diff options
Diffstat (limited to 'drivers/usb/serial/Kconfig')
| -rw-r--r-- | drivers/usb/serial/Kconfig | 119 |
1 files changed, 58 insertions, 61 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 533f127c30ad..ef8d1c73c754 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # USB Serial device configuration # @@ -5,12 +6,12 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" depends on TTY - ---help--- + help Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to your USB bus. - Please read <file:Documentation/usb/usb-serial.txt> for more + Please read <file:Documentation/usb/usb-serial.rst> for more information on the specifics of the different devices that are supported, and on how to use them. @@ -22,7 +23,7 @@ if USB_SERIAL config USB_SERIAL_CONSOLE bool "USB Serial Console device support" depends on USB_SERIAL=y - ---help--- + help If you say Y here, it will be possible to use a USB to serial converter port as the system console (the system console is the device which receives all kernel messages and warnings and which @@ -46,7 +47,7 @@ config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" help Say Y here if you want to use the generic USB serial driver. Please - read <file:Documentation/usb/usb-serial.txt> for more information on + read <file:Documentation/usb/usb-serial.rst> for more information on using this driver. It is recommended that the "USB Serial converter support" be compiled as a module for this driver to be used properly. @@ -65,6 +66,7 @@ config USB_SERIAL_SIMPLE - Libtransistor USB console - a number of Motorola phones - Motorola Tetra devices + - Nokia mobile phones - Novatel Wireless GPS receivers - Siemens USB/MPI adapter. - ViVOtech ViVOpay USB device. @@ -122,15 +124,12 @@ config USB_SERIAL_WHITEHEAT config USB_SERIAL_DIGI_ACCELEPORT tristate "USB Digi International AccelePort USB Serial Driver" - ---help--- + help Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 2 port (plus parallel port) and 4 port USB serial converters. The parallel port on the USB 2 appears as a third serial port on Linux. The Digi Acceleport USB 8 is not yet supported by this driver. - This driver works under SMP with the usb-uhci driver. It does not - work under SMP with the uhci driver. - To compile this driver as a module, choose M here: the module will be called digi_acceleport. @@ -162,7 +161,7 @@ config USB_SERIAL_EMPEG help Say Y here if you want to connect to your Empeg empeg-car Mark I/II mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} - device node. See <file:Documentation/usb/usb-serial.txt> for more + device node. See <file:Documentation/usb/usb-serial.rst> for more tidbits of information. To compile this driver as a module, choose M here: the @@ -170,7 +169,7 @@ config USB_SERIAL_EMPEG config USB_SERIAL_FTDI_SIO tristate "USB FTDI Single Port Serial Driver" - ---help--- + help Say Y here if you want to use a FTDI SIO single port USB to serial converter device. The implementation I have is called the USC-1000. This driver has also been tested with the 245 and 232 devices. @@ -198,7 +197,7 @@ config USB_SERIAL_IPAQ Say Y here if you want to connect to your Compaq iPAQ, HP Jornada or any other PDA running Windows CE 3.0 or PocketPC 2002 using a USB cradle/cable. For information on using the driver, - read <file:Documentation/usb/usb-serial.txt>. + read <file:Documentation/usb/usb-serial.rst>. To compile this driver as a module, choose M here: the module will be called ipaq. @@ -215,7 +214,7 @@ config USB_SERIAL_IR config USB_SERIAL_EDGEPORT tristate "USB Inside Out Edgeport Serial Driver" - ---help--- + help Say Y here if you want to use any of the following devices from Inside Out Networks (Digi): Edgeport/4 @@ -268,19 +267,19 @@ config USB_SERIAL_F8153X config USB_SERIAL_GARMIN - tristate "USB Garmin GPS driver" - help - Say Y here if you want to connect to your Garmin GPS. - Should work with most Garmin GPS devices which have a native USB port. + tristate "USB Garmin GPS driver" + help + Say Y here if you want to connect to your Garmin GPS. + Should work with most Garmin GPS devices which have a native USB port. - See <http://sourceforge.net/projects/garmin-gps> for the latest - version of the driver. + See <http://sourceforge.net/projects/garmin-gps> for the latest + version of the driver. - To compile this driver as a module, choose M here: the - module will be called garmin_gps. + To compile this driver as a module, choose M here: the + module will be called garmin_gps. config USB_SERIAL_IPW - tristate "USB IPWireless (3G UMTS TDD) Driver" + tristate "USB IPWireless (3G UMTS TDD) Driver" select USB_SERIAL_WWAN help Say Y here if you want to use a IPWireless USB modem such as @@ -300,12 +299,12 @@ config USB_SERIAL_IUU module will be called iuu_phoenix.o config USB_SERIAL_KEYSPAN_PDA - tristate "USB Keyspan PDA Single Port Serial Driver" + tristate "USB Keyspan PDA / Xircom Single Port Serial Driver" select USB_EZUSB_FX2 help - Say Y here if you want to use a Keyspan PDA single port USB to - serial converter device. This driver makes use