diff options
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 500 |
1 files changed, 392 insertions, 108 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c9ebefd8f35f..22579d0d8ab8 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Prolific PL2303 USB to serial adaptor driver * @@ -6,11 +7,7 @@ * * Original driver for 2.2.x by anonymous * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ @@ -27,13 +24,14 @@ #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "pl2303.h" #define PL2303_QUIRK_UART_STATE_IDX0 BIT(0) #define PL2303_QUIRK_LEGACY BIT(1) #define PL2303_QUIRK_ENDPOINT_HACK BIT(2) +#define PL2303_QUIRK_NO_BREAK_GETLINE BIT(3) static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID), @@ -41,6 +39,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, @@ -48,10 +47,21 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GC) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GB) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GT) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GL) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GE) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GS) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID), .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, @@ -89,15 +99,27 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM930_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, + { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) }, { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, + { USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_PRODUCT_ID) }, + { USB_DEVICE(MACROSILICON_VENDOR_ID, MACROSILICON_MS3020_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -121,9 +143,11 @@ MODULE_DEVICE_TABLE(usb, id_table); #define VENDOR_WRITE_REQUEST_TYPE 0x40 #define VENDOR_WRITE_REQUEST 0x01 +#define VENDOR_WRITE_NREQUEST 0x80 #define VENDOR_READ_REQUEST_TYPE 0xc0 #define VENDOR_READ_REQUEST 0x01 +#define VENDOR_READ_NREQUEST 0x81 #define UART_STATE_INDEX 8 #define UART_STATE_MSR_MASK 0x8b @@ -137,17 +161,39 @@ MODULE_DEVICE_TABLE(usb, id_table); #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 -static void pl2303_set_break(struct usb_serial_port *port, bool enable); +#define PL2303_FLOWCTRL_MASK 0xf0 + +#define PL2303_READ_TYPE_HX_STATUS 0x8080 + +#define PL2303_HXN_RESET_REG 0x07 +#define PL2303_HXN_RESET_UPSTREAM_PIPE 0x02 +#define PL2303_HXN_RESET_DOWNSTREAM_PIPE 0x01 + +#define PL2303_HXN_FLOWCTRL_REG 0x0a +#define PL2303_HXN_FLOWCTRL_MASK 0x1c +#define PL2303_HXN_FLOWCTRL_NONE 0x1c +#define PL2303_HXN_FLOWCTRL_RTS_CTS 0x18 +#define PL2303_HXN_FLOWCTRL_XON_XOFF 0x0c + +static int pl2303_set_break(struct usb_serial_port *port, bool enable); enum pl2303_type { - TYPE_01, /* Type 0 and 1 (difference unknown) */ - TYPE_HX, /* HX version of the pl2303 chip */ + TYPE_H, + TYPE_HX, + TYPE_TA, + TYPE_TB, + TYPE_HXD, + TYPE_HXN, TYPE_COUNT }; struct pl2303_type_data { + const char *name; speed_t max_baud_rate; unsigned long quirks; + unsigned int no_autoxonxoff:1; + unsigned int no_divisors:1; + unsigned int alt_divisors:1; }; struct pl2303_serial_private { @@ -164,23 +210,52 @@ struct pl2303_private { }; static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = { - [TYPE_01] = { - .max_baud_rate = 1228800, - .quirks = PL2303_QUIRK_LEGACY, + [TYPE_H] = { + .name = "H", + .max_baud_rate = 1228800, + .quirks = PL2303_QUIRK_LEGACY, + .no_autoxonxoff = true, }, [TYPE_HX] = { - .max_baud_rate = 12000000, + .name = "HX", + .max_baud_rate = 6000000, + }, + [TYPE_TA] = { + .name = "TA", + .max_baud_rate = 6000000, + .alt_divisors = true, + }, + [TYPE_TB] = { + .name = "TB", + .max_baud_rate = 12000000, + .alt_divisors = true, + }, + [TYPE_HXD] = { + .name = "HXD", + .max_baud_rate = 12000000, + }, + [TYPE_HXN] = { + .name = "G", + .max_baud_rate = 12000000, + .no_divisors = true, }, }; static int pl2303_vendor_read(struct usb_serial *serial, u16 value, unsigned char buf[1]) { + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); struct device *dev = &serial->interface->dev; + u8 request; int res; + if (spriv->type == &pl2303_type_data[TYPE_HXN]) + request = VENDOR_READ_NREQUEST; + else + request = VENDOR_READ_REQUEST; + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, + request, VENDOR_READ_REQUEST_TYPE, value, 0, buf, 1, 100); if (res != 1) { dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__, @@ -198,13 +273,20 @@ static int pl2303_vendor_read(struct usb_serial *serial, u16 value, static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index) { + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); struct device *dev = &serial->interface->dev; + u8 request; int res; dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index); + if (spriv->type == &pl2303_type_data[TYPE_HXN]) + request = VENDOR_WRITE_NREQUEST; + else + request = VENDOR_WRITE_REQUEST; + res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, + request, VENDOR_WRITE_REQUEST_TYPE, value, index, NULL, 0, 100); if (res) { dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__, @@ -215,6 +297,34 @@ static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index) return 0; } +static int pl2303_update_reg(struct usb_serial *serial, u8 reg, u8 mask, u8 val) +{ + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int ret = 0; + u8 *buf; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (spriv->type == &pl2303_type_data[TYPE_HXN]) + ret = pl2303_vendor_read(serial, reg, buf); + else + ret = pl2303_vendor_read(serial, reg | 0x80, buf); + + if (ret) + goto out_free; + + *buf &= ~mask; + *buf |= val & mask; + + ret = pl2303_vendor_write(serial, reg, *buf); +out_free: + kfree(buf); + + return ret; +} + static int pl2303_probe(struct usb_serial *serial, const struct usb_device_id *id) { @@ -279,54 +389,157 @@ static int pl2303_calc_num_ports(struct usb_serial *serial, return 1; } +static bool pl2303_supports_hx_status(struct usb_serial *serial) +{ + int ret; + u8 buf; + + ret = usb_control_msg_recv(serial->dev, 0, VENDOR_READ_REQUEST, + VENDOR_READ_REQUEST_TYPE, PL2303_READ_TYPE_HX_STATUS, + 0, &buf, 1, 100, GFP_KERNEL); + + return ret == 0; +} + +static int pl2303_detect_type(struct usb_serial *serial) +{ + struct usb_device_descriptor *desc = &serial->dev->descriptor; + u16 bcdDevice, bcdUSB; + + /* + * Legacy PL2303H, variants 0 and 1 (difference unknown). + */ + if (desc->bDeviceClass == 0x02) + return TYPE_H; /* variant 0 */ + + if (desc->bMaxPacketSize0 != 0x40) { + if (desc->bDeviceClass == 0x00 || desc->bDeviceClass == 0xff) + return TYPE_H; /* variant 1 */ + + return TYPE_H; /* variant 0 */ + } + + bcdDevice = le16_to_cpu(desc->bcdDevice); + bcdUSB = le16_to_cpu(desc->bcdUSB); + + switch (bcdUSB) { + case 0x101: + /* USB 1.0.1? Let's assume they meant 1.1... */ + fallthrough; + case 0x110: + switch (bcdDevice) { + case 0x300: + return TYPE_HX; + case 0x400: + return TYPE_HXD; + default: + return TYPE_HX; + } + break; + case 0x200: + switch (bcdDevice) { + case 0x100: /* GC */ + case 0x105: + return TYPE_HXN; + case 0x300: /* GT / TA */ + if (pl2303_supports_hx_status(serial)) + return TYPE_TA; + fallthrough; + case 0x305: + case 0x400: /* GL */ + case 0x405: + return TYPE_HXN; + case 0x500: /* GE / TB */ + if (pl2303_supports_hx_status(serial)) + return TYPE_TB; + fallthrough; + case 0x505: + case 0x600: /* GS */ + case 0x605: + case 0x700: /* GR */ + case 0x705: + case 0x905: /* GT-2AB */ + case 0x1005: /* GC-Q20 */ + return TYPE_HXN; + } + break; + } + + dev_err(&serial->interface->dev, + "unknown device type, please report to linux-usb@vger.kernel.org\n"); + return -ENODEV; +} + +static bool pl2303_is_hxd_clone(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + unsigned char *buf; + int ret; + + buf = kmalloc(7, GFP_KERNEL); + if (!buf) + return false; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + + kfree(buf); + + return ret == -EPIPE; +} + static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; - enum pl2303_type type = TYPE_01; + enum pl2303_type type; unsigned char *buf; + int ret; + + ret = pl2303_detect_type(serial); + if (ret < 0) + return ret; + + type = ret; + dev_dbg(&serial->interface->dev, "device type: %s\n", pl2303_type_data[type].name); spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; - buf = kmalloc(1, GFP_KERNEL); - if (!buf) { - kfree(spriv); - return -ENOMEM; - } - - if (serial->dev->descriptor.bDeviceClass == 0x02) - type = TYPE_01; /* type 0 */ - else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) - type = TYPE_HX; - else if (serial->dev->descriptor.bDeviceClass == 0x00) - type = TYPE_01; /* type 1 */ - else if (serial->dev->descriptor.bDeviceClass == 0xFF) - type = TYPE_01; /* type 1 */ - dev_dbg(&serial->interface->dev, "device type: %d\n", type); - spriv->type = &pl2303_type_data[type]; spriv->quirks = (unsigned long)usb_get_serial_data(serial); spriv->quirks |= spriv->type->quirks; + if (type == TYPE_HXD && pl2303_is_hxd_clone(serial)) + spriv->quirks |= PL2303_QUIRK_NO_BREAK_GETLINE; + usb_set_serial_data(serial, spriv); - pl2303_vendor_read(serial, 0x8484, buf); - pl2303_vendor_write(serial, 0x0404, 0); - pl2303_vendor_read(serial, 0x8484, buf); - pl2303_vendor_read(serial, 0x8383, buf); - pl2303_vendor_read(serial, 0x8484, buf); - pl2303_vendor_write(serial, 0x0404, 1); - pl2303_vendor_read(serial, 0x8484, buf); - pl2303_vendor_read(serial, 0x8383, buf); - pl2303_vendor_write(serial, 0, 1); - pl2303_vendor_write(serial, 1, 0); - if (spriv->quirks & PL2303_QUIRK_LEGACY) - pl2303_vendor_write(serial, 2, 0x24); - else - pl2303_vendor_write(serial, 2, 0x44); + if (type != TYPE_HXN) { + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + kfree(spriv); + return -ENOMEM; + } - kfree(buf); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_write(serial, 0x0404, 0); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_read(serial, 0x8383, buf); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_write(serial, 0x0404, 1); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_read(serial, 0x8383, buf); + pl2303_vendor_write(serial, 0, 1); + pl2303_vendor_write(serial, 1, 0); + if (spriv->quirks & PL2303_QUIRK_LEGACY) + pl2303_vendor_write(serial, 2, 0x24); + else + pl2303_vendor_write(serial, 2, 0x44); + + kfree(buf); + } return 0; } @@ -355,13 +568,11 @@ static int pl2303_port_probe(struct usb_serial_port *port) return 0; } -static int pl2303_port_remove(struct usb_serial_port *port) +static void pl2303_port_remove(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); kfree(priv); - - return 0; } static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) @@ -460,6 +671,45 @@ static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4], return baud; } +static speed_t pl2303_encode_baud_rate_divisor_alt(unsigned char buf[4], + speed_t baud) +{ + unsigned int baseline, mantissa, exponent; + + /* + * Apparently, for the TA version the formula is: + * baudrate = 12M * 32 / (mantissa * 2^exponent) + * where + * mantissa = buf[10:0] + * exponent = buf[15:13 16] + */ + baseline = 12000000 * 32; + mantissa = baseline / baud; + if (mantissa == 0) + mantissa = 1; /* Avoid dividing by zero if baud > 32*12M. */ + exponent = 0; + while (mantissa >= 2048) { + if (exponent < 15) { + mantissa >>= 1; /* divide by 2 */ + exponent++; + } else { + /* Exponent is maxed. Trim mantissa and leave. */ + mantissa = 2047; + break; + } + } + + buf[3] = 0x80; + buf[2] = exponent & 0x01; + buf[1] = (exponent & ~0x01) << 4 | mantissa >> 8; + buf[0] = mantissa & 0xff; + + /* Calculate and return the exact baud rate. */ + baud = (baseline / mantissa) >> exponent; + + return baud; +} + static void pl2303_encode_baud_rate(struct tty_struct *tty, struct usb_serial_port *port, u8 buf[4]) @@ -478,11 +728,17 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty, baud = min_t(speed_t, baud, spriv->type->max_baud_rate); /* * Use direct method for supported baud rates, otherwise use divisors. + * Newer chip types do not support divisor encoding. */ - baud_sup = pl2303_get_supported_baud_rate(baud); + if (spriv->type->no_divisors) + baud_sup = baud; + else + baud_sup = pl2303_get_supported_baud_rate(baud); if (baud == baud_sup) baud = pl2303_encode_baud_rate_direct(buf, baud); + else if (spriv->type->alt_divisors) + baud = pl2303_encode_baud_rate_divisor_alt(buf, baud); else baud = pl2303_encode_baud_rate_divisor(buf, baud); @@ -494,9 +750,18 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty, static int pl2303_get_line_request(struct usb_serial_port *port, unsigned char buf[7]) { - struct usb_device *udev = port->serial->dev; + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct usb_device *udev = serial->dev; int ret; + if (spriv->quirks & PL2303_QUIRK_NO_BREAK_GETLINE) { + struct pl2303_private *priv = usb_get_serial_port_data(port); + + memcpy(buf, priv->line_settings, 7); + return 0; + } + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); @@ -533,8 +798,34 @@ static int pl2303_set_line_request(struct usb_serial_port *port, return 0; } +static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b) +{ + bool ixon_change; + + ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) || + a->c_cc[VSTART] != b->c_cc[VSTART] || + a->c_cc[VSTOP] != b->c_cc[VSTOP]; + + return tty_termios_hw_change(a, b) || ixon_change; +} + +static bool pl2303_enable_xonxoff(struct tty_struct *tty, const struct pl2303_type_data *type) +{ + if (!I_IXON(tty) || I_IXANY(tty)) + return false; + + if (START_CHAR(tty) != 0x11 || STOP_CHAR(tty) != 0x13) + return false; + + if (type->no_autoxonxoff) + return false; + + return true; +} + static void pl2303_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) + struct usb_serial_port *port, + const struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct pl2303_serial_private *spriv = usb_get_serial_data(serial); @@ -544,7 +835,7 @@ static void pl2303_set_termios(struct tty_struct *tty, int ret; u8 control; - if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !pl2303_termios_change(&tty->termios, old_termios)) return; buf = kzalloc(7, GFP_KERNEL); @@ -557,20 +848,7 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_get_line_request(port, buf); - switch (C_CSIZE(tty)) { - case CS5: - buf[6] = 5; - break; - case CS6: - buf[6] = 6; - break; - case CS7: - buf[6] = 7; - break; - default: - case CS8: - buf[6] = 8; - } + buf[6] = tty_get_char_size(tty->termios.c_cflag); dev_dbg(&port->dev, "data bits = %d\n", buf[6]); /* For reference buf[0]:buf[3] baud rate value */ @@ -658,12 +936,31 @@ static void pl2303_set_termios(struct tty_struct *tty, } if (C_CRTSCTS(tty)) { - if (spriv->quirks & PL2303_QUIRK_LEGACY) - pl2303_vendor_write(serial, 0x0, 0x41); - else - pl2303_vendor_write(serial, 0x0, 0x61); + if (spriv->quirks & PL2303_QUIRK_LEGACY) { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x40); + } else if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG, + PL2303_HXN_FLOWCTRL_MASK, + PL2303_HXN_FLOWCTRL_RTS_CTS); + } else { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x60); + } + } else if (pl2303_enable_xonxoff(tty, spriv->type)) { + if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG, + PL2303_HXN_FLOWCTRL_MASK, + PL2303_HXN_FLOWCTRL_XON_XOFF); + } else { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0xc0); + } } else { - pl2303_vendor_write(serial, 0x0, 0x0); + if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG, + PL2303_HXN_FLOWCTRL_MASK, + PL2303_HXN_FLOWCTRL_NONE); + } else { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0); + } } kfree(buf); @@ -704,8 +1001,14 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(serial->dev, port->read_urb->pipe); } else { /* reset upstream data pipes */ - pl2303_vendor_write(serial, 8, 0); - pl2303_vendor_write(serial, 9, 0); + if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_vendor_write(serial, PL2303_HXN_RESET_REG, + PL2303_HXN_RESET_UPSTREAM_PIPE | + PL2303_HXN_RESET_DOWNSTREAM_PIPE); + } else { + pl2303_vendor_write(serial, 8, 0); + pl2303_vendor_write(serial, 9, 0); + } } /* Setup termios */ @@ -792,37 +1095,16 @@ static int pl2303_carrier_raised(struct usb_serial_port *port) return 0; } -static int pl2303_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct serial_struct ser; - struct usb_serial_port *port = tty->driver_data; - - switch (cmd) { - case TIOCGSERIAL: - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; - ser.line = port->minor; - ser.port = port->port_number; - ser.baud_base = 460800; - - if (copy_to_user((void __user *)arg, &ser, sizeof ser)) - return -EFAULT; - - return 0; - default: - break; - } - - return -ENOIOCTLCMD; -} - -static void pl2303_set_break(struct usb_serial_port *port, bool enable) +static int pl2303_set_break(struct usb_serial_port *port, bool enable) { struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); u16 state; int result; + if (spriv->quirks & PL2303_QUIRK_NO_BREAK_GETLINE) + return -ENOTTY; + if (enable) state = BREAK_ON; else @@ -834,15 +1116,19 @@ static void pl2303_set_break(struct usb_serial_port *port, bool enable) result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); - if (result) + if (result) { dev_err(&port->dev, "error sending break = %d\n", result); + return result; + } + + return 0; } -static void pl2303_break_ctl(struct tty_struct *tty, int state) +static int pl2303_break_ctl(struct tty_struct *tty, int state) { struct usb_serial_port *port = tty->driver_data; - pl2303_set_break(port, state); + return pl2303_set_break(port, state); } static void pl2303_update_line_status(struct usb_serial_port *port, @@ -972,7 +1258,7 @@ static void pl2303_process_read_urb(struct urb *urb) if (line_status & UART_OVERRUN_ERROR) tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); - if (port->port.console && port->sysrq) { + if (port->sysrq) { for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(port, data[i])) tty_insert_flip_char(&port->port, data[i], @@ -987,7 +1273,6 @@ static void pl2303_process_read_urb(struct urb *urb) static struct usb_serial_driver pl2303_device = { .driver = { - .owner = THIS_MODULE, .name = "pl2303", }, .id_table = id_table, @@ -1000,7 +1285,6 @@ static struct usb_serial_driver pl2303_device = { .close = pl2303_close, .dtr_rts = pl2303_dtr_rts, .carrier_raised = pl2303_carrier_raised, - .ioctl = pl2303_ioctl, .break_ctl = pl2303_break_ctl, .set_termios = pl2303_set_termios, .tiocmget = pl2303_tiocmget, @@ -1023,4 +1307,4 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); |