diff options
Diffstat (limited to 'drivers/video/backlight/qcom-wled.c')
| -rw-r--r-- | drivers/video/backlight/qcom-wled.c | 203 |
1 files changed, 110 insertions, 93 deletions
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 4c8c34b99441..a63bb42c8f8b 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -9,8 +9,8 @@ #include <linux/backlight.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/of_address.h> +#include <linux/platform_device.h> #include <linux/regmap.h> /* From DT binding */ @@ -231,14 +231,14 @@ struct wled { static int wled3_set_brightness(struct wled *wled, u16 brightness) { int rc, i; - u8 v[2]; + __le16 v; - v[0] = brightness & 0xff; - v[1] = (brightness >> 8) & 0xf; + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX); - for (i = 0; i < wled->cfg.num_strings; ++i) { + for (i = 0; i < wled->cfg.num_strings; ++i) { rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr + - WLED3_SINK_REG_BRIGHT(i), v, 2); + WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), + &v, sizeof(v)); if (rc < 0) return rc; } @@ -250,18 +250,18 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness) { int rc, i; u16 low_limit = wled->max_brightness * 4 / 1000; - u8 v[2]; + __le16 v; /* WLED4's lower limit of operation is 0.4% */ if (brightness > 0 && brightness < low_limit) brightness = low_limit; - v[0] = brightness & 0xff; - v[1] = (brightness >> 8) & 0xf; + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX); - for (i = 0; i < wled->cfg.num_strings; ++i) { + for (i = 0; i < wled->cfg.num_strings; ++i) { rc = regmap_bulk_write(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_BRIGHT(i), v, 2); + WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), + &v, sizeof(v)); if (rc < 0) return rc; } @@ -273,21 +273,20 @@ static int wled5_set_brightness(struct wled *wled, u16 brightness) { int rc, offset; u16 low_limit = wled->max_brightness * 1 / 1000; - u8 v[2]; + __le16 v; /* WLED5's lower limit is 0.1% */ if (brightness < low_limit) brightness = low_limit; - v[0] = brightness & 0xff; - v[1] = (brightness >> 8) & 0x7f; + v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B); offset = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB : WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB; rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset, - v, 2); + &v, sizeof(v)); return rc; } @@ -336,34 +335,34 @@ static int wled3_sync_toggle(struct wled *wled) unsigned int mask = GENMASK(wled->max_string_count - 1, 0); rc = regmap_update_bits(wled->regmap, - wled->ctrl_addr + WLED3_SINK_REG_SYNC, - mask, mask); + wled->sink_addr + WLED3_SINK_REG_SYNC, + mask, WLED3_SINK_REG_SYNC_CLEAR); if (rc < 0) return rc; rc = regmap_update_bits(wled->regmap, - wled->ctrl_addr + WLED3_SINK_REG_SYNC, - mask, WLED3_SINK_REG_SYNC_CLEAR); + wled->sink_addr + WLED3_SINK_REG_SYNC, + mask, mask); return rc; } -static int wled5_sync_toggle(struct wled *wled) +static int wled5_mod_sync_toggle(struct wled *wled) { int rc; u8 val; - val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : - WLED5_SINK_REG_SYNC_MOD_B_BIT; rc = regmap_update_bits(wled->regmap, wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, - WLED5_SINK_REG_SYNC_MASK, val); + WLED5_SINK_REG_SYNC_MASK, 0); if (rc < 0) return rc; + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : + WLED5_SINK_REG_SYNC_MOD_B_BIT; return regmap_update_bits(wled->regmap, wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, - WLED5_SINK_REG_SYNC_MASK, 0); + WLED5_SINK_REG_SYNC_MASK, val); } static int wled_ovp_fault_status(struct wled *wled, bool *fault_set) @@ -433,14 +432,9 @@ static int wled5_ovp_delay(struct wled *wled) static int wled_update_status(struct backlight_device *bl) { struct wled *wled = bl_get_data(bl); - u16 brightness = bl->props.brightness; + u16 brightness = backlight_get_brightness(bl); int rc = 0; - if (bl->props.power != FB_BLANK_UNBLANK || - bl->props.fb_blank != FB_BLANK_UNBLANK || - bl->props.state & BL_CORE_FBBLANK) - brightness = 0; - mutex_lock(&wled->lock); if (brightness) { rc = wled->wled_set_brightness(wled, brightness); @@ -450,10 +444,23 @@ static int wled_update_status(struct backlight_device *bl) goto unlock_mutex; } - rc = wled->wled_sync_toggle(wled); - if (rc < 0) { - dev_err(wled->dev, "wled sync failed rc:%d\n", rc); - goto unlock_mutex; + if (wled->version < 5) { + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled sync failed rc:%d\n", rc); + goto unlock_mutex; + } + } else { + /* + * For WLED5 toggling the MOD_SYNC_BIT updates the + * brightness + */ + rc = wled5_mod_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled mod sync failed rc:%d\n", + rc); + goto unlock_mutex; + } } } @@ -564,7 +571,7 @@ unlock_mutex: static void wled_auto_string_detection(struct wled *wled) { - int rc = 0, i, delay_time_us; + int rc = 0, i, j, delay_time_us; u32 sink_config = 0; u8 sink_test = 0, sink_valid = 0, val; bool fault_set; @@ -611,14 +618,15 @@ static void wled_auto_string_detection(struct wled *wled) /* Iterate through the strings one by one */ for (i = 0; i < wled->cfg.num_strings; i++) { - sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i)); + j = wled->cfg.enabled_strings[i]; + sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j)); /* Enable feedback control */ rc = regmap_write(wled->regmap, wled->ctrl_addr + - WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1); + WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1); if (rc < 0) { dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n", - i + 1, rc); + j + 1, rc); goto failed_detect; } @@ -627,7 +635,7 @@ static void wled_auto_string_detection(struct wled *wled) WLED4_SINK_REG_CURR_SINK, sink_test); if (rc < 0) { dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n", - i + 1, rc); + j + 1, rc); goto failed_detect; } @@ -654,7 +662,7 @@ static void wled_auto_string_detection(struct wled *wled) if (fault_set) dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", - i + 1); + j + 1); else sink_valid |= sink_test; @@ -694,15 +702,16 @@ static void wled_auto_string_detection(struct wled *wled) /* Enable valid sinks */ if (wled->version == 4) { for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; if (sink_config & - BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) + BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j)) val = WLED4_SINK_REG_STR_MOD_MASK; else /* Disable modulator_en for unused sink */ val = 0; rc = regmap_write(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_MOD_EN(i), val); + WLED4_SINK_REG_STR_MOD_EN(j), val); if (rc < 0) { dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", rc); @@ -941,7 +950,7 @@ static const struct wled_config wled3_config_defaults = { .cs_out_en = false, .ext_gen = false, .cabc = false, - .enabled_strings = {0, 1, 2, 3}, + .enabled_strings = {0, 1, 2}, }; static int wled4_setup(struct wled *wled) @@ -1072,6 +1081,7 @@ static const struct wled_config wled4_config_defaults = { .cabc = false, .external_pfet = false, .auto_detection_enabled = false, + .enabled_strings = {0, 1, 2, 3}, }; static int wled5_setup(struct wled *wled) @@ -1185,6 +1195,7 @@ static const struct wled_config wled5_config_defaults = { .cabc = false, .external_pfet = false, .auto_detection_enabled = false, + .enabled_strings = {0, 1, 2, 3}, }; static const u32 wled3_boost_i_limit_values[] = { @@ -1248,21 +1259,6 @@ static const struct wled_var_cfg wled5_ovp_cfg = { .size = 16, }; -static u32 wled3_num_strings_values_fn(u32 idx) -{ - return idx + 1; -} - -static const struct wled_var_cfg wled3_num_strings_cfg = { - .fn = wled3_num_strings_values_fn, - .size = 3, -}; - -static const struct wled_var_cfg wled4_num_strings_cfg = { - .fn = wled3_num_strings_values_fn, - .size = 4, -}; - static u32 wled3_switch_freq_values_fn(u32 idx) { return 19200 / (2 * (1 + idx)); @@ -1287,14 +1283,6 @@ static const struct wled_var_cfg wled4_string_i_limit_cfg = { .size = ARRAY_SIZE(wled4_string_i_limit_values), }; -static const struct wled_var_cfg wled3_string_cfg = { - .size = 8, -}; - -static const struct wled_var_cfg wled4_string_cfg = { - .size = 16, -}; - static const struct wled_var_cfg wled5_mod_sel_cfg = { .size = 2, }; @@ -1344,11 +1332,6 @@ static int wled_configure(struct wled *wled) .val_ptr = &cfg->switch_freq, .cfg = &wled3_switch_freq_cfg, }, - { - .name = "qcom,num-strings", - .val_ptr = &cfg->num_strings, - .cfg = &wled3_num_strings_cfg, - }, }; const struct wled_u32_opts wled4_opts[] = { @@ -1372,11 +1355,6 @@ static int wled_configure(struct wled *wled) .val_ptr = &cfg->switch_freq, .cfg = &wled3_switch_freq_cfg, }, - { - .name = "qcom,num-strings", - .val_ptr = &cfg->num_strings, - .cfg = &wled4_num_strings_cfg, - }, }; const struct wled_u32_opts wled5_opts[] = { @@ -1401,11 +1379,6 @@ static int wled_configure(struct wled *wled) .cfg = &wled3_switch_freq_cfg, }, { - .name = "qcom,num-strings", - .val_ptr = &cfg->num_strings, - .cfg = &wled4_num_strings_cfg, - }, - { .name = "qcom,modulator-sel", .val_ptr = &cfg->mod_sel, .cfg = &wled5_mod_sel_cfg, @@ -1433,9 +1406,11 @@ static int wled_configure(struct wled *wled) wled->ctrl_addr = be32_to_cpu(*prop_addr); rc = of_property_read_string(dev->of_node, "label", &wled->name); - if (rc) + if (rc) { wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node); - + if (!wled->name) + return -ENOMEM; + } switch (wled->version) { case 3: u32_opts = wled3_opts; @@ -1472,7 +1447,7 @@ static int wled_configure(struct wled *wled) size = ARRAY_SIZE(wled5_opts); *cfg = wled5_config_defaults; wled->wled_set_brightness = wled5_set_brightness; - wled->wled_sync_toggle = wled5_sync_toggle; + wled->wled_sync_toggle = wled3_sync_toggle; wled->wled_cabc_config = wled5_cabc_config; wled->wled_ovp_delay = wled5_ovp_delay; wled->wled_auto_detection_required = @@ -1523,16 +1498,57 @@ static int wled_configure(struct wled *wled) *bool_opts[i].val_ptr = true; } - cfg->num_strings = cfg->num_strings + 1; - string_len = of_property_count_elems_of_size(dev->of_node, "qcom,enabled-strings", sizeof(u32)); - if (string_len > 0) - of_property_read_u32_array(dev->of_node, + if (string_len > 0) { + if (string_len > wled->max_string_count) { + dev_err(dev, "Cannot have more than %d strings\n", + wled->max_string_count); + return -EINVAL; + } + + rc = of_property_read_u32_array(dev->of_node, "qcom,enabled-strings", wled->cfg.enabled_strings, - sizeof(u32)); + string_len); + if (rc) { + dev_err(dev, "Failed to read %d elements from qcom,enabled-strings: %d\n", + string_len, rc); + return rc; + } + + for (i = 0; i < string_len; ++i) { + if (wled->cfg.enabled_strings[i] >= wled->max_string_count) { + dev_err(dev, + "qcom,enabled-strings index %d at %d is out of bounds\n", + wled->cfg.enabled_strings[i], i); + return -EINVAL; + } + } + + cfg->num_strings = string_len; + } + + rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val); + if (!rc) { + if (val < 1 || val > wled->max_string_count) { + dev_err(dev, "qcom,num-strings must be between 1 and %d\n", + wled->max_string_count); + return -EINVAL; + } + + if (string_len > 0) { + dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings" + " should be set\n"); + if (val > string_len) { + dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n"); + return -EINVAL; + } + } + + cfg->num_strings = val; + } return 0; } @@ -1703,22 +1719,23 @@ static int wled_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(bl); }; -static int wled_remove(struct platform_device *pdev) +static void wled_remove(struct platform_device *pdev) { - struct wled *wled = dev_get_drvdata(&pdev->dev); + struct wled *wled = platform_get_drvdata(pdev); mutex_destroy(&wled->lock); cancel_delayed_work_sync(&wled->ovp_work); disable_irq(wled->short_irq); disable_irq(wled->ovp_irq); - - return 0; } static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, + { .compatible = "qcom,pmi8950-wled", .data = (void *)4 }, + { .compatible = "qcom,pmi8994-wled", .data = (void *)4 }, { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, + { .compatible = "qcom,pm6150l-wled", .data = (void *)5 }, { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, {} }; |
