summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/cp210x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r--drivers/usb/serial/cp210x.c70
1 files changed, 54 insertions, 16 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8a60c0d56863..36b25418b214 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -31,15 +31,15 @@
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
- struct ktermios *);
+ const struct ktermios *);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
- struct ktermios*);
+ const struct ktermios *);
static bool cp210x_tx_empty(struct usb_serial_port *port);
static int cp210x_tiocmget(struct tty_struct *);
static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int, unsigned int);
-static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_attach(struct usb_serial *);
static void cp210x_disconnect(struct usb_serial *);
static void cp210x_release(struct usb_serial *);
@@ -51,14 +51,18 @@ static void cp210x_enable_event_mode(struct usb_serial_port *port);
static void cp210x_disable_event_mode(struct usb_serial_port *port);
static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x0404, 0x034C) }, /* NCR Retail IO Box */
{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x04BF, 0x1301) }, /* TDK Corporation NC0110013M - Network Controller */
+ { USB_DEVICE(0x04BF, 0x1303) }, /* TDK Corporation MM0110113M - i3 Micro Module */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+ { USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */
{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
{ USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */
{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
@@ -68,6 +72,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
+ { USB_DEVICE(0x106F, 0x0003) }, /* CPI / Money Controls Bulk Coin Recycler */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
@@ -117,6 +122,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */
{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
@@ -128,6 +134,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+ { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
@@ -139,8 +146,10 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
+ { USB_DEVICE(0x10C4, 0x863C) }, /* MGP Instruments PDS100 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x87ED) }, /* IMST USB-Stick for Smart Meter */
{ USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
{ USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
@@ -171,6 +180,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+ { USB_DEVICE(0x11CA, 0x0212) }, /* Verifone USB to Printer (UART, CP2102) */
{ USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
@@ -192,6 +202,10 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+ { USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */
+ { USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */
+ { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
+ { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
@@ -209,6 +223,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1B93, 0x1013) }, /* Phoenix Contact UPS Device */
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
@@ -285,7 +300,6 @@ struct cp210x_port_private {
static struct usb_serial_driver cp210x_device = {
.driver = {
- .owner = THIS_MODULE,
.name = "cp210x",
},
.id_table = id_table,
@@ -1035,17 +1049,19 @@ static speed_t cp210x_get_actual_rate(speed_t baud)
* otherwise.
*/
static void cp210x_change_speed(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+ struct usb_serial_port *port,
+ const struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
u32 baud;
+ if (tty->termios.c_ospeed == 0)
+ return;
+
/*
* This maps the requested rate to the actual rate, a valid rate on
* cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
- *
- * NOTE: B0 is not implemented.
*/
baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
@@ -1117,7 +1133,8 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio
}
static void cp210x_set_flow_control(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+ struct usb_serial_port *port,
+ const struct ktermios *old_termios)
{
struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
@@ -1137,7 +1154,8 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
tty->termios.c_iflag &= ~(IXON | IXOFF);
}
- if (old_termios &&
+ if (tty->termios.c_ospeed != 0 &&
+ old_termios && old_termios->c_ospeed != 0 &&
C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) &&
I_IXON(tty) == (old_termios->c_iflag & IXON) &&
I_IXOFF(tty) == (old_termios->c_iflag & IXOFF) &&
@@ -1162,6 +1180,14 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
mutex_lock(&port_priv->mutex);
+ if (tty->termios.c_ospeed == 0) {
+ port_priv->dtr = false;
+ port_priv->rts = false;
+ } else if (old_termios && old_termios->c_ospeed == 0) {
+ port_priv->dtr = true;
+ port_priv->rts = true;
+ }
+
ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
sizeof(flow_ctl));
if (ret)
@@ -1227,13 +1253,15 @@ out_unlock:
}
static void cp210x_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+ struct usb_serial_port *port,
+ const struct ktermios *old_termios)
{
struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
u16 bits;
int ret;
- if (old_termios && !cp210x_termios_change(&tty->termios, old_termios))
+ if (old_termios && !cp210x_termios_change(&tty->termios, old_termios) &&
+ tty->termios.c_ospeed != 0)
return;
if (!old_termios || tty->termios.c_ospeed != old_termios->c_ospeed)
@@ -1411,18 +1439,26 @@ static int cp210x_tiocmget(struct tty_struct *tty)
return result;
}
-static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
+static int cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
+ struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
u16 state;
+ if (priv->partnum == CP210X_PARTNUM_CP2105) {
+ if (cp210x_interface_num(port->serial) == 1)
+ return -ENOTTY;
+ }
+
if (break_state == 0)
state = BREAK_OFF;
else
state = BREAK_ON;
+
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
- cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
+
+ return cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
}
#ifdef CONFIG_GPIOLIB
@@ -1468,7 +1504,7 @@ static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
return !!(mask & BIT(gpio));
}
-static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static int cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct usb_serial *serial = gpiochip_get_data(gc);
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
@@ -1523,7 +1559,10 @@ out:
if (result < 0) {
dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
result);
+ return result;
}
+
+ return 0;
}
static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
@@ -1563,9 +1602,8 @@ static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
struct cp210x_serial_private *priv = usb_get_serial_data(serial);
priv->gpio_input &= ~BIT(gpio);
- cp210x_gpio_set(gc, gpio, value);
- return 0;
+ return cp210x_gpio_set(gc, gpio, value);
}
static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio,
generated by cgit (git 2.34.1) at 2025-12-25 20:08:28 +0000