diff options
Diffstat (limited to 'include/drm/drm_mipi_dsi.h')
| -rw-r--r-- | include/drm/drm_mipi_dsi.h | 271 |
1 files changed, 238 insertions, 33 deletions
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h index c9df0407980c..3aba7b380c8d 100644 --- a/include/drm/drm_mipi_dsi.h +++ b/include/drm/drm_mipi_dsi.h @@ -10,6 +10,7 @@ #define __DRM_MIPI_DSI_H__ #include <linux/device.h> +#include <linux/delay.h> struct mipi_dsi_host; struct mipi_dsi_device; @@ -129,8 +130,6 @@ struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node); #define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) /* disable hsync-active area */ #define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) -/* flush display FIFO on vsync pulse */ -#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) /* disable EoT packets in HS mode */ #define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) /* device supports non-continuous clock behavior (DSI spec 5.6.1) */ @@ -168,6 +167,7 @@ struct mipi_dsi_device_info { * struct mipi_dsi_device - DSI peripheral device * @host: DSI host for this peripheral * @dev: driver model device node for this peripheral + * @attached: the DSI device has been successfully attached * @name: DSI peripheral chip type * @channel: virtual channel assigned to the peripheral * @format: pixel format for video mode @@ -184,6 +184,7 @@ struct mipi_dsi_device_info { struct mipi_dsi_device { struct mipi_dsi_host *host; struct device dev; + bool attached; char name[DSI_DEV_NAME_SIZE]; unsigned int channel; @@ -195,10 +196,34 @@ struct mipi_dsi_device { struct drm_dsc_config *dsc; }; +/** + * struct mipi_dsi_multi_context - Context to call multiple MIPI DSI funcs in a row + */ +struct mipi_dsi_multi_context { + /** + * @dsi: Pointer to the MIPI DSI device + */ + struct mipi_dsi_device *dsi; + + /** + * @accum_err: Storage for the accumulated error over the multiple calls + * + * Init to 0. If a function encounters an error then the error code + * will be stored here. If you call a function and this points to a + * non-zero value then the function will be a noop. This allows calling + * a function many times in a row and just checking the error at the + * end to see if any of them failed. + */ + int accum_err; +}; + #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:" #define to_mipi_dsi_device(__dev) container_of_const(__dev, struct mipi_dsi_device, dev) +extern const struct bus_type mipi_dsi_bus_type; +#define dev_is_mipi_dsi(dev) ((dev)->bus == &mipi_dsi_bus_type) + /** * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any * given pixel format defined by the MIPI DSI @@ -224,6 +249,12 @@ static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) return -EINVAL; } +enum mipi_dsi_compression_algo { + MIPI_DSI_COMPRESSION_DSC = 0, + MIPI_DSI_COMPRESSION_VENDOR = 3, + /* other two values are reserved, DSI 1.3 */ +}; + struct mipi_dsi_device * mipi_dsi_device_register_full(struct mipi_dsi_host *host, const struct mipi_dsi_device_info *info); @@ -239,14 +270,45 @@ int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, u16 value); -ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable); -ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, - const struct drm_dsc_picture_parameter_set *pps); +int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable); +int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable, + enum mipi_dsi_compression_algo algo, + unsigned int pps_selector); +int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, + const struct drm_dsc_picture_parameter_set *pps); + +void mipi_dsi_compression_mode_ext_multi(struct mipi_dsi_multi_context *ctx, + bool enable, + enum mipi_dsi_compression_algo algo, + unsigned int pps_selector); +void mipi_dsi_compression_mode_multi(struct mipi_dsi_multi_context *ctx, + bool enable); +void mipi_dsi_picture_parameter_set_multi(struct mipi_dsi_multi_context *ctx, + const struct drm_dsc_picture_parameter_set *pps); ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, size_t size); +void mipi_dsi_generic_write_multi(struct mipi_dsi_multi_context *ctx, + const void *payload, size_t size); +void mipi_dsi_dual_generic_write_multi(struct mipi_dsi_multi_context *ctx, + struct mipi_dsi_device *dsi1, + struct mipi_dsi_device *dsi2, + const void *payload, size_t size); ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, size_t num_params, void *data, size_t size); +u32 drm_mipi_dsi_get_input_bus_fmt(enum mipi_dsi_pixel_format dsi_format); + +#define mipi_dsi_msleep(ctx, delay) \ + do { \ + if (!