diff options
Diffstat (limited to 'drivers/video/backlight/ili922x.c')
| -rw-r--r-- | drivers/video/backlight/ili922x.c | 17 |
1 files changed, 10 insertions, 7 deletions
diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c index e7b6bd827986..5e1bf0c5831f 100644 --- a/drivers/video/backlight/ili922x.c +++ b/drivers/video/backlight/ili922x.c @@ -8,7 +8,6 @@ * memory is cyclically updated over the RGB interface. */ -#include <linux/fb.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/init.h> @@ -81,7 +80,7 @@ #define START_RW_WRITE 0 #define START_RW_READ 1 -/** +/* * START_BYTE(id, rs, rw) * * Set the start byte according to the required operation. @@ -100,7 +99,7 @@ #define START_BYTE(id, rs, rw) \ (0x70 | (((id) & 0x01) << 2) | (((rs) & 0x01) << 1) | ((rw) & 0x01)) -/** +/* * CHECK_FREQ_REG(spi_device s, spi_transfer x) - Check the frequency * for the SPI transfer. According to the datasheet, the controller * accept higher frequency for the GRAM transfer, but it requires @@ -119,7 +118,7 @@ #define CMD_BUFSIZE 16 -#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) +#define POWER_IS_ON(pwr) ((pwr) <= LCD_POWER_REDUCED) #define set_tx_byte(b) (tx_invert ? ~(b) : b) @@ -269,6 +268,10 @@ static int ili922x_write(struct spi_device *spi, u8 reg, u16 value) spi_message_add_tail(&xfer_regindex, &msg); ret = spi_sync(spi, &msg); + if (ret < 0) { + dev_err(&spi->dev, "Error sending SPI message 0x%x", ret); + return ret; + } spi_message_init(&msg); tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG, @@ -468,7 +471,7 @@ static int ili922x_get_power(struct lcd_device *ld) return ili->power; } -static struct lcd_ops ili922x_ops = { +static const struct lcd_ops ili922x_ops = { .get_power = ili922x_get_power, .set_power = ili922x_set_power, }; @@ -509,7 +512,7 @@ static int ili922x_probe(struct spi_device *spi) ili922x_display_init(spi); - ili->power = FB_BLANK_POWERDOWN; + ili->power = LCD_POWER_OFF; lcd = devm_lcd_device_register(&spi->dev, "ili922xlcd", &spi->dev, ili, &ili922x_ops); @@ -521,7 +524,7 @@ static int ili922x_probe(struct spi_device *spi) ili->ld = lcd; spi_set_drvdata(spi, ili); - ili922x_lcd_power(ili, FB_BLANK_UNBLANK); + ili922x_lcd_power(ili, LCD_POWER_ON); return 0; } |