecs_to_jiffies(3000)); } else { - musb_dbg(musb, "Allow PM with no session: %02x", devctl); - pm_runtime_mark_last_busy(musb->controller); + trace_musb_state(musb, devctl, "Allow PM with no session"); pm_runtime_put_autosuspend(musb->controller); } @@ -1918,7 +2074,7 @@ static void musb_irq_work(struct work_struct *data) struct musb *musb = container_of(data, struct musb, irq_work.work); int error; - error = pm_runtime_get_sync(musb->controller); + error = pm_runtime_resume_and_get(musb->controller); if (error < 0) { dev_err(musb->controller, "Could not enable: %i\n", error); @@ -1927,12 +2083,11 @@ static void musb_irq_work(struct work_struct *data) musb_pm_runtime_check_session(musb); - if (musb->xceiv->otg->state != musb->xceiv_old_state) { - musb->xceiv_old_state = musb->xceiv->otg->state; + if (musb_get_state(musb) != musb->xceiv_old_state) { + musb->xceiv_old_state = musb_get_state(musb); sysfs_notify(&musb->controller->kobj, NULL, "mode"); } - pm_runtime_mark_last_busy(musb->controller); pm_runtime_put_autosuspend(musb->controller); } @@ -2033,10 +2188,6 @@ static void musb_free(struct musb *musb) * cleanup after everything's been de-activated. */ -#ifdef CONFIG_SYSFS - sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); -#endif - if (musb->nIrq >= 0) { if (musb->irq_wake) disable_irq_wake(musb->nIrq); @@ -2096,32 +2247,35 @@ int musb_queue_resume_work(struct musb *musb, { struct musb_pending_work *w; unsigned long flags; + bool is_suspended; int error; if (WARN_ON(!callback)) return -EINVAL; - if (pm_runtime_active(musb->controller)) - return callback(musb, data); + spin_lock_irqsave(&musb->list_lock, flags); + is_suspended = musb->is_runtime_suspended; - w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC); - if (!w) - return -ENOMEM; + if (is_suspended) { + w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC); + if (!w) { + error = -ENOMEM; + goto out_unlock; + } + + w->callback = callback; + w->data = data; - w->callback = callback; - w->data = data; - spin_lock_irqsave(&musb->list_lock, flags); - if (musb->is_runtime_suspended) { list_add_tail(&w->node, &musb->pending_list); error = 0; - } else { - dev_err(musb->controller, "could not add resume work %p\n", - callback); - devm_kfree(musb->controller, w); - error = -EINPROGRESS; } + +out_unlock: spin_unlock_irqrestore(&musb->list_lock, flags); + if (!is_suspended) + error = callback(musb, data); + return error; } EXPORT_SYMBOL_GPL(musb_queue_resume_work); @@ -2174,7 +2328,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) spin_lock_init(&musb->lock); spin_lock_init(&musb->list_lock); - musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops; musb->port_mode = plat->mode; @@ -2188,8 +2341,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_writeb = musb_default_writeb; musb_readw = musb_default_readw; musb_writew = musb_default_writew; - musb_readl = musb_default_readl; - musb_writel = musb_default_writel; /* The musb_platform_init() call: * - adjusts musb->mregs @@ -2198,7 +2349,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) * - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS * - * There are various transceiver configurations. Blackfin, + * There are various transceiver configurations. * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses * external/discrete ones in various flavors (twl4030 family, * isp1504, non-OTG, etc) mostly hooking up through ULPI. @@ -2212,11 +2363,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail2; } - if (musb->ops->quirks) - musb->io.quirks = musb->ops->quirks; /* Most devices use indexed offset or flat offset */ - if (musb->io.quirks & MUSB_INDEXED_EP) { + if (musb->ops->quirks & MUSB_INDEXED_EP) { musb->io.ep_offset = musb_indexed_ep_offset; musb->io.ep_select = musb_indexed_ep_select; } else { @@ -2224,7 +2373,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_select = musb_flat_ep_select; } - if (musb->io.quirks & MUSB_G_NO_SKB_RESERVE) + if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE) musb->g.quirk_avoids_skb_reserve = 1; /* At least tusb6010 has its own offsets */ @@ -2252,14 +2401,19 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readb = musb->ops->readb; if (musb->ops->writeb) musb_writeb = musb->ops->writeb; + if (musb->ops->clearb) + musb_clearb = musb->ops->clearb; + else + musb_clearb = musb_readb; + if (musb->ops->readw) musb_readw = musb->ops->readw; if (musb->ops->writew) musb_writew = musb->ops->writew; - if (musb->ops->readl) - musb_readl = musb->ops->readl; - if (musb->ops->writel) - musb_writel = musb->ops->writel; + if (musb->ops->clearw) + musb_clearw = musb->ops->clearw; + else + musb_clearw = musb_readw; #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { @@ -2281,7 +2435,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) else musb->io.write_fifo = musb_default_write_fifo; - if (!musb->xceiv->io_ops) { + if (musb->ops->get_toggle) + musb->io.get_toggle = musb->ops->get_toggle; + else + musb->io.get_toggle = musb_default_get_toggle; + + if (musb->ops->set_toggle) + musb->io.set_toggle = musb->ops->set_toggle; + else + musb->io.set_toggle = musb_default_set_toggle; + + if (IS_ENABLED(CONFIG_USB_PHY) && musb->xceiv && !musb->xceiv->io_ops) { musb->xceiv->io_dev = musb->controller; musb->xceiv->io_priv = musb->mregs; musb->xceiv->io_ops = &musb_ulpi_access; @@ -2320,6 +2484,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_disable_interrupts(musb); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + /* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */ + musb_writeb(musb->mregs, MUSB_POWER, 0); + /* Init IRQ workqueue before request_irq */ INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work); INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset); @@ -2332,7 +2499,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail3; - setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); + timer_setup(&musb->otg_timer, musb_otg_timer_func, 0); /* attach to the IRQ */ if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) { @@ -2351,33 +2518,28 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* program PHY to use external vBus if required */ if (plat->extvbus) { - u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); + u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_write_ulpi_buscontrol(musb->mregs, busctl); + musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); } - if (musb->xceiv->otg->default_a) { - MUSB_HST_MODE(musb); - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - } else { - MUSB_DEV_MODE(musb); - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - } + MUSB_DEV_MODE(musb); + musb_set_state(musb, OTG_STATE_B_IDLE); switch (musb->port_mode) { - case MUSB_PORT_MODE_HOST: + case MUSB_HOST: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_platform_set_mode(musb, MUSB_HOST); break; - case MUSB_PORT_MODE_GADGET: + case MUSB_PERIPHERAL: status = musb_gadget_setup(musb); if (status < 0) goto fail3; status = musb_platform_set_mode(musb, MUSB_PERIPHERAL); break; - case MUSB_PORT_MODE_DUAL_ROLE: + case MUSB_OTG: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; @@ -2396,27 +2558,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail3; - status = musb_init_debugfs(musb); - if (status < 0) - goto fail4; - - status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); - if (status) - goto fail5; + musb_init_debugfs(musb); musb->is_initialized = 1; - pm_runtime_mark_last_busy(musb->controller); pm_runtime_put_autosuspend(musb->controller); return 0; -fail5: - musb_exit_debugfs(musb); - -fail4: - musb_gadget_cleanup(musb); - musb_host_cleanup(musb); - fail3: cancel_delayed_work_sync(&musb->irq_work); cancel_delayed_work_sync(&musb->finish_resume_work); @@ -2438,9 +2586,7 @@ fail2: musb_platform_exit(musb); fail1: - if (status != -EPROBE_DEFER) - dev_err(musb->controller, - "%s failed with status %d\n", __func__, status); + dev_err_probe(musb->controller, status, "%s failed\n", __func__); musb_free(musb); @@ -2459,21 +2605,19 @@ static int musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int irq = platform_get_irq_byname(pdev, "mc"); - struct resource *iomem; void __iomem *base; - if (irq <= 0) - return -ENODEV; + if (irq < 0) + return irq; - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, iomem); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); return musb_init_controller(dev, irq, base); } -static int musb_remove(struct platform_device *pdev) +static void musb_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct musb *musb = dev_to_musb(dev); @@ -2498,18 +2642,17 @@ static int musb_remove(struct platform_device *pdev) musb_disable_interrupts(musb); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); spin_unlock_irqrestore(&musb->lock, flags); + musb_platform_exit(musb); pm_runtime_dont_use_autosuspend(musb->controller); pm_runtime_put_sync(musb->controller); pm_runtime_disable(musb->controller); - musb_platform_exit(musb); musb_phy_callback = NULL; if (musb->dma_controller) musb_dma_controller_destroy(musb->dma_controller); usb_phy_shutdown(musb->xceiv); musb_free(musb); device_init_wakeup(dev, 