diff options
Diffstat (limited to 'include/drm/display/drm_dp_helper.h')
| -rw-r--r-- | include/drm/display/drm_dp_helper.h | 154 |
1 files changed, 147 insertions, 7 deletions
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h index 8bed890eec2c..df2f24b950e4 100644 --- a/include/drm/display/drm_dp_helper.h +++ b/include/drm/display/drm_dp_helper.h @@ -37,6 +37,7 @@ bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], int lane_count); bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE], int lane_count); +bool drm_dp_post_lt_adj_req_in_progress(const u8 link_status[DP_LINK_STATUS_SIZE]); u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE], int lane); u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE], @@ -112,7 +113,8 @@ struct drm_dp_vsc_sdp { * @target_rr: Target Refresh * @duration_incr_ms: Successive frame duration increase * @duration_decr_ms: Successive frame duration decrease - * @operation_mode: Adaptive Sync Operation Mode + * @target_rr_divider: Target refresh rate divider + * @mode: Adaptive Sync Operation Mode */ struct drm_dp_as_sdp { unsigned char sdp_type; @@ -122,6 +124,7 @@ struct drm_dp_as_sdp { int target_rr; int duration_incr_ms; int duration_decr_ms; + bool target_rr_divider; enum operation_mode mode; }; @@ -154,6 +157,13 @@ drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) } static inline bool +drm_dp_post_lt_adj_req_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x13 && + (dpcd[DP_MAX_LANE_COUNT] & DP_POST_LT_ADJ_REQ_SUPPORTED); +} + +static inline bool drm_dp_fast_training_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) { return dpcd[DP_DPCD_REV] >= 0x11 && @@ -201,6 +211,11 @@ u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]); int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE], u8 dsc_bpc[3]); +int drm_dp_dsc_sink_max_slice_throughput(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], + int peak_pixel_rate, bool is_rgb_yuv444); +int drm_dp_dsc_branch_max_overall_throughput(const u8 dsc_branch_dpcd[DP_DSC_BRANCH_CAP_SIZE], + bool is_rgb_yuv444); +int drm_dp_dsc_branch_max_line_width(const u8 dsc_branch_dpcd[DP_DSC_BRANCH_CAP_SIZE]); static inline bool drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) @@ -516,23 +531,93 @@ struct drm_dp_aux { * @powered_down: If true then the remote endpoint is powered down. */ bool powered_down; + + /** + * @no_zero_sized: If the hw can't use zero sized transfers (NVIDIA) + */ + bool no_zero_sized; + + /** + * @dpcd_probe_disabled: If probing before a DPCD access is disabled. + */ + bool dpcd_probe_disabled; }; int drm_dp_dpcd_probe(struct drm_dp_aux *aux, unsigned int offset); void drm_dp_dpcd_set_powered(struct drm_dp_aux *aux, bool powered); +void drm_dp_dpcd_set_probe(struct drm_dp_aux *aux, bool enable); ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size); ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size); /** + * drm_dp_dpcd_read_data() - read a series of bytes from the DPCD + * @aux: DisplayPort AUX channel (SST or MST) + * @offset: address of the (first) register to read + * @buffer: buffer to store the register values + * @size: number of bytes in @buffer + * + * Returns zero (0) on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +static inline int drm_dp_dpcd_read_data(struct drm_dp_aux *aux, + unsigned int offset, + void *buffer, size_t size) +{ + int ret; + + ret = drm_dp_dpcd_read(aux, offset, buffer, size); + if (ret < 0) + return ret; + if (ret < size) + return -EPROTO; + + return 0; +} + +/** + * drm_dp_dpcd_write_data() - write a series of bytes to the DPCD + * @aux: DisplayPort AUX channel (SST or MST) + * @offset: address of the (first) register to write + * @buffer: buffer containing the values to write + * @size: number of bytes in @buffer + * + * Returns zero (0) on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +static inline int drm_dp_dpcd_write_data(struct drm_dp_aux *aux, + unsigned int offset, + void *buffer, size_t size) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, offset, buffer, size); + if (ret < 0) + return ret; + if (ret < size) + return -EPROTO; + + return 0; +} + +/** * drm_dp_dpcd_readb() - read a single byte from the DPCD * @aux: DisplayPort AUX channel * @offset: address of the register to read * @valuep: location where the value of the register will be stored * * Returns the number of bytes transferred (1) on success, or a negative - * error code on failure. + * error code on failure. In most of the cases you should be using + * drm_dp_dpcd_read_byte() instead. */ static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, unsigned int offset, u8 *valuep) @@ -547,7 +632,8 @@ static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, * @value: value to write to the register * * Returns the number of bytes transferred (1) on