summaryrefslogtreecommitdiff
path: root/include/linux/brcmphy.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/brcmphy.h')
-rw-r--r--include/linux/brcmphy.h60
1 files changed, 60 insertions, 0 deletions
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 677b4f01b2d0..6f76277baf39 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -13,10 +13,17 @@
#define PHY_ID_BCM5461 0x002060c0
#define PHY_ID_BCM57780 0x03625d90
+#define PHY_ID_BCM7366 0x600d8490
+#define PHY_ID_BCM7439 0x600d8480
+#define PHY_ID_BCM7445 0x600d8510
+#define PHY_ID_BCM7XXX_28 0x600d8400
+
#define PHY_BCM_OUI_MASK 0xfffffc00
#define PHY_BCM_OUI_1 0x00206000
#define PHY_BCM_OUI_2 0x0143bc00
#define PHY_BCM_OUI_3 0x03625c00
+#define PHY_BCM_OUI_4 0x600d0000
+#define PHY_BCM_OUI_5 0x03625e00
#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001
@@ -31,6 +38,59 @@
#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000
#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000
#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000
+/* Broadcom BCM7xxx specific workarounds */
+#define PHY_BRCM_100MBPS_WAR 0x00010000
#define PHY_BCM_FLAGS_VALID 0x80000000
+/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */
+#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */
+#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */
+#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */
+
+#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */
+#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */
+
+#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
+#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
+#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
+
+#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */
+#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */
+#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */
+#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */
+#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */
+#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */
+#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */
+#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */
+#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */
+#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */
+#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */
+#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */
+#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */
+#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */
+#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */
+#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */
+#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */
+#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */
+
+#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
+#define MII_BCM54XX_SHD_WRITE 0x8000
+#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
+#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
+
+/*
+ * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18)
+ */
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
+#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400
+#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
+
+#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
+#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
+
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
+
#endif /* _LINUX_BRCMPHY_H */