(ctx)->accum_err) \ + msleep(delay); \ + } while (0) + +#define mipi_dsi_usleep_range(ctx, min, max) \ + do { \ + if (!(ctx)->accum_err) \ + usleep_range(min, max); \ + } while (0) /** * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode @@ -268,10 +330,20 @@ enum mipi_dsi_dcs_tear_mode { ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, const void *data, size_t len); +int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi, + const void *data, size_t len); +void mipi_dsi_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx, + const void *data, size_t len); +void mipi_dsi_dual_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx, + struct mipi_dsi_device *dsi1, + struct mipi_dsi_device *dsi2, + const void *data, size_t len); ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, const void *data, size_t len); ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, size_t len); +void mipi_dsi_dcs_read_multi(struct mipi_dsi_multi_context *ctx, u8 cmd, + void *data, size_t len); int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); @@ -284,7 +356,6 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, u16 end); int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, u16 end); -int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, enum mipi_dsi_dcs_tear_mode mode); int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); @@ -298,42 +369,176 @@ int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi, int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi, u16 *brightness); +void mipi_dsi_dcs_nop_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_enter_sleep_mode_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_exit_sleep_mode_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx, + enum mipi_dsi_dcs_tear_mode mode); +void mipi_dsi_turn_on_peripheral_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_soft_reset_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_display_brightness_multi(struct mipi_dsi_multi_context *ctx, + u16 brightness); +void mipi_dsi_dcs_set_pixel_format_multi(struct mipi_dsi_multi_context *ctx, + u8 format); +void mipi_dsi_dcs_set_column_address_multi(struct mipi_dsi_multi_context *ctx, + u16 start, u16 end); +void mipi_dsi_dcs_set_page_address_multi(struct mipi_dsi_multi_context *ctx, + u16 start, u16 end); +void mipi_dsi_dcs_set_tear_scanline_multi(struct mipi_dsi_multi_context *ctx, + u16 scanline); +void mipi_dsi_dcs_set_tear_off_multi(struct mipi_dsi_multi_context *ctx); + +/** + * mipi_dsi_generic_write_seq_multi - transmit data using a generic write packet + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @ctx: Context for multiple DSI transactions + * @seq: buffer containing the payload + */ +#define mipi_dsi_generic_write_seq_multi(ctx, seq...) \ + do { \ + static const u8 d[] = { seq }; \ + mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \ + } while (0) + /** - * mipi_dsi_generic_write_seq - transmit data using a generic write packet - * @dsi: DSI peripheral device + * mipi_dsi_generic_write_var_seq_multi - transmit non-constant data using a + * generic write packet + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @ctx: Context for multiple DSI transactions * @seq: buffer containing the payload */ -#define mipi_dsi_generic_write_seq(dsi, seq...) \ - do { \ - static const u8 d[] = { seq }; \ - struct device *dev = &dsi->dev; \ - int ret; \ - ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \ - if (ret < 0) { \ - dev_err_ratelimited(dev, "transmit data failed: %d\n", \ - ret); \ - return ret; \ - } \ +#define mipi_dsi_generic_write_var_seq_multi(ctx, seq...) \ + do { \ + const u8 d[] = { seq }; \ + mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \ + } while (0) + +/** + * mipi_dsi_dcs_write_seq_multi - transmit a DCS command with payload + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @ctx: Context for multiple DSI transactions + * @cmd: Command + * @seq: buffer containing data to be transmitted + */ +#define mipi_dsi_dcs_write_seq_multi(ctx, cmd, seq...) \ + do { \ + static const u8 d[] = { cmd, seq }; \ + mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \ } while (0) /** - * mipi_dsi_dcs_write_seq - transmit a DCS command with payload - * @dsi: DSI peripheral device + * mipi_dsi_dcs_write_var_seq_multi - transmit a DCS command with non-constant + * payload + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @ctx: Context for multiple DSI transactions * @cmd: Command * @seq: buffer containing data to be transmitted */ -#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...) \ - do { \ - static const u8 d[] = { cmd, seq }; \ - struct device *dev = &dsi->dev; \ - int ret; \ - ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ - if (ret < 0) { \ - dev_err_ratelimited( \ - dev, "sending command %#02x failed: %d\n", \ - cmd, ret); \ - return ret; \ - } \ +#define mipi_dsi_dcs_write_var_seq_multi(ctx, cmd, seq...) \ + do { \ + const u8 d[] = { cmd, seq }; \ + mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \ + } while (0) + +/** + * mipi_dsi_dual - send the same MIPI DSI command to two interfaces + * + * This macro will send the specified MIPI DSI command twice, once per each of + * the two interfaces supplied. This is useful for reducing duplication of code + * in panel drivers which use two parallel serial interfaces. + * + * Note that the _func parameter cannot accept a macro such as + * mipi_dsi_generic_write_multi() or mipi_dsi_dcs_write_buffer_multi(). See + * mipi_dsi_dual_generic_write_multi() and + * mipi_dsi_dual_dcs_write_buffer_multi() instead. + * + * WARNING: This macro reuses the _func argument and the optional trailing + * arguments twice each, which may cause unintended side effects. For example, + * adding the postfix increment ++ operator to one of the arguments to be + * passed to _func will cause the variable to be incremented twice instead of + * once and the variable will be its original value + 1 when sent to _dsi2. + * + * @_func: MIPI DSI function to pass context and arguments into + * @_ctx: Context for multiple DSI transactions + * @_dsi1: First DSI interface to act as recipient of the MIPI DSI command + * @_dsi2: Second DSI interface to act as recipient of the MIPI DSI command + * @...: Arguments to pass to MIPI DSI function or macro + */ + +#define mipi_dsi_dual(_func, _ctx, _dsi1, _dsi2, ...) \ + do { \ + struct mipi_dsi_multi_context *_ctxcpy = (_ctx); \ + _ctxcpy->dsi = (_dsi1); \ + (_func)(_ctxcpy, ##__VA_ARGS__); \ + _ctxcpy->dsi = (_dsi2); \ + (_func)(_ctxcpy, ##__VA_ARGS__); \ + } while (0) + +/** + * mipi_dsi_dual_generic_write_seq_multi - transmit data using a generic write + * packet to two dsi interfaces, one after the other + * + * This macro will send the specified generic packet twice, once per each of + * the two interfaces supplied. This is useful for reducing duplication of code + * in panel drivers which use two parallel serial interfaces. + * + * Note that if an error occurs while transmitting the packet to the first DSI + * interface, the packet will not be sent to the second DSI interface. + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @_ctx: Context for multiple DSI transactions + * @_dsi1: First DSI interface to act as recipient of packet + * @_dsi2: Second DSI interface to act as recipient of packet + * @_seq: buffer containing the payload + */ +#define mipi_dsi_dual_generic_write_seq_multi(_ctx, _dsi1, _dsi2, _seq...) \ + do { \ + static const u8 d[] = { _seq }; \ + mipi_dsi_dual_generic_write_multi(_ctx, _dsi1, _dsi2, d, \ + ARRAY_SIZE(d)); \ + } while (0) + +/** + * mipi_dsi_dual_dcs_write_seq_multi - transmit a DCS command with payload to + * two dsi interfaces, one after the other + * + * This macro will send the specified DCS command with payload twice, once per + * each of the two interfaces supplied. This is useful for reducing duplication + * of code in panel drivers which use two parallel serial interfaces. + * + * Note that if an error occurs while transmitting the payload to the first DSI + * interface, the payload will not be sent to the second DSI interface. + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @_ctx: Context for multiple DSI transactions + * @_dsi1: First DSI interface to act as recipient of packet + * @_dsi2: Second DSI interface to act as recipient of packet + * @_cmd: Command + * @_seq: buffer containing the payload + */ +#define mipi_dsi_dual_dcs_write_seq_multi(_ctx, _dsi1, _dsi2, _cmd, _seq...) \ + do { \ + static const u8 d[] = { _cmd, _seq }; \ + mipi_dsi_dual_dcs_write_buffer_multi(_ctx, _dsi1, _dsi2, d, \ + ARRAY_SIZE(d)); \ } while (0) /** |