success, or a negative - * error code on failure. + * error code on failure. In most of the cases you should be using + * drm_dp_dpcd_write_byte() instead. */ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, unsigned int offset, u8 value) @@ -555,6 +641,34 @@ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, return drm_dp_dpcd_write(aux, offset, &value, 1); } +/** + * drm_dp_dpcd_read_byte() - read a single byte from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to read + * @valuep: location where the value of the register will be stored + * + * Returns zero (0) on success, or a negative error code on failure. + */ +static inline int drm_dp_dpcd_read_byte(struct drm_dp_aux *aux, + unsigned int offset, u8 *valuep) +{ + return drm_dp_dpcd_read_data(aux, offset, valuep, 1); +} + +/** + * drm_dp_dpcd_write_byte() - write a single byte to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to write + * @value: value to write to the register + * + * Returns zero (0) on success, or a negative error code on failure. + */ +static inline int drm_dp_dpcd_write_byte(struct drm_dp_aux *aux, + unsigned int offset, u8 value) +{ + return drm_dp_dpcd_write_data(aux, offset, &value, 1); +} + int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, u8 dpcd[DP_RECEIVER_CAP_SIZE]); @@ -564,6 +678,13 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, enum drm_dp_phy dp_phy, u8 link_status[DP_LINK_STATUS_SIZE]); +int drm_dp_link_power_up(struct drm_dp_aux *aux, unsigned char revision); +int drm_dp_link_power_down(struct drm_dp_aux *aux, unsigned char revision); + +int drm_dp_dpcd_write_payload(struct drm_dp_aux *aux, + int vcpid, u8 start_time_slot, u8 time_slot_count); +int drm_dp_dpcd_clear_payload(struct drm_dp_aux *aux); +int drm_dp_dpcd_poll_act_handled(struct drm_dp_aux *aux, int timeout_ms); bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, u8 real_edid_checksum); @@ -623,9 +744,12 @@ int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux, u8 caps[DP_LTTPR_PHY_CAP_SIZE]); int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]); int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable); +int drm_dp_lttpr_init(struct drm_dp_aux *aux, int lttpr_count); int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +void drm_dp_lttpr_wake_timeout_setup(struct drm_dp_aux *aux, bool transparent_mode); void drm_dp_remote_aux_init(struct drm_dp_aux *aux); void drm_dp_aux_init(struct drm_dp_aux *aux); @@ -656,6 +780,8 @@ struct drm_dp_desc { int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, bool is_branch); +int drm_dp_dump_lttpr_desc(struct drm_dp_aux *aux, enum drm_dp_phy dp_phy); + /** * enum drm_dp_quirk - Display Port sink/branch device specific quirks * @@ -707,6 +833,15 @@ enum drm_dp_quirk { * requires enabling DSC. */ DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC, + /** + * @DP_DPCD_QUIRK_DSC_THROUGHPUT_BPP_LIMIT: + * + * The device doesn't support DSC decompression at the maximum DSC + * pixel throughput and compressed bpp it indicates via its DPCD DSC + * capabilities. The compressed bpp must be limited above a device + * specific DSC pixel throughput. + */ + DP_DPCD_QUIRK_DSC_THROUGHPUT_BPP_LIMIT, }; /** @@ -730,6 +865,7 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register? * @aux_enable: Does the panel support the AUX enable cap? * @aux_set: Does the panel support setting the brightness through AUX? + * @luminance_set: Does the panel support setting the brightness through AUX using luminance values? * * This structure contains various data about an eDP backlight, which can be populated by using * drm_edp_backlight_init(). @@ -737,21 +873,23 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) struct drm_edp_backlight_info { u8 pwmgen_bit_count; u8 pwm_freq_pre_divider; - u16 max; + u32 max; bool lsb_reg_used : 1; bool aux_enable : 1; bool aux_set : 1; + bool luminance_set : 1; }; int drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl, + u32 max_luminance, u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE], - u16 *current_level, u8 *current_mode); + u32 *current_level, u8 *current_mode, bool need_luminance); int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, - u16 level); + u32 level); int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, - u16 level); + u32 level); int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl); #if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ @@ -869,5 +1007,7 @@ int drm_dp_bw_channel_coding_efficiency(bool is_uhbr); int drm_dp_max_dprx_data_rate(int max_link_rate, int max_lanes); ssize_t drm_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc, struct dp_sdp *sdp); +int drm_dp_link_symbol_cycles(int lane_count, int pixels, int dsc_slice_count, + int bpp_x16, int symbol_size, bool is_mst); #endif /* _DRM_DP_HELPER_H_ */ |