diff options
Diffstat (limited to 'drivers/w1')
| -rw-r--r-- | drivers/w1/masters/matrox_w1.c | 6 | ||||
| -rw-r--r-- | drivers/w1/slaves/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/w1/slaves/Makefile | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2438.c | 390 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2760.h | 10 | ||||
| -rw-r--r-- | drivers/w1/w1.c | 1 | ||||
| -rw-r--r-- | drivers/w1/w1_family.h | 1 | ||||
| -rw-r--r-- | drivers/w1/w1_int.c | 1 | ||||
| -rw-r--r-- | drivers/w1/w1_io.c | 1 | ||||
| -rw-r--r-- | drivers/w1/w1_log.h | 31 | ||||
| -rw-r--r-- | drivers/w1/w1_netlink.c | 5 |
11 files changed, 405 insertions, 48 deletions
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index 3749db8b4396..97a676bf5989 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -36,7 +36,6 @@ #include "../w1.h" #include "../w1_int.h" -#include "../w1_log.h" MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); @@ -157,9 +156,6 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent struct matrox_device *dev; int err; - assert(pdev != NULL); - assert(ent != NULL); - if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400) return -ENODEV; @@ -224,8 +220,6 @@ static void matrox_w1_remove(struct pci_dev *pdev) { struct matrox_device *dev = pci_get_drvdata(pdev); - assert(dev != NULL); - if (dev->found) { w1_remove_master_device(dev->bus_master); iounmap(dev->virt_addr); diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 0ef9f2663dbd..fb68465908f2 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -86,6 +86,12 @@ config W1_SLAVE_DS2433_CRC Each block has 30 bytes of data and a two byte CRC16. Full block writes are only allowed if the CRC is valid. +config W1_SLAVE_DS2438 + tristate "DS2438 Smart Battery Monitor 0x26 family support" + help + Say Y here if you want to use a 1-wire + DS2438 Smart Battery Monitor device support + config W1_SLAVE_DS2760 tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)" help diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index b4a358955ef9..54c63e420302 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_W1_SLAVE_DS2406) += w1_ds2406.o obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o +obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c new file mode 100644 index 000000000000..5ededb4965e1 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2438.c @@ -0,0 +1,390 @@ +/* + * 1-Wire implementation for the ds2438 chip + * + * Copyright (c) 2017 Mariusz Bialonczyk <manio@skyboo.net> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/types.h> +#include <linux/delay.h> + +#include "../w1.h" +#include "../w1_family.h" + +#define W1_DS2438_RETRIES 3 + +/* Memory commands */ +#define W1_DS2438_READ_SCRATCH 0xBE +#define W1_DS2438_WRITE_SCRATCH 0x4E +#define W1_DS2438_COPY_SCRATCH 0x48 +#define W1_DS2438_RECALL_MEMORY 0xB8 +/* Register commands */ +#define W1_DS2438_CONVERT_TEMP 0x44 +#define W1_DS2438_CONVERT_VOLTAGE 0xB4 + +#define DS2438_PAGE_SIZE 8 +#define DS2438_ADC_INPUT_VAD 0 +#define DS2438_ADC_INPUT_VDD 1 +#define DS2438_MAX_CONVERSION_TIME 10 /* ms */ + +/* Page #0 definitions */ +#define DS2438_STATUS_REG 0x00 /* Status/Configuration Register */ +#define DS2438_STATUS_IAD (1 << 0) /* Current A/D Control Bit */ +#define DS2438_STATUS_CA (1 << 1) /* Current Accumulator Configuration */ +#define DS2438_STATUS_EE (1 << 2) /* Current Accumulator Shadow Selector bit */ +#define DS2438_STATUS_AD (1 << 3) /* Voltage A/D Input Select Bit */ +#define DS2438_STATUS_TB (1 << 4) /* Temperature Busy Flag */ +#define DS2438_STATUS_NVB (1 << 5) /* Nonvolatile Memory Busy Flag */ +#define DS2438_STATUS_ADB (1 << 6) /* A/D Converter Busy Flag */ + +#define DS2438_TEMP_LSB 0x01 +#define DS2438_TEMP_MSB 0x02 +#define DS2438_VOLTAGE_LSB 0x03 +#define DS2438_VOLTAGE_MSB 0x04 +#define DS2438_CURRENT_LSB 0x05 +#define DS2438_CURRENT_MSB 0x06 +#define DS2438_THRESHOLD 0x07 + +int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[2]; + u8 crc; + size_t count; + + while (retries--) { + crc = 0; + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_RECALL_MEMORY; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_READ_SCRATCH; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1); + if (count == DS2438_PAGE_SIZE + 1) { + crc = w1_calc_crc8(buf, DS2438_PAGE_SIZE); + + /* check for correct CRC */ + if ((u8)buf[DS2438_PAGE_SIZE] == crc) + return 0; + } + } + return -1; +} + +int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; + unsigned int tm = DS2438_MAX_CONVERSION_TIME; + unsigned long sleep_rem; + int ret; + + mutex_lock(&sl->master->bus_mutex); + + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_write_8(sl->master, W1_DS2438_CONVERT_TEMP); + + mutex_unlock(&sl->master->bus_mutex); + sleep_rem = msleep_interruptible(tm); + if (sleep_rem != 0) { + ret = -1; + goto post_unlock; + } + + if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) { + ret = -1; + goto post_unlock; + } + + break; + } + + if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { + *temperature = (((int16_t) w1_buf[DS2438_TEMP_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_TEMP_LSB]); + ret = 0; + } else + ret = -1; + + mutex_unlock(&sl->master->bus_mutex); + +post_unlock: + return ret; +} + +int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[3]; + u8 status; + int perform_write = 0; + + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_RECALL_MEMORY; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_READ_SCRATCH; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + /* reading one byte of result */ + status = w1_read_8(sl->master); + + /* if bit0=1, set a value to a mask for easy compare */ + if (value) + value = mask; + + if ((status & mask) == value) + return 0; /* already set as requested */ + else { + /* changing bit */ + status ^= mask; + perform_write = 1; + } + break; + } + + if (perform_write) { + retries = W1_DS2438_RETRIES; + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_WRITE_SCRATCH; + w1_buf[1] = 0x00; + w1_buf[2] = status; + w1_write_block(sl->master, w1_buf, 3); + + if (w1_reset_select_slave(sl)) + continue; + w1_buf[0] = W1_DS2438_COPY_SCRATCH; + w1_buf[1] = 0x00; + w1_write_block(sl->master, w1_buf, 2); + + return 0; + } + } + return -1; +} + +uint16_t w1_ds2438_get_voltage(struct w1_slave *sl, int adc_input, uint16_t *voltage) +{ + unsigned int retries = W1_DS2438_RETRIES; + u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; + unsigned int tm = DS2438_MAX_CONVERSION_TIME; + unsigned long sleep_rem; + int ret; + + mutex_lock(&sl->master->bus_mutex); + + if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_AD, adc_input)) { + ret = -1; + goto pre_unlock; + } + + while (retries--) { + if (w1_reset_select_slave(sl)) + continue; + w1_write_8(sl->master, W1_DS2438_CONVERT_VOLTAGE); + + mutex_unlock(&sl->master->bus_mutex); + sleep_rem = msleep_interruptible(tm); + if (sleep_rem != 0) { + ret = -1; + goto post_unlock; + } + + if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) { + ret = -1; + goto post_unlock; + } + + break; + } + + if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { + *voltage = (((uint16_t) w1_buf[DS2438_VOLTAGE_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_VOLTAGE_LSB]); + ret = 0; + } else + ret = -1; + +pre_unlock: + mutex_unlock(&sl->master->bus_mutex); + +post_unlock: + return ret; +} + +static ssize_t iad_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + + if (count != 1 || off != 0) + return -EFAULT; + + mutex_lock(&sl->master->bus_mutex); + + if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_IAD, *buf & 0x01) == 0) + ret = 1; + else + ret = -EIO; + + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static ssize_t page0_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + mutex_lock(&sl->master->bus_mutex); + + if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { + memcpy(buf, &w1_buf, DS2438_PAGE_SIZE); + ret = DS2438_PAGE_SIZE; + } else + ret = -EIO; + + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static ssize_t temperature_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + ssize_t c = PAGE_SIZE; + int16_t temp; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + if (w1_ds2438_get_temperature(sl, &temp) == 0) { + c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", temp); + ret = PAGE_SIZE - c; + } else + ret = -EIO; + + return ret; +} + +static ssize_t vad_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + ssize_t c = PAGE_SIZE; + uint16_t voltage; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) { + c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage); + ret = PAGE_SIZE - c; + } else + ret = -EIO; + + return ret; +} + +static ssize_t vdd_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + ssize_t c = PAGE_SIZE; + uint16_t voltage; + + if (off != 0) + return 0; + if (!buf) + return -EINVAL; + + if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) { + c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage); + ret = PAGE_SIZE - c; + } else + ret = -EIO; + + return ret; +} + +static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, NULL, iad_write, 1); +static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE); +static BIN_ATTR_RO(temperature, 0/* real length varies */); +static BIN_ATTR_RO(vad, 0/* real length varies */); +static BIN_ATTR_RO(vdd, 0/* real length varies */); + +static struct bin_attribute *w1_ds2438_bin_attrs[] = { + &bin_attr_iad, + &bin_attr_page0, + &bin_attr_temperature, + &bin_attr_vad, + &bin_attr_vdd, + NULL, +}; + +static const struct attribute_group w1_ds2438_group = { + .bin_attrs = w1_ds2438_bin_attrs, +}; + +static const struct attribute_group *w1_ds2438_groups[] = { + &w1_ds2438_group, + NULL, +}; + +static struct w1_family_ops w1_ds2438_fops = { + .groups = w1_ds2438_groups, +}; + +static struct w1_family w1_ds2438_family = { + .fid = W1_FAMILY_DS2438, + .fops = &w1_ds2438_fops, +}; +module_w1_family(w1_ds2438_family); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>"); +MODULE_DESCRIPTION("1-wire driver for Maxim/Dallas DS2438 Smart Battery Monitor"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2438)); diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h index 58e774141568..24168c94eeae 100644 --- a/drivers/w1/slaves/w1_ds2760.h +++ b/drivers/w1/slaves/w1_ds2760.h @@ -24,11 +24,13 @@ #define DS2760_DATA_SIZE 0x40 #define DS2760_PROTECTION_REG 0x00 + #define DS2760_STATUS_REG 0x01 - #define DS2760_STATUS_IE (1 << 2) - #define DS2760_STATUS_SWEN (1 << 3) - #define DS2760_STATUS_RNAOP (1 << 4) - #define DS2760_STATUS_PMOD (1 << 5) +#define DS2760_STATUS_IE (1 << 2) +#define DS2760_STATUS_SWEN (1 << 3) +#define DS2760_STATUS_RNAOP (1 << 4) +#define DS2760_STATUS_PMOD (1 << 5) + #define DS2760_EEPROM_REG 0x07 #define DS2760_SPECIAL_FEATURE_REG 0x08 #define DS2760_VOLTAGE_MSB 0x0c diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 90a3d9338fd2..8511d1685db9 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -29,7 +29,6 @@ #include <linux/atomic.h> #include "w1.h" -#include "w1_log.h" #include "w1_int.h" #include "w1_family.h" #include "w1_netlink.h" diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index c4a6b257a367..869a3ff87d29 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -29,6 +29,7 @@ #define W1_COUNTER_DS2423 0x1D #define W1_THERM_DS1822 0x22 #define W1_EEPROM_DS2433 0x23 +#define W1_FAMILY_DS2438 0x26 #define W1_THERM_DS18B20 0x28 #define W1_FAMILY_DS2408 0x29 #define W1_EEPROM_DS2431 0x2D diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c index 2cae7b29bb5f..1072a2e620bb 100644 --- a/drivers/w1/w1_int.c +++ b/drivers/w1/w1_int.c @@ -22,7 +22,6 @@ #include <linux/moduleparam.h> #include "w1.h" -#include "w1_log.h" #include "w1_netlink.h" #include "w1_int.h" diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index de8bebc27896..1134e6b1eb02 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include "w1.h" -#include "w1_log.h" static int w1_delay_parm = 1; module_param_named(delay_coef, w1_delay_parm, int, 0); diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h deleted file mode 100644 index dd1422b6afbb..000000000000 --- a/drivers/w1/w1_log.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __W1_LOG_H -#define __W1_LOG_H - -#define DEBUG - -#ifdef W1_DEBUG -# define assert(expr) do {} while (0) -#else -# define assert(expr) \ - if(unlikely(!(expr))) { \ - pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } -#endif - -#endif /* __W1_LOG_H */ - diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c index 49e520ca79c5..027950f997d1 100644 --- a/drivers/w1/w1_netlink.c +++ b/drivers/w1/w1_netlink.c @@ -18,13 +18,10 @@ #include <linux/connector.h> #include "w1.h" -#include "w1_log.h" #include "w1_netlink.h" #if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE))) -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) - /* Bundle together everything required to process a request in one memory * allocation. */ @@ -598,7 +595,7 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp) sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd)); } - reply_size = MIN(CONNECTOR_MAX_MSG_SIZE, reply_size); + reply_size = min(CONNECTOR_MAX_MSG_SIZE, reply_size); /* allocate space for the block, a copy of the original message, * one node per cmd to point into the original message, |