diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 1855 |
1 files changed, 1263 insertions, 592 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f64e914a8985..36b25418b214 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Silicon Laboratories CP210x USB to RS232 serial adaptor driver * * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. + * Copyright (C) 2010-2021 Johan Hovold (johan@kernel.org) * * Support to set flow control line levels using TIOCMGET and TIOCMSET * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow @@ -19,9 +17,7 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/usb.h> -#include <linux/uaccess.h> #include <linux/usb/serial.h> #include <linux/gpio/driver.h> #include <linux/bitops.h> @@ -34,42 +30,49 @@ */ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *); static void cp210x_close(struct usb_serial_port *); -static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *); -static void cp210x_get_termios_port(struct usb_serial_port *port, - tcflag_t *cflagp, unsigned int *baudp); static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, - struct ktermios *); + const struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, - struct ktermios*); + const struct ktermios *); static bool cp210x_tx_empty(struct usb_serial_port *port); static int cp210x_tiocmget(struct tty_struct *); static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int, unsigned int); -static void cp210x_break_ctl(struct tty_struct *, int); +static int cp210x_break_ctl(struct tty_struct *, int); static int cp210x_attach(struct usb_serial *); static void cp210x_disconnect(struct usb_serial *); static void cp210x_release(struct usb_serial *); static int cp210x_port_probe(struct usb_serial_port *); -static int cp210x_port_remove(struct usb_serial_port *); -static void cp210x_dtr_rts(struct usb_serial_port *p, int on); +static void cp210x_port_remove(struct usb_serial_port *); +static void cp210x_dtr_rts(struct usb_serial_port *port, int on); +static void cp210x_process_read_urb(struct urb *urb); +static void cp210x_enable_event_mode(struct usb_serial_port *port); +static void cp210x_disable_event_mode(struct usb_serial_port *port); static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0404, 0x034C) }, /* NCR Retail IO Box */ { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x04BF, 0x1301) }, /* TDK Corporation NC0110013M - Network Controller */ + { USB_DEVICE(0x04BF, 0x1303) }, /* TDK Corporation MM0110113M - i3 Micro Module */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ + { USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ + { USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */ + { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */ + { USB_DEVICE(0x106F, 0x0003) }, /* CPI / Money Controls Bulk Coin Recycler */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ @@ -82,6 +85,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ + { USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ @@ -98,6 +102,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ + { USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -115,47 +122,70 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */ + { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */ + { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */ + { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ + { USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */ + { USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */ + { USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ + { USB_DEVICE(0x10C4, 0x863C) }, /* MGP Instruments PDS100 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x87ED) }, /* IMST USB-Stick for Smart Meter */ { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */ { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88D8) }, /* Acuity Brands nLight Air Adapter */ + { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */ + { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ + { USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ + { USB_DEVICE(0x10C4, 0x8A5B) }, /* CEL EM3588 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ + { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ + { USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */ + { USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ + { USB_DEVICE(0x11CA, 0x0212) }, /* Verifone USB to Printer (UART, CP2102) */ { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */ { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ + { USB_DEVICE(0x155A, 0x1006) }, /* ELDAT Easywave RX09 */ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ @@ -172,18 +202,28 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ + { USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */ + { USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */ + { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */ + { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */ + { USB_DEVICE(0x18EF, 0xE030) }, /* ELV ALC 8xxx Battery Charger */ + { USB_DEVICE(0x18EF, 0xE032) }, /* ELV TFD500 Data Logger */ { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */ { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */ { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */ + { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 M.2 Key E serial interface */ + { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 Display serial interface */ + { USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ + { USB_DEVICE(0x1B93, 0x1013) }, /* Phoenix Contact UPS Device */ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */ @@ -208,10 +248,12 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */ { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; @@ -221,21 +263,43 @@ MODULE_DEVICE_TABLE(usb, id_table); struct cp210x_serial_private { #ifdef CONFIG_GPIOLIB struct gpio_chip gc; - u8 config; - u8 gpio_mode; bool gpio_registered; + u16 gpio_pushpull; + u16 gpio_altfunc; + u16 gpio_input; #endif u8 partnum; + u32 fw_version; + speed_t min_speed; + speed_t max_speed; + bool use_actual_rate; + bool no_flow_control; + bool no_event_mode; +}; + +enum cp210x_event_state { + ES_DATA, + ES_ESCAPE, + ES_LSR, + ES_LSR_DATA_0, + ES_LSR_DATA_1, + ES_MSR }; struct cp210x_port_private { - __u8 bInterfaceNumber; - bool has_swapped_line_ctl; + u8 bInterfaceNumber; + bool event_mode; + enum cp210x_event_state event_state; + u8 lsr; + + struct mutex mutex; + bool crtscts; + bool dtr; + bool rts; }; static struct usb_serial_driver cp210x_device = { .driver = { - .owner = THIS_MODULE, .name = "cp210x", }, .id_table = id_table, @@ -247,14 +311,18 @@ static struct usb_serial_driver cp210x_device = { .break_ctl = cp210x_break_ctl, .set_termios = cp210x_set_termios, .tx_empty = cp210x_tx_empty, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, + .get_icount = usb_serial_generic_get_icount, .attach = cp210x_attach, .disconnect = cp210x_disconnect, .release = cp210x_release, .port_probe = cp210x_port_probe, .port_remove = cp210x_port_remove, - .dtr_rts = cp210x_dtr_rts + .dtr_rts = cp210x_dtr_rts, + .process_read_urb = cp210x_process_read_urb, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -337,7 +405,20 @@ static struct usb_serial_driver * const serial_drivers[] = { #define CONTROL_WRITE_DTR 0x0100 #define CONTROL_WRITE_RTS 0x0200 +/* CP210X_(GET|SET)_CHARS */ +struct cp210x_special_chars { + u8 bEofChar; + u8 bErrorChar; + u8 bBreakChar; + u8 bEventChar; + u8 bXonChar; + u8 bXoffChar; +}; + /* CP210X_VENDOR_SPECIFIC values */ +#define CP210X_GET_FW_VER 0x000E +#define CP210X_READ_2NCONFIG 0x000E +#define CP210X_GET_FW_VER_2N 0x0010 #define CP210X_READ_LATCH 0x00C2 #define CP210X_GET_PARTNUM 0x370B #define CP210X_GET_PORTCONFIG 0x370C @@ -351,6 +432,10 @@ static struct usb_serial_driver * const serial_drivers[] = { #define CP210X_PARTNUM_CP2104 0x04 #define CP210X_PARTNUM_CP2105 0x05 #define CP210X_PARTNUM_CP2108 0x08 +#define CP210X_PARTNUM_CP2102N_QFN28 0x20 +#define CP210X_PARTNUM_CP2102N_QFN24 0x21 +#define CP210X_PARTNUM_CP2102N_QFN20 0x22 +#define CP210X_PARTNUM_UNKNOWN 0xFF /* CP210X_GET_COMM_STATUS returns these 0x13 bytes */ struct cp210x_comm_status { @@ -371,27 +456,33 @@ struct cp210x_comm_status { */ #define PURGE_ALL 0x000f +/* CP210X_EMBED_EVENTS */ +#define CP210X_ESCCHAR 0xec + +#define CP210X_LSR_OVERRUN BIT(1) +#define CP210X_LSR_PARITY BIT(2) +#define CP210X_LSR_FRAME BIT(3) +#define CP210X_LSR_BREAK BIT(4) + + /* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */ struct cp210x_flow_ctl { __le32 ulControlHandshake; __le32 ulFlowReplace; __le32 ulXonLimit; __le32 ulXoffLimit; -} __packed; +}; /* cp210x_flow_ctl::ulControlHandshake */ #define CP210X_SERIAL_DTR_MASK GENMASK(1, 0) -#define CP210X_SERIAL_DTR_SHIFT(_mode) (_mode) +#define CP210X_SERIAL_DTR_INACTIVE (0 << 0) +#define CP210X_SERIAL_DTR_ACTIVE (1 << 0) +#define CP210X_SERIAL_DTR_FLOW_CTL (2 << 0) #define CP210X_SERIAL_CTS_HANDSHAKE BIT(3) #define CP210X_SERIAL_DSR_HANDSHAKE BIT(4) #define CP210X_SERIAL_DCD_HANDSHAKE BIT(5) #define CP210X_SERIAL_DSR_SENSITIVITY BIT(6) -/* values for cp210x_flow_ctl::ulControlHandshake::CP210X_SERIAL_DTR_MASK */ -#define CP210X_SERIAL_DTR_INACTIVE 0 -#define CP210X_SERIAL_DTR_ACTIVE 1 -#define CP210X_SERIAL_DTR_FLOW_CTL 2 - /* cp210x_flow_ctl::ulFlowReplace */ #define CP210X_SERIAL_AUTO_TRANSMIT BIT(0) #define CP210X_SERIAL_AUTO_RECEIVE BIT(1) @@ -399,28 +490,25 @@ struct cp210x_flow_ctl { #define CP210X_SERIAL_NULL_STRIPPING BIT(3) #define CP210X_SERIAL_BREAK_CHAR BIT(4) #define CP210X_SERIAL_RTS_MASK GENMASK(7, 6) -#define CP210X_SERIAL_RTS_SHIFT(_mode) (_mode << 6) +#define CP210X_SERIAL_RTS_INACTIVE (0 << 6) +#define CP210X_SERIAL_RTS_ACTIVE (1 << 6) +#define CP210X_SERIAL_RTS_FLOW_CTL (2 << 6) #define CP210X_SERIAL_XOFF_CONTINUE BIT(31) -/* values for cp210x_flow_ctl::ulFlowReplace::CP210X_SERIAL_RTS_MASK */ -#define CP210X_SERIAL_RTS_INACTIVE 0 -#define CP210X_SERIAL_RTS_ACTIVE 1 -#define CP210X_SERIAL_RTS_FLOW_CTL 2 - /* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */ struct cp210x_pin_mode { u8 eci; u8 sci; -} __packed; +}; #define CP210X_PIN_MODE_MODEM 0 #define CP210X_PIN_MODE_GPIO BIT(0) /* - * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes. - * Structure needs padding due to unused/unspecified bytes. + * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes + * on a CP2105 chip. Structure needs padding due to unused/unspecified bytes. */ -struct cp210x_config { +struct cp210x_dual_port_config { __le16 gpio_mode; u8 __pad0[2]; __le16 reset_state; @@ -431,6 +519,19 @@ struct cp210x_config { u8 device_cfg; } __packed; +/* + * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes + * on a CP2104 chip. Structure needs padding due to unused/unspecified bytes. + */ +struct cp210x_single_port_config { + __le16 gpio_mode; + u8 __pad0[2]; + __le16 reset_state; + u8 __pad1[4]; + __le16 suspend_state; + u8 device_cfg; +} __packed; + /* GPIO modes */ #define CP210X_SCI_GPIO_MODE_OFFSET 9 #define CP210X_SCI_GPIO_MODE_MASK GENMASK(11, 9) @@ -438,16 +539,90 @@ struct cp210x_config { #define CP210X_ECI_GPIO_MODE_OFFSET 2 #define CP210X_ECI_GPIO_MODE_MASK GENMASK(3, 2) +#define CP210X_GPIO_MODE_OFFSET 8 +#define CP210X_GPIO_MODE_MASK GENMASK(11, 8) + /* CP2105 port configuration values */ #define CP2105_GPIO0_TXLED_MODE BIT(0) #define CP2105_GPIO1_RXLED_MODE BIT(1) #define CP2105_GPIO1_RS485_MODE BIT(2) -/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */ +/* CP2104 port configuration values */ +#define CP2104_GPIO0_TXLED_MODE BIT(0) +#define CP2104_GPIO1_RXLED_MODE BIT(1) +#define CP2104_GPIO2_RS485_MODE BIT(2) + +struct cp210x_quad_port_state { + __le16 gpio_mode_pb0; + __le16 gpio_mode_pb1; + __le16 gpio_mode_pb2; + __le16 gpio_mode_pb3; + __le16 gpio_mode_pb4; + + __le16 gpio_lowpower_pb0; + __le16 gpio_lowpower_pb1; + __le16 gpio_lowpower_pb2; + __le16 gpio_lowpower_pb3; + __le16 gpio_lowpower_pb4; + + __le16 gpio_latch_pb0; + __le16 gpio_latch_pb1; + __le16 gpio_latch_pb2; + __le16 gpio_latch_pb3; + __le16 gpio_latch_pb4; +}; + +/* + * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0x49 bytes + * on a CP2108 chip. + * + * See https://www.silabs.com/documents/public/application-notes/an978-cp210x-usb-to-uart-api-specification.pdf + */ +struct cp210x_quad_port_config { + struct cp210x_quad_port_state reset_state; + struct cp210x_quad_port_state suspend_state; + u8 ipdelay_ifc[4]; + u8 enhancedfxn_ifc[4]; + u8 enhancedfxn_device; + u8 extclkfreq[4]; +} __packed; + +#define CP2108_EF_IFC_GPIO_TXLED 0x01 +#define CP2108_EF_IFC_GPIO_RXLED 0x02 +#define CP2108_EF_IFC_GPIO_RS485 0x04 +#define CP2108_EF_IFC_GPIO_RS485_LOGIC 0x08 +#define CP2108_EF_IFC_GPIO_CLOCK 0x10 +#define CP2108_EF_IFC_DYNAMIC_SUSPEND 0x40 + +/* CP2102N configuration array indices */ +#define CP210X_2NCONFIG_CONFIG_VERSION_IDX 2 +#define CP210X_2NCONFIG_GPIO_MODE_IDX 581 +#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587 +#define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600 + +/* CP2102N QFN20 port configuration values */ +#define CP2102N_QFN20_GPIO2_TXLED_MODE BIT(2) +#define CP2102N_QFN20_GPIO3_RXLED_MODE BIT(3) +#define CP2102N_QFN20_GPIO1_RS485_MODE BIT(4) +#define CP2102N_QFN20_GPIO0_CLK_MODE BIT(6) + +/* + * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x02 bytes + * for CP2102N, CP2103, CP2104 and CP2105. + */ struct cp210x_gpio_write { u8 mask; u8 state; -} __packed; +}; + +/* + * CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x04 bytes + * for CP2108. + */ +struct cp210x_gpio_write16 { + __le16 mask; + __le16 state; +}; /* * Helper to get interface number when we only have struct usb_serial. @@ -470,81 +645,19 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req, { struct usb_serial *serial = port->serial; struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - void *dmabuf; int result; - dmabuf = kmalloc(bufsize, GFP_KERNEL); - if (!dmabuf) { - /* - * FIXME Some callers don't bother to check for error, - * at least give them consistent junk until they are fixed - */ - memset(buf, 0, bufsize); - return -ENOMEM; - } - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - req, REQTYPE_INTERFACE_TO_HOST, 0, - port_priv->bInterfaceNumber, dmabuf, bufsize, - USB_CTRL_SET_TIMEOUT); - if (result == bufsize) { - memcpy(buf, dmabuf, bufsize); - result = 0; - } else { + result = usb_control_msg_recv(serial->dev, 0, req, + REQTYPE_INTERFACE_TO_HOST, 0, + port_priv->bInterfaceNumber, buf, bufsize, + USB_CTRL_SET_TIMEOUT, GFP_KERNEL); + if (result) { dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n", req, bufsize, result); - if (result >= 0) - result = -EIO; - - /* - * FIXME Some callers don't bother to check for error, - * at least give them consistent junk until they are fixed - */ - memset(buf, 0, bufsize); - } - - kfree(dmabuf); - - return result; -} - -/* - * Reads any 32-bit CP210X_ register identified by req. - */ -static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val) -{ - __le32 le32_val; - int err; - - err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val)); - if (err) { - /* - * FIXME Some callers don't bother to check for error, - * at least give them consistent junk until they are fixed - */ - *val = 0; - return err; + return result; } - *val = le32_to_cpu(le32_val); - - return 0; -} - -/* - * Reads any 16-bit CP210X_ register identified by req. - */ -static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val) -{ - __le16 le16_val; - int err; - - err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val)); - if (err) - return err; - - *val = le16_to_cpu(le16_val); - return 0; } @@ -563,31 +676,19 @@ static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val) static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val, void *buf, int bufsize) { - void *dmabuf; int result; - dmabuf = kmalloc(bufsize, GFP_KERNEL); - if (!dmabuf) - return -ENOMEM; - - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - CP210X_VENDOR_SPECIFIC, type, val, - cp210x_interface_num(serial), dmabuf, bufsize, - USB_CTRL_GET_TIMEOUT); - if (result == bufsize) { - memcpy(buf, dmabuf, bufsize); - result = 0; - } else { + result = usb_control_msg_recv(serial->dev, 0, CP210X_VENDOR_SPECIFIC, + type, val, cp210x_interface_num(serial), buf, bufsize, + USB_CTRL_GET_TIMEOUT, GFP_KERNEL); + if (result) { dev_err(&serial->interface->dev, "failed to get vendor val 0x%04x size %d: %d\n", val, bufsize, result); - if (result >= 0) - result = -EIO; + return result; } - kfree(dmabuf); - - return result; + return 0; } /* @@ -621,30 +722,19 @@ static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req, { struct usb_serial *serial = port->serial; struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - void *dmabuf; int result; - dmabuf = kmemdup(buf, bufsize, GFP_KERNEL); - if (!dmabuf) - return -ENOMEM; - - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - req, REQTYPE_HOST_TO_INTERFACE, 0, - port_priv->bInterfaceNumber, dmabuf, bufsize, - USB_CTRL_SET_TIMEOUT); - - kfree(dmabuf); - - if (result == bufsize) { - result = 0; - } else { + result = usb_control_msg_send(serial->dev, 0, req, + REQTYPE_HOST_TO_INTERFACE, 0, + port_priv->bInterfaceNumber, buf, bufsize, + USB_CTRL_SET_TIMEOUT, GFP_KERNEL); + if (result) { dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n", req, bufsize, result); - if (result >= 0) - result = -EIO; + return result; } - return result; + return 0; } /* @@ -667,157 +757,166 @@ static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val) static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type, u16 val, void *buf, int bufsize) { - void *dmabuf; int result; - dmabuf = kmemdup(buf, bufsize, GFP_KERNEL); - if (!dmabuf) - return -ENOMEM; - - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - CP210X_VENDOR_SPECIFIC, type, val, - cp210x_interface_num(serial), dmabuf, bufsize, - USB_CTRL_SET_TIMEOUT); - - kfree(dmabuf); - - if (result == bufsize) { - result = 0; - } else { + result = usb_control_msg_send(serial->dev, 0, CP210X_VENDOR_SPECIFIC, + type, val, cp210x_interface_num(serial), buf, bufsize, + USB_CTRL_SET_TIMEOUT, GFP_KERNEL); + if (result) { dev_err(&serial->interface->dev, "failed to set vendor val 0x%04x size %d: %d\n", val, bufsize, result); - if (result >= 0) - result = -EIO; + return result; } - return result; + return 0; } #endif -/* - * Detect CP2108 GET_LINE_CTL bug and activate workaround. - * Write a known good value 0x800, read it back. - * If it comes back swapped the bug is detected. - * Preserve the original register value. - */ -static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port) +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) { struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - u16 line_ctl_save; - u16 line_ctl_test; - int err; + int result; - err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save); - if (err) - return err; + result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE); + if (result) { + dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); + return result; + } - err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800); - if (err) - return err; + if (tty) + cp210x_set_termios(tty, port, NULL); - err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test); - if (err) - return err; + result = usb_serial_generic_open(tty, port); + if (result) + goto err_disable; - if (line_ctl_test == 8) { - port_priv->has_swapped_line_ctl = true; - line_ctl_save = swab16(line_ctl_save); - } + return 0; - return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save); +err_disable: + cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE); + port_priv->event_mode = false; + + return result; } -/* - * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL) - * to workaround cp2108 bug and get correct value. - */ -static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl) +static void cp210x_close(struct usb_serial_port *port) { struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - int err; - err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl); - if (err) - return err; + usb_serial_generic_close(port); - /* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */ - if (port_priv->has_swapped_line_ctl) - *ctl = swab16(*ctl); + /* Clear both queues; cp2108 needs this to avoid an occasional hang */ + cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL); - return 0; -} + cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE); -/* - * cp210x_quantise_baudrate - * Quantises the baud rate as per AN205 Table 1 - */ -static unsigned int cp210x_quantise_baudrate(unsigned int baud) -{ - if (baud <= 300) - baud = 300; - else if (baud <= 600) baud = 600; - else if (baud <= 1200) baud = 1200; - else if (baud <= 1800) baud = 1800; - else if (baud <= 2400) baud = 2400; - else if (baud <= 4000) baud = 4000; - else if (baud <= 4803) baud = 4800; - else if (baud <= 7207) baud = 7200; - else if (baud <= 9612) baud = 9600; - else if (baud <= 14428) baud = 14400; - else if (baud <= 16062) baud = 16000; - else if (baud <= 19250) baud = 19200; - else if (baud <= 28912) baud = 28800; - else if (baud <= 38601) baud = 38400; - else if (baud <= 51558) baud = 51200; - else if (baud <= 56280) baud = 56000; - else if (baud <= 58053) baud = 57600; - else if (baud <= 64111) baud = 64000; - else if (baud <= 77608) baud = 76800; - else if (baud <= 117028) baud = 115200; - else if (baud <= 129347) baud = 128000; - else if (baud <= 156868) baud = 153600; - else if (baud <= 237832) baud = 230400; - else if (baud <= 254234) baud = 250000; - else if (baud <= 273066) baud = 256000; - else if (baud <= 491520) baud = 460800; - else if (baud <= 567138) baud = 500000; - else if (baud <= 670254) baud = 576000; - else if (baud < 1000000) - baud = 921600; - else if (baud > 2000000) - baud = 2000000; - return baud; + /* Disabling the interface disables event-insertion mode. */ + port_priv->event_mode = false; } -static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) +static void cp210x_process_lsr(struct usb_serial_port *port, unsigned char lsr, char *flag) { - int result; + if (lsr & CP210X_LSR_BREAK) { + port->icount.brk++; + *flag = TTY_BREAK; + } else if (lsr & CP210X_LSR_PARITY) { + port->icount.parity++; + *flag = TTY_PARITY; + } else if (lsr & CP210X_LSR_FRAME) { + port->icount.frame++; + *flag = TTY_FRAME; + } - result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE); - if (result) { - dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); - return result; + if (lsr & CP210X_LSR_OVERRUN) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } +} - /* Configure the termios structure */ - cp210x_get_termios(tty, port); +static bool cp210x_process_char(struct usb_serial_port *port, unsigned char *ch, char *flag) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - /* The baud rate must be initialised on cp2104 */ - if (tty) - cp210x_change_speed(tty, port, NULL); + switch (port_priv->event_state) { + case ES_DATA: + if (*ch == CP210X_ESCCHAR) { + port_priv->event_state = ES_ESCAPE; + break; + } + return false; + case ES_ESCAPE: + switch (*ch) { + case 0: + dev_dbg(&port->dev, "%s - escape char\n", __func__); + *ch = CP210X_ESCCHAR; + port_priv->event_state = ES_DATA; + return false; + case 1: + port_priv->event_state = ES_LSR_DATA_0; + break; + case 2: + port_priv->event_state = ES_LSR; + break; + case 3: + port_priv->event_state = ES_MSR; + break; + default: + dev_err(&port->dev, "malformed event 0x%02x\n", *ch); + port_priv->event_state = ES_DATA; + break; + } + break; + case ES_LSR_DATA_0: + port_priv->lsr = *ch; + port_priv->event_state = ES_LSR_DATA_1; + break; + case ES_LSR_DATA_1: + dev_dbg(&port->dev, "%s - lsr = 0x%02x, data = 0x%02x\n", + __func__, port_priv->lsr, *ch); + cp210x_process_lsr(port, port_priv->lsr, flag); + port_priv->event_state = ES_DATA; + return false; + case ES_LSR: + dev_dbg(&port->dev, "%s - lsr = 0x%02x\n", __func__, *ch); + port_priv->lsr = *ch; + cp210x_process_lsr(port, port_priv->lsr, flag); + port_priv->event_state = ES_DATA; + break; + case ES_MSR: + dev_dbg(&port->dev, "%s - msr = 0x%02x\n", __func__, *ch); + /* unimplemented */ + port_priv->event_state = ES_DATA; + break; + } - return usb_serial_generic_open(tty, port); + return true; } -static void cp210x_close(struct usb_serial_port *port) +static void cp210x_process_read_urb(struct urb *urb) { - usb_serial_generic_close(port); + struct usb_serial_port *port = urb->context; + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + unsigned char *ch = urb->transfer_buffer; + char flag; + int i; - /* Clear both queues; cp2108 needs this to avoid an occasional hang */ - cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL); + if (!urb->actual_length) + return; - cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE); + if (port_priv->event_mode) { + for (i = 0; i < urb->actual_length; i++, ch++) { + flag = TTY_NORMAL; + + if (cp210x_process_char(port, ch, &flag)) + continue; + + tty_insert_flip_char(&port->port, *ch, flag); + } + } else { + tty_insert_flip_string(&port->port, ch, urb->actual_length); + } + tty_flip_buffer_push(&port->port); } /* @@ -828,29 +927,21 @@ static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port, { struct usb_serial *serial = port->serial; struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - struct cp210x_comm_status *sts; + struct cp210x_comm_status sts; int result; - sts = kmalloc(sizeof(*sts), GFP_KERNEL); - if (!sts) - return -ENOMEM; - - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST, - 0, port_priv->bInterfaceNumber, sts, sizeof(*sts), - USB_CTRL_GET_TIMEOUT); - if (result == sizeof(*sts)) { - *count = le32_to_cpu(sts->ulAmountInOutQueue); - result = 0; - } else { + result = usb_control_msg_recv(serial->dev, 0, CP210X_GET_COMM_STATUS, + REQTYPE_INTERFACE_TO_HOST, 0, + port_priv->bInterfaceNumber, &sts, sizeof(sts), + USB_CTRL_GET_TIMEOUT, GFP_KERNEL); + if (result) { dev_err(&port->dev, "failed to get comm status: %d\n", result); - if (result >= 0) - result = -EIO; + return result; } - kfree(sts); + *count = le32_to_cpu(sts.ulAmountInOutQueue); - return result; + return 0; } static bool cp210x_tx_empty(struct usb_serial_port *port) @@ -865,148 +956,70 @@ static bool cp210x_tx_empty(struct usb_serial_port *port) return !count; } -/* - * cp210x_get_termios - * Reads the baud rate, data bits, parity, stop bits and flow control mode - * from the device, corrects any unsupported values, and configures the - * termios structure to reflect the state of the device - */ -static void cp210x_get_termios(struct tty_struct *tty, - struct usb_serial_port *port) -{ - unsigned int baud; +struct cp210x_rate { + speed_t rate; + speed_t high; +}; - if (tty) { - cp210x_get_termios_port(tty->driver_data, - &tty->termios.c_cflag, &baud); - tty_encode_baud_rate(tty, baud, baud); - } else { - tcflag_t cflag; - cflag = 0; - cp210x_get_termios_port(port, &cflag, &baud); - } -} +static const struct cp210x_rate cp210x_an205_table1[] = { + { 300, 300 }, + { 600, 600 }, + { 1200, 1200 }, + { 1800, 1800 }, + { 2400, 2400 }, + { 4000, 4000 }, + { 4800, 4803 }, + { 7200, 7207 }, + { 9600, 9612 }, + { 14400, 14428 }, + { 16000, 16062 }, + { 19200, 19250 }, + { 28800, 28912 }, + { 38400, 38601 }, + { 51200, 51558 }, + { 56000, 56280 }, + { 57600, 58053 }, + { 64000, 64111 }, + { 76800, 77608 }, + { 115200, 117028 }, + { 128000, 129347 }, + { 153600, 156868 }, + { 230400, 237832 }, + { 250000, 254234 }, + { 256000, 273066 }, + { 460800, 491520 }, + { 500000, 567138 }, + { 576000, 670254 }, + { 921600, UINT_MAX } +}; /* - * cp210x_get_termios_port - * This is the heart of cp210x_get_termios which always uses a &usb_serial_port. + * Quantises the baud rate as per AN205 Table 1 */ -static void cp210x_get_termios_port(struct usb_serial_port *port, - tcflag_t *cflagp, unsigned int *baudp) +static speed_t cp210x_get_an205_rate(speed_t baud) { - struct device *dev = &port->dev; - tcflag_t cflag; - struct cp210x_flow_ctl flow_ctl; - u32 baud; - u16 bits; - u32 ctl_hs; - - cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud); - - dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); - *baudp = baud; + int i; - cflag = *cflagp; - - cp210x_get_line_ctl(port, &bits); - cflag &= ~CSIZE; - switch (bits & BITS_DATA_MASK) { - case BITS_DATA_5: - dev_dbg(dev, "%s - data bits = 5\n", __func__); - cflag |= CS5; - break; - case BITS_DATA_6: - dev_dbg(dev, "%s - data bits = 6\n", __func__); - cflag |= CS6; - break; - case BITS_DATA_7: - dev_dbg(dev, "%s - data bits = 7\n", __func__); - cflag |= CS7; - break; - case BITS_DATA_8: - dev_dbg(dev, "%s - data bits = 8\n", __func__); - cflag |= CS8; - break; - case BITS_DATA_9: - dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__); - cflag |= CS8; - bits &= ~BITS_DATA_MASK; - bits |= BITS_DATA_8; - cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); - break; - default: - dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__); - cflag |= CS8; - bits &= ~BITS_DATA_MASK; - bits |= BITS_DATA_8; - cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); - break; + for (i = 0; i < ARRAY_SIZE(cp210x_an205_table1); ++i) { + if (baud <= cp210x_an205_table1[i].high) + break; } - switch (bits & BITS_PARITY_MASK) { - case BITS_PARITY_NONE: - dev_dbg(dev, "%s - parity = NONE\n", __func__); - cflag &= ~PARENB; - break; - case BITS_PARITY_ODD: - dev_dbg(dev, "%s - parity = ODD\n", __func__); - cflag |= (PARENB|PARODD); - break; - case BITS_PARITY_EVEN: - dev_dbg(dev, "%s - parity = EVEN\n", __func__); - cflag &= ~PARODD; - cflag |= PARENB; - break; - case BITS_PARITY_MARK: - dev_dbg(dev, "%s - parity = MARK\n", __func__); - cflag |= (PARENB|PARODD|CMSPAR); - break; - case BITS_PARITY_SPACE: - dev_dbg(dev, "%s - parity = SPACE\n", __func__); - cflag &= ~PARODD; - cflag |= (PARENB|CMSPAR); - break; - default: - dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); - break; - } + return cp210x_an205_table1[i].rate; +} - cflag &= ~CSTOPB; - switch (bits & BITS_STOP_MASK) { - case BITS_STOP_1: - dev_dbg(dev, "%s - stop bits = 1\n", __func__); - break; - case BITS_STOP_1_5: - dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__); - bits &= ~BITS_STOP_MASK; - cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); - break; - case BITS_STOP_2: - dev_dbg(dev, "%s - stop bits = 2\n", __func__); - cflag |= CSTOPB; - break; - default: - dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__); - bits &= ~BITS_STOP_MASK; - cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); - break; - } +static speed_t cp210x_get_actual_rate(speed_t baud) +{ + unsigned int prescale = 1; + unsigned int div; - cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl, - sizeof(flow_ctl)); - ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); - if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) { - dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); - cflag |= CRTSCTS; - } else { - dev_dbg(dev, "%s - flow control = NONE\n", __func__); - cflag &= ~CRTSCTS; - } + if (baud <= 365) + prescale = 4; + + div = DIV_ROUND_CLOSEST(48000000, 2 * prescale * baud); + baud = 48000000 / (2 * prescale * div); - *cflagp = cflag; + return baud; } /* @@ -1036,18 +1049,26 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, * otherwise. */ static void cp210x_change_speed(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { + struct usb_serial *serial = port->serial; + struct cp210x_serial_private *priv = usb_get_serial_data(serial); u32 baud; - baud = tty->termios.c_ospeed; + if (tty->termios.c_ospeed == 0) + return; - /* This maps the requested rate to a rate valid on cp2102 or cp2103, - * or to an arbitrary rate in [1M,2M]. - * - * NOTE: B0 is not implemented. + /* + * This maps the requested rate to the actual rate, a valid rate on + * cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed]. */ - baud = cp210x_quantise_baudrate(baud); + baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed); + + if (priv->use_actual_rate) + baud = cp210x_get_actual_rate(baud); + else if (baud < 1000000) + baud = cp210x_get_an205_rate(baud); dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud); if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) { @@ -1061,128 +1082,248 @@ static void cp210x_change_speed(struct tty_struct *tty, tty_encode_baud_rate(tty, baud, baud); } +static void cp210x_enable_event_mode(struct usb_serial_port *port) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + int ret; + + if (port_priv->event_mode) + return; + + if (priv->no_event_mode) + return; + + port_priv->event_state = ES_DATA; + port_priv->event_mode = true; + + ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, CP210X_ESCCHAR); + if (ret) { + dev_err(&port->dev, "failed to enable events: %d\n", ret); + port_priv->event_mode = false; + } +} + +static void cp210x_disable_event_mode(struct usb_serial_port *port) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + int ret; + + if (!port_priv->event_mode) + return; + + ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, 0); + if (ret) { + dev_err(&port->dev, "failed to disable events: %d\n", ret); + return; + } + + port_priv->event_mode = false; +} + +static bool cp210x_termios_change(const struct ktermios *a, const struct ktermios *b) +{ + bool iflag_change, cc_change; + + iflag_change = ((a->c_iflag ^ b->c_iflag) & (INPCK | IXON | IXOFF)); + cc_change = a->c_cc[VSTART] != b->c_cc[VSTART] || + a->c_cc[VSTOP] != b->c_cc[VSTOP]; + + return tty_termios_hw_change(a, b) || iflag_change || cc_change; +} + +static void cp210x_set_flow_control(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_special_chars chars; + struct cp210x_flow_ctl flow_ctl; + u32 flow_repl; + u32 ctl_hs; + bool crtscts; + int ret; + + /* + * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum + * CP2102N_E104). Report back that flow control is not supported. + */ + if (priv->no_flow_control) { + tty->termios.c_cflag &= ~CRTSCTS; + tty->termios.c_iflag &= ~(IXON | IXOFF); + } + + if (tty->termios.c_ospeed != 0 && + old_termios && old_termios->c_ospeed != 0 && + C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) && + I_IXON(tty) == (old_termios->c_iflag & IXON) && + I_IXOFF(tty) == (old_termios->c_iflag & IXOFF) && + START_CHAR(tty) == old_termios->c_cc[VSTART] && + STOP_CHAR(tty) == old_termios->c_cc[VSTOP]) { + return; + } + + if (I_IXON(tty) || I_IXOFF(tty)) { + memset(&chars, 0, sizeof(chars)); + + chars.bXonChar = START_CHAR(tty); + chars.bXoffChar = STOP_CHAR(tty); + + ret = cp210x_write_reg_block(port, CP210X_SET_CHARS, &chars, + sizeof(chars)); + if (ret) { + dev_err(&port->dev, "failed to set special chars: %d\n", + ret); + } + } + + mutex_lock(&port_priv->mutex); + + if (tty->termios.c_ospeed == 0) { + port_priv->dtr = false; + port_priv->rts = false; + } else if (old_termios && old_termios->c_ospeed == 0) { + port_priv->dtr = true; + port_priv->rts = true; + } + + ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl, + sizeof(flow_ctl)); + if (ret) + goto out_unlock; + + ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); + flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace); + + ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE; + ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE; + ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY; + ctl_hs &= ~CP210X_SERIAL_DTR_MASK; + if (port_priv->dtr) + ctl_hs |= CP210X_SERIAL_DTR_ACTIVE; + else + ctl_hs |= CP210X_SERIAL_DTR_INACTIVE; + + flow_repl &= ~CP210X_SERIAL_RTS_MASK; + if (C_CRTSCTS(tty)) { + ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE; + if (port_priv->rts) + flow_repl |= CP210X_SERIAL_RTS_FLOW_CTL; + else + flow_repl |= CP210X_SERIAL_RTS_INACTIVE; + crtscts = true; + } else { + ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE; + if (port_priv->rts) + flow_repl |= CP210X_SERIAL_RTS_ACTIVE; + else + flow_repl |= CP210X_SERIAL_RTS_INACTIVE; + crtscts = false; + } + + if (I_IXOFF(tty)) { + flow_repl |= CP210X_SERIAL_AUTO_RECEIVE; + + flow_ctl.ulXonLimit = cpu_to_le32(128); + flow_ctl.ulXoffLimit = cpu_to_le32(128); + } else { + flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE; + } + + if (I_IXON(tty)) + flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT; + else + flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT; + + dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__, + ctl_hs, flow_repl); + + flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs); + flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl); + + ret = cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl, + sizeof(flow_ctl)); + if (ret) + goto out_unlock; + + port_priv->crtscts = crtscts; +out_unlock: + mutex_unlock(&port_priv->mutex); +} + static void cp210x_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { - struct device *dev = &port->dev; - unsigned int cflag, old_cflag; + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); u16 bits; + int ret; - cflag = tty->termios.c_cflag; - old_cflag = old_termios->c_cflag; + if (old_termios && !cp210x_termios_change(&tty->termios, old_termios) && + tty->termios.c_ospeed != 0) + return; - if (tty->termios.c_ospeed != old_termios->c_ospeed) + if (!old_termios || tty->termios.c_ospeed != old_termios->c_ospeed) cp210x_change_speed(tty, port, old_termios); - /* If the number of data bits is to be updated */ - if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp210x_get_line_ctl(port, &bits); - bits &= ~BITS_DATA_MASK; - switch (cflag & CSIZE) { - case CS5: - bits |= BITS_DATA_5; - dev_dbg(dev, "%s - data bits = 5\n", __func__); - break; - case CS6: - bits |= BITS_DATA_6; - dev_dbg(dev, "%s - data bits = 6\n", __func__); - break; - case CS7: - bits |= BITS_DATA_7; - dev_dbg(dev, "%s - data bits = 7\n", __func__); - break; - case CS8: - default: - bits |= BITS_DATA_8; - dev_dbg(dev, "%s - data bits = 8\n", __func__); - break; - } - if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits)) - dev_dbg(dev, "Number of data bits requested not supported by device\n"); + /* CP2101 only supports CS8, 1 stop bit and non-stick parity. */ + if (priv->partnum == CP210X_PARTNUM_CP2101) { + tty->termios.c_cflag &= ~(CSIZE | CSTOPB | CMSPAR); + tty->termios.c_cflag |= CS8; } - if ((cflag & (PARENB|PARODD|CMSPAR)) != - (old_cflag & (PARENB|PARODD|CMSPAR))) { - cp210x_get_line_ctl(port, &bits); - bits &= ~BITS_PARITY_MASK; - if (cflag & PARENB) { - if (cflag & CMSPAR) { - if (cflag & PARODD) { - bits |= BITS_PARITY_MARK; - dev_dbg(dev, "%s - parity = MARK\n", __func__); - } else { - bits |= BITS_PARITY_SPACE; - dev_dbg(dev, "%s - parity = SPACE\n", __func__); - } - } else { - if (cflag & PARODD) { - bits |= BITS_PARITY_ODD; - dev_dbg(dev, "%s - parity = ODD\n", __func__); - } else { - bits |= BITS_PARITY_EVEN; - dev_dbg(dev, "%s - parity = EVEN\n", __func__); - } - } - } - if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits)) - dev_dbg(dev, "Parity mode not supported by device\n"); + bits = 0; + + switch (C_CSIZE(tty)) { + case CS5: + bits |= BITS_DATA_5; + break; + case CS6: + bits |= BITS_DATA_6; + break; + case CS7: + bits |= BITS_DATA_7; + break; + case CS8: + default: + bits |= BITS_DATA_8; + break; } - if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp210x_get_line_ctl(port, &bits); - bits &= ~BITS_STOP_MASK; - if (cflag & CSTOPB) { - bits |= BITS_STOP_2; - dev_dbg(dev, "%s - stop bits = 2\n", __func__); + if (C_PARENB(tty)) { + if (C_CMSPAR(tty)) { + if (C_PARODD(tty)) + bits |= BITS_PARITY_MARK; + else + bits |= BITS_PARITY_SPACE; } else { - bits |= BITS_STOP_1; - dev_dbg(dev, "%s - stop bits = 1\n", __func__); + if (C_PARODD(tty)) + bits |= BITS_PARITY_ODD; + else + bits |= BITS_PARITY_EVEN; } - if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits)) - dev_dbg(dev, "Number of stop bits requested not supported by device\n"); } - if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - struct cp210x_flow_ctl flow_ctl; - u32 ctl_hs; - u32 flow_repl; - - cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl, - sizeof(flow_ctl)); - ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); - flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace); - dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n", - __func__, ctl_hs, flow_repl); - - ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE; - ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE; - ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY; - ctl_hs &= ~CP210X_SERIAL_DTR_MASK; - ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE); - if (cflag & CRTSCTS) { - ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE; - - flow_repl &= ~CP210X_SERIAL_RTS_MASK; - flow_repl |= CP210X_SERIAL_RTS_SHIFT( - CP210X_SERIAL_RTS_FLOW_CTL); - dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); - } else { - ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE; + if (C_CSTOPB(tty)) + bits |= BITS_STOP_2; + else + bits |= BITS_STOP_1; - flow_repl &= ~CP210X_SERIAL_RTS_MASK; - flow_repl |= CP210X_SERIAL_RTS_SHIFT( - CP210X_SERIAL_RTS_ACTIVE); - dev_dbg(dev, "%s - flow control = NONE\n", __func__); - } + ret = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); + if (ret) + dev_err(&port->dev, "failed to set line control: %d\n", ret); - dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n", - __func__, ctl_hs, flow_repl); - flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs); - flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl); - cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl, - sizeof(flow_ctl)); - } + cp210x_set_flow_control(tty, port, old_termios); + /* + * Enable event-insertion mode only if input parity checking is + * enabled for now. + */ + if (I_INPCK(tty)) + cp210x_enable_event_mode(port); + else + cp210x_disable_event_mode(port); } static int cp210x_tiocmset(struct tty_struct *tty, @@ -1195,36 +1336,85 @@ static int cp210x_tiocmset(struct tty_struct *tty, static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int set, unsigned int clear) { + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_flow_ctl flow_ctl; + u32 ctl_hs, flow_repl; u16 control = 0; + int ret; + + mutex_lock(&port_priv->mutex); if (set & TIOCM_RTS) { + port_priv->rts = true; control |= CONTROL_RTS; control |= CONTROL_WRITE_RTS; } if (set & TIOCM_DTR) { + port_priv->dtr = true; control |= CONTROL_DTR; control |= CONTROL_WRITE_DTR; } if (clear & TIOCM_RTS) { + port_priv->rts = false; control &= ~CONTROL_RTS; control |= CONTROL_WRITE_RTS; } if (clear & TIOCM_DTR) { + port_priv->dtr = false; control &= ~CONTROL_DTR; control |= CONTROL_WRITE_DTR; } - dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control); + /* + * Use SET_FLOW to set DTR and enable/disable auto-RTS when hardware + * flow control is enabled. + */ + if (port_priv->crtscts && control & CONTROL_WRITE_RTS) { + ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl, + sizeof(flow_ctl)); + if (ret) + goto out_unlock; - return cp210x_write_u16_reg(port, CP210X_SET_MHS, control); + ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); + flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace); + + ctl_hs &= ~CP210X_SERIAL_DTR_MASK; + if (port_priv->dtr) + ctl_hs |= CP210X_SERIAL_DTR_ACTIVE; + else + ctl_hs |= CP210X_SERIAL_DTR_INACTIVE; + + flow_repl &= ~CP210X_SERIAL_RTS_MASK; + if (port_priv->rts) + flow_repl |= CP210X_SERIAL_RTS_FLOW_CTL; + else + flow_repl |= CP210X_SERIAL_RTS_INACTIVE; + + flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs); + flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl); + + dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", + __func__, ctl_hs, flow_repl); + + ret = cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl, + sizeof(flow_ctl)); + } else { + dev_dbg(&port->dev, "%s - control = 0x%04x\n", __func__, control); + + ret = cp210x_write_u16_reg(port, CP210X_SET_MHS, control); + } +out_unlock: + mutex_unlock(&port_priv->mutex); + + return ret; } -static void cp210x_dtr_rts(struct usb_serial_port *p, int on) +static void cp210x_dtr_rts(struct usb_serial_port *port, int on) { if (on) - cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0); + cp210x_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0); else - cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS); + cp210x_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS); } static int cp210x_tiocmget(struct tty_struct *tty) @@ -1244,92 +1434,176 @@ static int cp210x_tiocmget(struct tty_struct *tty) |((control & CONTROL_RING)? TIOCM_RI : 0) |((control & CONTROL_DCD) ? TIOCM_CD : 0); - dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control); + dev_dbg(&port->dev, "%s - control = 0x%02x\n", __func__, control); return result; } -static void cp210x_break_ctl(struct tty_struct *tty, int break_state) +static int cp210x_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); u16 state; + if (priv->partnum == CP210X_PARTNUM_CP2105) { + if (cp210x_interface_num(port->serial) == 1) + return -ENOTTY; + } + if (break_state == 0) state = BREAK_OFF; else state = BREAK_ON; + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, state == BREAK_OFF ? "off" : "on"); - cp210x_write_u16_reg(port, CP210X_SET_BREAK, state); + + return cp210x_write_u16_reg(port, CP210X_SET_BREAK, state); } #ifdef CONFIG_GPIOLIB -static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset) +static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio) { struct usb_serial *serial = gpiochip_get_data(gc); struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 req_type; + u16 mask; + int result; + int len; + + result = usb_autopm_get_interface(serial->interface); + if (result) + return result; - switch (offset) { - case 0: - if (priv->config & CP2105_GPIO0_TXLED_MODE) - return -ENODEV; + switch (priv->partnum) { + case CP210X_PARTNUM_CP2105: + req_type = REQTYPE_INTERFACE_TO_HOST; + len = 1; + break; + case CP210X_PARTNUM_CP2108: + req_type = REQTYPE_INTERFACE_TO_HOST; + len = 2; break; - case 1: - if (priv->config & (CP2105_GPIO1_RXLED_MODE | - CP2105_GPIO1_RS485_MODE)) - return -ENODEV; + default: + req_type = REQTYPE_DEVICE_TO_HOST; + len = 1; break; } - return 0; -} + mask = 0; + result = cp210x_read_vendor_block(serial, req_type, CP210X_READ_LATCH, + &mask, len); -static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct usb_serial *serial = gpiochip_get_data(gc); - int result; - u8 buf; + usb_autopm_put_interface(serial->interface); - result = cp210x_read_vendor_block(serial, REQTYPE_INTERFACE_TO_HOST, - CP210X_READ_LATCH, &buf, sizeof(buf)); if (result < 0) return result; - return !!(buf & BIT(gpio)); + le16_to_cpus(&mask); + + return !!(mask & BIT(gpio)); } -static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value) +static int cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value) { struct usb_serial *serial = gpiochip_get_data(gc); + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + struct cp210x_gpio_write16 buf16; struct cp210x_gpio_write buf; + u16 mask, state; + u16 wIndex; + int result; if (value == 1) - buf.state = BIT(gpio); + state = BIT(gpio); else - buf.state = 0; + state = 0; + + mask = BIT(gpio); - buf.mask = BIT(gpio); + result = usb_autopm_get_interface(serial->interface); + if (result) + goto out; + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2105: + buf.mask = (u8)mask; + buf.state = (u8)state; + result = cp210x_write_vendor_block(serial, + REQTYPE_HOST_TO_INTERFACE, + CP210X_WRITE_LATCH, &buf, + sizeof(buf)); + break; + case CP210X_PARTNUM_CP2108: + buf16.mask = cpu_to_le16(mask); + buf16.state = cpu_to_le16(state); + result = cp210x_write_vendor_block(serial, + REQTYPE_HOST_TO_INTERFACE, + CP210X_WRITE_LATCH, &buf16, + sizeof(buf16)); + break; + default: + wIndex = state << 8 | mask; + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, + REQTYPE_HOST_TO_DEVICE, + CP210X_WRITE_LATCH, + wIndex, + NULL, 0, USB_CTRL_SET_TIMEOUT); + break; + } - cp210x_write_vendor_block(serial, REQTYPE_HOST_TO_INTERFACE, - CP210X_WRITE_LATCH, &buf, sizeof(buf)); + usb_autopm_put_interface(serial->interface); +out: + if (result < 0) { + dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n", + result); + return result; + } + + return 0; } static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio) { - /* Hardware does not support an input mode */ - return 0; + struct usb_serial *serial = gpiochip_get_data(gc); + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + + return priv->gpio_input & BIT(gpio); } static int cp210x_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio) { - /* Hardware does not support an input mode */ - return -ENOTSUPP; + struct usb_serial *serial = gpiochip_get_data(gc); + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + + if (priv->partnum == CP210X_PARTNUM_CP2105) { + /* hardware does not support an input mode */ + return -ENOTSUPP; + } + + /* push-pull pins cannot be changed to be inputs */ + if (priv->gpio_pushpull & BIT(gpio)) + return -EINVAL; + + /* make sure to release pin if it is being driven low */ + cp210x_gpio_set(gc, gpio, 1); + + priv->gpio_input |= BIT(gpio); + + return 0; } static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio, int value) { - return 0; + struct usb_serial *serial = gpiochip_get_data(gc); + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + + priv->gpio_input &= ~BIT(gpio); + + return cp210x_gpio_set(gc, gpio, value); } static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio, @@ -1341,16 +1615,34 @@ static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio, /* Succeed only if in correct mode (this can't be set at runtime) */ if ((param == PIN_CONFIG_DRIVE_PUSH_PULL) && - (priv->gpio_mode & BIT(gpio))) + (priv->gpio_pushpull & BIT(gpio))) return 0; if ((param == PIN_CONFIG_DRIVE_OPEN_DRAIN) && - !(priv->gpio_mode & BIT(gpio))) + !(priv->gpio_pushpull & BIT(gpio))) return 0; return -ENOTSUPP; } +static int cp210x_gpio_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, unsigned int ngpios) +{ + struct usb_serial *serial = gpiochip_get_data(gc); + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + unsigned long altfunc_mask = priv->gpio_altfunc; + + bitmap_complement(valid_mask, &altfunc_mask, ngpios); + + if (bitmap_empty(valid_mask, ngpios)) + dev_dbg(dev, "no pin configured for GPIO\n"); + else + dev_dbg(dev, "GPIO.%*pbl configured for GPIO\n", ngpios, + valid_mask); + return 0; +} + /* * This function is for configuring GPIO using shared pins, where other signals * are made unavailable by configuring the use of GPIO. This is believed to be @@ -1358,12 +1650,13 @@ static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio, * this driver that provide GPIO do so in a way that does not impact other * signals and are thus expected to have very different initialisation. */ -static int cp2105_shared_gpio_init(struct usb_serial *serial) +static int cp2105_gpioconf_init(struct usb_serial *serial) { struct cp210x_serial_private *priv = usb_get_serial_data(serial); struct cp210x_pin_mode mode; - struct cp210x_config config; + struct cp210x_dual_port_config config; u8 intf_num = cp210x_interface_num(serial); + u8 iface_config; int result; result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, @@ -1380,35 +1673,298 @@ static int cp2105_shared_gpio_init(struct usb_serial *serial) /* 2 banks of GPIO - One for the pins taken from each serial port */ if (intf_num == 0) { - if (mode.eci == CP210X_PIN_MODE_MODEM) + priv->gc.ngpio = 2; + + if (mode.eci == CP210X_PIN_MODE_MODEM) { + /* mark all GPIOs of this interface as reserved */ + priv->gpio_altfunc = 0xff; return 0; + } - priv->config = config.eci_cfg; - priv->gpio_mode = (u8)((le16_to_cpu(config.gpio_mode) & + iface_config = config.eci_cfg; + priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) & CP210X_ECI_GPIO_MODE_MASK) >> CP210X_ECI_GPIO_MODE_OFFSET); - priv->gc.ngpio = 2; } else if (intf_num == 1) { - if (mode.sci == CP210X_PIN_MODE_MODEM) + priv->gc.ngpio = 3; + + if (mode.sci == CP210X_PIN_MODE_MODEM) { + /* mark all GPIOs of this interface as reserved */ + priv->gpio_altfunc = 0xff; return 0; + } - priv->config = config.sci_cfg; - priv->gpio_mode = (u8)((le16_to_cpu(config.gpio_mode) & + iface_config = config.sci_cfg; + priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) & CP210X_SCI_GPIO_MODE_MASK) >> CP210X_SCI_GPIO_MODE_OFFSET); - priv->gc.ngpio = 3; } else { return -ENODEV; } + /* mark all pins which are not in GPIO mode */ + if (iface_config & CP2105_GPIO0_TXLED_MODE) /* GPIO 0 */ + priv->gpio_altfunc |= BIT(0); + if (iface_config & (CP2105_GPIO1_RXLED_MODE | /* GPIO 1 */ + CP2105_GPIO1_RS485_MODE)) + priv->gpio_altfunc |= BIT(1); + + /* driver implementation for CP2105 only supports outputs */ + priv->gpio_input = 0; + + return 0; +} + +static int cp2104_gpioconf_init(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + struct cp210x_single_port_config config; + u8 iface_config; + u8 gpio_latch; + int result; + u8 i; + + result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PORTCONFIG, &config, + sizeof(config)); + if (result < 0) + return result; + + priv->gc.ngpio = 4; + + iface_config = config.device_cfg; + priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) & + CP210X_GPIO_MODE_MASK) >> + CP210X_GPIO_MODE_OFFSET); + gpio_latch = (u8)((le16_to_cpu(config.reset_state) & + CP210X_GPIO_MODE_MASK) >> + CP210X_GPIO_MODE_OFFSET); + + /* mark all pins which are not in GPIO mode */ + if (iface_config & CP2104_GPIO0_TXLED_MODE) /* GPIO 0 */ + priv->gpio_altfunc |= BIT(0); + if (iface_config & CP2104_GPIO1_RXLED_MODE) /* GPIO 1 */ + priv->gpio_altfunc |= BIT(1); + if (iface_config & CP2104_GPIO2_RS485_MODE) /* GPIO 2 */ + priv->gpio_altfunc |= BIT(2); + + /* + * Like CP2102N, CP2104 has also no strict input and output pin + * modes. + * Do the same input mode emulation as CP2102N. + */ + for (i = 0; i < priv->gc.ngpio; ++i) { + /* + * Set direction to "input" iff pin is open-drain and reset + * value is 1. + */ + if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i))) + priv->gpio_input |= BIT(i); + } + + return 0; +} + +static int cp2108_gpio_init(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + struct cp210x_quad_port_config config; + u16 gpio_latch; + int result; + u8 i; + + result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PORTCONFIG, &config, + sizeof(config)); + if (result < 0) + return result; + + priv->gc.ngpio = 16; + priv->gpio_pushpull = le16_to_cpu(config.reset_state.gpio_mode_pb1); + gpio_latch = le16_to_cpu(config.reset_state.gpio_latch_pb1); + + /* + * Mark all pins which are not in GPIO mode. + * + * Refer to table 9.1 "GPIO Mode alternate Functions" in the datasheet: + * https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf + * + * Alternate functions of GPIO0 to GPIO3 are determine by enhancedfxn_ifc[0] + * and the similarly for the other pins; enhancedfxn_ifc[1]: GPIO4 to GPIO7, + * enhancedfxn_ifc[2]: GPIO8 to GPIO11, enhancedfxn_ifc[3]: GPIO12 to GPIO15. + */ + for (i = 0; i < 4; i++) { + if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_TXLED) + priv->gpio_altfunc |= BIT(i * 4); + if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_RXLED) + priv->gpio_altfunc |= BIT((i * 4) + 1); + if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_RS485) + priv->gpio_altfunc |= BIT((i * 4) + 2); + if (config.enhancedfxn_ifc[i] & CP2108_EF_IFC_GPIO_CLOCK) + priv->gpio_altfunc |= BIT((i * 4) + 3); + } + + /* + * Like CP2102N, CP2108 has also no strict input and output pin + * modes. Do the same input mode emulation as CP2102N. + */ + for (i = 0; i < priv->gc.ngpio; ++i) { + /* + * Set direction to "input" iff pin is open-drain and reset + * value is 1. + */ + if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i))) + priv->gpio_input |= BIT(i); + } + + return 0; +} + +static int cp2102n_gpioconf_init(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + const u16 config_size = 0x02a6; + u8 gpio_rst_latch; + u8 config_version; + u8 gpio_pushpull; + u8 *config_buf; + u8 gpio_latch; + u8 gpio_ctrl; + int result; + u8 i; + + /* + * Retrieve device configuration from the device. + * The array received contains all customization settings done at the + * factory/manufacturer. Format of the array is documented at the + * time of writing at: + * https://www.silabs.com/community/interface/knowledge-base.entry.html/2017/03/31/cp2102n_setconfig-xsfa + */ + config_buf = kmalloc(config_size, GFP_KERNEL); + if (!config_buf) + return -ENOMEM; + + result = cp210x_read_vendor_block(serial, + REQTYPE_DEVICE_TO_HOST, + CP210X_READ_2NCONFIG, + config_buf, + config_size); + if (result < 0) { + kfree(config_buf); + return result; + } + + config_version = config_buf[CP210X_2NCONFIG_CONFIG_VERSION_IDX]; + gpio_pushpull = config_buf[CP210X_2NCONFIG_GPIO_MODE_IDX]; + gpio_ctrl = config_buf[CP210X_2NCONFIG_GPIO_CONTROL_IDX]; + gpio_rst_latch = config_buf[CP210X_2NCONFIG_GPIO_RSTLATCH_IDX]; + + kfree(config_buf); + + /* Make sure this is a config format we understand. */ + if (config_version != 0x01) + return -ENOTSUPP; + + priv->gc.ngpio = 4; + + /* + * Get default pin states after reset. Needed so we can determine + * the direction of an open-drain pin. + */ + gpio_latch = (gpio_rst_latch >> 3) & 0x0f; + + /* 0 indicates open-drain mode, 1 is push-pull */ + priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f; + + /* 0 indicates GPIO mode, 1 is alternate function */ + if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) { + /* QFN20 is special... */ + if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE) /* GPIO 0 */ + priv->gpio_altfunc |= BIT(0); + if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */ + priv->gpio_altfunc |= BIT(1); + if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */ + priv->gpio_altfunc |= BIT(2); + if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */ + priv->gpio_altfunc |= BIT(3); + } else { + priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + } + + if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) { + /* + * For the QFN28 package, GPIO4-6 are controlled by + * the low three bits of the mode/latch fields. + * Contrary to the document linked above, the bits for + * the SUSPEND pins are elsewhere. No alternate + * function is available for these pins. + */ + priv->gc.ngpio = 7; + gpio_latch |= (gpio_rst_latch & 7) << 4; + priv->gpio_pushpull |= (gpio_pushpull & 7) << 4; + } + + /* + * The CP2102N does not strictly has input and output pin modes, + * it only knows open-drain and push-pull modes which is set at + * factory. An open-drain pin can function both as an + * input or an output. We emulate input mode for open-drain pins + * by making sure they are not driven low, and we do not allow + * push-pull pins to be set as an input. + */ + for (i = 0; i < priv->gc.ngpio; ++i) { + /* + * Set direction to "input" iff pin is open-drain and reset + * value is 1. + */ + if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i))) + priv->gpio_input |= BIT(i); + } + + return 0; +} + +static int cp210x_gpio_init(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + int result; + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2104: + result = cp2104_gpioconf_init(serial); + break; + case CP210X_PARTNUM_CP2105: + result = cp2105_gpioconf_init(serial); + break; + case CP210X_PARTNUM_CP2108: + /* + * The GPIOs are not tied to any specific port so only register + * once for interface 0. + */ + if (cp210x_interface_num(serial) != 0) + return 0; + result = cp2108_gpio_init(serial); + break; + case CP210X_PARTNUM_CP2102N_QFN28: + case CP210X_PARTNUM_CP2102N_QFN24: + case CP210X_PARTNUM_CP2102N_QFN20: + result = cp2102n_gpioconf_init(serial); + break; + default: + return 0; + } + + if (result < 0) + return result; + priv->gc.label = "cp210x"; - priv->gc.request = cp210x_gpio_request; priv->gc.get_direction = cp210x_gpio_direction_get; priv->gc.direction_input = cp210x_gpio_direction_input; priv->gc.direction_output = cp210x_gpio_direction_output; priv->gc.get = cp210x_gpio_get; priv->gc.set = cp210x_gpio_set; priv->gc.set_config = cp210x_gpio_set_config; + priv->gc.init_valid_mask = cp210x_gpio_init_valid_mask; priv->gc.owner = THIS_MODULE; priv->gc.parent = &serial->interface->dev; priv->gc.base = -1; @@ -1433,7 +1989,7 @@ static void cp210x_gpio_remove(struct usb_serial *serial) #else -static int cp2105_shared_gpio_init(struct usb_serial *serial) +static int cp210x_gpio_init(struct usb_serial *serial) { return 0; } @@ -1449,35 +2005,159 @@ static int cp210x_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct cp210x_port_private *port_priv; - int ret; port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); if (!port_priv) return -ENOMEM; port_priv->bInterfaceNumber = cp210x_interface_num(serial); + mutex_init(&port_priv->mutex); usb_set_serial_port_data(port, port_priv); - ret = cp210x_detect_swapped_line_ctl(port); - if (ret) { - kfree(port_priv); - return ret; - } - return 0; } -static int cp210x_port_remove(struct usb_serial_port *port) +static void cp210x_port_remove(struct usb_serial_port *port) { struct cp210x_port_private *port_priv; port_priv = usb_get_serial_port_data(port); kfree(port_priv); +} + +static void cp210x_init_max_speed(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + bool use_actual_rate = false; + speed_t min = 300; + speed_t max; + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2101: + max = 921600; + break; + case CP210X_PARTNUM_CP2102: + case CP210X_PARTNUM_CP2103: + max = 1000000; + break; + case CP210X_PARTNUM_CP2104: + use_actual_rate = true; + max = 2000000; + break; + case CP210X_PARTNUM_CP2108: + max = 2000000; + break; + case CP210X_PARTNUM_CP2105: + if (cp210x_interface_num(serial) == 0) { + use_actual_rate = true; + max = 2000000; /* ECI */ + } else { + min = 2400; + max = 921600; /* SCI */ + } + break; + case CP210X_PARTNUM_CP2102N_QFN28: + case CP210X_PARTNUM_CP2102N_QFN24: + case CP210X_PARTNUM_CP2102N_QFN20: + use_actual_rate = true; + max = 3000000; + break; + default: + max = 2000000; + break; + } + + priv->min_speed = min; + priv->max_speed = max; + priv->use_actual_rate = use_actual_rate; +} + +static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + +static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 ver[3]; + int ret; + + ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value, + ver, sizeof(ver)); + if (ret) + return ret; + + dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__, + ver[0], ver[1], ver[2]); + + priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2]; return 0; } +static void cp210x_determine_type(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + int ret; + + ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, &priv->partnum, + sizeof(priv->partnum)); + if (ret < 0) { + dev_warn(&serial->interface->dev, + "querying part number failed\n"); + priv->partnum = CP210X_PARTNUM_UNKNOWN; + return; + } + + dev_dbg(&serial->interface->dev, "partnum = 0x%02x\n", priv->partnum); + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; + case CP210X_PARTNUM_CP2105: + case CP210X_PARTNUM_CP2108: + cp210x_get_fw_version(serial, CP210X_GET_FW_VER); + break; + case CP210X_PARTNUM_CP2102N_QFN28: + case CP210X_PARTNUM_CP2102N_QFN24: + case CP210X_PARTNUM_CP2102N_QFN20: + ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N); + if (ret) + break; + if (priv->fw_version <= 0x10004) + priv->no_flow_control = true; + break; + default: + break; + } +} + static int cp210x_attach(struct usb_serial *serial) { int result; @@ -1487,27 +2167,18 @@ static int cp210x_attach(struct usb_serial *serial) if (!priv) return -ENOMEM; - result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, - CP210X_GET_PARTNUM, &priv->partnum, - sizeof(priv->partnum)); - if (result < 0) - goto err_free_priv; - usb_set_serial_data(serial, priv); - if (priv->partnum == CP210X_PARTNUM_CP2105) { - result = cp2105_shared_gpio_init(serial); - if (result < 0) { - dev_err(&serial->interface->dev, - "GPIO initialisation failed, continuing without GPIO support\n"); - } + cp210x_determine_type(serial); + cp210x_init_max_speed(serial); + + result = cp210x_gpio_init(serial); + if (result < 0) { + dev_err(&serial->interface->dev, "GPIO initialisation failed: %d\n", + result); } return 0; -err_free_priv: - kfree(priv); - - return result; } static void cp210x_disconnect(struct usb_serial *serial) @@ -1527,4 +2198,4 @@ static void cp210x_release(struct usb_serial *serial) module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); |