diff options
Diffstat (limited to 'include/linux/gpio/regmap.h')
| -rw-r--r-- | include/linux/gpio/regmap.h | 27 |
1 files changed, 25 insertions, 2 deletions
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h index a9f7b7faf57b..12d154732ca9 100644 --- a/include/linux/gpio/regmap.h +++ b/include/linux/gpio/regmap.h @@ -6,6 +6,7 @@ struct device; struct fwnode_handle; struct gpio_regmap; +struct gpio_chip; struct irq_domain; struct regmap; @@ -21,7 +22,7 @@ struct regmap; * If not given, the fwnode of the parent is used. * @label: (Optional) Descriptive name for GPIO controller. * If not given, the name of the device is used. - * @ngpio: Number of GPIOs + * @ngpio: (Optional) Number of GPIOs * @names: (Optional) Array of names for gpios * @reg_dat_base: (Optional) (in) register base address * @reg_set_base: (Optional) set register base address @@ -30,16 +31,27 @@ struct regmap; * @reg_dir_out_base: (Optional) out setting register base address * @reg_stride: (Optional) May be set if the registers (of the * same type, dat, set, etc) are not consecutive. - * @ngpio_per_reg: Number of GPIOs per register + * @ngpio_per_reg: (Optional) Number of GPIOs per register * @irq_domain: (Optional) IRQ domain if the controller is * interrupt-capable * @reg_mask_xlate: (Optional) Translates base address and GPIO * offset to a register/bitmask pair. If not * given the default gpio_regmap_simple_xlate() * is used. + * @fixed_direction_output: + * (Optional) Bitmap representing the fixed direction of + * the GPIO lines. Useful when there are GPIO lines with a + * fixed direction mixed together in the same register. * @drvdata: (Optional) Pointer to driver specific data which is * not used by gpio-remap but is provided "as is" to the * driver callback(s). + * @init_valid_mask: (Optional) Routine to initialize @valid_mask, to be used + * if not all GPIOs are valid. + * @regmap_irq_chip: (Optional) Pointer on an regmap_irq_chip structure. If + * set, a regmap-irq device will be created and the IRQ + * domain will be set accordingly. + * @regmap_irq_line: (Optional) The IRQ the device uses to signal interrupts. + * @regmap_irq_flags: (Optional) The IRQF_ flags to use for the interrupt. * * The ->reg_mask_xlate translates a given base address and GPIO offset to * register and mask pair. The base address is one of the given register @@ -77,11 +89,22 @@ struct gpio_regmap_config { int reg_stride; int ngpio_per_reg; struct irq_domain *irq_domain; + unsigned long *fixed_direction_output; + +#ifdef CONFIG_REGMAP_IRQ + struct regmap_irq_chip *regmap_irq_chip; + int regmap_irq_line; + unsigned long regmap_irq_flags; +#endif int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, unsigned int offset, unsigned int *reg, unsigned int *mask); + int (*init_valid_mask)(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios); + void *drvdata; }; |