of firmware - developed from scratch by Brian Warner. + Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single + port USB to serial converter device. This driver makes use of + firmware developed from scratch by Brian Warner. To compile this driver as a module, choose M here: the module will be called keyspan_pda. @@ -313,7 +312,7 @@ config USB_SERIAL_KEYSPAN_PDA config USB_SERIAL_KEYSPAN tristate "USB Keyspan USA-xxx Serial Driver" select USB_EZUSB_FX2 - ---help--- + help Say Y here if you want to use Keyspan USB to serial converter devices. This driver makes use of Keyspan's official firmware and was developed with their support. You must also include @@ -326,39 +325,39 @@ config USB_SERIAL_KEYSPAN config USB_SERIAL_KLSI tristate "USB KL5KUSB105 (Palmconnect) Driver" - ---help--- + help Say Y here if you want to use a KL5KUSB105 - based single port serial adapter. The most widely known -- and currently the only tested -- device in this category is the PalmConnect USB Serial adapter sold by Palm Inc. for use with their Palm III and Palm V series PDAs. - Please read <file:Documentation/usb/usb-serial.txt> for more + Please read <file:Documentation/usb/usb-serial.rst> for more information. To compile this driver as a module, choose M here: the module will be called kl5kusb105. config USB_SERIAL_KOBIL_SCT - tristate "USB KOBIL chipcard reader" - ---help--- - Say Y here if you want to use one of the following KOBIL USB chipcard - readers: - - - USB TWIN - - KAAN Standard Plus - - KAAN SIM - - SecOVID Reader Plus - - B1 Professional - - KAAN Professional - - Note that you need a current CT-API. - To compile this driver as a module, choose M here: the + tristate "USB KOBIL chipcard reader" + help + Say Y here if you want to use one of the following KOBIL USB chipcard + readers: + + - USB TWIN + - KAAN Standard Plus + - KAAN SIM + - SecOVID Reader Plus + - B1 Professional + - KAAN Professional + + Note that you need a current CT-API. + To compile this driver as a module, choose M here: the module will be called kobil_sct. config USB_SERIAL_MCT_U232 tristate "USB MCT Single Port Serial Driver" - ---help--- + help Say Y here if you want to use a USB Serial single port adapter from Magic Control Technology Corp. (U232 is one of the model numbers). @@ -370,7 +369,7 @@ config USB_SERIAL_MCT_U232 config USB_SERIAL_METRO tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" - ---help--- + help Say Y here if you want to use a USB POS Metrologic barcode scanner. To compile this driver as a module, choose M here: the @@ -378,7 +377,7 @@ config USB_SERIAL_METRO config USB_SERIAL_MOS7720 tristate "USB Moschip 7720 Serial Driver" - ---help--- + help Say Y here if you want to use USB Serial single and double port adapters from Moschip Semiconductor Tech. @@ -390,14 +389,14 @@ config USB_SERIAL_MOS7715_PARPORT depends on USB_SERIAL_MOS7720 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 select PARPORT_NOT_PC - ---help--- + help Say Y if you have a Moschip 7715 device and would like to use the parallel port it provides. The port will register with the parport subsystem as a low-level driver. config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" - ---help--- + help Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 Dual-Serial port device from MosChip Semiconductor. @@ -411,7 +410,7 @@ config USB_SERIAL_MOS7840 config USB_SERIAL_MXUPORT tristate "USB Moxa UPORT Serial Driver" - ---help--- + help Say Y here if you want to use a MOXA UPort Serial hub. This driver supports: @@ -457,7 +456,7 @@ config USB_SERIAL_OTI6858 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" help Say Y here if you want to use the OTi-6858 single port USB to serial - converter device. + converter device. To compile this driver as a module, choose M here: the module will be called oti6858. @@ -530,7 +529,7 @@ config USB_SERIAL_TI config USB_SERIAL_CYBERJACK tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" - ---help--- + help Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard reader. This is an interface to ISO 7816 compatible contact-based chipcards, e.g. GSM SIMs. @@ -540,17 +539,6 @@ config USB_SERIAL_CYBERJACK If unsure, say N. -config USB_SERIAL_XIRCOM - tristate "USB Xircom / Entrega Single Port Serial Driver" - select USB_EZUSB_FX2 - help - Say Y here if you want to use a Xircom or Entrega single port USB to - serial converter device. This driver makes use of firmware - developed from scratch by Brian Warner. - - To compile this driver as a module, choose M here: the - module will be called keyspan_pda. - config USB_SERIAL_WWAN tristate @@ -646,6 +634,15 @@ config USB_SERIAL_UPD78F0730 To compile this driver as a module, choose M here: the module will be called upd78f0730. +config USB_SERIAL_XR + tristate "USB MaxLinear/Exar USB to Serial driver" + help + Say Y here if you want to use MaxLinear/Exar USB to Serial converter + devices. + + To compile this driver as a module, choose M here: the + module will be called xr_serial. + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help |