diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/hpsa.c | 334 | ||||
| -rw-r--r-- | drivers/scsi/hpsa_cmd.h | 5 |
2 files changed, 254 insertions, 85 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 535505d5ece4..2461f4f6af29 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -253,6 +253,8 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk); static void hpsa_command_resubmit_worker(struct work_struct *work); +static u32 lockup_detected(struct ctlr_info *h); +static int detect_controller_lockup(struct ctlr_info *h); static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) { @@ -748,30 +750,43 @@ static inline u32 next_command(struct ctlr_info *h, u8 q) * a separate special register for submitting commands. */ -/* set_performant_mode: Modify the tag for cciss performant +/* + * set_performant_mode: Modify the tag for cciss performant * set bit 0 for pull model, bits 3-1 for block fetch * register number */ -static void set_performant_mode(struct ctlr_info *h, struct CommandList *c) +#define DEFAULT_REPLY_QUEUE (-1) +static void set_performant_mode(struct ctlr_info *h, struct CommandList *c, + int reply_queue) { if (likely(h->transMethod & CFGTBL_Trans_Performant)) { c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); - if (likely(h->msix_vector > 0)) + if (unlikely(!h->msix_vector)) + return; + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) c->Header.ReplyQueue = raw_smp_processor_id() % h->nreply_queues; + else + c->Header.ReplyQueue = reply_queue % h->nreply_queues; } } static void set_ioaccel1_performant_mode(struct ctlr_info *h, - struct CommandList *c) + struct CommandList *c, + int reply_queue) { struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; - /* Tell the controller to post the reply to the queue for this + /* + * Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - cp->ReplyQueue = smp_processor_id() % h->nreply_queues; - /* Set the bits in the address sent down to include: + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) + cp->ReplyQueue = smp_processor_id() % h->nreply_queues; + else + cp->ReplyQueue = reply_queue % h->nreply_queues; + /* + * Set the bits in the address sent down to include: * - performant mode bit (bit 0) * - pull count (bits 1-3) * - command type (bits 4-6) @@ -781,15 +796,21 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h, } static void set_ioaccel2_performant_mode(struct ctlr_info *h, - struct CommandList *c) + struct CommandList *c, + int reply_queue) { struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; - /* Tell the controller to post the reply to the queue for this + /* + * Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - cp->reply_queue = smp_processor_id() % h->nreply_queues; - /* Set the bits in the address sent down to include: + if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) + cp->reply_queue = smp_processor_id() % h->nreply_queues; + else + cp->reply_queue = reply_queue % h->nreply_queues; + /* + * Set the bits in the address sent down to include: * - performant mode bit not used in ioaccel mode 2 * - pull count (bits 0-3) * - command type isn't needed for ioaccel2 @@ -826,26 +847,32 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h, h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; } -static void enqueue_cmd_and_start_io(struct ctlr_info *h, - struct CommandList *c) +static void __enqueue_cmd_and_start_io(struct ctlr_info *h, + struct CommandList *c, int reply_queue) { dial_down_lockup_detection_during_fw_flash(h, c); atomic_inc(&h->commands_outstanding); switch (c->cmd_type) { case CMD_IOACCEL1: - set_ioaccel1_performant_mode(h, c); + set_ioaccel1_performant_mode(h, c, reply_queue); writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); break; case CMD_IOACCEL2: - set_ioaccel2_performant_mode(h, c); + set_ioaccel2_performant_mode(h, c, reply_queue); writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); break; default: - set_performant_mode(h, c); + set_performant_mode(h, c, reply_queue); h->access.submit_command(h, c); } } +static void enqueue_cmd_and_start_io(struct ctlr_info *h, + struct CommandList *c) +{ + __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE); +} + static inline int is_hba_lunid(unsigned char scsi3addr[]) { return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; @@ -1842,6 +1869,19 @@ static void complete_scsi_command(struct CommandList *cp) if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) atomic_dec(&cp->phys_disk->ioaccel_cmds_out); + /* + * We check for lockup status here as it may be set for + * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by + * fail_all_oustanding_cmds() + */ + if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) { + /* DID_NO_CONNECT will prevent a retry */ + cmd->result = DID_NO_CONNECT << 