summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/paride/pcd.c4
-rw-r--r--drivers/crypto/qat/qat_common/adf_ctl_drv.c2
-rw-r--r--drivers/gpu/drm/i915/intel_bios.c2
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c2
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_verbs.c2
-rw-r--r--drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c2
-rw-r--r--drivers/irqchip/Kconfig2
-rw-r--r--drivers/media/i2c/cx25840/cx25840-ir.c2
-rw-r--r--drivers/media/pci/cx23885/cx23888-ir.c2
-rw-r--r--drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c2
-rw-r--r--drivers/misc/mei/pci-me.c4
-rw-r--r--drivers/misc/mei/pci-txe.c4
-rw-r--r--drivers/net/bonding/bond_sysfs_slave.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/cmd.c4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c2
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c2
-rw-r--r--drivers/net/ethernet/via/via-velocity.c2
-rw-r--r--drivers/net/wireless/libertas/cfg.c2
-rw-r--r--drivers/net/wireless/libertas_tf/main.c2
-rw-r--r--drivers/platform/x86/Kconfig4
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic79xx2
-rw-r--r--drivers/scsi/fnic/fnic_debugfs.c2
-rw-r--r--drivers/scsi/fnic/fnic_trace.c2
-rw-r--r--drivers/scsi/nsp32.c2
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_nx2.c2
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/video/backlight/88pm860x_bl.c2
29 files changed, 34 insertions, 34 deletions
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 719cb1bc1640..3b7c9f1be484 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -69,8 +69,8 @@
nice This parameter controls the driver's use of
idle CPU time, at the expense of some speed.
- If this driver is built into the kernel, you can use kernel
- the following command line parameters, with the same values
+ If this driver is built into the kernel, you can use the
+ following kernel command line parameters, with the same values
as the corresponding module parameters listed above:
pcd.drive0
diff --git a/drivers/crypto/qat/qat_common/adf_ctl_drv.c b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
index d97069b8a8e4..6a92284a86b2 100644
--- a/drivers/crypto/qat/qat_common/adf_ctl_drv.c
+++ b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
@@ -436,7 +436,7 @@ static long adf_ctl_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
ret = adf_ctl_ioctl_get_status(fp, cmd, arg);
break;
default:
- pr_err("QAT: Invalid ioclt\n");
+ pr_err("QAT: Invalid ioctl\n");
ret = -EFAULT;
break;
}
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index eee79e1c3222..afcc8dd40bdd 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -946,7 +946,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n",
port_name(port));
if (is_dvi && (port == PORT_A || port == PORT_E))
- DRM_DEBUG_KMS("Port %c is TMDS compabile\n", port_name(port));
+ DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port));
if (!is_dvi && !is_dp && !is_crt)
DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n",
port_name(port));
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ac87fa3058d..2e45ae3796f1 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -357,7 +357,7 @@ config I2C_BCM_KONA
If you say yes to this option, support will be included for the
I2C interface on the Broadcom Kona family of processors.
- If you do not need KONA I2C inteface, say N.
+ If you do not need KONA I2C interface, say N.
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e086fb075f2b..e3b0337faeb7 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -244,7 +244,7 @@ static bool is_ack(struct s3c24xx_i2c *i2c)
}
usleep_range(1000, 2000);
}
- dev_err(i2c->dev, "ack was not recieved\n");
+ dev_err(i2c->dev, "ack was not received\n");
return false;
}
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index 8f5f2577f288..e8b8569788c0 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -1870,7 +1870,7 @@ static int ocrdma_build_inline_sges(struct ocrdma_qp *qp,
hdr->total_len = ocrdma_sglist_len(wr->sg_list, wr->num_sge);
if (unlikely(hdr->total_len > qp->max_inline_data)) {
pr_err("%s() supported_len=0x%x,\n"
- " unspported len req=0x%x\n", __func__,
+ " unsupported len req=0x%x\n", __func__,
qp->max_inline_data, hdr->total_len);
return -EINVAL;
}
diff --git a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
index f8dfd76be89f..db3588df3546 100644
--- a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
+++ b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
@@ -511,7 +511,7 @@ int usnic_ib_qp_grp_modify(struct usnic_ib_qp_grp *qp_grp,
usnic_ib_qp_grp_state_to_string(old_state),
usnic_ib_qp_grp_state_to_string(new_state));
} else {
- usnic_err("Failed to transistion %u from %s to %s",
+ usnic_err("Failed to transition %u from %s to %s",
qp_grp->grp_id,
usnic_ib_qp_grp_state_to_string(old_state),
usnic_ib_qp_grp_state_to_string(new_state));
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index b8632bf9a7f3..a31a9e40eed9 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -109,7 +109,7 @@ config XTENSA_MX
config IRQ_CROSSBAR
bool
help
- Support for a CROSSBAR ip that preceeds the main interrupt controller.
+ Support for a CROSSBAR ip that precedes the main interrupt controller.
