diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.h')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.h | 55 |
1 files changed, 35 insertions, 20 deletions
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index bbcc13df11ac..55ea61264f91 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) @@ -34,13 +35,16 @@ #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ -#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ +#define FTDI_SIO_GET_LATENCY_TIMER 0x0a /* Get the latency timer */ +#define FTDI_SIO_SET_BITMODE 0x0b /* Set bitbang mode */ +#define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */ +#define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */ -/* Interface indices for FT2232, FT2232H and FT4232H devices */ -#define INTERFACE_A 1 -#define INTERFACE_B 2 -#define INTERFACE_C 3 -#define INTERFACE_D 4 +/* Channel indices for FT2232, FT2232H and FT4232H devices */ +#define CHANNEL_A 1 +#define CHANNEL_B 2 +#define CHANNEL_C 3 +#define CHANNEL_D 4 /* @@ -149,18 +153,6 @@ * not supported by the FT8U232AM). */ -enum ftdi_chip_type { - SIO = 1, - FT8U232AM = 2, - FT232BM = 3, - FT2232C = 4, - FT232RL = 5, - FT2232H = 6, - FT4232H = 7, - FT232H = 8, - FTX = 9, -}; - enum ftdi_sio_baudrate { ftdi_sio_b300 = 0, ftdi_sio_b600 = 1, @@ -298,7 +290,7 @@ enum ftdi_sio_baudrate { /* * FTDI_SIO_GET_LATENCY_TIMER * - * Set the timeout interval. The FTDI collects data from the slave + * Set the timeout interval. The FTDI collects data from the * device, transmitting it to the host when either A) 62 bytes are * received, or B) the timeout interval has elapsed and the buffer * contains at least 1 byte. Setting this value to a small number @@ -320,7 +312,7 @@ enum ftdi_sio_baudrate { /* * FTDI_SIO_SET_LATENCY_TIMER * - * Set the timeout interval. The FTDI collects data from the slave + * Set the timeout interval. The FTDI collects data from the * device, transmitting it to the host when either A) 62 bytes are * received, or B) the timeout interval has elapsed and the buffer * contains at least 1 byte. Setting this value to a small number @@ -432,6 +424,29 @@ enum ftdi_sio_baudrate { * 1 = active */ +/* FTDI_SIO_SET_BITMODE */ +#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE + +/* Possible bitmodes for FTDI_SIO_SET_BITMODE_REQUEST */ +#define FTDI_SIO_BITMODE_RESET 0x00 +#define FTDI_SIO_BITMODE_CBUS 0x20 + +/* FTDI_SIO_READ_PINS */ +#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xc0 +#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS + +/* + * FTDI_SIO_READ_EEPROM + * + * EEPROM format found in FTDI AN_201, "FT-X MTP memory Configuration", + * http://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf + */ +#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0 +#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM + +#define FTDI_FTX_CBUS_MUX_GPIO 0x8 +#define FTDI_FT232R_CBUS_MUX_GPIO 0xa /* Descriptors returned by the device |