16; + cmd_free(h, cp); + cmd->scsi_done(cmd); + return; + } + if (cp->cmd_type == CMD_IOACCEL2) return process_ioaccel2_completion(h, cp, cmd, dev); @@ -2056,14 +2096,36 @@ static int hpsa_map_one(struct pci_dev *pdev, return 0; } -static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, - struct CommandList *c) +#define NO_TIMEOUT ((unsigned long) -1) +#define DEFAULT_TIMEOUT 30000 /* milliseconds */ +static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, + struct CommandList *c, int reply_queue, unsigned long timeout_msecs) { DECLARE_COMPLETION_ONSTACK(wait); c->waiting = &wait; - enqueue_cmd_and_start_io(h, c); - wait_for_completion(&wait); + __enqueue_cmd_and_start_io(h, c, reply_queue); + if (timeout_msecs == NO_TIMEOUT) { + /* TODO: get rid of this no-timeout thing */ + wait_for_completion_io(&wait); + return IO_OK; + } + if (!wait_for_completion_io_timeout(&wait, + msecs_to_jiffies(timeout_msecs))) { + dev_warn(&h->pdev->dev, "Command timed out.\n"); + return -ETIMEDOUT; + } + return IO_OK; +} + +static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList *c, + int reply_queue, unsigned long timeout_msecs) +{ + if (unlikely(lockup_detected(h))) { + c->err_info->CommandStatus = CMD_CTLR_LOCKUP; + return IO_OK; + } + return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, timeout_msecs); } static u32 lockup_detected(struct ctlr_info *h) @@ -2078,25 +2140,19 @@ static u32 lockup_detected(struct ctlr_info *h) return rc; } -static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h, - struct CommandList *c) -{ - /* If controller lockup detected, fake a hardware error. */ - if (unlikely(lockup_detected(h))) - c->err_info->CommandStatus = CMD_HARDWARE_ERR; - else - hpsa_scsi_do_simple_cmd_core(h, c); -} - #define MAX_DRIVER_CMD_RETRIES 25 -static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, - struct CommandList *c, int data_direction) +static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, + struct CommandList *c, int data_direction, unsigned long timeout_msecs) { int backoff_time = 10, retry_count = 0; + int rc; do { memset(c->err_info, 0, sizeof(*c->err_info)); - hpsa_scsi_do_simple_cmd_core(h, c); + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, + timeout_msecs); + if (rc) + break; retry_count++; if (retry_count > 3) { msleep(backoff_time); @@ -2107,6 +2163,9 @@ static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, check_for_busy(h, c)) && retry_count <= MAX_DRIVER_CMD_RETRIES); hpsa_pci_unmap(h->pdev, c, 1, data_direction); + if (retry_count > MAX_DRIVER_CMD_RETRIES) + rc = -EIO; + return rc; } static void hpsa_print_cmd(struct ctlr_info *h, char *txt, @@ -2183,6 +2242,9 @@ static void hpsa_scsi_interpret_error(struct ctlr_info *h, case CMD_UNABORTABLE: hpsa_print_cmd(h, "unabortable", cp); break; + case CMD_CTLR_LOCKUP: + hpsa_print_cmd(h, "controller lockup detected", cp); + break; default: hpsa_print_cmd(h, "unknown status", cp); dev_warn(d, "Unknown command status %x\n", @@ -2210,7 +2272,10 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, rc = -1; goto out; } - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if (rc) + goto out; ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { hpsa_scsi_interpret_error(h, c); @@ -2240,7 +2305,10 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h, rc = -1; goto out; } - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if (rc) + goto out; ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { hpsa_scsi_interpret_error(h, c); @@ -2252,7 +2320,7 @@ out: } static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, - u8 reset_type) + u8 reset_type, int reply_queue) { int rc = IO_OK; struct CommandList *c; @@ -2269,7 +2337,11 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */ - hpsa_scsi_do_simple_cmd_core(h, c); + rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); + if (rc) { + dev_warn(&h->pdev->dev, "Failed to send reset command\n"); + goto out; + } /* no unmap needed here because no data xfer. */ ei = c->err_info; @@ -2277,6 +2349,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, hpsa_scsi_interpret_error(h, c); rc = -1; } +out: cmd_free(h, c); return rc; } @@ -2394,15 +2467,18 @@ static int hpsa_get_raid_map(struct ctlr_info *h, sizeof(this_device->raid_map), 0, scsi3addr, TYPE_CMD)) { dev_warn(&h->pdev->dev, "Out of memory in hpsa_get_raid_map()\n"); - cmd_free(h, c); - return -ENOMEM; + rc = -ENOMEM; + goto out; } - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if (rc) + goto out; ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { hpsa_scsi_interpret_error(h, c); - cmd_free(h, c); - return -1; + rc = -1; + goto out; } cmd_free(h, c); @@ -2414,6 +2490,9 @@ static int hpsa_get_raid_map(struct ctlr_info *h, } hpsa_debug_map_buff(h, rc, &this_device->raid_map); return rc; +out: + cmd_free(h, c); + return rc; } static int hpsa_bmic_id_physical_device(struct ctlr_info *h, @@ -2433,7 +2512,8 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h, c->Request.CDB[2] = bmic_device_index & 0xff; c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE, + NO_TIMEOUT); ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { hpsa_scsi_interpret_error(h, c); @@ -2568,7 +2648,10 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, } if (extended_response) c->Request.CDB[1] = extended_response; - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if (rc) + goto out; ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { @@ -2661,7 +2744,7 @@ static int hpsa_volume_offline(struct ctlr_info *h, { struct CommandList *c; unsigned char *sense, sense_key, asc, ascq; - int ldstat = 0; + int rc, ldstat = 0; u16 cmd_status; u8 scsi_status; #define ASC_LUN_NOT_READY 0x04 @@ -2672,7 +2755,11 @@ static int hpsa_volume_offline(struct ctlr_info *h, if (!c) return 0; (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD); - hpsa_scsi_do_simple_cmd_core(h, c); + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT); + if (rc) { + cmd_free(h, c); + return 0; + } sense = c->err_info->SenseInfo; sense_key = sense[2]; asc = sense[12]; @@ -4005,7 +4092,11 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, dev->phys_disk[map_index]); } -/* Submit commands down the "normal" RAID stack path */ +/* + * Submit commands down the "normal" RAID stack path + * All callers to hpsa_ciss_submit must check lockup_detected + * beforehand, before (opt.) and after calling cmd_alloc + */ static int hpsa_ciss_submit(struct ctlr_info *h, struct CommandList *c, struct scsi_cmnd *cmd, unsigned char scsi3addr[]) @@ -4116,7 +4207,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); if (unlikely(lockup_detected(h))) { - cmd->result = DID_ERROR << 16; + cmd->result = DID_NO_CONNECT << 16; cmd->scsi_done(cmd); return 0; } @@ -4126,7 +4217,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) return SCSI_MLQUEUE_HOST_BUSY; } if (unlikely(lockup_detected(h))) { - cmd->result = DID_ERROR << 16; + cmd->result = DID_NO_CONNECT << 16; cmd_free(h, c); cmd->scsi_done(cmd); return 0; @@ -4321,7 +4412,10 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h, /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */ (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); - hpsa_scsi_do_simple_cmd_core(h, c); + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, + NO_TIMEOUT); + if (rc) + goto do_it_again; /* no unmap needed here because no data xfer. */ if (c->err_info->CommandStatus == CMD_SUCCESS) @@ -4332,7 +4426,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h, (c->err_info->SenseInfo[2] == NO_SENSE || c->err_info->SenseInfo[2] == UNIT_ATTENTION)) break; - +do_it_again: dev_warn(&h->pdev->dev, "waiting %d secs " "for device to become ready.\n", waittime); rc = 1; /* device not ready. */ @@ -4370,13 +4464,36 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) "device lookup failed.\n"); return FAILED; } - dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n", - h->scsi_host->host_no, dev->bus, dev->target, dev->lun); + + /* if controller locked up, we can guarantee command won't complete */ + if (lockup_detected(h)) { + dev_warn(&h->pdev->dev, + "scsi %d:%d:%d:%d RESET FAILED, lockup detected\n", + h->scsi_host->host_no, dev->bus, dev->target, + dev->lun); + return FAILED; + } + + /* this reset request might be the result of a lockup; check */ + if (detect_controller_lockup(h)) { + dev_warn(&h->pdev->dev, + "scsi %d:%d:%d:%d RESET FAILED, new lockup detected\n", + h->scsi_host->host_no, dev->bus, dev->target, + dev->lun); + return FAILED; + } + + hpsa_show_dev_msg(KERN_WARNING, h, dev, "resetting"); + /* send a reset to the SCSI LUN which the command was sent to */ - rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN); + rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN, + DEFAULT_REPLY_QUEUE); if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) return SUCCESS; + dev_warn(&h->pdev->dev, + "scsi %d:%d:%d:%d reset failed\n", + h->scsi_host->host_no, dev->bus, dev->target, dev->lun); return FAILED; } @@ -4421,7 +4538,7 @@ static void hpsa_get_tag(struct ctlr_info *h, } static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, - struct CommandList *abort, int swizzle) + struct CommandList *abort, int swizzle, int reply_queue) { int rc = IO_OK; struct CommandList *c; @@ -4439,9 +4556,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, 0, 0, scsi3addr, TYPE_MSG); if (swizzle) swizzle_abort_tag(&c->Request.CDB[4]); - hpsa_scsi_do_simple_cmd_core(h, c); + (void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); hpsa_get_tag(h, abort, &taglower, &tagupper); - dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd_core completed.