diff options
Diffstat (limited to 'drivers/usb/phy/phy-mxs-usb.c')
| -rw-r--r-- | drivers/usb/phy/phy-mxs-usb.c | 134 |
1 files changed, 120 insertions, 14 deletions
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 920a32cd094d..7490f1798b46 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -18,6 +18,7 @@ #include <linux/regmap.h> #include <linux/mfd/syscon.h> #include <linux/iopoll.h> +#include <linux/regulator/consumer.h> #define DRIVER_NAME "mxs_phy" @@ -70,6 +71,9 @@ #define BM_USBPHY_PLL_EN_USB_CLKS BIT(6) /* Anatop Registers */ +#define ANADIG_REG_1P1_SET 0x114 +#define ANADIG_REG_1P1_CLR 0x118 + #define ANADIG_ANA_MISC0 0x150 #define ANADIG_ANA_MISC0_SET 0x154 #define ANADIG_ANA_MISC0_CLR 0x158 @@ -117,6 +121,14 @@ #define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29) #define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28) +/* System Integration Module (SIM) Registers */ +#define SIM_GPR1 0x30 + +#define USB_PHY_VLLS_WAKEUP_EN BIT(0) + +#define BM_ANADIG_REG_1P1_ENABLE_WEAK_LINREG BIT(18) +#define BM_ANADIG_REG_1P1_TRACK_VDD_SOC_CAP BIT(19) + #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) /* Do disconnection between PHY and controller without vbus */ @@ -149,6 +161,15 @@ #define MXS_PHY_TX_D_CAL_MIN 79 #define MXS_PHY_TX_D_CAL_MAX 119 +/* + * At imx6q/6sl/6sx, the PHY2's clock is controlled by hardware directly, + * eg, according to PHY's suspend status. In these PHYs, we only need to + * open the clock at the initialization and close it at its shutdown routine. + * These PHYs can send resume signal without software interfere if not + * gate clock. + */ +#define MXS_PHY_HARDWARE_CONTROL_PHY2_CLK BIT(4) + struct mxs_phy_data { unsigned int flags; }; @@ -160,12 +181,14 @@ static const struct mxs_phy_data imx23_phy_data = { static const struct mxs_phy_data imx6q_phy_data = { .flags = MXS_PHY_SENDING_SOF_TOO_FAST | MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | - MXS_PHY_NEED_IP_FIX, + MXS_PHY_NEED_IP_FIX | + MXS_PHY_HARDWARE_CONTROL_PHY2_CLK, }; static const struct mxs_phy_data imx6sl_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | - MXS_PHY_NEED_IP_FIX, + MXS_PHY_NEED_IP_FIX | + MXS_PHY_HARDWARE_CONTROL_PHY2_CLK, }; static const struct mxs_phy_data vf610_phy_data = { @@ -174,11 +197,13 @@ static const struct mxs_phy_data vf610_phy_data = { }; static const struct mxs_phy_data imx6sx_phy_data = { - .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | + MXS_PHY_HARDWARE_CONTROL_PHY2_CLK, }; static const struct mxs_phy_data imx6ul_phy_data = { - .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | + MXS_PHY_HARDWARE_CONTROL_PHY2_CLK, }; static const struct mxs_phy_data imx7ulp_phy_data = { @@ -201,9 +226,11 @@ struct mxs_phy { struct clk *clk; const struct mxs_phy_data *data; struct regmap *regmap_anatop; + struct regmap *regmap_sim; int port_id; u32 tx_reg_set; u32 tx_reg_mask; + struct regulator *phy_3p0; }; static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) @@ -221,6 +248,11 @@ static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy) return mxs_phy->data == &imx7ulp_phy_data; } +static inline bool is_imx6ul_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx6ul_phy_data; +} + /* * PHY needs some 32K cycles to switch from 32K clock to * bus (such as AHB/AXI, etc) clock. @@ -288,6 +320,16 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) if (ret) goto disable_pll; + if (mxs_phy->phy_3p0) { + ret = regulator_enable(mxs_phy->phy_3p0); + if (ret) { + dev_err(mxs_phy->phy.dev, + "Failed to enable 3p0 regulator, ret=%d\n", + ret); + return ret; + } + } + /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); @@ -448,6 +490,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy) if (is_imx7ulp_phy(mxs_phy)) mxs_phy_pll_enable(phy->io_priv, false); + if (mxs_phy->phy_3p0) + regulator_disable(mxs_phy->phy_3p0); + clk_disable_unprepare(mxs_phy->clk); } @@ -503,12 +548,19 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) } writel(BM_USBPHY_CTRL_CLKGATE, x->io_priv + HW_USBPHY_CTRL_SET); - clk_disable_unprepare(mxs_phy->clk); + if (!