The primary irqchip invokes the crossbar's callback which inturn allocates
a free irq and configures the IP. Thus the peripheral interrupts are
routed to one of the free irqchip interrupt lines.
diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c
index e6588ee5bdb0..4cf8f18bf097 100644
--- a/drivers/media/i2c/cx25840/cx25840-ir.c
+++ b/drivers/media/i2c/cx25840/cx25840-ir.c
@@ -224,7 +224,7 @@ static inline unsigned int lpf_count_to_us(unsigned int count)
}
/*
- * FIFO register pulse width count compuations
+ * FIFO register pulse width count computations
*/
static u32 clock_divider_to_resolution(u16 divider)
{
diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c
index 2c951dec2d33..c2ff5fc01157 100644
--- a/drivers/media/pci/cx23885/cx23888-ir.c
+++ b/drivers/media/pci/cx23885/cx23888-ir.c
@@ -263,7 +263,7 @@ static inline unsigned int lpf_count_to_us(unsigned int count)
}
/*
- * FIFO register pulse width count compuations
+ * FIFO register pulse width count computations
*/
static u32 clock_divider_to_resolution(u16 divider)
{
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
index e60cbb3aa609..f86cec091bf4 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
@@ -259,7 +259,7 @@ static int vv6410_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
fine = val % VV6410_CIF_LINELENGTH;
coarse = min(512, val / VV6410_CIF_LINELENGTH);
- PDEBUG(D_CONF, "Set coarse exposure to %d, fine expsure to %d",
+ PDEBUG(D_CONF, "Set coarse exposure to %d, fine exposure to %d",
coarse, fine);
err = stv06xx_write_sensor(sd, VV6410_FINEH, fine >> 8);
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index a0e9422b55a2..959c313d84a7 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -424,7 +424,7 @@ static int mei_me_pm_runtime_resume(struct device *device)
}
/**
- * mei_me_set_pm_domain - fill and set pm domian stucture for device
+ * mei_me_set_pm_domain - fill and set pm domain structure for device
*
* @dev: mei_device
*/
@@ -444,7 +444,7 @@ static inline void mei_me_set_pm_domain(struct mei_device *dev)
}
/**
- * mei_me_unset_pm_domain - clean pm domian stucture for device
+ * mei_me_unset_pm_domain - clean pm domain structure for device
*
* @dev: mei_device
*/
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index 19de57368b7a..74727dda51c1 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -371,7 +371,7 @@ static int mei_txe_pm_runtime_resume(struct device *device)
}
/**
- * mei_txe_set_pm_domain - fill and set pm domian stucture for device
+ * mei_txe_set_pm_domain - fill and set pm domain structure for device
*
* @dev: mei_device
*/
@@ -391,7 +391,7 @@ static inline void mei_txe_set_pm_domain(struct mei_device *dev)
}
/**
- * mei_txe_unset_pm_domain - clean pm domian stucture for device
+ * mei_txe_unset_pm_domain - clean pm domain structure for device
*
* @dev: mei_device
*/
diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 5cd532ca1cfe..b01b0ce4d1be 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -36,7 +36,7 @@ static ssize_t state_show(struct slave *slave, char *buf)
case BOND_STATE_BACKUP:
return sprintf(buf, "backup\n");
default:
- return sprintf(buf, "UNKONWN\n");
+ return sprintf(buf, "UNKNOWN\n");
}
}
static SLAVE_ATTR_RO(state);
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 02a2e90d581a..923c4878461e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1695,7 +1695,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
if (err) {
vp_oper->vlan_idx = NO_INDX;
mlx4_warn(&priv->dev,
- "No vlan resorces slave %d, port %d\n",
+ "No vlan resources slave %d, port %d\n",
slave, port);
return err;
}
@@ -1711,7 +1711,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
err = vp_oper->mac_idx;
vp_oper->mac_idx = NO_INDX;
mlx4_warn(&priv->dev,
- "No mac resorces slave %d, port %d\n",
+ "No mac resources slave %d, port %d\n",
slave, port);
return err;
}
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
index db4280ce9c09..716fc37ada5a 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
@@ -922,7 +922,7 @@ int netxen_config_ipaddr(struct netxen_adapter *adapter, __be32 ip, int cmd)
rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0) {
- printk(KERN_ERR "%s: could not notify %s IP 0x%x reuqest\n",
+ printk(KERN_ERR "%s: could not notify %s IP 0x%x request\n",
adapter->netdev->name,
(cmd == NX_IP_UP) ? "Add" : "Remove", ip);
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 851cb4a80d50..03cd4c3d7835 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -941,7 +941,7 @@ void qlcnic_82xx_config_ipaddr(struct qlcnic_adapter *adapter,
rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0)
dev_err(&adapter->netdev->dev,
- "could not notify %s IP 0x%x reuqest\n",
+ "could not notify %s IP 0x%x request\n",
(cmd == QLCNIC_IP_UP) ? "Add" : "Remove", ip);
}
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index f5fbc12d3e10..a43e8492b1ce 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -2056,7 +2056,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
struct sk_buff *skb;
if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->netdev->name);
+ VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame spans multiple RDs.\n", vptr->netdev->name);
stats->rx_length_errors++;
return -EINVAL;
}
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 47a998d8f99e..40ab7f0b7be0 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1353,7 +1353,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
wait_event_interruptible_timeout(priv->scan_q,
(priv->scan_req == NULL),
(15 * HZ));
- lbs_deb_assoc("assoc: scanning competed\n");
+ lbs_deb_assoc("assoc: scanning completed\n");
}
/* Find the BSS we want using available scan results */
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 088de9d25c39..25c5acc78bd1 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -332,7 +332,7 @@ static int lbtf_op_start(struct ieee80211_hw *hw)
err_prog_firmware:
priv->hw_reset_device(card);
- lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programing fw; ret=%d", ret);
+ lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programming fw; ret=%d", ret);
return ret;
}
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 3bbcbf12c1fb..4dcfb7116a04 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -540,7 +540,7 @@ config ASUS_NB_WMI
This is a driver for newer Asus notebooks. It adds extra features
like wireless radio and bluetooth control, leds, hotkeys, backlight...
