diff options
Diffstat (limited to 'drivers/video/backlight/ili922x.c')
| -rw-r--r-- | drivers/video/backlight/ili922x.c | 28 |
1 files changed, 17 insertions, 11 deletions
diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c index 9c5aa3fbb284..5e1bf0c5831f 100644 --- a/drivers/video/backlight/ili922x.c +++ b/drivers/video/backlight/ili922x.c @@ -8,7 +8,6 @@ * memory is cyclically updated over the RGB interface. */ -#include <linux/fb.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/init.h> @@ -81,7 +80,7 @@ #define START_RW_WRITE 0 #define START_RW_READ 1 -/** +/* * START_BYTE(id, rs, rw) * * Set the start byte according to the required operation. @@ -100,13 +99,15 @@ #define START_BYTE(id, rs, rw) \ (0x70 | (((id) & 0x01) << 2) | (((rs) & 0x01) << 1) | ((rw) & 0x01)) -/** +/* * CHECK_FREQ_REG(spi_device s, spi_transfer x) - Check the frequency * for the SPI transfer. According to the datasheet, the controller * accept higher frequency for the GRAM transfer, but it requires * lower frequency when the registers are read/written. * The macro sets the frequency in the spi_transfer structure if * the frequency exceeds the maximum value. + * @s: pointer to an SPI device + * @x: pointer to the read/write buffer pair */ #define CHECK_FREQ_REG(s, x) \ do { \ @@ -117,11 +118,11 @@ #define CMD_BUFSIZE 16 -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) #define set_tx_byte(b) (tx_invert ? ~(b) : b) -/** +/* * ili922x_id - id as set by manufacturer */ static int ili922x_id = 1; @@ -130,7 +131,7 @@ module_param(ili922x_id, int, 0); static int tx_invert; module_param(tx_invert, int, 0); -/** +/* * driver's private structure */ struct ili922x { @@ -267,6 +268,10 @@ static int ili922x_write(struct spi_device *spi, u8 reg, u16 value) spi_message_add_tail(&xfer_regindex, &msg); ret = spi_sync(spi, &msg); + if (ret < 0) { + dev_err(&spi->dev, "Error sending SPI message 0x%x", ret); + return ret; + } spi_message_init(&msg); tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG, @@ -293,6 +298,8 @@ static int ili922x_write(struct spi_device *spi, u8 reg, u16 value) #ifdef DEBUG /** * ili922x_reg_dump - dump all registers + * + * @spi: pointer to an SPI device */ static void ili922x_reg_dump(struct spi_device *spi) { @@ -464,7 +471,7 @@ static int ili922x_get_power(struct lcd_device *ld) return ili->power; } -static struct lcd_ops ili922x_ops = { +static const struct lcd_ops ili922x_ops = { .get_power = ili922x_get_power, .set_power = ili922x_set_power, }; @@ -505,7 +512,7 @@ static int ili922x_probe(struct spi_device *spi) ili922x_display_init(spi); - ili->power = FB_BLANK_POWERDOWN; + ili->power = LCD_POWER_OFF; lcd = devm_lcd_device_register(&spi->dev, "ili922xlcd", &spi->dev, ili, &ili922x_ops); @@ -517,15 +524,14 @@ static int ili922x_probe(struct spi_device *spi) ili->ld = lcd; spi_set_drvdata(spi, ili); - ili922x_lcd_power(ili, FB_BLANK_UNBLANK); + ili922x_lcd_power(ili, LCD_POWER_ON); return 0; } -static int ili922x_remove(struct spi_device *spi) +static void ili922x_remove(struct spi_device *spi) { ili922x_poweroff(spi); - return 0; } static struct spi_driver ili922x_driver = { |