(mxs_phy->port_id == 1 && + (mxs_phy->data->flags & + MXS_PHY_HARDWARE_CONTROL_PHY2_CLK))) + clk_disable_unprepare(mxs_phy->clk); } else { mxs_phy_clock_switch_delay(); - ret = clk_prepare_enable(mxs_phy->clk); - if (ret) - return ret; + if (!(mxs_phy->port_id == 1 && + (mxs_phy->data->flags & + MXS_PHY_HARDWARE_CONTROL_PHY2_CLK))) { + ret = clk_prepare_enable(mxs_phy->clk); + if (ret) + return ret; + } writel(BM_USBPHY_CTRL_CLKGATE, x->io_priv + HW_USBPHY_CTRL_CLR); writel(0, x->io_priv + HW_USBPHY_PWD); @@ -738,6 +790,17 @@ static int mxs_phy_probe(struct platform_device *pdev) } } + /* Currently, only imx7ulp has SIM module */ + if (of_get_property(np, "nxp,sim", NULL)) { + mxs_phy->regmap_sim = syscon_regmap_lookup_by_phandle + (np, "nxp,sim"); + if (IS_ERR(mxs_phy->regmap_sim)) { + dev_dbg(&pdev->dev, + "failed to find regmap for sim\n"); + return PTR_ERR(mxs_phy->regmap_sim); + } + } + /* Precompute which bits of the TX register are to be updated, if any */ if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) && val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { @@ -789,6 +852,17 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->clk = clk; mxs_phy->data = of_device_get_match_data(&pdev->dev); + mxs_phy->phy_3p0 = devm_regulator_get(&pdev->dev, "phy-3p0"); + if (PTR_ERR(mxs_phy->phy_3p0) == -ENODEV) + /* not exist */ + mxs_phy->phy_3p0 = NULL; + else if (IS_ERR(mxs_phy->phy_3p0)) + return dev_err_probe(&pdev->dev, PTR_ERR(mxs_phy->phy_3p0), + "Getting regulator error\n"); + + if (mxs_phy->phy_3p0) + regulator_set_voltage(mxs_phy->phy_3p0, 3200000, 3200000); + platform_set_drvdata(pdev, mxs_phy); device_set_wakeup_capable(&pdev->dev, true); @@ -804,28 +878,58 @@ static void mxs_phy_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP +static void mxs_phy_wakeup_enable(struct mxs_phy *mxs_phy, bool on) +{ + u32 mask = USB_PHY_VLLS_WAKEUP_EN; + + /* If the SoCs don't have SIM, quit */ + if (!mxs_phy->regmap_sim) + return; + + if (on) { + regmap_update_bits(mxs_phy->regmap_sim, SIM_GPR1, mask, mask); + udelay(500); + } else { + regmap_update_bits(mxs_phy->regmap_sim, SIM_GPR1, mask, 0); + } +} + static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on) { - unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; + unsigned int reg; + u32 value; /* If the SoCs don't have anatop, quit */ if (!mxs_phy->regmap_anatop) return; - if (is_imx6q_phy(mxs_phy)) + if (is_imx6q_phy(mxs_phy)) { + reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; regmap_write(mxs_phy->regmap_anatop, reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG); - else if (is_imx6sl_phy(mxs_phy)) + } else if (is_imx6sl_phy(mxs_phy)) { + reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; regmap_write(mxs_phy->regmap_anatop, reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL); + } else if (is_imx6ul_phy(mxs_phy)) { + reg = on ? ANADIG_REG_1P1_SET : ANADIG_REG_1P1_CLR; + value = BM_ANADIG_REG_1P1_ENABLE_WEAK_LINREG | + BM_ANADIG_REG_1P1_TRACK_VDD_SOC_CAP; + if (mxs_phy_get_vbus_status(mxs_phy) && on) + regmap_write(mxs_phy->regmap_anatop, reg, value); + else if (!on) + regmap_write(mxs_phy->regmap_anatop, reg, value); + } } static int mxs_phy_system_suspend(struct device *dev) { struct mxs_phy *mxs_phy = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (device_may_wakeup(dev)) { mxs_phy_enable_ldo_in_suspend(mxs_phy, true); + mxs_phy_wakeup_enable(mxs_phy, true); + } return 0; } @@ -834,8 +938,10 @@ static int mxs_phy_system_resume(struct device *dev) { struct mxs_phy *mxs_phy = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (device_may_wakeup(dev)) { mxs_phy_enable_ldo_in_suspend(mxs_phy, false); + mxs_phy_wakeup_enable(mxs_phy, false); + } return 0; } @@ -846,7 +952,7 @@ static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, - .remove_new = mxs_phy_remove, + .remove = mxs_phy_remove, .driver = { .name = DRIVER_NAME, .of_match_table = mxs_phy_dt_ids, |