\n", + dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd(abort) completed.\n", __func__, tagupper, taglower); /* no unmap needed here because no data xfer. */ @@ -4473,7 +4590,7 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, */ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, - unsigned char *scsi3addr, struct CommandList *abort) + unsigned char *scsi3addr, struct CommandList *abort, int reply_queue) { int rc = IO_OK; struct scsi_cmnd *scmd; /* scsi command within request being aborted */ @@ -4516,7 +4633,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, "Reset as abort: Resetting physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", psa[0], psa[1], psa[2], psa[3], psa[4], psa[5], psa[6], psa[7]); - rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET); + rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET, reply_queue); if (rc != 0) { dev_warn(&h->pdev->dev, "Reset as abort: Failed on physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", @@ -4550,7 +4667,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, * make this true someday become false. */ static int hpsa_send_abort_both_ways(struct ctlr_info *h, - unsigned char *scsi3addr, struct CommandList *abort) + unsigned char *scsi3addr, struct CommandList *abort, int reply_queue) { /* ioccelerator mode 2 commands should be aborted via the * accelerated path, since RAID path is unaware of these commands, @@ -4558,10 +4675,20 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h, * Change abort to physical device reset. */ if (abort->cmd_type == CMD_IOACCEL2) - return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort); + return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, + abort, reply_queue); + + return hpsa_send_abort(h, scsi3addr, abort, 0, reply_queue) && + hpsa_send_abort(h, scsi3addr, abort, 1, reply_queue); +} - return hpsa_send_abort(h, scsi3addr, abort, 0) && - hpsa_send_abort(h, scsi3addr, abort, 1); +/* Find out which reply queue a command was meant to return on */ +static int hpsa_extract_reply_queue(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->cmd_type == CMD_IOACCEL2) + return h->ioaccel2_cmd_pool[c->cmdindex].reply_queue; + return c->Header.ReplyQueue; } /* Send an abort for the specified command. @@ -4579,7 +4706,10 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) char msg[256]; /* For debug messaging. */ int ml = 0; __le32 tagupper, taglower; - int refcount; + int refcount, reply_queue; + + if (sc == NULL) + return FAILED; /* Find the controller of the command to be aborted */ h = sdev_to_hba(sc->device); @@ -4587,8 +4717,27 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) "ABORT REQUEST FAILED, Controller lookup failed.\n")) return FAILED; - if (lockup_detected(h)) + /* Find the device of the command to be aborted */ + dev = sc->device->hostdata; + if (!dev) { + dev_err(&h->pdev->dev, "%s FAILED, Device lookup failed.\n", + msg); return FAILED; + } + + /* If controller locked up, we can guarantee command won't complete */ + if (lockup_detected(h)) { + hpsa_show_dev_msg(KERN_WARNING, h, dev, + "ABORT FAILED, lockup detected"); + return FAILED; + } + + /* This is a good time to check if controller lockup has occurred */ + if (detect_controller_lockup(h)) { + hpsa_show_dev_msg(KERN_WARNING, h, dev, + "ABORT FAILED, new lockup detected"); + return FAILED; + } /* Check that controller supports some kind of task abort */ if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) && @@ -4601,14 +4750,6 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) sc->device->id, sc->device->lun, "Aborting command"); - /* Find the device of the command to be aborted */ - dev = sc->device->hostdata; - if (!dev) { - dev_err(&h->pdev->dev, "%s FAILED, Device lookup failed.\n", - msg); - return FAILED; - } - /* Get SCSI command to be aborted */ abort = (struct CommandList *) sc->host_scribble; if (abort == NULL) { @@ -4621,6 +4762,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) return SUCCESS; } hpsa_get_tag(h, abort, &taglower, &tagupper); + reply_queue = hpsa_extract_reply_queue(h, abort); ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower); as = abort->scsi_cmd; if (as != NULL) @@ -4633,7 +4775,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) * by the firmware (but not to the scsi mid layer) but we can't * distinguish which. Send the abort down. */ - rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort); + rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort, reply_queue); if (rc != 0) { hpsa_show_dev_msg(KERN_WARNING, h, dev, "FAILED to abort command"); @@ -4956,10 +5098,14 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->SG[0].Len = cpu_to_le32(iocommand.buf_size); c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */ } - hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c); + rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT); if (iocommand.buf_size > 0) hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); + if (rc) { + rc = -EIO; + goto out; + } /* Copy the error information out */ memcpy(&iocommand.error_info, c->err_info, @@ -5086,10 +5232,15 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) } c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST); } - hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c); + status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT); if (sg_used) hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); + if (status) { + status = -EIO; + goto cleanup0; + } + /* Copy the error information out */ memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); if (copy_to_user(argp, ioc, sizeof(*ioc))) { @@ -6227,6 +6378,8 @@ static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h) * as we enter this code.) */ for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) { + if (h->remove_in_progress) + goto done; spin_lock_irqsave(&h->lock, flags); doorbell_value = readl(h->vaddr + SA5_DOORBELL); spin_unlock_irqrestore(&h->lock, flags); @@ -6622,17 +6775,21 @@ static void fail_all_outstanding_cmds(struct ctlr_info *h) { int i, refcount; struct CommandList *c; + int failcount = 0; flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */ for (i = 0; i < h->nr_cmds; i++) { c = h->cmd_pool + i; refcount = atomic_inc_return(&c->refcount); if (refcount > 1) { - c->err_info->CommandStatus = CMD_HARDWARE_ERR; + c->err_info->CommandStatus = CMD_CTLR_LOCKUP; finish_cmd(c); + failcount++; } cmd_free(h, c); } + dev_warn(&h->pdev->dev, + "failed %d commands in fail_all\n", failcount); } static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value) @@ -6658,18 +6815,19 @@ static void controller_lockup_detected(struct ctlr_info *h) if (!lockup_detected) { /* no heartbeat, but controller gave us a zero. */ dev_warn(&h->pdev->dev, - "lockup detected but scratchpad register is zero\n"); + "lockup detected after %d but scratchpad register is zero\n", + h->heartbeat_sample_interval / HZ); lockup_detected = 0xffffffff; } set_lockup_detected_for_all_cpus(h, lockup_detected); spin_unlock_irqrestore(&h->lock, flags); - dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n", - lockup_detected); + dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n", + lockup_detected, h->heartbeat_sample_interval / HZ); pci_disable_device(h->pdev); fail_all_outstanding_cmds(h); } -static void detect_controller_lockup(struct ctlr_info *h) +static int detect_controller_lockup(struct ctlr_info *h) { u64 now; u32 heartbeat; @@ -6679,7 +6837,7 @@ static void detect_controller_lockup(struct ctlr_info *h) /* If we've received an interrupt recently, we're ok. */ if (time_after64(h->last_intr_timestamp + (h->heartbeat_sample_interval), now)) - return; + return false; /* * If we've already checked the heartbeat recently, we're ok. @@ -6688,7 +6846,7 @@ static void detect_controller_lockup(struct ctlr_info *h) */ if (time_after64(h->last_heartbeat_timestamp + (h->heartbeat_sample_interval), now)) - return; + return false; /* If heartbeat has not changed since we last looked, we're not ok. */ spin_lock_irqsave(&h->lock, flags); @@ -6696,12 +6854,13 @@ static void detect_controller_lockup(struct ctlr_info *h) spin_unlock_irqrestore(&h->lock, flags); if (h->last_heartbeat == heartbeat) { controller_lockup_detected(h); - return; + return true; } /* We're ok. */ h->last_heartbeat = heartbeat; h->last_heartbeat_timestamp = now; + return false; } static void hpsa_ack_ctlr_events(struct ctlr_info *h) @@ -7052,8 +7211,10 @@ static void hpsa_flush_cache(struct ctlr_info *h) { char *flush_buf; struct CommandList *c; + int rc; /* Don't bother trying to flush the cache if locked up */ + /* FIXME not necessary if do_simple_cmd does the check */ if (unlikely(lockup_detected(h))) return; flush_buf = kzalloc(4, GFP_KERNEL); @@ -7069,7 +7230,10 @@ static void hpsa_flush_cache(struct ctlr_info *h) RAID_CTLR_LUNID, TYPE_CMD)) { goto out; } - hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_TODEVICE, NO_TIMEOUT); + if (rc) + goto out; if (c->err_info->CommandStatus != 0) out: dev_warn(&h->pdev->dev, diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 76d549964e84..f52c847db89f 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -43,6 +43,11 @@ #define CMD_TIMEOUT 0x000B #define CMD_UNABORTABLE 0x000C #define CMD_IOACCEL_DISABLED 0x000E +#define CMD_CTLR_LOCKUP 0xffff +/* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec + * it is a value defined by the driver that commands can be marked + * with when a controller lockup has been detected by the driver + */ /* Unit Attentions ASC's as defined for the MSA2012sa */ |