- For more informations, see
+ For more information, see
<file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
If you have an ACPI-WMI compatible Asus Notebook, say Y or M
@@ -553,7 +553,7 @@ config EEEPC_WMI
This is a driver for newer Eee PC laptops. It adds extra features
like wireless radio and bluetooth control, leds, hotkeys, backlight...
- For more informations, see
+ For more information, see
<file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 6739069477de..3b3d599103f8 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -70,7 +70,7 @@ config AIC79XX_DEBUG_MASK
default "0"
help
Bit mask of debug options that is only valid if the
- CONFIG_AIC79XX_DEBUG_ENBLE option is enabled. The bits in this mask
+ CONFIG_AIC79XX_DEBUG_ENABLE option is enabled. The bits in this mask
are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the
variable ahd_debug in that file to find them.
diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c
index 2c613bdea78f..5980c10c734d 100644
--- a/drivers/scsi/fnic/fnic_debugfs.c
+++ b/drivers/scsi/fnic/fnic_debugfs.c
@@ -210,7 +210,7 @@ static ssize_t fnic_trace_ctrl_write(struct file *filp,
else if (*trace_type == fc_trc_flag->fc_clear)
fnic_fc_trace_cleared = val;
else
- pr_err("fnic: cannot write to any debufs file\n");
+ pr_err("fnic: cannot write to any debugfs file\n");
(*ppos)++;
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index c77285926827..8b1b38751b49 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -592,7 +592,7 @@ int fnic_fc_trace_set_data(u32 host_no, u8 frame_type,
if (fnic_fc_trace_cleared == 1) {
fc_trace_entries.rd_idx = fc_trace_entries.wr_idx = 0;
- pr_info("fnic: Reseting the read idx\n");
+ pr_info("fnic: Resetting the read idx\n");
memset((void *)fnic_fc_ctlr_trace_buf_p, 0,
fnic_fc_trace_max_pages * PAGE_SIZE);
fnic_fc_trace_cleared = 0;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 50b086aef178..53284eb23a15 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -930,7 +930,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s
/* check target ID is not same as this initiator ID */
if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
- nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
+ nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
SCpnt->result = DID_BAD_TARGET << 16;
done(SCpnt);
return 0;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 340ceff03823..34aad32829f5 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -533,7 +533,7 @@ static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
} while ((--time_out != 0) && (reg & mask) != 0);
if (time_out == 0) {
- nsp_msg(KERN_DEBUG, " %s signal off timeut", str);
+ nsp_msg(KERN_DEBUG, " %s signal off timeout", str);
}
return 0;
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index da9e3902f219..24a852828b5d 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -399,7 +399,7 @@ qla8044_idc_lock(struct qla_hw_data *ha)
*/
ql_dbg(ql_dbg_p3p, vha, 0xb08a,
"%s: IDC lock Recovery by %d "
- "failed, Retrying timout\n", __func__,
+ "failed, Retrying timeout\n", __func__,
ha->portnum);
timeout = 0;
}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 82800a775501..56f4336ffa86 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -126,7 +126,7 @@ config XPS_USB_HCD_XILINX
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
---help---
- Xilinx xps USB host controller core is EHCI compilant and has
+ Xilinx xps USB host controller core is EHCI compliant and has
transaction translator built-in. It can be configured to either
support both high speed and full speed devices, or high speed
devices only.
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 7db5234462d0..a6f7cc0a0883 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -216,7 +216,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
data->reg_duty_cycle = res->start;
res = platform_get_resource_byname(pdev, IORESOURCE_REG, "always on");
if (!res) {
- dev_err(&pdev->dev, "No REG resorce for always on\n");
+ dev_err(&pdev->dev, "No REG resource for always on\n");
return -ENXIO;
}
data->reg_always_on = res->start;