summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/hpsa.c73
-rw-r--r--drivers/scsi/hpsa.h1
2 files changed, 55 insertions, 19 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 87b260e403ec..31423b6dc26d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1045,11 +1045,7 @@ static void set_performant_mode(struct ctlr_info *h, struct CommandList *c,
c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
if (unlikely(!h->msix_vectors))
return;
- if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
- c->Header.ReplyQueue =
- raw_smp_processor_id() % h->nreply_queues;
- else
- c->Header.ReplyQueue = reply_queue % h->nreply_queues;
+ c->Header.ReplyQueue = reply_queue;
}
}
@@ -1063,10 +1059,7 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h,
* Tell the controller to post the reply to the queue for this
* processor. This seems to give the best I/O throughput.
*/
- if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
- cp->ReplyQueue = smp_processor_id() % h->nreply_queues;
- else
- cp->ReplyQueue = reply_queue % h->nreply_queues;
+ cp->ReplyQueue = reply_queue;
/*
* Set the bits in the address sent down to include:
* - performant mode bit (bit 0)
@@ -1087,10 +1080,7 @@ static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h,
/* Tell the controller to post the reply to the queue for this
* processor. This seems to give the best I/O throughput.
*/
- if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
- cp->reply_queue = smp_processor_id() % h->nreply_queues;
- else
- cp->reply_queue = reply_queue % h->nreply_queues;
+ cp->reply_queue = reply_queue;
/* Set the bits in the address sent down to include:
* - performant mode bit not used in ioaccel mode 2
* - pull count (bits 0-3)
@@ -1109,10 +1099,7 @@ static void set_ioaccel2_performant_mode(struct ctlr_info *h,
* Tell the controller to post the reply to the queue for this
* processor. This seems to give the best I/O throughput.
*/
- if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
- cp->reply_queue = smp_processor_id() % h->nreply_queues;
- else
- cp->reply_queue = reply_queue % h->nreply_queues;
+ cp->reply_queue = reply_queue;
/*
* Set the bits in the address sent down to include:
* - performant mode bit not used in ioaccel mode 2
@@ -1157,6 +1144,8 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
{
dial_down_lockup_detection_during_fw_flash(h, c);
atomic_inc(&h->commands_outstanding);
+
+ reply_queue = h->reply_map[raw_smp_processor_id()];
switch (c->cmd_type) {
case CMD_IOACCEL1:
set_ioaccel1_performant_mode(h, c, reply_queue);
@@ -7376,6 +7365,26 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
h->msix_vectors = 0;
}
+static void hpsa_setup_reply_map(struct ctlr_info *h)
+{
+ const struct cpumask *mask;
+ unsigned int queue, cpu;
+
+ for (queue = 0; queue < h->msix_vectors; queue++) {
+ mask = pci_irq_get_affinity(h->pdev, queue);
+ if (!mask)
+ goto fallback;
+
+ for_each_cpu(cpu, mask)
+ h->reply_map[cpu] = queue;
+ }
+ return;
+
+fallback:
+ for_each_possible_cpu(cpu)
+ h->reply_map[cpu] = 0;
+}
+
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
* controllers that are capable. If not, we use legacy INTx mode.
*/
@@ -7771,6 +7780,10 @@ static int hpsa_pci_init(struct ctlr_info *h)
err = hpsa_interrupt_mode(h);
if (err)
goto clean1;
+
+ /* setup mapping between CPU and reply queue */
+ hpsa_setup_reply_map(h);
+
err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
if (err)
goto clean2; /* intmode+region, pci */
@@ -8480,6 +8493,28 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
return wq;
}
+static void hpda_free_ctlr_info(struct ctlr_info *h)
+{
+ kfree(h->reply_map);
+ kfree(h);
+}
+
+static struct ctlr_info *hpda_alloc_ctlr_info(void)
+{
+ struct ctlr_info *h;
+
+ h = kzalloc(sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return NULL;
+
+ h->reply_map = kzalloc(sizeof(*h->reply_map) * nr_cpu_ids, GFP_KERNEL);
+ if (!h->reply_map) {
+ kfree(h);
+ return NULL;
+ }
+ return h;
+}
+
static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int dac, rc;
@@ -8517,7 +8552,7 @@ reinit_after_soft_reset:
* the driver. See comments in hpsa.h for more info.
*/
BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
- h = kzalloc(sizeof(*h), GFP_KERNEL);
+ h = hpda_alloc_ctlr_info();
if (!h) {
dev_err(&pdev->dev, "Failed to allocate controller head\n");
return -ENOMEM;
@@ -8916,7 +8951,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
h->lockup_detected = NULL; /* init_one 2 */
/* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
- kfree(h); /* init_one 1 */
+ hpda_free_ctlr_info(h); /* init_one 1 */
}
static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev,
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 018f980a701c..fb9f5e7f8209 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -158,6 +158,7 @@ struct bmic_controller_parameters {
#pragma pack()
struct ctlr_info {
+ unsigned int *reply_map;
int ctlr;
char devname[8];
char *product_name;