0); - return 0; } #ifdef CONFIG_PM @@ -2522,20 +2665,14 @@ static void musb_save_context(struct musb *musb) musb->context.frame = musb_readw(musb_base, MUSB_FRAME); musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); - musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); + musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL); musb->context.power = musb_readb(musb_base, MUSB_POWER); musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); musb->context.index = musb_readb(musb_base, MUSB_INDEX); musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL); for (i = 0; i < musb->config->num_eps; ++i) { - struct musb_hw_ep *hw_ep; - - hw_ep = &musb->endpoints[i]; - if (!hw_ep) - continue; - - epio = hw_ep->regs; + epio = musb->endpoints[i].regs; if (!epio) continue; @@ -2551,13 +2688,13 @@ static void musb_save_context(struct musb *musb) if (musb->dyn_fifo) { musb->context.index_regs[i].txfifoadd = - musb_read_txfifoadd(musb_base); + musb_readw(musb_base, MUSB_TXFIFOADD); musb->context.index_regs[i].rxfifoadd = - musb_read_rxfifoadd(musb_base); + musb_readw(musb_base, MUSB_RXFIFOADD); musb->context.index_regs[i].txfifosz = - musb_read_txfifosz(musb_base); + musb_readb(musb_base, MUSB_TXFIFOSZ); musb->context.index_regs[i].rxfifosz = - musb_read_rxfifosz(musb_base); + musb_readb(musb_base, MUSB_RXFIFOSZ); } musb->context.index_regs[i].txtype = @@ -2594,7 +2731,7 @@ static void musb_restore_context(struct musb *musb) musb_writew(musb_base, MUSB_FRAME, musb->context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); - musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); + musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl); /* Don't affect SUSPENDM/RESUME bits in POWER reg */ power = musb_readb(musb_base, MUSB_POWER); @@ -2610,13 +2747,7 @@ static void musb_restore_context(struct musb *musb) musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); for (i = 0; i < musb->config->num_eps; ++i) { - struct musb_hw_ep *hw_ep; - - hw_ep = &musb->endpoints[i]; - if (!hw_ep) - continue; - - epio = hw_ep->regs; + epio = musb->endpoints[i].regs; if (!epio) continue; @@ -2631,13 +2762,13 @@ static void musb_restore_context(struct musb *musb) musb->context.index_regs[i].rxcsr); if (musb->dyn_fifo) { - musb_write_txfifosz(musb_base, + musb_writeb(musb_base, MUSB_TXFIFOSZ, musb->context.index_regs[i].txfifosz); - musb_write_rxfifosz(musb_base, + musb_writeb(musb_base, MUSB_RXFIFOSZ, musb->context.index_regs[i].rxfifosz); - musb_write_txfifoadd(musb_base, + musb_writew(musb_base, MUSB_TXFIFOADD, musb->context.index_regs[i].txfifoadd); - musb_write_rxfifoadd(musb_base, + musb_writew(musb_base, MUSB_RXFIFOADD, musb->context.index_regs[i].rxfifoadd); } @@ -2671,11 +2802,25 @@ static int musb_suspend(struct device *dev) { struct musb *musb = dev_to_musb(dev); unsigned long flags; + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } musb_platform_disable(musb); musb_disable_interrupts(musb); - if (!(musb->io.quirks & MUSB_PRESERVE_SESSION)) + + musb->flush_irq_work = true; + while (flush_delayed_work(&musb->irq_work)) + ; + musb->flush_irq_work = false; + + if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION)) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + WARN_ON(!list_empty(&musb->pending_list)); spin_lock_irqsave(&musb->lock, flags); @@ -2721,15 +2866,15 @@ static int musb_resume(struct device *dev) if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status = 0; - /* - * The USB HUB code expects the device to be in RPM_ACTIVE once it came - * out of suspend - */ - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); + musb_enable_interrupts(musb); + musb_platform_enable(musb); - musb_start(musb); + /* session might be disabled in suspend */ + if (musb->port_mode == MUSB_HOST && + !(musb->ops->quirks & MUSB_PRESERVE_SESSION)) { + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + } spin_lock_irqsave(&musb->lock, flags); error = musb_run_resume_work(musb); @@ -2738,6 +2883,8 @@ static int musb_resume(struct device *dev) error); spin_unlock_irqrestore(&musb->lock, flags); + pm_runtime_put_autosuspend(dev); + return 0; } @@ -2796,9 +2943,10 @@ static const struct dev_pm_ops musb_dev_pm_ops = { static struct platform_driver musb_driver = { .driver = { - .name = (char *)musb_driver_name, + .name = musb_driver_name, .bus = &platform_bus_type, .pm = MUSB_DEV_PM_OPS, + .dev_groups = musb_groups, }, .probe = musb_probe, .remove = musb_remove, |